[MacPorts] #25449: pypy won't compile
MacPorts
noreply at macports.org
Mon Jun 28 02:39:35 PDT 2010
#25449: pypy won't compile
------------------------------+---------------------------------------------
Reporter: brejoc@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.9.1
Keywords: | Port: pypy
------------------------------+---------------------------------------------
Hi!
I don't know what's the problem. Just copy&pasted the output. Hope that
helps.
Kind regards
Jochen Breuer
%% sudo port -d install pypy
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/pypy
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: Starting logging for pypy
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libffi 3.0.9_0 exists in the ports tree
DEBUG: libffi 3.0.9_0 is the latest installed
DEBUG: libffi 3.0.9_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! libffi 3.0.9_0 >= libffi 3.0.9_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python26 2.6.5_2 exists in the ports tree
DEBUG: python26 2.6.5_2 +darwin is the latest installed
DEBUG: python26 2.6.5_2 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port python26.
DEBUG: Skipping upgrade since python26 2.6.5_2 >= python26 2.6.5_2, even
though installed variants "+darwin" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_0 exists in the ports tree
DEBUG: gettext 0.18.1.1_0 is the latest installed
DEBUG: gettext 0.18.1.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants '+darwin_10' into variants
DEBUG: new fully merged portvariants: darwin_10 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin_10 is not provided by port ncurses.
DEBUG: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though
installed variants "+darwin_10" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants '+darwin_10' into variants
DEBUG: new fully merged portvariants: darwin_10 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin_10 is not provided by port ncursesw.
DEBUG: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
though installed variants "+darwin_10" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0 is the latest installed
DEBUG: zlib 1.2.5_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8o_0 exists in the ports tree
DEBUG: openssl 0.9.8o_0 +darwin is the latest installed
DEBUG: openssl 0.9.8o_0 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port openssl.
DEBUG: Skipping upgrade since openssl 0.9.8o_0 >= openssl 0.9.8o_0, even
though installed variants "+darwin" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tk 8.5.8_0 exists in the ports tree
DEBUG: tk 8.5.8_0 +darwin is the latest installed
DEBUG: tk 8.5.8_0 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port tk.
DEBUG: Skipping upgrade since tk 8.5.8_0 >= tk 8.5.8_0, even though
installed variants "+darwin" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tcl 8.5.8_0 exists in the ports tree
DEBUG: tcl 8.5.8_0 +darwin is the latest installed
DEBUG: tcl 8.5.8_0 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port tcl.
DEBUG: Skipping upgrade since tcl 8.5.8_0 >= tcl 8.5.8_0, even though
installed variants "+darwin" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.1.14_0 exists in the ports tree
DEBUG: Xft2 2.1.14_0 is the latest installed
DEBUG: Xft2 2.1.14_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.6_0 exists in the ports tree
DEBUG: xrender 0.9.6_0 is the latest installed
DEBUG: xrender 0.9.6_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3.4_0 exists in the ports tree
DEBUG: xorg-libX11 1.3.4_0 is the latest installed
DEBUG: xorg-libX11 1.3.4_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0 is the latest installed
DEBUG: xorg-libXau 1.0.5_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.17_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.17_0 is the latest installed
DEBUG: xorg-xproto 7.0.17_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.4_0 is the latest installed
DEBUG: xorg-kbproto 1.0.4_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11_0 is the latest installed
DEBUG: xorg-renderproto 0.11_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
renderproto
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
0.11_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.12_0 exists in the ports tree
DEBUG: freetype 2.3.12_0 +macosx is the latest installed
DEBUG: freetype 2.3.12_0 +macosx is active
DEBUG: Merging existing variants '+macosx' into variants
DEBUG: new fully merged portvariants: macosx +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant macosx is not provided by port freetype.
DEBUG: Skipping upgrade since freetype 2.3.12_0 >= freetype 2.3.12_0, even
though installed variants "+macosx" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.8.0_0 exists in the ports tree
DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
DEBUG: fontconfig 2.8.0_0 +macosx is active
DEBUG: Merging existing variants '+macosx' into variants
DEBUG: new fully merged portvariants: macosx +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant macosx is not provided by port fontconfig.
