[MacPorts] #25172: dsniff failing to install on 10.5.8

MacPorts noreply at macports.org
Mon Jun 7 19:05:28 PDT 2010


#25172: dsniff failing to install on 10.5.8
----------------------------------+-----------------------------------------
 Reporter:  wustenfuchs@…         |       Owner:  macports-tickets@…                   
     Type:  defect                |      Status:  new                                  
 Priority:  Normal                |   Milestone:                                       
Component:  ports                 |     Version:  1.8.99                               
 Keywords:  dsniff build failure  |        Port:  dsniff                               
----------------------------------+-----------------------------------------
 Dsniff failing to build on intel mac running 10.5.8 / macports 1.9.0-rc2.
 Command line output as follows:

 ROMMEL:~ Rommel$ sudo port -ds install dsniff
 Password:
 DEBUG: Found port in file:///opt/mports/trunk/dports/net/dsniff
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/net/dsniff
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port dsniff.
 DEBUG: Requested variant i386 is not provided by port dsniff.
 DEBUG: Requested variant macosx is not provided by port dsniff.
 DEBUG: Attempting ln -sf
 /opt/local/var/macports/build/_opt_mports_trunk_dports_net_dsniff/work
 /opt/mports/trunk/dports/net/dsniff/work
 DEBUG: Found port in file:///opt/mports/trunk/dports/net/libpcap
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpcap 1.0.0_1 exists in the ports tree
 DEBUG: libpcap 1.0.0_1  is the latest installed
 DEBUG: libpcap 1.0.0_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/net/libpcap
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port libpcap.
 DEBUG: Requested variant i386 is not provided by port libpcap.
 DEBUG: Requested variant macosx is not provided by port libpcap.
 DEBUG: No need to upgrade! libpcap 1.0.0_1 >= libpcap 1.0.0_1
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/openssl
 DEBUG: epoch: in tree: 1 installed: 1
 DEBUG: openssl 0.9.8o_0 exists in the ports tree
 DEBUG: openssl 0.9.8o_0 +darwin is the latest installed
 DEBUG: openssl 0.9.8o_0 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/devel/openssl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port openssl.
 DEBUG: Requested variant macosx is not provided by port openssl.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Found port in file:///opt/mports/trunk/dports/archivers/zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.5_0 exists in the ports tree
 DEBUG: zlib 1.2.5_0  is the latest installed
 DEBUG: zlib 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/archivers/zlib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port zlib.
 DEBUG: Requested variant i386 is not provided by port zlib.
 DEBUG: Requested variant macosx is not provided by port zlib.
 DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
 DEBUG: No need to upgrade! openssl 0.9.8o_0 >= openssl 0.9.8o_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-libXmu
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
 DEBUG: xorg-libXmu 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 libXmu
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
 DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
 DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.25_0 exists in the ports tree
 DEBUG: pkgconfig 0.25_0  is the latest installed
 DEBUG: pkgconfig 0.25_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/mports/trunk/dports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant i386 is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: No need to upgrade! pkgconfig 0.25_0 >= pkgconfig 0.25_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-libXext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXext 1.1.2_0 exists in the ports tree
 DEBUG: xorg-libXext 1.1.2_0  is the latest installed
 DEBUG: xorg-libXext 1.1.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 libXext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXext.
 DEBUG: Requested variant i386 is not provided by port xorg-libXext.
 DEBUG: Requested variant macosx is not provided by port xorg-libXext.
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3.4_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3.4_0  is the latest installed
 DEBUG: xorg-libX11 1.3.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.8.0_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.8.0_0  is the latest installed
 DEBUG: xorg-util-macros 1.8.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-util-
 macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.8.0_0 >= xorg-util-macros
 1.8.0_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-
 xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.17_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.17_0  is the latest installed
 DEBUG: xorg-xproto 7.0.17_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0  is the latest installed
 DEBUG: xorg-libXau 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant i386 is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
 DEBUG: No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0
 DEBUG: No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-libXt
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXt 1.0.8_0 exists in the ports tree
 DEBUG: xorg-libXt 1.0.8_0  is the latest installed
 DEBUG: xorg-libXt 1.0.8_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-libXt
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXt.
 DEBUG: Requested variant i386 is not provided by port xorg-libXt.
 DEBUG: Requested variant macosx is not provided by port xorg-libXt.
