[MacPorts] #24012: kdelibs4-experimental 4.4.0_0 Error: Target org.macports.checksum returned: Unable to verify file checksums

Wed Mar 10 20:36:54 PST 2010

#24012: kdelibs4-experimental 4.4.0_0 Error: Target org.macports.checksum returned:
Unable to verify file checksums
------------------------------------+---------------------------------------
  Reporter:  maillists@…            |       Owner:  snc@…           
      Type:  defect                 |      Status:  closed          
  Priority:  Normal                 |   Milestone:                  
 Component:  ports                  |     Version:  1.8.2           
Resolution:  fixed                  |    Keywords:                  
      Port:  kdelibs4-experimental  |  
------------------------------------+---------------------------------------

Old description:

> Get the Unable to verify checksum errors, even if I remove the portfile,
> and it redownloads it.
>
> {{{
> here is the backtrace:
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4-experimental
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4-experimental
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port
> kdelibs4-experimental.
> DEBUG: Requested variant i386 is not provided by port
> kdelibs4-experimental.
> DEBUG: Requested variant macosx is not provided by port
> kdelibs4-experimental.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: qt4-mac 4.6.2_0 exists in the ports tree
> DEBUG: qt4-mac 4.6.2_0 +universal is the latest installed
> DEBUG: qt4-mac 4.6.2_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port qt4-mac.
> DEBUG: Requested variant i386 is not provided by port qt4-mac.
> DEBUG: Requested variant macosx is not provided by port qt4-mac.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pkgconfig 0.23_1 exists in the ports tree
> DEBUG: pkgconfig 0.23_1 +universal is the latest installed
> DEBUG: pkgconfig 0.23_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port pkgconfig.
> DEBUG: Requested variant i386 is not provided by port pkgconfig.
> DEBUG: Requested variant macosx is not provided by port pkgconfig.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: zlib 1.2.3_4 exists in the ports tree
> DEBUG: zlib 1.2.3_4 +universal is the latest installed
> DEBUG: zlib 1.2.3_4 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port zlib.
> DEBUG: Requested variant i386 is not provided by port zlib.
> DEBUG: Requested variant macosx is not provided by port zlib.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: dbus 1.2.16_1 exists in the ports tree
> DEBUG: dbus 1.2.16_1 +universal is the latest installed
> DEBUG: dbus 1.2.16_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port dbus.
> DEBUG: Requested variant i386 is not provided by port dbus.
> DEBUG: Requested variant macosx is not provided by port dbus.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: autoconf 2.65_1 exists in the ports tree
> DEBUG: autoconf 2.65_1  is the latest installed
> DEBUG: autoconf 2.65_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port autoconf.
> DEBUG: Requested variant i386 is not provided by port autoconf.
> DEBUG: Requested variant macosx is not provided by port autoconf.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5 5.8.9_0 exists in the ports tree
> DEBUG: perl5 5.8.9_0  is the latest installed
> DEBUG: perl5 5.8.9_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port perl5.
> DEBUG: Requested variant i386 is not provided by port perl5.
> DEBUG: Requested variant macosx is not provided by port perl5.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5.8 5.8.9_3 exists in the ports tree
> DEBUG: perl5.8 5.8.9_3 +universal is the latest installed
> DEBUG: perl5.8 5.8.9_3 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port perl5.8.
> DEBUG: Requested variant i386 is not provided by port perl5.8.
> DEBUG: Requested variant macosx is not provided by port perl5.8.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
> DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: m4 1.4.13_0 exists in the ports tree
> DEBUG: m4 1.4.13_0 +universal is the latest installed
> DEBUG: m4 1.4.13_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port m4.
> DEBUG: Requested variant i386 is not provided by port m4.
> DEBUG: Requested variant macosx is not provided by port m4.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: help2man 1.37.1_1 exists in the ports tree
> DEBUG: help2man 1.37.1_1 +universal is the latest installed
> DEBUG: help2man 1.37.1_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port help2man.
> DEBUG: Requested variant i386 is not provided by port help2man.
> DEBUG: Requested variant macosx is not provided by port help2man.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
> DEBUG: p5-locale-gettext 1.05_2  is the latest installed
> DEBUG: p5-locale-gettext 1.05_2  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port p5-locale-
> gettext.
> DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
> DEBUG: Requested variant macosx is not provided by port p5-locale-
> gettext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.17_4 exists in the ports tree
> DEBUG: gettext 0.17_4 +universal is the latest installed
> DEBUG: gettext 0.17_4 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gettext.
> DEBUG: Requested variant i386 is not provided by port gettext.
> DEBUG: Requested variant macosx is not provided by port gettext.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.13.1_0 exists in the ports tree
> DEBUG: libiconv 1.13.1_0 +universal is the latest installed
> DEBUG: libiconv 1.13.1_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libiconv.
> DEBUG: Requested variant i386 is not provided by port libiconv.
> DEBUG: Requested variant macosx is not provided by port libiconv.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gperf 3.0.4_0 exists in the ports tree
> DEBUG: gperf 3.0.4_0 +universal is the latest installed
> DEBUG: gperf 3.0.4_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gperf.
> DEBUG: Requested variant i386 is not provided by port gperf.
> DEBUG: Requested variant macosx is not provided by port gperf.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
> DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.7_0 exists in the ports tree
> DEBUG: ncurses 5.7_0 +darwin_10+universal is the latest installed
> DEBUG: ncurses 5.7_0 +darwin_10+universal is active
> DEBUG: Merging existing variants darwin_10 universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncurses.
> DEBUG: Requested variant i386 is not provided by port ncurses.