DEBUG: Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig 2.8.0_0,
even though installed variants "+macosx" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
DEBUG: xorg-libXScrnSaver 1.2.0_0 is the latest installed
DEBUG: xorg-libXScrnSaver 1.2.0_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXScrnSaver
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-
libXScrnSaver 1.2.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1.2_0 exists in the ports tree
DEBUG: xorg-libXext 1.1.2_0 is the latest installed
DEBUG: xorg-libXext 1.1.2_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0 is the latest installed
DEBUG: xorg-xextproto 7.1.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
7.1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-scrnsaverproto 1.2.0_0 is the latest installed
DEBUG: xorg-scrnsaverproto 1.2.0_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
scrnsaverproto
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-
scrnsaverproto 1.2.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.6.23.1_0 exists in the ports tree
DEBUG: sqlite3 3.6.23.1_0 is the latest installed
DEBUG: sqlite3 3.6.23.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! sqlite3 3.6.23.1_0 >= sqlite3 3.6.23.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.1.000_1 exists in the ports tree
DEBUG: readline 6.1.000_1 +darwin is the latest installed
DEBUG: readline 6.1.000_1 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port readline.
DEBUG: Skipping upgrade since readline 6.1.000_1 >= readline 6.1.000_1,
even though installed variants "+darwin" do not match "".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: db46 4.6.21_6 exists in the ports tree
DEBUG: db46 4.6.21_6 is the latest installed
DEBUG: db46 4.6.21_6 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gdbm 1.8.3_2 exists in the ports tree
DEBUG: gdbm 1.8.3_2 is the latest installed
DEBUG: gdbm 1.8.3_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin is active
DEBUG: Merging existing variants '+darwin' into variants
DEBUG: new fully merged portvariants: darwin +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port bzip2.
DEBUG: Skipping upgrade since bzip2 1.0.5_3 >= bzip2 1.0.5_3, even though
installed variants "+darwin" do not match "".
---> Computing dependencies for pypy
DEBUG: Searching for dependency: libffi
DEBUG: Found Dependency: receipt exists for libffi
DEBUG: Searching for dependency: python26
DEBUG: Found Dependency: receipt exists for python26
DEBUG: Executing org.macports.main (pypy)
DEBUG: Skipping completed org.macports.fetch (pypy)
DEBUG: Skipping completed org.macports.checksum (pypy)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (pypy)
DEBUG: Skipping completed org.macports.patch (pypy)
DEBUG: Skipping completed org.macports.configure (pypy)
---> Building pypy
DEBUG: build phase started at Mon Jun 28 11:33:36 CEST 2010
DEBUG: Executing org.macports.build (pypy)
DEBUG: Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/goal"
&& arch -x86_64 /opt/local/bin/python2.6 translate.py --batch
--cc=/usr/bin/gcc-4.2 --opt=3 --cflags="-arch x86_64 -I/opt/local/include
-L/opt/local/lib" targetpypystandalone.py'
[translation:info] Translating target as defined by targetpypystandalone
[platform:msg] Setting platform to 'host' cc=/usr/bin/gcc-4.2
[platform:execute] /usr/bin/gcc-4.2 -c -arch x86_64 -O3 -fomit-frame-
pointer -mmacosx-version-min=10.4 -mdynamic-no-pic
/tmp/usession-3/platcheck_6.c -o /tmp/usession-3/platcheck_6.o
[platform:execute] /usr/bin/gcc-4.2 -c -arch x86_64 -O3 -fomit-frame-
pointer -mmacosx-version-min=10.4 -mdynamic-no-pic
/tmp/usession-3/module_cache/module_0.c -o
/tmp/usession-3/module_cache/module_0.o
[platform:execute] /usr/bin/gcc-4.2 /tmp/usession-3/platcheck_6.o
/tmp/usession-3/module_cache/module_0.o -arch x86_64 -mmacosx-version-
min=10.4 -o /tmp/usession-3/platcheck_6
[translation] PyPy config object:
[translation] [objspace]
[translation] compiler = ast
[translation] nofaking = True
[translation] [opcodes]
[translation] CALL_LIKELY_BUILTIN = True
[translation] CALL_METHOD = True
[translation] [std]
[translation] builtinshortcut = True
[translation] getattributeshortcut = True
[translation] newshortcut = True
[translation] optimized_list_getitem = True
[translation] withinlineddict = True
[translation] withmethodcache = True
[translation] withprebuiltchar = True
[translation] withrangelist = True
[translation] withshadowtracking = False
[translation] withsharingdict = True
[translation] withtypeversion = True
[translation] [usemodules]
[translation] __pypy__ = True
[translation] _ast = True
[translation] _codecs = True
[translation] _lsprof = True
[translation] _minimal_curses = True
[translation] _pickle_support = True
[translation] _random = True
[translation] _rawffi = True
[translation] _socket = True
[translation] _sre = True
[translation] _ssl = True
[translation] _testing = True
[translation] _weakref = True
[translation] bz2 = True
[translation] cStringIO = True
[translation] crypt = True
[translation] errno = True
[translation] fcntl = True
[translation] gc = True
[translation] imp = True
[translation] itertools = True
