[MacPorts] #24859: py26-wxpython-2.8.9.1
MacPorts
noreply at macports.org
Tue Jun 15 03:59:28 PDT 2010
#24859: py26-wxpython-2.8.9.1
--------------------------------+-------------------------------------------
Reporter: jiangdzh@… | Owner: jameskyle@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: | Port: py26-wxpython
--------------------------------+-------------------------------------------
Comment(by jiangdzh@…):
Ticket Update: py26-wxpython-2.8.10.1
Today (June 15), I tried to install this port again, but failed with the
following error message. Could you please help me fix the problem? Many
thanks.
{{{
$ sudo port -d install py26-wxpython
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-wxpython
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant gtk provides gtk
DEBUG: Starting logging for py26-wxpython
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python26 2.6.5_2 exists in the ports tree
DEBUG: python26 2.6.5_2 is the latest installed
DEBUG: python26 2.6.5_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! python26 2.6.5_2 >= python26 2.6.5_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_0 exists in the ports tree
DEBUG: gettext 0.18.1.1_0 +universal is the latest installed
DEBUG: gettext 0.18.1.1_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10+universal is active
DEBUG: Merging existing variants '+darwin_10+universal' into variants
DEBUG: new fully merged portvariants: universal + darwin_10 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin_10 is not provided by port ncurses.
DEBUG: Executing variant universal provides universal
DEBUG: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though
installed variants "+darwin_10+universal" do not match "+universal".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10+universal is active
DEBUG: Merging existing variants '+darwin_10+universal' into variants
DEBUG: new fully merged portvariants: universal + darwin_10 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin_10 is not provided by port ncursesw.
DEBUG: Executing variant universal provides universal
DEBUG: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
though installed variants "+darwin_10+universal" do not match
"+universal".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0 is the latest installed
DEBUG: zlib 1.2.5_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8o_0 exists in the ports tree
DEBUG: openssl 0.9.8o_0 +darwin is the latest installed
DEBUG: openssl 0.9.8o_0 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port openssl.
DEBUG: Skipping upgrade since openssl 0.9.8o_0 >= openssl 0.9.8o_0, even
though installed variants "+darwin" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tk 8.5.8_0 exists in the ports tree
DEBUG: tk 8.5.8_0 +darwin is the latest installed
DEBUG: tk 8.5.8_0 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port tk.
DEBUG: Skipping upgrade since tk 8.5.8_0 >= tk 8.5.8_0, even though
installed variants "+darwin" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tcl 8.5.8_0 exists in the ports tree
DEBUG: tcl 8.5.8_0 +darwin is the latest installed
DEBUG: tcl 8.5.8_0 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port tcl.
DEBUG: Skipping upgrade since tcl 8.5.8_0 >= tcl 8.5.8_0, even though
installed variants "+darwin" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.1.14_0 exists in the ports tree
DEBUG: Xft2 2.1.14_0 is the latest installed
DEBUG: Xft2 2.1.14_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.6_0 exists in the ports tree
DEBUG: xrender 0.9.6_0 +universal is the latest installed
DEBUG: xrender 0.9.6_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3.4_0 exists in the ports tree
DEBUG: xorg-libX11 1.3.4_0 +universal is the latest installed
DEBUG: xorg-libX11 1.3.4_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0 is the latest installed
DEBUG: xorg-libXau 1.0.5_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.17_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.17_0 is the latest installed
DEBUG: xorg-xproto 7.0.17_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.4_0 is the latest installed
DEBUG: xorg-kbproto 1.0.4_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11_0 is the latest installed
DEBUG: xorg-renderproto 0.11_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
renderproto
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
0.11_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.12_0 exists in the ports tree
DEBUG: freetype 2.3.12_0 +macosx is the latest installed
DEBUG: freetype 2.3.12_0 +macosx is active
DEBUG: Merging existing variants '+macosx' into variants
DEBUG: new fully merged portvariants: macosx +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant macosx is not provided by port freetype.
DEBUG: Skipping upgrade since freetype 2.3.12_0 >= freetype 2.3.12_0, even
though installed variants "+macosx" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.8.0_0 exists in the ports tree
DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
DEBUG: fontconfig 2.8.0_0 +macosx is active
DEBUG: Merging existing variants '+macosx' into variants
DEBUG: new fully merged portvariants: macosx +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant macosx is not provided by port fontconfig.