> DEBUG: Requested variant macosx is not provided by port ncurses.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant darwin_10 provides darwin_10
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncursesw 5.7_0 exists in the ports tree
> DEBUG: ncursesw 5.7_0 +darwin_10+universal is the latest installed
> DEBUG: ncursesw 5.7_0 +darwin_10+universal is active
> DEBUG: Merging existing variants darwin_10 universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncursesw.
> DEBUG: Requested variant i386 is not provided by port ncursesw.
> DEBUG: Requested variant macosx is not provided by port ncursesw.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant darwin_10 provides darwin_10
> DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_0 exists in the ports tree
> DEBUG: expat 2.0.1_0 +universal is the latest installed
> DEBUG: expat 2.0.1_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port expat.
> DEBUG: Requested variant i386 is not provided by port expat.
> DEBUG: Requested variant macosx is not provided by port expat.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
> DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
> 1.05_2
> DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
> DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: automake 1.11.1_0 exists in the ports tree
> DEBUG: automake 1.11.1_0 +universal is the latest installed
> DEBUG: automake 1.11.1_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port automake.
> DEBUG: Requested variant i386 is not provided by port automake.
> DEBUG: Requested variant macosx is not provided by port automake.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libtool 2.2.6b_1 exists in the ports tree
> DEBUG: libtool 2.2.6b_1 +darwin+universal is the latest installed
> DEBUG: libtool 2.2.6b_1 +darwin+universal is active
> DEBUG: Merging existing variants darwin universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant i386 is not provided by port libtool.
> DEBUG: Requested variant macosx is not provided by port libtool.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1
> DEBUG: No need to upgrade! dbus 1.2.16_1 >= dbus 1.2.16_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: epoch: in tree: 1 installed: 1
> DEBUG: openssl 0.9.8m_0 exists in the ports tree
> DEBUG: openssl 0.9.8m_0 +darwin+universal is the latest installed
> DEBUG: openssl 0.9.8m_0 +darwin+universal is active
> DEBUG: Merging existing variants darwin universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port openssl.
> DEBUG: Requested variant macosx is not provided by port openssl.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant darwin provides darwin
> DEBUG: No need to upgrade! openssl 0.9.8m_0 >= openssl 0.9.8m_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: sqlite3 3.6.22_0 exists in the ports tree
> DEBUG: sqlite3 3.6.22_0 +universal is the latest installed
> DEBUG: sqlite3 3.6.22_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port sqlite3.
> DEBUG: Requested variant i386 is not provided by port sqlite3.
> DEBUG: Requested variant macosx is not provided by port sqlite3.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: readline 6.1.000_1 exists in the ports tree
> DEBUG: readline 6.1.000_1 +darwin+universal is the latest installed
> DEBUG: readline 6.1.000_1 +darwin+universal is active
> DEBUG: Merging existing variants darwin universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port readline.
> DEBUG: Requested variant macosx is not provided by port readline.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant darwin provides darwin
> DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
> DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: tiff 3.9.2_2 exists in the ports tree
> DEBUG: tiff 3.9.2_2 +macosx+universal is the latest installed
> DEBUG: tiff 3.9.2_2 +macosx+universal is active
> DEBUG: Merging existing variants macosx universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port tiff.
> DEBUG: Requested variant i386 is not provided by port tiff.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: jpeg 7_0 exists in the ports tree
> DEBUG: jpeg 7_0 +universal is the latest installed
> DEBUG: jpeg 7_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port jpeg.
> DEBUG: Requested variant i386 is not provided by port jpeg.
> DEBUG: Requested variant macosx is not provided by port jpeg.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
> DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libpng 1.2.42_0 exists in the ports tree
> DEBUG: libpng 1.2.42_0 +universal is the latest installed
> DEBUG: libpng 1.2.42_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libpng.
> DEBUG: Requested variant i386 is not provided by port libpng.
> DEBUG: Requested variant macosx is not provided by port libpng.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libmng 1.0.10_1 exists in the ports tree
> DEBUG: libmng 1.0.10_1 +universal is the latest installed
> DEBUG: libmng 1.0.10_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libmng.
> DEBUG: Requested variant i386 is not provided by port libmng.
> DEBUG: Requested variant macosx is not provided by port libmng.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: lcms 1.19_1 exists in the ports tree
> DEBUG: lcms 1.19_1 +universal is the latest installed
> DEBUG: lcms 1.19_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port lcms.
> DEBUG: Requested variant i386 is not provided by port lcms.
> DEBUG: Requested variant macosx is not provided by port lcms.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! lcms 1.19_1 >= lcms 1.19_1
> DEBUG: No need to upgrade! libmng 1.0.10_1 >= libmng 1.0.10_1
> DEBUG: No need to upgrade! qt4-mac 4.6.2_0 >= qt4-mac 4.6.2_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: kdelibs4 4.4.1_0 exists in the ports tree
> DEBUG: kdelibs4 4.4.1_0 +docs+universal is the latest installed
> DEBUG: kdelibs4 4.4.1_0 +docs+universal is active
> DEBUG: Merging existing variants docs universal into variants
> DEBUG: new fully merged portvariants: universal + docs +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port kdelibs4.
> DEBUG: Requested variant i386 is not provided by port kdelibs4.
> DEBUG: Requested variant macosx is not provided by port kdelibs4.
> DEBUG: Executing variant docs provides docs
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: cmake 2.8.0_0 exists in the ports tree
> DEBUG: cmake 2.8.0_0 +universal is the latest installed
> DEBUG: cmake 2.8.0_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port cmake.
> DEBUG: Requested variant i386 is not provided by port cmake.