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-libsm
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libsm 1.1.1_0  is the latest installed
 DEBUG: xorg-libsm 1.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-libsm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libsm.
 DEBUG: Requested variant i386 is not provided by port xorg-libsm.
 DEBUG: Requested variant macosx is not provided by port xorg-libsm.
 DEBUG: Found port in file:///opt/mports/trunk/dports/x11/xorg-libice
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
 DEBUG: xorg-libice 1.0.6_0  is the latest installed
 DEBUG: xorg-libice 1.0.6_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/x11/xorg-
 libice
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libice.
 DEBUG: Requested variant i386 is not provided by port xorg-libice.
 DEBUG: Requested variant macosx is not provided by port xorg-libice.
 DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
 DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
 DEBUG: No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0
 DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/net/libnids
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libnids 1.23_2 exists in the ports tree
 DEBUG: libnids 1.23_2  is the latest installed
 DEBUG: libnids 1.23_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/net/libnids
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libnids.
 DEBUG: Requested variant i386 is not provided by port libnids.
 DEBUG: Requested variant macosx is not provided by port libnids.
 DEBUG: Found port in file:///opt/mports/trunk/dports/net/libnet11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libnet11 1.1.4_0 exists in the ports tree
 DEBUG: libnet11 1.1.4_0  is the latest installed
 DEBUG: libnet11 1.1.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/net/libnet11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libnet11.
 DEBUG: Requested variant i386 is not provided by port libnet11.
 DEBUG: Requested variant macosx is not provided by port libnet11.
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.65_1 exists in the ports tree
 DEBUG: autoconf 2.65_1  is the latest installed
 DEBUG: autoconf 2.65_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Found port in file:///opt/mports/trunk/dports/lang/perl5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0  is the latest installed
 DEBUG: perl5 5.8.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Found port in file:///opt/mports/trunk/dports/lang/perl5.8
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.8 5.8.9_3 exists in the ports tree
 DEBUG: perl5.8 5.8.9_3  is the latest installed
 DEBUG: perl5.8 5.8.9_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.14_0 exists in the ports tree
 DEBUG: m4 1.4.14_0  is the latest installed
 DEBUG: m4 1.4.14_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.38.2_0 exists in the ports tree
 DEBUG: help2man 1.38.2_0  is the latest installed
 DEBUG: help2man 1.38.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/mports/trunk/dports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Found port in file:///opt/mports/trunk/dports/perl/p5-locale-
 gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_2  is the latest installed
 DEBUG: p5-locale-gettext 1.05_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: Re-registering default for configure.universal_args
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.18.1.1_0 exists in the ports tree
 DEBUG: gettext 0.18.1.1_0  is the latest installed
 DEBUG: gettext 0.18.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in file:///opt/mports/trunk/dports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13.1_0 exists in the ports tree
 DEBUG: libiconv 1.13.1_0  is the latest installed
 DEBUG: libiconv 1.13.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/mports/trunk/dports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0  is the latest installed
 DEBUG: ncurses 5.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0  is the latest installed
 DEBUG: ncursesw 5.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/mports/trunk/dports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
 1.05_2
 DEBUG: No need to upgrade! help2man 1.38.2_0 >= help2man 1.38.2_0
 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11.1_0 exists in the ports tree
 DEBUG: automake 1.11.1_0  is the latest installed
 DEBUG: automake 1.11.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