DEBUG: Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig 2.8.0_0,
even though installed variants "+macosx" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
DEBUG: xorg-libXScrnSaver 1.2.0_0 is the latest installed
DEBUG: xorg-libXScrnSaver 1.2.0_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXScrnSaver
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-
libXScrnSaver 1.2.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1.2_0 exists in the ports tree
DEBUG: xorg-libXext 1.1.2_0 +universal is the latest installed
DEBUG: xorg-libXext 1.1.2_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0 is the latest installed
DEBUG: xorg-xextproto 7.1.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
7.1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-scrnsaverproto 1.2.0_0 is the latest installed
DEBUG: xorg-scrnsaverproto 1.2.0_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
scrnsaverproto
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-
scrnsaverproto 1.2.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.6.23.1_0 exists in the ports tree
DEBUG: sqlite3 3.6.23.1_0 is the latest installed
DEBUG: sqlite3 3.6.23.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! sqlite3 3.6.23.1_0 >= sqlite3 3.6.23.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.1.000_1 exists in the ports tree
DEBUG: readline 6.1.000_1 +darwin is the latest installed
DEBUG: readline 6.1.000_1 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port readline.
DEBUG: Skipping upgrade since readline 6.1.000_1 >= readline 6.1.000_1,
even though installed variants "+darwin" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: db46 4.6.21_6 exists in the ports tree
DEBUG: db46 4.6.21_6 is the latest installed
DEBUG: db46 4.6.21_6 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gdbm 1.8.3_2 exists in the ports tree
DEBUG: gdbm 1.8.3_2 is the latest installed
DEBUG: gdbm 1.8.3_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port bzip2.
DEBUG: Skipping upgrade since bzip2 1.0.5_3 >= bzip2 1.0.5_3, even though
installed variants "+darwin" do not match "".
---> Computing dependencies for py26-wxpython
DEBUG: Searching for dependency: python26
DEBUG: Found Dependency: receipt exists for python26
DEBUG: Searching for dependency: wxWidgets-python
DEBUG: Didn't find receipt, going to depspec regex for: wxWidgets-python
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics
/wxWidgets-python
DEBUG: OS darwin/10.3.2 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: Executing variant gtk provides gtk
DEBUG: Checking for conflicts against wxWidgets-python
DEBUG: Searching for dependency: wxgtk
DEBUG: Didn't find receipt, going to depspec regex for: wxgtk
DEBUG: Searching for dependency: jpeg
DEBUG: Found Dependency: receipt exists for jpeg
DEBUG: Searching for dependency: tiff
DEBUG: Found Dependency: receipt exists for tiff
DEBUG: Searching for dependency: libpng
DEBUG: Found Dependency: receipt exists for libpng
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: gtk2
DEBUG: Found Dependency: receipt exists for gtk2
---> Dependencies to be installed: wxWidgets-python
DEBUG: Starting logging for wxWidgets-python
DEBUG: Executing org.macports.main (wxWidgets-python)
DEBUG: Skipping completed org.macports.fetch (wxWidgets-python)
DEBUG: Skipping completed org.macports.checksum (wxWidgets-python)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (wxWidgets-python)
DEBUG: Skipping completed org.macports.patch (wxWidgets-python)
DEBUG: Skipping completed org.macports.configure (wxWidgets-python)
---> Building wxWidgets-python
DEBUG: build phase started at Tue Jun 15 11:48:55 BST 2010
DEBUG: Executing org.macports.build (wxWidgets-python)
DEBUG: port disallows a parallel build
DEBUG: Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_graphics_wxWidgets-python/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_graphics_wxWidgets-python/work/wxPython-
src-2.8.10.1/build" && /usr/bin/make'
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_graphics_wxWidgets-python/work/wxPython-
src-2.8.10.1/build/bk-deps /usr/bin/g++-4.2 -c -o gldll_gtk_glcanvas.o
-I./.pch/wxprec_gldll -D__WXGTK__ -I../src/regex -DWXUSINGDLL
-DWXMAKINGDLL_GL -dynamic -fPIC -DPIC -D_FILE_OFFSET_BITS=64
-D_LARGE_FILES
-I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_graphics_wxWidgets-python/work/wxPython-