> DEBUG: Requested variant macosx is not provided by port cmake.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libidn 1.16_0 exists in the ports tree
> DEBUG: libidn 1.16_0 +universal is the latest installed
> DEBUG: libidn 1.16_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libidn.
> DEBUG: Requested variant i386 is not provided by port libidn.
> DEBUG: Requested variant macosx is not provided by port libidn.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! libidn 1.16_0 >= libidn 1.16_0
> DEBUG: No need to upgrade! cmake 2.8.0_0 >= cmake 2.8.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automoc
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: automoc 0.9.88_1 exists in the ports tree
> DEBUG: automoc 0.9.88_1 +docs+universal is the latest installed
> DEBUG: automoc 0.9.88_1 +docs+universal is active
> DEBUG: Merging existing variants docs universal into variants
> DEBUG: new fully merged portvariants: universal + docs +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automoc
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port automoc.
> DEBUG: Requested variant i386 is not provided by port automoc.
> DEBUG: Requested variant macosx is not provided by port automoc.
> DEBUG: Executing variant docs provides docs
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/doxygen
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: doxygen 1.6.2_0 exists in the ports tree
> DEBUG: doxygen 1.6.2_0 +darwin is the latest installed
> DEBUG: doxygen 1.6.2_0 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/doxygen
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant i386 is not provided by port doxygen.
> DEBUG: Requested variant macosx is not provided by port doxygen.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: flex 2.5.35_0 exists in the ports tree
> DEBUG: flex 2.5.35_0 +universal is the latest installed
> DEBUG: flex 2.5.35_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port flex.
> DEBUG: Requested variant i386 is not provided by port flex.
> DEBUG: Requested variant macosx is not provided by port flex.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: bison 2.4.1_0 exists in the ports tree
> DEBUG: bison 2.4.1_0 +universal is the latest installed
> DEBUG: bison 2.4.1_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port bison.
> DEBUG: Requested variant i386 is not provided by port bison.
> DEBUG: Requested variant macosx is not provided by port bison.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! bison 2.4.1_0 >= bison 2.4.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: coreutils 8.4_0 exists in the ports tree
> DEBUG: coreutils 8.4_0 +universal is the latest installed
> DEBUG: coreutils 8.4_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port coreutils.
> DEBUG: Requested variant i386 is not provided by port coreutils.
> DEBUG: Requested variant macosx is not provided by port coreutils.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gmp 5.0.1_0 exists in the ports tree
> DEBUG: gmp 5.0.1_0 +universal is the latest installed
> DEBUG: gmp 5.0.1_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gmp.
> DEBUG: Requested variant i386 is not provided by port gmp.
> DEBUG: Requested variant macosx is not provided by port gmp.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0
> DEBUG: No need to upgrade! coreutils 8.4_0 >= coreutils 8.4_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: graphviz 2.26.3_0 exists in the ports tree
> DEBUG: graphviz 2.26.3_0 +macosx+universal is the latest installed
> DEBUG: graphviz 2.26.3_0 +macosx+universal is active
> DEBUG: Merging existing variants macosx universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port graphviz.
> DEBUG: Requested variant i386 is not provided by port graphviz.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXaw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXaw 1.0.7_0 exists in the ports tree
> DEBUG: xorg-libXaw 1.0.7_0 +universal is the latest installed
> DEBUG: xorg-libXaw 1.0.7_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXaw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXaw.
> DEBUG: Requested variant i386 is not provided by port xorg-libXaw.
> DEBUG: Requested variant macosx is not provided by port xorg-libXaw.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: groff 1.20.1_1 exists in the ports tree
> DEBUG: groff 1.20.1_1 +universal is the latest installed
> DEBUG: groff 1.20.1_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port groff.
> DEBUG: Requested variant i386 is not provided by port groff.
> DEBUG: Requested variant macosx is not provided by port groff.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libsm
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
> DEBUG: xorg-libsm 1.1.1_0 +universal is the latest installed
> DEBUG: xorg-libsm 1.1.1_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libsm
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libsm.
> DEBUG: Requested variant i386 is not provided by port xorg-libsm.
> DEBUG: Requested variant macosx is not provided by port xorg-libsm.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xtrans
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
> DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
> DEBUG: xorg-xtrans 1.2.5_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xtrans
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
> DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
> DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
> DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libice
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
> DEBUG: xorg-libice 1.0.6_0 +universal is the latest installed
> DEBUG: xorg-libice 1.0.6_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libice
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libice.
> DEBUG: Requested variant i386 is not provided by port xorg-libice.
> DEBUG: Requested variant macosx is not provided by port xorg-libice.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
> DEBUG: xorg-xproto 7.0.16_0  is the latest installed
> DEBUG: xorg-xproto 7.0.16_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xproto.
> DEBUG: Requested variant i386 is not provided by port xorg-xproto.
> DEBUG: Requested variant macosx is not provided by port xorg-xproto.
> DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
> DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
> DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
> DEBUG: xorg-libXext 1.1.1_0 +universal is the latest installed
> DEBUG: xorg-libXext 1.1.1_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXext.
> DEBUG: Requested variant i386 is not provided by port xorg-libXext.
> DEBUG: Requested variant macosx is not provided by port xorg-libXext.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
> DEBUG: xorg-libX11 1.3.3_0 +universal is the latest installed
> DEBUG: xorg-libX11 1.3.3_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libX11.
> DEBUG: Requested variant i386 is not provided by port xorg-libX11.