 DEBUG: Found port in file:///opt/mports/trunk/dports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.8_0 exists in the ports tree
 DEBUG: libtool 2.2.8_0 +darwin is the latest installed
 DEBUG: libtool 2.2.8_0 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory: /opt/mports/trunk/dports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/mports/trunk/dports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! libtool 2.2.8_0 >= libtool 2.2.8_0
 DEBUG: No need to upgrade! libnet11 1.1.4_0 >= libnet11 1.1.4_0
 DEBUG: No need to upgrade! libnids 1.23_2 >= libnids 1.23_2
 --->  Computing dependencies for dsniff
 DEBUG: Checking for conflicts against dsniff
 DEBUG: Searching for dependency: dsniff-devel
 DEBUG: Didn't find receipt, going to depspec regex for: dsniff-devel
 DEBUG: Searching for dependency: libpcap
 DEBUG: Found Dependency: receipt exists for libpcap
 DEBUG: Searching for dependency: openssl
 DEBUG: Found Dependency: receipt exists for openssl
 DEBUG: Searching for dependency: xorg-libXmu
 DEBUG: Found Dependency: receipt exists for xorg-libXmu
 DEBUG: Searching for dependency: libnids
 DEBUG: Found Dependency: receipt exists for libnids
 DEBUG: Executing org.macports.main (dsniff)
 --->  Fetching dsniff
 DEBUG: Executing org.macports.fetch (dsniff)
 --->  Verifying checksum(s) for dsniff
 DEBUG: Executing org.macports.checksum (dsniff)
 --->  Checksumming dsniff-2.3.tar.gz
 DEBUG: Correct (md5) checksum for dsniff-2.3.tar.gz
 --->  Extracting dsniff
 DEBUG: Executing org.macports.extract (dsniff)
 --->  Extracting dsniff-2.3.tar.gz
 DEBUG: setting option extract.args to
 /opt/local/var/macports/distfiles/dsniff/dsniff-2.3.tar.gz
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_mports_trunk_dports_net_dsniff/work"
 && /usr/bin/gzip -dc
 /opt/local/var/macports/distfiles/dsniff/dsniff-2.3.tar.gz |
 /usr/bin/gnutar --no-same-owner -xf -'
 DEBUG: Executing org.macports.patch (dsniff)
 --->  Applying patches to dsniff
 --->  Applying /opt/mports/trunk/dports/net/dsniff/files/patch-pcaputil.c
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_mports_trunk_dports_net_dsniff/work/dsniff-2.3"
 && /usr/bin/patch -p0'
 patching file pcaputil.c
 --->  Applying /opt/mports/trunk/dports/net/dsniff/files/patch-sshcrypto.c
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_mports_trunk_dports_net_dsniff/work/dsniff-2.3"
 && /usr/bin/patch -p0'
 patching file sshcrypto.c
 --->  Configuring dsniff
 DEBUG: Using compiler 'Mac OS X gcc 4.0'
 DEBUG: Executing org.macports.configure (dsniff)
 DEBUG: Environment: CFLAGS='-O2 -DBIND_8_COMPAT -arch i386'
 CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch i386'
 MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2 -m32'
 LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2 -m32'
 INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch i386' FFLAGS='-O2 -m32'
 CC='/usr/bin/gcc-4.0'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_mports_trunk_dports_net_dsniff/work/dsniff-2.3"
 && ./configure --prefix=/opt/local --mandir=/opt/local/share/man'
 creating cache ./config.cache
 checking for gcc... /usr/bin/gcc-4.0
 checking whether the C compiler (/usr/bin/gcc-4.0 -O2 -DBIND_8_COMPAT
 -arch i386 -L/opt/local/lib) works... yes
 checking whether the C compiler (/usr/bin/gcc-4.0 -O2 -DBIND_8_COMPAT
 -arch i386 -L/opt/local/lib) is a cross-compiler... no
 checking whether we are using GNU C... yes
 checking whether /usr/bin/gcc-4.0 accepts -g... yes
 checking for a BSD compatible install... /usr/bin/install -c
 checking for ranlib... ranlib
 checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
 checking for X... libraries , headers
 checking for dnet_ntoa in -ldnet... no
 checking for dnet_ntoa in -ldnet_stub... no
 checking for gethostbyname... yes
 checking for connect... yes
 checking for remove... yes
 checking for shmat... yes
 checking for IceConnectionNumber in -lICE... yes
 checking for ANSI C header files... yes
 checking for err.h... yes
 checking for fcntl.h... yes
 checking for sys/ioctl.h... yes
 checking for sys/queue.h... yes
 checking for unistd.h... yes
 checking for libgen.h... yes
 checking for net/if_tun.h... no
 checking for MIN and MAX in sys/param.h... yes
 checking for working const... yes
 checking for size_t... yes
 checking whether struct tm is in sys/time.h or time.h... time.h
 checking for u_int32_t... yes
 checking for u_int64_t... yes
 checking for in_addr_t... yes