src-2.8.10.1/build/lib/wx/include/gtk2-unicode-release-2.8 -I../include
-D_REENTRANT -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include
-I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
-I/opt/local/include/pango-1.0 -I/opt/local/include/gio-unix-2.0/
-I/opt/local/include -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include/pixman-1
-I/opt/local/include/freetype2 -I/opt/local/include/libpng12
-I/opt/local/include -I/opt/local/include -DWX_PRECOMP -Wall -Wundef -Wno-
ctor-dtor-privacy -O2 -fno-strict-aliasing -O2 -arch x86_64 -fno-common
../src/gtk/glcanvas.cpp
In file included from ../include/wx/glcanvas.h:54,
from ../src/gtk/glcanvas.cpp:17:
../include/wx/gtk/glcanvas.h:19:19: warning: GL/gl.h: No such file or
directory
../include/wx/gtk/glcanvas.h:20:20: warning: GL/glx.h: No such file or
directory
../include/wx/gtk/glcanvas.h:21:20: warning: GL/glu.h: No such file or
directory
In file included from ../include/wx/glcanvas.h:54,
from ../src/gtk/glcanvas.cpp:17:
../include/wx/gtk/glcanvas.h:47: error: 'GLXContext' does not name a type
../include/wx/gtk/glcanvas.h:124: error: ISO C++ forbids declaration of
'GLXFBConfig' with no type
../include/wx/gtk/glcanvas.h:124: error: expected ';' before '*' token
../src/gtk/glcanvas.cpp: In constructor
'wxGLContext::wxGLContext(wxWindow*, const wxGLContext*)':
../src/gtk/glcanvas.cpp:65: error: 'GLXFBConfig' was not declared in this
scope
../src/gtk/glcanvas.cpp:65: error: 'fbc' was not declared in this scope
../src/gtk/glcanvas.cpp:65: error: 'class wxGLCanvas' has no member named
'm_fbc'
../src/gtk/glcanvas.cpp:67: error: 'm_glContext' was not declared in this
scope
../src/gtk/glcanvas.cpp:67: error: 'GLX_RGBA_TYPE' was not declared in
this scope
../src/gtk/glcanvas.cpp:68: error: 'const class wxGLContext' has no member
named 'm_glContext'
../src/gtk/glcanvas.cpp:69: error: 'GL_TRUE' was not declared in this
scope
../src/gtk/glcanvas.cpp:69: error: 'glXCreateNewContext' was not declared
in this scope
../src/gtk/glcanvas.cpp:76: error: 'm_glContext' was not declared in this
scope
../src/gtk/glcanvas.cpp:77: error: 'const class wxGLContext' has no member
named 'm_glContext'
../src/gtk/glcanvas.cpp:78: error: 'GL_TRUE' was not declared in this
scope
../src/gtk/glcanvas.cpp:78: error: 'glXCreateContext' was not declared in
this scope
../src/gtk/glcanvas.cpp:81: error: 'm_glContext' was not declared in this
scope
../src/gtk/glcanvas.cpp: In destructor 'virtual
wxGLContext::~wxGLContext()':
../src/gtk/glcanvas.cpp:89: error: 'm_glContext' was not declared in this
scope
../src/gtk/glcanvas.cpp:91: error: 'm_glContext' was not declared in this
scope
../src/gtk/glcanvas.cpp:91: error: 'glXGetCurrentContext' was not declared
in this scope
../src/gtk/glcanvas.cpp:95: error: 'glXMakeContextCurrent' was not
declared in this scope
../src/gtk/glcanvas.cpp:98: error: 'glXMakeCurrent' was not declared in
this scope
../src/gtk/glcanvas.cpp:101: error: 'm_glContext' was not declared in this
scope
../src/gtk/glcanvas.cpp:101: error: 'glXDestroyContext' was not declared
in this scope
../src/gtk/glcanvas.cpp: In member function 'void
wxGLContext::SetCurrent(const wxGLCanvas&) const':
../src/gtk/glcanvas.cpp:106: error: 'm_glContext' was not declared in this
scope
../src/gtk/glcanvas.cpp:112: error: 'glXMakeContextCurrent' was not
declared in this scope
../src/gtk/glcanvas.cpp:115: error: 'glXMakeCurrent' was not declared in
this scope
../src/gtk/glcanvas.cpp: In member function 'bool
wxGLCanvas::Create(wxWindow*, const wxGLContext*, const wxGLCanvas*,
wxWindowID, const wxPoint&, const wxSize&, long int, const wxString&,
int*, const wxPalette&)':
../src/gtk/glcanvas.cpp:307: error: 'm_fbc' was not declared in this scope
../src/gtk/glcanvas.cpp:316: error: 'GLXFBConfig' was not declared in this
scope
../src/gtk/glcanvas.cpp:316: error: 'fbc' was not declared in this scope
../src/gtk/glcanvas.cpp:319: error: expected primary-expression before ')'
token
../src/gtk/glcanvas.cpp:319: error: expected `;' before 'static_cast'
../src/gtk/glcanvas.cpp:324: error: expected primary-expression before ')'
token
../src/gtk/glcanvas.cpp:324: error: expected `;' before 'wxGLCanvas'
../src/gtk/glcanvas.cpp:341: error: 'glXGetVisualFromFBConfig' was not
declared in this scope
../src/gtk/glcanvas.cpp: In destructor 'virtual