> DEBUG: Requested variant macosx is not provided by port xorg-libX11.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-util-macros
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-util-macros 1.6.0_0 exists in the ports tree
> DEBUG: xorg-util-macros 1.6.0_0  is the latest installed
> DEBUG: xorg-util-macros 1.6.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-util-macros
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
> DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
> DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
> DEBUG: No need to upgrade! xorg-util-macros 1.6.0_0 >= xorg-util-macros
> 1.6.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-bigreqsproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
> DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
> DEBUG: xorg-bigreqsproto 1.1.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-bigreqsproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-
> bigreqsproto.
> DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
> DEBUG: Requested variant macosx is not provided by port xorg-
> bigreqsproto.
> DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
> 1.1.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xcmiscproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
> DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
> DEBUG: xorg-xcmiscproto 1.2.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xcmiscproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
> DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
> DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
> DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
> 1.2.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xextproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
> DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
> DEBUG: xorg-xextproto 7.1.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xextproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
> DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
> DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
> DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
> 7.1.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xf86bigfontproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
> DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
> DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xf86bigfontproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-
> xf86bigfontproto.
> DEBUG: Requested variant i386 is not provided by port xorg-
> xf86bigfontproto.
> DEBUG: Requested variant macosx is not provided by port xorg-
> xf86bigfontproto.
> DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
> xf86bigfontproto 1.2.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-inputproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
> DEBUG: xorg-inputproto 2.0_0  is the latest installed
> DEBUG: xorg-inputproto 2.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-inputproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
> DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
> DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
> DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXdmcp
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
> DEBUG: xorg-libXdmcp 1.0.3_0 +universal is the latest installed
> DEBUG: xorg-libXdmcp 1.0.3_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXdmcp
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
> DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
> DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXau
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
> DEBUG: xorg-libXau 1.0.5_0 +universal is the latest installed
> DEBUG: xorg-libXau 1.0.5_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXau
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXau.
> DEBUG: Requested variant i386 is not provided by port xorg-libXau.
> DEBUG: Requested variant macosx is not provided by port xorg-libXau.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-kbproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
> DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
> DEBUG: xorg-kbproto 1.0.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-kbproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
> DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
> DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
> DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
> DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
> DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXmu
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
> DEBUG: xorg-libXmu 1.0.5_0 +universal is the latest installed
> DEBUG: xorg-libXmu 1.0.5_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXmu
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
> DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
> DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
> DEBUG: xorg-libXt 1.0.7_1 +universal is the latest installed
> DEBUG: xorg-libXt 1.0.7_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXt
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXt.
> DEBUG: Requested variant i386 is not provided by port xorg-libXt.
> DEBUG: Requested variant macosx is not provided by port xorg-libXt.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
> DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xpm 3.5.8_0 exists in the ports tree
> DEBUG: xpm 3.5.8_0 +universal is the latest installed
> DEBUG: xpm 3.5.8_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xpm.
> DEBUG: Requested variant i386 is not provided by port xpm.
> DEBUG: Requested variant macosx is not provided by port xpm.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0
> DEBUG: No need to upgrade! xorg-libXaw 1.0.7_0 >= xorg-libXaw 1.0.7_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
> DEBUG: epoch: in tree: 1 installed: 1
> DEBUG: pango 1.24.5_0 exists in the ports tree
> DEBUG: pango 1.24.5_0 +macosx+universal is the latest installed
> DEBUG: pango 1.24.5_0 +macosx+universal is active
> DEBUG: Merging existing variants macosx universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port pango.
> DEBUG: Requested variant i386 is not provided by port pango.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: glib2 2.22.4_1 exists in the ports tree
> DEBUG: glib2 2.22.4_1 +darwin+universal is the latest installed
> DEBUG: glib2 2.22.4_1 +darwin+universal is active
> DEBUG: Merging existing variants darwin universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant i386 is not provided by port glib2.
> DEBUG: Requested variant macosx is not provided by port glib2.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
> DEBUG: python_select is *not* installed by MacPorts
> DEBUG: Searching for dependency: python_select
> DEBUG: Didn't find receipt, going to depspec regex for: python_select
> DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$
> DEBUG: python_select not installed, soft dependency satisfied
> DEBUG: No need to upgrade! glib2 2.22.4_1 >= glib2 2.22.4_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: Xft2 2.1.14_0 exists in the ports tree
> DEBUG: Xft2 2.1.14_0 +universal is the latest installed
> DEBUG: Xft2 2.1.14_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port Xft2.
> DEBUG: Requested variant i386 is not provided by port Xft2.
> DEBUG: Requested variant macosx is not provided by port Xft2.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xrender 0.9.5_0 exists in the ports tree
> DEBUG: xrender 0.9.5_0 +universal is the latest installed
> DEBUG: xrender 0.9.5_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xrender.
> DEBUG: Requested variant i386 is not provided by port xrender.
> DEBUG: Requested variant macosx is not provided by port xrender.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-renderproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
> DEBUG: xorg-renderproto 0.11_0  is the latest installed
> DEBUG: xorg-renderproto 0.11_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-renderproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
> DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
> DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
> DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
> 0.11_0
> DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: freetype 2.3.12_0 exists in the ports tree
> DEBUG: freetype 2.3.12_0 +macosx+universal is the latest installed
> DEBUG: freetype 2.3.12_0 +macosx+universal is active
> DEBUG: Merging existing variants macosx universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port freetype.
> DEBUG: Requested variant i386 is not provided by port freetype.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant macosx provides macosx
> DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: fontconfig 2.8.0_0 exists in the ports tree
> DEBUG: fontconfig 2.8.0_0 +macosx+universal is the latest installed
> DEBUG: fontconfig 2.8.0_0 +macosx+universal is active
> DEBUG: Merging existing variants macosx universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port fontconfig.
