[MacPorts] #25398: Errors install python25 on OSX 10.6 - xorg-util-macros dependecy fails
MacPorts
noreply at macports.org
Wed Jun 23 17:46:20 PDT 2010
#25398: Errors install python25 on OSX 10.6 - xorg-util-macros dependecy fails
-------------------------------+--------------------------------------------
Reporter: jskopek@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.9.1
Keywords: | Port:
-------------------------------+--------------------------------------------
Comment(by jskopek@…):
Apologies for the formatting issues in my initial message. I can't seem to
find a way to edit the first message, so here it is again with proper
formatting:
I seem to be unable to install python25 on a fresh installation of OSX
10.6. The installation seems to fail when installing the 'xorg-util-
macros' dependency:
{{{
Jean-Marc-Skopeks-MacBook:util-macros-1.9.0 jskopek$ sudo port clean
python25
---> Cleaning python25
Jean-Marc-Skopeks-MacBook:util-macros-1.9.0 jskopek$ sudo port install
python25
---> Computing dependencies for python25
---> Dependencies to be installed: tk Xft2 xrender xorg-libX11 xorg-util-
macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans
xorg-renderproto tcl xorg-libXScrnSaver xorg-libXext xorg-scrnsaverproto
---> Verifying checksum(s) for xorg-util-macros
Error: No checksum set for util-macros-1.9.0.tar.bz2
Error: Target org.macports.checksum returned: Unable to verify file
checksums
Log for xorg-util-macros is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-util-macros/main.log
Error: The following dependencies failed to build: tk Xft2 xrender xorg-
libX11 xorg-util-macros xorg-xcmiscproto xorg-xextproto xorg-
xf86bigfontproto xorg-xtrans xorg-renderproto tcl xorg-libXScrnSaver xorg-
libXext xorg-scrnsaverproto
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
When I attempt to install xorg-util-macros on it's own, I get the same
problem:
{{{
Jean-Marc-Skopeks-MacBook:~ jskopek$ sudo port clean --all xorg-util-
macros
---> Cleaning xorg-util-macros
Jean-Marc-Skopeks-MacBook:~ jskopek$ sudo port -d install xorg-util-macros
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
util-macros
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-util-macros/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
util-macros/work
DEBUG: Starting logging for xorg-util-macros
---> Computing dependencies for xorg-util-macros
DEBUG: Executing org.macports.main (xorg-util-macros)
---> Fetching xorg-util-macros
DEBUG: fetch phase started at Wed Jun 23 20:27:49 EDT 2010
DEBUG: Executing org.macports.fetch (xorg-util-macros)
---> util-macros-1.9.0.tar.bz2 doesn't seem to exist in
/opt/local/var/macports/distfiles/xorg-util-macros
DEBUG: Pinging xorg.freedesktop.org...
DEBUG: Pinging distfiles.macports.org...
DEBUG: Pinging aarnet.au.distfiles.macports.org...
DEBUG: Pinging lil.fr.distfiles.macports.org...
DEBUG: Pinging sea.us.distfiles.macports.org...
DEBUG: xorg.freedesktop.org ping time is 104.731
DEBUG: distfiles.macports.org ping time is 99.303
DEBUG: aarnet.au.distfiles.macports.org ping time is 255.070
DEBUG: lil.fr.distfiles.macports.org ping time is 136.923
DEBUG: sea.us.distfiles.macports.org ping time is 10000
---> Attempting to fetch util-macros-1.9.0.tar.bz2 from
http://distfiles.macports.org/xorg-util-macros
% Total % Received % Xferd Average Speed Time Time Time
Current
Dload Upload Total Spent Left
Speed
100 64246 100 64246 0 0 80536 0 --:--:-- --:--:-- --:--:--
98992
---> Verifying checksum(s) for xorg-util-macros
DEBUG: checksum phase started at Wed Jun 23 20:27:53 EDT 2010
DEBUG: Executing org.macports.checksum (xorg-util-macros)
---> Checksumming util-macros-1.9.0.tar.bz2
Error: No checksum set for util-macros-1.9.0.tar.bz2
Distfile checksum: util-macros-1.9.0.tar.bz2 md5
34b494f71f22534fe41ab23d56f16250
Distfile checksum: util-macros-1.9.0.tar.bz2 sha1
0fac28505b7f73a2dcb0058d945fcde083d5c786
Distfile checksum: util-macros-1.9.0.tar.bz2 rmd160
59721307a99e2bee918815b4297bd18ca0a8c91f
The correct checksum line may be:
checksums md5 34b494f71f22534fe41ab23d56f16250 \
sha1 0fac28505b7f73a2dcb0058d945fcde083d5c786 \
rmd160 59721307a99e2bee918815b4297bd18ca0a8c91f
Error: Target org.macports.checksum returned: Unable to verify file
checksums
DEBUG: Backtrace: Unable to verify file checksums
while executing
"$procedure $targetname"
Warning: the following items did not execute (for xorg-util-macros):
org.macports.activate org.macports.checksum org.macports.extract
org.macports.patch org.macports.configure org.macports.build
org.macports.destroot org.macports.install
Log for xorg-util-macros is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-util-macros/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
I've tried manually extracting and compiling the downloaded tar file, and
I get a 'nothing to be done for install-exec-am' problem:
{{{
Jean-Marc-Skopeks-MacBook:~ jskopek$ tar -xvf
/opt/local/var/macports/distfiles/xorg-util-macros/util-
macros-1.9.0.tar.bz2
x util-macros-1.9.0/
x util-macros-1.9.0/xorg-macros.pc.in
x util-macros-1.9.0/COPYING
x util-macros-1.9.0/aclocal.m4
x util-macros-1.9.0/Makefile.am
x util-macros-1.9.0/missing
x util-macros-1.9.0/xorgversion.m4
x util-macros-1.9.0/configure
x util-macros-1.9.0/xorg-macros.m4.in
x util-macros-1.9.0/configure.ac
x util-macros-1.9.0/Makefile.in
x util-macros-1.9.0/ChangeLog
x util-macros-1.9.0/README
x util-macros-1.9.0/install-sh
x util-macros-1.9.0/INSTALL
Jean-Marc-Skopeks-MacBook:util-macros-1.9.0 jskopek$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a BSD-compatible install... /usr/bin/install -c
configure: creating ./config.status
config.status: creating xorg-macros.pc
config.status: creating Makefile
config.status: creating xorg-macros.m4
Jean-Marc-Skopeks-MacBook:util-macros-1.9.0 jskopek$ sudo make
make: Nothing to be done for `all'.
Jean-Marc-Skopeks-MacBook:util-macros-1.9.0 jskopek$ sudo make install
make[1]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/share/aclocal" || ./install-sh -c -d
"/usr/local/share/aclocal"
/usr/bin/install -c -m 644 'xorg-macros.m4' '/usr/local/share/aclocal
/xorg-macros.m4'
test -z "/usr/local/share/util-macros" || ./install-sh -c -d
"/usr/local/share/util-macros"
/usr/bin/install -c -m 644 'INSTALL' '/usr/local/share/util-
macros/INSTALL'
test -z "/usr/local/share/pkgconfig" || ./install-sh -c -d
"/usr/local/share/pkgconfig"
/usr/bin/install -c -m 644 'xorg-macros.pc' '/usr/local/share/pkgconfig
/xorg-macros.pc'
make install-data-hook
rm -f /usr/local/share/aclocal/xorgversion.m4
}}}
I need Python 2.5 running for work, so any assistance whatsoever is
greatly appreciated!
--
Ticket URL: <http://trac.macports.org/ticket/25398#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list