 checking whether /usr/bin/gcc-4.0 needs -traditional... no
 checking for 8-bit clean memcmp... yes
 checking return type of signal handlers... void
 checking for strftime... yes
 checking for gethostname... yes
 checking for socket... yes
 checking for strdup... yes
 checking for strstr... yes
 checking for xdr_fhstatus in -lrpcsvc... no
 checking for socket in -lsocket... no
 checking for gethostbyname in -lnsl... no
 checking for dn_expand in -lresolv... yes
 checking for dirname... yes
 checking for strlcpy... yes
 checking for strlcat... yes
 checking for strsep... yes
 checking for MD5Update... no
 checking for warnx... yes
 checking for ether_ntoa... yes
 checking for Berkeley DB with 1.85 compatibility... yes
 checking for libpcap... yes
 checking for libnet... yes
 checking for libnids... yes
 checking whether libnids version is good... yes
 checking for OpenSSL... yes
 updating cache ./config.cache
 creating ./config.status
 creating Makefile
 creating config.h
 --->  Building dsniff
 DEBUG: Executing org.macports.build (dsniff)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_mports_trunk_dports_net_dsniff/work/dsniff-2.3"
 && /usr/bin/make -j1 all'
 /usr/bin/gcc-4.0 -O2 -DBIND_8_COMPAT -arch i386 -D_BSD_SOURCE
 -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP
 -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include
 -I/opt/local/include -I/opt/local/include  -I/opt/local/include
 -I./missing -c ./missing/dummy.c
 /usr/bin/gcc-4.0 -O2 -DBIND_8_COMPAT -arch i386 -D_BSD_SOURCE
 -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP
 -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include
 -I/opt/local/include -I/opt/local/include  -I/opt/local/include
 -I./missing -c ./missing/md5.c
 ar -cr libmissing.a dummy.o  md5.o
 ranlib: file: libmissing.a(dummy.o) has no symbols
 ranlib libmissing.a
 ranlib: file: libmissing.a(dummy.o) has no symbols
 /usr/bin/gcc-4.0 -O2 -DBIND_8_COMPAT -arch i386 -D_BSD_SOURCE
 -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP
 -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include
 -I/opt/local/include -I/opt/local/include  -I/opt/local/include
 -I./missing -c ./arpspoof.c
 ./arpspoof.c:25: warning: 'struct ether_addr' declared inside parameter
 list
 ./arpspoof.c:25: warning: its scope is only this definition or
 declaration, which is probably not what you want
 ./arpspoof.c:26: warning: 'struct ether_addr' declared inside parameter
 list
 ./arpspoof.c: In function 'arp_send':
 ./arpspoof.c:49: warning: passing argument 1 of 'libnet_get_hwaddr' from
 incompatible pointer type
 ./arpspoof.c:49: error: too many arguments to function 'libnet_get_hwaddr'
 ./arpspoof.c:58: warning: pointer targets in assignment differ in
 signedness
 ./arpspoof.c:60: warning: passing argument 6 of 'libnet_build_ethernet'
 from incompatible pointer type
 ./arpspoof.c:60: error: too few arguments to function
 'libnet_build_ethernet'
 ./arpspoof.c:64: error: 'ETH_H' undeclared (first use in this function)
 ./arpspoof.c:64: error: (Each undeclared identifier is reported only once
 ./arpspoof.c:64: error: for each function it appears in.)
 ./arpspoof.c:64: error: too few arguments to function 'libnet_build_arp'
 ./arpspoof.c:67: warning: passing argument 1 of 'ether_ntoa' from
 incompatible pointer type
 ./arpspoof.c:71: warning: passing argument 1 of 'ether_ntoa' from
 incompatible pointer type
 ./arpspoof.c:77: warning: passing argument 1 of 'ether_ntoa' from
 incompatible pointer type
 ./arpspoof.c:80: warning: passing argument 1 of 'ether_ntoa' from
 incompatible pointer type
 ./arpspoof.c: In function 'arp_find':
 ./arpspoof.c:114: warning: passing argument 2 of 'arp_cache_lookup' from
 incompatible pointer type
 ./arpspoof.c: In function 'main':
 ./arpspoof.c:181: warning: assignment makes pointer from integer without a
 cast
 make: *** [arpspoof.o] Error 1
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_mports_trunk_dports_net_dsniff/work/dsniff-2.3"
 && /usr/bin/make -j1 all " returned error 2
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_mports_trunk_dports_net_dsniff/work/dsniff-2.3"
 && /usr/bin/make -j1 all " returned error 2
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for dsniff):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: Status 1 encountered during processing.

 Any help is appreciated.  Cheers.

-- 
Ticket URL: <http://trac.macports.org/ticket/25172>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list