[MacPorts] #24091: g95 fails to install
MacPorts
noreply at macports.org
Wed Mar 17 07:04:14 PDT 2010
#24091: g95 fails to install
-----------------------------------+----------------------------------------
Reporter: ryan.manger@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: | Port:
-----------------------------------+----------------------------------------
Computer: MBPro OS X 10.4.11
Tried installing g95, but received an error about dependencies. I began to
install the individual dependencies, but ran into a problem with help2man.
Any suggestions/solutions will be greatly appreciated.
Thank you,
Ryan
Here is what happens when I try installing g95:
{{{
dyn21924543:~ Ryan$ sudo port -d install g95
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/g95
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/g95
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port g95.
DEBUG: Requested variant i386 is not provided by port g95.
DEBUG: Requested variant macosx is not provided by port g95.
DEBUG: Executing variant darwin_8 provides darwin_8
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
---> Computing dependencies for g95
DEBUG: Searching for dependency: libtool
DEBUG: Didn't find receipt, going to depspec regex for: libtool
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Executing variant darwin provides darwin
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: odcctools
DEBUG: Didn't find receipt, going to depspec regex for: odcctools
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/odcctools
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/odcctools
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port odcctools.
DEBUG: Requested variant i386 is not provided by port odcctools.
DEBUG: Requested variant macosx is not provided by port odcctools.
DEBUG: Searching for dependency: automake
DEBUG: Didn't find receipt, going to depspec regex for: automake
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: autoconf
DEBUG: Didn't find receipt, going to depspec regex for: autoconf
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: m4
DEBUG: Found Dependency: receipt exists for m4
DEBUG: Searching for dependency: help2man
DEBUG: Didn't find receipt, going to depspec regex for: help2man
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: p5-locale-gettext
DEBUG: Found Dependency: receipt exists for p5-locale-gettext
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: subversion
DEBUG: Found Dependency: receipt exists for subversion
DEBUG: Executing org.macports.main (help2man)
DEBUG: Skipping completed org.macports.fetch (help2man)
DEBUG: Skipping completed org.macports.checksum (help2man)
DEBUG: Skipping completed org.macports.extract (help2man)
DEBUG: Skipping completed org.macports.patch (help2man)
DEBUG: Skipping completed org.macports.configure (help2man)
---> Building help2man
DEBUG: Executing org.macports.build (help2man)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.4'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_help2man/work/help2man-1.37.1"
&& /usr/bin/make -j2 all'
/usr/bin/gcc-4.0 -o bindtextdomain.so -fPIC -bundle -L/opt/local/lib
bindtextdomain.c -lintl
bindtextdomain.c: In function 'setup':
bindtextdomain.c:42: error: 'RTLD_NEXT' undeclared (first use in this
function)
bindtextdomain.c:42: error: (Each undeclared identifier is reported only
once
bindtextdomain.c:42: error: for each function it appears in.)
make: *** [bindtextdomain.so] Error 1
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_help2man/work/help2man-1.37.1"
&& /usr/bin/make -j2 all " returned error 2
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_help2man/work/help2man-1.37.1"
&& /usr/bin/make -j2 all " returned error 2
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for help2man):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: The following dependencies failed to build: libtool automake
autoconf help2man odcctools
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
--
Ticket URL: <http://trac.macports.org/ticket/24091>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list