> DEBUG: Requested variant i386 is not provided by port fontconfig.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant macosx provides macosx
> DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
> DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: cairo 1.8.10_0 exists in the ports tree
> DEBUG: cairo 1.8.10_0 +macosx+universal is the latest installed
> DEBUG: cairo 1.8.10_0 +macosx+universal is active
> DEBUG: Merging existing variants macosx universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port cairo.
> DEBUG: Requested variant i386 is not provided by port cairo.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libpixman 0.16.6_0 exists in the ports tree
> DEBUG: libpixman 0.16.6_0 +universal is the latest installed
> DEBUG: libpixman 0.16.6_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libpixman.
> DEBUG: Requested variant i386 is not provided by port libpixman.
> DEBUG: Requested variant macosx is not provided by port libpixman.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! libpixman 0.16.6_0 >= libpixman 0.16.6_0
> DEBUG: No need to upgrade! cairo 1.8.10_0 >= cairo 1.8.10_0
> DEBUG: No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gd2 2.0.35_6 exists in the ports tree
> DEBUG: gd2 2.0.35_6 +universal is the latest installed
> DEBUG: gd2 2.0.35_6 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gd2.
> DEBUG: Requested variant i386 is not provided by port gd2.
> DEBUG: Requested variant macosx is not provided by port gd2.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! gd2 2.0.35_6 >= gd2 2.0.35_6
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ghostscript 8.71_1 exists in the ports tree
> DEBUG: ghostscript 8.71_1  is the latest installed
> DEBUG: ghostscript 8.71_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port ghostscript.
> DEBUG: Requested variant i386 is not provided by port ghostscript.
> DEBUG: Requested variant macosx is not provided by port ghostscript.
> DEBUG: No need to upgrade! ghostscript 8.71_1 >= ghostscript 8.71_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /urw-fonts
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: urw-fonts 1.0.7pre44_0 exists in the ports tree
> DEBUG: urw-fonts 1.0.7pre44_0  is the latest installed
> DEBUG: urw-fonts 1.0.7pre44_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/urw-
> fonts
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port urw-fonts.
> DEBUG: Requested variant i386 is not provided by port urw-fonts.
> DEBUG: Requested variant macosx is not provided by port urw-fonts.
> DEBUG: No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts
> 1.0.7pre44_0
> DEBUG: No need to upgrade! graphviz 2.26.3_0 >= graphviz 2.26.3_0
> DEBUG: No need to upgrade! doxygen 1.6.2_0 >= doxygen 1.6.2_0
> DEBUG: No need to upgrade! automoc 0.9.88_1 >= automoc 0.9.88_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gmake 3.81_0 exists in the ports tree
> DEBUG: gmake 3.81_0 +universal is the latest installed
> DEBUG: gmake 3.81_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port gmake.
> DEBUG: Requested variant i386 is not provided by port gmake.
> DEBUG: Requested variant macosx is not provided by port gmake.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: bzip2 1.0.5_3 exists in the ports tree
> DEBUG: bzip2 1.0.5_3 +darwin+universal is the latest installed
> DEBUG: bzip2 1.0.5_3 +darwin+universal is active
> DEBUG: Merging existing variants darwin universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port bzip2.
> DEBUG: Requested variant macosx is not provided by port bzip2.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/soprano
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: soprano 2.4.1_0 exists in the ports tree
> DEBUG: soprano 2.4.1_0 +docs+universal is the latest installed
> DEBUG: soprano 2.4.1_0 +docs+universal is active
> DEBUG: Merging existing variants docs universal into variants
> DEBUG: new fully merged portvariants: universal + docs +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/soprano
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port soprano.
> DEBUG: Requested variant i386 is not provided by port soprano.
> DEBUG: Requested variant macosx is not provided by port soprano.
> DEBUG: Executing variant docs provides docs
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/clucene
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: clucene 0.9.21b_0 exists in the ports tree
> DEBUG: clucene 0.9.21b_0 +universal is the latest installed
> DEBUG: clucene 0.9.21b_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/clucene
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port clucene.
> DEBUG: Requested variant i386 is not provided by port clucene.
> DEBUG: Requested variant macosx is not provided by port clucene.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! clucene 0.9.21b_0 >= clucene 0.9.21b_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/strigi
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: strigi 0.6.3_2 exists in the ports tree
> DEBUG: strigi 0.6.3_2 +universal is the latest installed
> DEBUG: strigi 0.6.3_2 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/strigi
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port strigi.
> DEBUG: Requested variant i386 is not provided by port strigi.
> DEBUG: Requested variant macosx is not provided by port strigi.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libxml2 2.7.6_0 exists in the ports tree
> DEBUG: libxml2 2.7.6_0 +universal is the latest installed
> DEBUG: libxml2 2.7.6_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libxml2.
> DEBUG: Requested variant i386 is not provided by port libxml2.
> DEBUG: Requested variant macosx is not provided by port libxml2.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0
> DEBUG: No need to upgrade! strigi 0.6.3_2 >= strigi 0.6.3_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/redland
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: redland 1.0.10_2 exists in the ports tree
> DEBUG: redland 1.0.10_2 +db46+universal is the latest installed
> DEBUG: redland 1.0.10_2 +db46+universal is active
> DEBUG: Merging existing variants db46 universal into variants
> DEBUG: new fully merged portvariants: db46 + universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/redland
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port redland.
> DEBUG: Requested variant i386 is not provided by port redland.
> DEBUG: Requested variant macosx is not provided by port redland.
