[MacPorts] #24032: gnuradio 3.2.2+python25 install failure
MacPorts
noreply at macports.org
Fri Mar 12 12:14:49 PST 2010
#24032: gnuradio 3.2.2+python25 install failure
---------------------------------------+------------------------------------
Reporter: jeremy.holleman@… | Owner: michaelld@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: | Port: gnuradio
---------------------------------------+------------------------------------
Changes (by macsforever2000@…):
* cc: michaelld@… (removed)
* keywords: gnuradio wxgui =>
Old description:
> Intel MacBook Pro running OS X 10.5.8[[BR]]
> XCode version 3.1.2[[BR]]
> MacPorts 1.8.2[[BR]]
>
> ----
>
> When attempting to install the python2.5 variant of gnuradio, the
> installation aborts with an error. It seems to be failing in the
> configure phase of gnuradio-wxgui. If I attempt to install gnuradio-
> wxgui+python25 directly, the result looks similar. Some components,
> including gnuradio-core, are installed, and I am able to run the
> dialtone.py example.
>
> I had initially tried to install the default python26 variant, but ran
> into problems related to libusb, and switched to the python25 version
> based on the information in ticket 18104. I attempted to uninstall all
> of the python26 variants, but it is possible that I missed some.
>
> One line near the end says that USRP2 is only supported on linux, but
> presumably, but I cannot tell whether that is actually the source of the
> problem.
>
> I've pasted an edited version of the end of the output of the install
> command below. I can provide the complete output (with -d flag) if it
> would be helpful.
>
> Thanks,
> Jeremy
>
> ----
>
> {{{
> ### My added comments are marked with this ### at the beginning of the
> line
> ### Command line: "sudo port -d install gnuradio +python25 >&
> gr_install_dump.txt"
> ### many lines omitted
> DEBUG: Requested variant darwin is not provided by port gnuradio-wxgui.
> DEBUG: Requested variant i386 is not provided by port gnuradio-wxgui.
> DEBUG: Requested variant macosx is not provided by port gnuradio-wxgui.
> DEBUG: Executing variant python25 provides python25
> ### skipping some lines ...
> ---> Configuring gnuradio-wxgui
> DEBUG: Using compiler 'Mac OS X gcc 4.0'
> DEBUG: Executing org.macports.configure (gnuradio-wxgui)
> DEBUG: Environment: CFLAGS='-O2 -arch i386'
> CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch i386'
> MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2
> -m32' LDFLAGS='-L/opt/local/lib' FCFLAGS='-O2 -m32'
> OBJC='/usr/bin/gcc-4.0' INSTALL='/usr/bin/install -c'
> PYTHON='/opt/local/bin/python2.5' OBJCFLAGS='-O2 -arch i386'
> FFLAGS='-O2 -m32' CC='/usr/bin/gcc-4.0'
> DEBUG: Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.
> org_release_ports_science_gnuradio-wxgui/work/gnuradio-3.2.2"
> && ./configure --prefix=/opt/local --disable-all-components
> --with-omnithread --with-gruel --with-gnuradio-core --enable-gr-wxgui
> --disable-doxygen --disable-docs'
> checking build system type... i386-apple-darwin9.8.0
> ### lots of "checking <something>" lines omitted
> Not building component gcell
> ### Also Not building component pmt, mblock, usrp
> checking whether host_os is linux*... no
> ### This next line seems suspicious.
> configure: USRP2 currently requires Linux host OS, not found
> Not building component usrp2.
> ### Also not building gr-usrp, gr-usrp2, gr-gcell, gr-audio-alsa,
> gr-audio-jack, gr-audio-oss, gr-audio-osx, gr-audio-portaudio,
> gr-audio-windows, gr-cvsd-vocoder, gr-gpio, gr-gsm-fr-vocoder,
> gr-pager, gr-radar-mono, gr-radio-astronomy, gr-trellis,
> gr-video-sdl
> checking for Python wxWidgets wrappers >= 2.8... no
> checking for Numeric Python extensions... yes
> configure: error: Component gr-wxgui has errors; stopping.
> Error: Target org.macports.configure returned: configure failure:
> shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_science_gnuradio-wxgui/work/gnuradio-3.2.2"
> && ./configure --prefix=/opt/local --disable-all-components
> --with-omnithread --with-gruel --with-gnuradio-core --enable-gr-wxgui
> --disable-doxygen --disable-docs " returned error 1
> DEBUG: Backtrace: configure failure: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_science_gnuradio-wxgui/work/gnuradio-3.2.2"
> && ./configure --prefix=/opt/local --disable-all-components
> --with-omnithread --with-gruel --with-gnuradio-core --enable-gr-wxgui
> --disable-doxygen --disable-docs " returned error 1
> while executing
> "$procedure $targetname"
> Warning: the following items did not execute (for gnuradio-wxgui):
> org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> Error: The following dependencies failed to build: gnuradio-grc
> gnuradio-wxgui gnuradio-gsm-fr-vocoder gnuradio-pager
> gnuradio-radar-mono gnuradio-radio-astronomy gnuradio-sounder
> gnuradio-trellis gnuradio-usrp gnuradio-utils gnuradio-video-sdl
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
>
> }}}
>
> ----
New description:
Intel MacBook Pro running OS X 10.5.8[[BR]]
XCode version 3.1.2[[BR]]
MacPorts 1.8.2[[BR]]
----
When attempting to install the python2.5 variant of gnuradio, the
installation aborts with an error. It seems to be failing in the
configure phase of gnuradio-wxgui. If I attempt to install gnuradio-
wxgui+python25 directly, the result looks similar. Some components,
including gnuradio-core, are installed, and I am able to run the
dialtone.py example.