[translation] marshal = True
[translation] math = True
[translation] md5 = True
[translation] mmap = True
[translation] operator = True
[translation] parser = True
[translation] posix = True
[translation] pyexpat = True
[translation] rctime = True
[translation] select = True
[translation] sha = True
[translation] signal = True
[translation] struct = True
[translation] symbol = True
[translation] termios = True
[translation] thread = True
[translation] time = True
[translation] token = True
[translation] unicodedata = True
[translation] zipimport = True
[translation] zlib = True
[platform:execute] /usr/bin/gcc-4.2 -c -arch x86_64 -O3 -fomit-frame-
pointer -mmacosx-version-min=10.4
-I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/c
/tmp/usession-3/module_cache/module_1.c -o
/tmp/usession-3/module_cache/module_1.o
[platform:execute] /usr/bin/gcc-4.2 -bundle -undefined dynamic_lookup
/tmp/usession-3/module_cache/module_1.o -arch x86_64 -mmacosx-version-
min=10.4
-I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/c
-o /tmp/usession-3/module_cache/externmod.so
[platform:execute] /usr/bin/gcc-4.2 -c -arch x86_64 -O3 -fomit-frame-
pointer -mmacosx-version-min=10.4
-I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/c
/tmp/usession-3/module_cache/module_2.c -o
/tmp/usession-3/module_cache/module_2.o
[platform:execute] /usr/bin/gcc-4.2 -bundle -undefined dynamic_lookup
/tmp/usession-3/module_cache/module_2.o -arch x86_64 -mmacosx-version-
min=10.4
-I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/c
-o /tmp/usession-3/module_cache/externmod_0.so
[translation:ERROR] Error:
[translation:ERROR] Traceback (most recent call last):
[translation:ERROR] File "translate.py", line 259, in main
[translation:ERROR] default_goal='compile')
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/driver.py",
line 763, in from_targetspec
[translation:ERROR] spec = target(driver, args)
[translation:ERROR] File "targetpypystandalone.py", line 223, in target
[translation:ERROR] return self.get_entry_point(config)
[translation:ERROR] File "targetpypystandalone.py", line 239, in
get_entry_point
[translation:ERROR] entry_point = create_entry_point(space, w_dict)
[translation:ERROR] File "targetpypystandalone.py", line 31, in
create_entry_point
[translation:ERROR] w_os = setup_nanos(space)
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/goal/nanos.py",
line 50, in setup_nanos
[translation:ERROR] w_os_path =
space.wrap(app_os_path.buildmodule(space, 'path'))
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/gateway.py",
line 855, in buildmodule
[translation:ERROR] return Module(space, space.wrap(name),
self.getwdict(space))
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/gateway.py",
line 851, in getwdict
[translation:ERROR] return
space.fromcache(ApplevelCache).getorbuild(self)
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/tool/cache.py",
line 51, in getorbuild
[translation:ERROR] result = self._build(key)
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/baseobjspace.py",
line 195, in _build
[translation:ERROR] return self.build(key)
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/gateway.py",
line 910, in build
[translation:ERROR] return PyPyCacheDir.build_applevelinterp_dict(app,
self.space)
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/gateway.py",
line 984, in build_applevelinterp_dict
[translation:ERROR] w_glob = initfunc(space)
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/_cache/nanos_2f2d826057fbc600b6c01042ed0d89cc.py",
line 658, in init__builtin__
[translation:ERROR] gbltin_getcwdu = space.getattr(mod_posix,
gs_getcwdu)
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/objspace/std/objspace.py",
line 671, in getattr
[translation:ERROR] raiseattrerror(self, w_obj, name)
[translation:ERROR] File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/objspace/descroperation.py",
line 29, in raiseattrerror
[translation:ERROR] typename, name)
[translation:ERROR] OpErrFmt: [<W_TypeObject(AttributeError)>: 'module'
object has no attribute 'getcwdu']
[translation] batch mode, not calling interactive helpers
Wrote
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_hashlib_cache.py.
Wrote
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_locale_cache.py.
Wrote
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_pyexpat_cache.py.
Wrote
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_resource_cache.py.
Wrote
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_syslog_cache.py.
shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/goal"
&& arch -x86_64 /opt/local/bin/python2.6 translate.py --batch
--cc=/usr/bin/gcc-4.2 --opt=3 --cflags="-arch x86_64 -I/opt/local/include
-L/opt/local/lib" targetpypystandalone.py " returned error 1
Error: Target org.macports.build returned: shell command failed
DEBUG: Backtrace: shell command failed
while executing
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for pypy):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Log for pypy is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
--
Ticket URL: <http://trac.macports.org/ticket/25449>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list