> DEBUG: Executing variant db46 provides db46
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: curl 7.20.0_0 exists in the ports tree
> DEBUG: curl 7.20.0_0 +ssl+universal is the latest installed
> DEBUG: curl 7.20.0_0 +ssl+universal is active
> DEBUG: Merging existing variants ssl universal into variants
> DEBUG: new fully merged portvariants: universal + ssl +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port curl.
> DEBUG: Requested variant i386 is not provided by port curl.
> DEBUG: Requested variant macosx is not provided by port curl.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant ssl provides ssl
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net
> /curl-ca-bundle
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: curl-ca-bundle 7.20.0_0 exists in the ports tree
> DEBUG: curl-ca-bundle 7.20.0_0  is the latest installed
> DEBUG: curl-ca-bundle 7.20.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net
> /curl-ca-bundle
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port curl-ca-bundle.
> DEBUG: Requested variant i386 is not provided by port curl-ca-bundle.
> DEBUG: Requested variant macosx is not provided by port curl-ca-bundle.
> DEBUG: No need to upgrade! curl-ca-bundle 7.20.0_0 >= curl-ca-bundle
> 7.20.0_0
> DEBUG: No need to upgrade! curl 7.20.0_0 >= curl 7.20.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libxslt 1.1.26_0 exists in the ports tree
> DEBUG: libxslt 1.1.26_0 +universal is the latest installed
> DEBUG: libxslt 1.1.26_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libxslt.
> DEBUG: Requested variant i386 is not provided by port libxslt.
> DEBUG: Requested variant macosx is not provided by port libxslt.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree
> DEBUG: mpfr 2.4.2-p1_0 +universal is the latest installed
> DEBUG: mpfr 2.4.2-p1_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port mpfr.
> DEBUG: Requested variant i386 is not provided by port mpfr.
> DEBUG: Requested variant macosx is not provided by port mpfr.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/raptor
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: raptor 1.4.21_0 exists in the ports tree
> DEBUG: raptor 1.4.21_0 +universal is the latest installed
> DEBUG: raptor 1.4.21_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/raptor
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port raptor.
> DEBUG: Requested variant i386 is not provided by port raptor.
> DEBUG: Requested variant macosx is not provided by port raptor.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! raptor 1.4.21_0 >= raptor 1.4.21_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/rasqal
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: rasqal 0.9.19_0 exists in the ports tree
> DEBUG: rasqal 0.9.19_0 +universal is the latest installed
> DEBUG: rasqal 0.9.19_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/rasqal
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port rasqal.
> DEBUG: Requested variant i386 is not provided by port rasqal.
> DEBUG: Requested variant macosx is not provided by port rasqal.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! rasqal 0.9.19_0 >= rasqal 0.9.19_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: db46 4.6.21_6 exists in the ports tree
> DEBUG: db46 4.6.21_6 +universal is the latest installed
> DEBUG: db46 4.6.21_6 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port db46.
> DEBUG: Requested variant i386 is not provided by port db46.
> DEBUG: Requested variant macosx is not provided by port db46.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
> DEBUG: No need to upgrade! redland 1.0.10_2 >= redland 1.0.10_2
> DEBUG: No need to upgrade! soprano 2.4.1_0 >= soprano 2.4.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/security
> /cyrus-sasl2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: cyrus-sasl2 2.1.23_1 exists in the ports tree
> DEBUG: cyrus-sasl2 2.1.23_1 +kerberos+universal is the latest installed
> DEBUG: cyrus-sasl2 2.1.23_1 +kerberos+universal is active
> DEBUG: Merging existing variants kerberos universal into variants
> DEBUG: new fully merged portvariants: universal + kerberos +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/security
> /cyrus-sasl2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port cyrus-sasl2.
> DEBUG: Requested variant i386 is not provided by port cyrus-sasl2.
> DEBUG: Requested variant macosx is not provided by port cyrus-sasl2.
> DEBUG: Executing variant universal provides universal
> DEBUG: Executing variant kerberos provides kerberos
> DEBUG: No need to upgrade! cyrus-sasl2 2.1.23_1 >= cyrus-sasl2 2.1.23_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pcre 7.9_0 exists in the ports tree
> DEBUG: pcre 7.9_0 +universal is the latest installed
> DEBUG: pcre 7.9_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port pcre.
> DEBUG: Requested variant i386 is not provided by port pcre.
> DEBUG: Requested variant macosx is not provided by port pcre.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /shared-mime-info
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: shared-mime-info 0.71_0 exists in the ports tree
> DEBUG: shared-mime-info 0.71_0 +universal is the latest installed
> DEBUG: shared-mime-info 0.71_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /shared-mime-info
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port shared-mime-info.
> DEBUG: Requested variant i386 is not provided by port shared-mime-info.
> DEBUG: Requested variant macosx is not provided by port shared-mime-info.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -xml-parser
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-xml-parser 2.36_0 exists in the ports tree
> DEBUG: p5-xml-parser 2.36_0  is the latest installed
> DEBUG: p5-xml-parser 2.36_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -xml-parser
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port p5-xml-parser.
> DEBUG: Requested variant i386 is not provided by port p5-xml-parser.
> DEBUG: Requested variant macosx is not provided by port p5-xml-parser.
> DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: intltool 0.40.6_0 exists in the ports tree
> DEBUG: intltool 0.40.6_0  is the latest installed
> DEBUG: intltool 0.40.6_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port intltool.
> DEBUG: Requested variant i386 is not provided by port intltool.
> DEBUG: Requested variant macosx is not provided by port intltool.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /gnome-common
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gnome-common 2.26.0_0 exists in the ports tree
> DEBUG: gnome-common 2.26.0_0  is the latest installed
> DEBUG: gnome-common 2.26.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /gnome-common
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port gnome-common.