wxGLCanvas::~wxGLCanvas()':
../src/gtk/glcanvas.cpp:383: error: 'GLXFBConfig' was not declared in this
scope
../src/gtk/glcanvas.cpp:383: error: 'fbc' was not declared in this scope
../src/gtk/glcanvas.cpp:383: error: expected primary-expression before ')'
token
../src/gtk/glcanvas.cpp:383: error: expected `;' before 'm_fbc'
../src/gtk/glcanvas.cpp: In static member function 'static void*
wxGLCanvas::ChooseGLVisual(int*)':
../src/gtk/glcanvas.cpp:402: error: 'glXChooseVisual' was not declared in
this scope
../src/gtk/glcanvas.cpp: In static member function 'static void*
wxGLCanvas::ChooseGLFBC(int*)':
../src/gtk/glcanvas.cpp:413: error: 'glXChooseFBConfig' was not declared
in this scope
../src/gtk/glcanvas.cpp: In static member function 'static void
wxGLCanvas::GetGLAttribListFromWX(int*, int*)':
../src/gtk/glcanvas.cpp:428: error: 'GLX_RGBA' was not declared in this
scope
../src/gtk/glcanvas.cpp:429: error: 'GLX_DOUBLEBUFFER' was not declared in
this scope
../src/gtk/glcanvas.cpp:430: error: 'GLX_DEPTH_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:431: error: 'GLX_RED_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:432: error: 'GLX_GREEN_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:433: error: 'GLX_BLUE_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:434: error: 'GLX_ALPHA_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:448: error: 'GLX_RGBA' was not declared in this
scope
../src/gtk/glcanvas.cpp:451: error: 'GLX_BUFFER_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:455: error: 'GLX_LEVEL' was not declared in this
scope
../src/gtk/glcanvas.cpp:460: error: 'GLX_DOUBLEBUFFER' was not declared in
this scope
../src/gtk/glcanvas.cpp:465: error: 'GLX_DOUBLEBUFFER' was not declared in
this scope
../src/gtk/glcanvas.cpp:469: error: 'GLX_STEREO' was not declared in this
scope
../src/gtk/glcanvas.cpp:473: error: 'GLX_AUX_BUFFERS' was not declared in
this scope
../src/gtk/glcanvas.cpp:477: error: 'GLX_RED_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:481: error: 'GLX_GREEN_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:485: error: 'GLX_BLUE_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:489: error: 'GLX_ALPHA_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:493: error: 'GLX_DEPTH_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:497: error: 'GLX_STENCIL_SIZE' was not declared in
this scope
../src/gtk/glcanvas.cpp:501: error: 'GLX_ACCUM_RED_SIZE' was not declared
in this scope
../src/gtk/glcanvas.cpp:505: error: 'GLX_ACCUM_GREEN_SIZE' was not
declared in this scope
../src/gtk/glcanvas.cpp:509: error: 'GLX_ACCUM_BLUE_SIZE' was not declared
in this scope
../src/gtk/glcanvas.cpp:513: error: 'GLX_ACCUM_ALPHA_SIZE' was not
declared in this scope
../src/gtk/glcanvas.cpp: In static member function 'static void
wxGLCanvas::QueryGLXVersion()':
../src/gtk/glcanvas.cpp:531: error: 'glXQueryVersion' was not declared in
this scope
../src/gtk/glcanvas.cpp: In member function 'void
wxGLCanvas::SwapBuffers()':
../src/gtk/glcanvas.cpp:550: error: 'glXSwapBuffers' was not declared in
this scope
../src/gtk/glcanvas.cpp: In member function 'void
wxGLCanvas::SetColour(const wxChar*)':
../src/gtk/glcanvas.cpp:576: error: 'glColor3f' was not declared in this
scope
../src/gtk/glcanvas.cpp: In member function 'bool
wxGLApp::InitGLVisual(int*)':
../src/gtk/glcanvas.cpp:626: error: 'GLXFBConfig' was not declared in this
scope
../src/gtk/glcanvas.cpp:626: error: expected primary-expression before ')'
token
../src/gtk/glcanvas.cpp:626: error: expected `)' before 'm_glFBCInfo'
make: *** [gldll_gtk_glcanvas.o] Error 1
shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_graphics_wxWidgets-python/work/wxPython-
src-2.8.10.1/build" && /usr/bin/make " returned error 2
Error: Target org.macports.build returned: shell command failed
DEBUG: Backtrace: shell command failed
while executing
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for wxWidgets-python):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Log for wxWidgets-python is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_graphics_wxWidgets-python/main.log
Error: The following dependencies failed to build: wxWidgets-python
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
--
Ticket URL: <http://trac.macports.org/ticket/24859#comment:5>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list