I had initially tried to install the default python26 variant, but ran
into problems related to libusb, and switched to the python25 version
based on the information in ticket #18104. I attempted to uninstall all
of the python26 variants, but it is possible that I missed some.
One line near the end says that USRP2 is only supported on linux, but
presumably, but I cannot tell whether that is actually the source of the
problem.
I've pasted an edited version of the end of the output of the install
command below. I can provide the complete output (with -d flag) if it
would be helpful.
Thanks,
Jeremy
----
{{{
### My added comments are marked with this ### at the beginning of the
line
### Command line: "sudo port -d install gnuradio +python25 >&
gr_install_dump.txt"
### many lines omitted
DEBUG: Requested variant darwin is not provided by port gnuradio-wxgui.
DEBUG: Requested variant i386 is not provided by port gnuradio-wxgui.
DEBUG: Requested variant macosx is not provided by port gnuradio-wxgui.
DEBUG: Executing variant python25 provides python25
### skipping some lines ...
---> Configuring gnuradio-wxgui
DEBUG: Using compiler 'Mac OS X gcc 4.0'
DEBUG: Executing org.macports.configure (gnuradio-wxgui)
DEBUG: Environment: CFLAGS='-O2 -arch i386'
CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch i386'
MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2
-m32' LDFLAGS='-L/opt/local/lib' FCFLAGS='-O2 -m32'
OBJC='/usr/bin/gcc-4.0' INSTALL='/usr/bin/install -c'
PYTHON='/opt/local/bin/python2.5' OBJCFLAGS='-O2 -arch i386'
FFLAGS='-O2 -m32' CC='/usr/bin/gcc-4.0'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.
org_release_ports_science_gnuradio-wxgui/work/gnuradio-3.2.2"
&& ./configure --prefix=/opt/local --disable-all-components
--with-omnithread --with-gruel --with-gnuradio-core --enable-gr-wxgui
--disable-doxygen --disable-docs'
checking build system type... i386-apple-darwin9.8.0
### lots of "checking <something>" lines omitted
Not building component gcell
### Also Not building component pmt, mblock, usrp
checking whether host_os is linux*... no
### This next line seems suspicious.
configure: USRP2 currently requires Linux host OS, not found
Not building component usrp2.
### Also not building gr-usrp, gr-usrp2, gr-gcell, gr-audio-alsa,
gr-audio-jack, gr-audio-oss, gr-audio-osx, gr-audio-portaudio,
gr-audio-windows, gr-cvsd-vocoder, gr-gpio, gr-gsm-fr-vocoder,
gr-pager, gr-radar-mono, gr-radio-astronomy, gr-trellis,
gr-video-sdl
checking for Python wxWidgets wrappers >= 2.8... no
checking for Numeric Python extensions... yes
configure: error: Component gr-wxgui has errors; stopping.
Error: Target org.macports.configure returned: configure failure:
shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_science_gnuradio-wxgui/work/gnuradio-3.2.2"
&& ./configure --prefix=/opt/local --disable-all-components
--with-omnithread --with-gruel --with-gnuradio-core --enable-gr-wxgui
--disable-doxygen --disable-docs " returned error 1
DEBUG: Backtrace: configure failure: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_science_gnuradio-wxgui/work/gnuradio-3.2.2"
&& ./configure --prefix=/opt/local --disable-all-components
--with-omnithread --with-gruel --with-gnuradio-core --enable-gr-wxgui
--disable-doxygen --disable-docs " returned error 1
while executing
"$procedure $targetname"
Warning: the following items did not execute (for gnuradio-wxgui):
org.macports.activate org.macports.configure org.macports.build
org.macports.destroot org.macports.install
Error: The following dependencies failed to build: gnuradio-grc
gnuradio-wxgui gnuradio-gsm-fr-vocoder gnuradio-pager
gnuradio-radar-mono gnuradio-radio-astronomy gnuradio-sounder
gnuradio-trellis gnuradio-usrp gnuradio-utils gnuradio-video-sdl
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
----
--
--
Ticket URL: <http://trac.macports.org/ticket/24032#comment:4>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list