> DEBUG: Requested variant i386 is not provided by port gnome-common.
> DEBUG: Requested variant macosx is not provided by port gnome-common.
> DEBUG: No need to upgrade! gnome-common 2.26.0_0 >= gnome-common 2.26.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -getopt-long
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-getopt-long 2.38_0 exists in the ports tree
> DEBUG: p5-getopt-long 2.38_0  is the latest installed
> DEBUG: p5-getopt-long 2.38_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -getopt-long
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port p5-getopt-long.
> DEBUG: Requested variant i386 is not provided by port p5-getopt-long.
> DEBUG: Requested variant macosx is not provided by port p5-getopt-long.
> DEBUG: No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long 2.38_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-pathtools 3.31_0 exists in the ports tree
> DEBUG: p5-pathtools 3.31_0  is the latest installed
> DEBUG: p5-pathtools 3.31_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port p5-pathtools.
> DEBUG: Requested variant i386 is not provided by port p5-pathtools.
> DEBUG: Requested variant macosx is not provided by port p5-pathtools.
> DEBUG: No need to upgrade! p5-pathtools 3.31_0 >= p5-pathtools 3.31_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -scalar-list-utils
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-scalar-list-utils 1.22_0 exists in the ports tree
> DEBUG: p5-scalar-list-utils 1.22_0  is the latest installed
> DEBUG: p5-scalar-list-utils 1.22_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -scalar-list-utils
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port p5-scalar-list-
> utils.
> DEBUG: Requested variant i386 is not provided by port p5-scalar-list-
> utils.
> DEBUG: Requested variant macosx is not provided by port p5-scalar-list-
> utils.
> DEBUG: No need to upgrade! p5-scalar-list-utils 1.22_0 >= p5-scalar-list-
> utils 1.22_0
> DEBUG: No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0
> DEBUG: No need to upgrade! shared-mime-info 0.71_0 >= shared-mime-info
> 0.71_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: giflib 4.1.6_1 exists in the ports tree
> DEBUG: giflib 4.1.6_1 +universal is the latest installed
> DEBUG: giflib 4.1.6_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port giflib.
> DEBUG: Requested variant i386 is not provided by port giflib.
> DEBUG: Requested variant macosx is not provided by port giflib.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! giflib 4.1.6_1 >= giflib 4.1.6_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: jasper 1.900.1_6 exists in the ports tree
> DEBUG: jasper 1.900.1_6 +universal is the latest installed
> DEBUG: jasper 1.900.1_6 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port jasper.
> DEBUG: Requested variant i386 is not provided by port jasper.
> DEBUG: Requested variant macosx is not provided by port jasper.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip
> DEBUG: unzip is *not* installed by MacPorts
> DEBUG: Searching for dependency: unzip
> DEBUG: Didn't find receipt, going to depspec regex for: unzip
> DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
> DEBUG: unzip not installed, soft dependency satisfied
> DEBUG: No need to upgrade! jasper 1.900.1_6 >= jasper 1.900.1_6
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: openexr 1.6.1_1 exists in the ports tree
> DEBUG: openexr 1.6.1_1 +universal is the latest installed
> DEBUG: openexr 1.6.1_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port openexr.
> DEBUG: Requested variant i386 is not provided by port openexr.
> DEBUG: Requested variant macosx is not provided by port openexr.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ilmbase 1.0.1_2 exists in the ports tree
> DEBUG: ilmbase 1.0.1_2 +universal is the latest installed
> DEBUG: ilmbase 1.0.1_2 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port ilmbase.
> DEBUG: Requested variant i386 is not provided by port ilmbase.
> DEBUG: Requested variant macosx is not provided by port ilmbase.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gsed 4.2.1_0 exists in the ports tree
> DEBUG: gsed 4.2.1_0 +universal is the latest installed
> DEBUG: gsed 4.2.1_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gsed.
> DEBUG: Requested variant i386 is not provided by port gsed.
> DEBUG: Requested variant macosx is not provided by port gsed.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
> DEBUG: No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
> DEBUG: No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree
> DEBUG: libart_lgpl 2.3.20_0 +universal is the latest installed
> DEBUG: libart_lgpl 2.3.20_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libart_lgpl.
> DEBUG: Requested variant i386 is not provided by port libart_lgpl.
> DEBUG: Requested variant macosx is not provided by port libart_lgpl.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/enchant
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: enchant 1.5.0_1 exists in the ports tree
> DEBUG: enchant 1.5.0_1 +universal is the latest installed
> DEBUG: enchant 1.5.0_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/enchant
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port enchant.
> DEBUG: Requested variant i386 is not provided by port enchant.
> DEBUG: Requested variant macosx is not provided by port enchant.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: aspell 0.60.6_2 exists in the ports tree
> DEBUG: aspell 0.60.6_2 +macosx+universal is the latest installed
> DEBUG: aspell 0.60.6_2 +macosx+universal is active
> DEBUG: Merging existing variants macosx universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port aspell.
> DEBUG: Requested variant i386 is not provided by port aspell.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: texinfo 4.13_0 exists in the ports tree
> DEBUG: texinfo 4.13_0 +universal is the latest installed
> DEBUG: texinfo 4.13_0 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port texinfo.
> DEBUG: Requested variant i386 is not provided by port texinfo.
> DEBUG: Requested variant macosx is not provided by port texinfo.
> DEBUG: Executing variant universal provides universal
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: lzmautils 4.32.7_1 exists in the ports tree
> DEBUG: lzmautils 4.32.7_1 +universal is the latest installed
> DEBUG: lzmautils 4.32.7_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port lzmautils.
> DEBUG: Requested variant i386 is not provided by port lzmautils.
> DEBUG: Requested variant macosx is not provided by port lzmautils.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1
> DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0
> DEBUG: No need to upgrade! aspell 0.60.6_2 >= aspell 0.60.6_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/hunspell
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: hunspell 1.2.8_1 exists in the ports tree
> DEBUG: hunspell 1.2.8_1 +universal is the latest installed
> DEBUG: hunspell 1.2.8_1 +universal is active
> DEBUG: Merging existing variants universal into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/hunspell
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port hunspell.
> DEBUG: Requested variant i386 is not provided by port hunspell.
> DEBUG: Requested variant macosx is not provided by port hunspell.
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! hunspell 1.2.8_1 >= hunspell 1.2.8_1
> DEBUG: No need to upgrade! enchant 1.5.0_1 >= enchant 1.5.0_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /aspell-dict-en
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: aspell-dict-en 6.0_0 exists in the ports tree
> DEBUG: aspell-dict-en 6.0_0  is the latest installed
> DEBUG: aspell-dict-en 6.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /aspell-dict-en
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port aspell-dict-en.
> DEBUG: Requested variant i386 is not provided by port aspell-dict-en.
> DEBUG: Requested variant macosx is not provided by port aspell-dict-en.
> DEBUG: No need to upgrade! aspell-dict-en 6.0_0 >= aspell-dict-en 6.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/attica
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: attica 0.1.2_0 exists in the ports tree
> DEBUG: attica 0.1.2_0 +docs+universal is the latest installed
> DEBUG: attica 0.1.2_0 +docs+universal is active
> DEBUG: Merging existing variants docs universal into variants
> DEBUG: new fully merged portvariants: universal + docs +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/attica
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.2.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port attica.
> DEBUG: Requested variant i386 is not provided by port attica.
> DEBUG: Requested variant macosx is not provided by port attica.
> DEBUG: Executing variant docs provides docs
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! attica 0.1.2_0 >= attica 0.1.2_0
> DEBUG: No need to upgrade! kdelibs4 4.4.1_0 >= kdelibs4 4.4.1_0
> --->  Computing dependencies for kdelibs4-experimental
> DEBUG: Searching for dependency: qt4-mac
> DEBUG: Found Dependency: receipt exists for qt4-mac
> DEBUG: Searching for dependency: kdelibs4
> DEBUG: Found Dependency: receipt exists for kdelibs4
> DEBUG: Searching for dependency: cmake
> DEBUG: Found Dependency: receipt exists for cmake
> DEBUG: Searching for dependency: automoc
> DEBUG: Found Dependency: receipt exists for automoc
> DEBUG: Executing org.macports.main (kdelibs4-experimental)
> DEBUG: Attempting ln -sf
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdelibs4-experimental/work
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4-experimental/work
> --->  Fetching kdelibs4-experimental
> DEBUG: Executing org.macports.fetch (kdelibs4-experimental)
> --->  Verifying checksum(s) for kdelibs4-experimental
> DEBUG: Executing org.macports.checksum (kdelibs4-experimental)
> --->  Checksumming kdelibs-experimental-4.4.0.tar.bz2
> Error: Checksum (md5) mismatch for kdelibs-experimental-4.4.0.tar.bz2
> Portfile checksum: kdelibs-experimental-4.4.0.tar.bz2 md5
> 5b6bf1e49f2e18ffcd844392928ad30e
> Distfile checksum: kdelibs-experimental-4.4.0.tar.bz2 md5
> 31fac25a746d2f9d318c5a37c938423e
> Error: Checksum (sha1) mismatch for kdelibs-experimental-4.4.0.tar.bz2
> Portfile checksum: kdelibs-experimental-4.4.0.tar.bz2 sha1
> 05936c4d3e0df7f135e9a1a4f430c2e9555d9b6e
> Distfile checksum: kdelibs-experimental-4.4.0.tar.bz2 sha1
> a9a77d8dba9bf7b564af6d06d6dd98de993f505a
> Error: Checksum (rmd160) mismatch for kdelibs-experimental-4.4.0.tar.bz2
> Portfile checksum: kdelibs-experimental-4.4.0.tar.bz2 rmd160
> 91cc4574fd48d96ee14e7197f71768dacc2f8909
> Distfile checksum: kdelibs-experimental-4.4.0.tar.bz2 rmd160
> 9405166b0d27727818aa34c293473611959b5819
> The correct checksum line may be:
> checksums           md5     31fac25a746d2f9d318c5a37c938423e \
>                     sha1    a9a77d8dba9bf7b564af6d06d6dd98de993f505a \
>                     rmd160  9405166b0d27727818aa34c293473611959b5819
> Error: Target org.macports.checksum returned: Unable to verify file
> checksums
> DEBUG: Backtrace: Unable to verify file checksums
>     while executing
> "$procedure $targetname"
> Warning: the following items did not execute (for kdelibs4-experimental):
> org.macports.activate org.macports.extract org.macports.checksum
> org.macports.patch org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
> }}}

New description:

 Get the Unable to verify checksum errors, even if I remove the portfile,
 and it redownloads it.

 [attachment:kdelibs-experimental.txt.bz2 here] is the backtrace

--

Comment(by ryandesign@…):

 I converted the enormous inline debug output into an [attachment:kdelibs-
 experimental.txt.bz2 attachment].

-- 
Ticket URL: <http://trac.macports.org/ticket/24012#comment:3>
MacPorts <http://www.macports.org/>
Ports system for Mac OS