[MacPorts] #24114: octave-odepkg 0.6.7 - installation failure

[MacPorts]

#24114: octave-odepkg 0.6.7 - installation failure
--------------------------+-------------------------------------------------
 Reporter:  akt@…         |       Owner:  macports-tickets@…                   
     Type:  defect        |      Status:  new                                  
 Priority:  Normal        |   Milestone:                                       
Component:  ports         |     Version:  1.8.2                                
 Keywords:                |        Port:  octave-odepkg                        
--------------------------+-------------------------------------------------
Changes (by macsforever2000@…):

  * keywords:  octave-odepkg =>
  * port:  => octave-odepkg


Old description:

> I have recently installed Octave 3.2.3 onto my Mac (MacBook Pro, OSX
> 10.5.8) using Macports (Version: 1.8.2) successfully and am trying to
> install the octave-odepkg 0.6.7 package using Macports. While octave has
> been installed successfully I get error messages when I try to install
> octave-odepkg:
>
> {{{
> error: couldn't read directory /Users/akt/octave: No such file or
> directory
> error: called from:
> error:   /Users/akt/macports/share/octave/3.2.3/m/pkg/pkg.m at line 426,
> column 7
> error:   /Users/akt/macports/share/octave/3.2.3/m/pkg/pkg.m at line 380,
> column 17
> Error: Target org.macports.activate returned: shell command "octave
> --eval "pkg rebuild"" returned error 1
> DEBUG: Backtrace: shell command "octave --eval "pkg rebuild"" returned
> error 1
>     while executing
> "$post $targetname"
> Warning: the following items did not execute (for octave-odepkg):
> org.macports.activate
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
> }}}
>

> I installed octave with the command:
> "port install octave" and octave-odepkg with the command "port install
> octave-odepkg". I am using an non-admin install of Macports. The full log
> output (which is also attached) from the octave-odepkg, obtained with the
> -d flag is as follows:
>
> {{{
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math
> /octave-odepkg
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math
> /octave-odepkg
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port octave-odepkg.
> DEBUG: Requested variant i386 is not provided by port octave-odepkg.
> DEBUG: Requested variant macosx is not provided by port octave-odepkg.
> MacPorts running without privileges. You may be unable to complete
> certain actions (eg install).
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/octave
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: octave 3.2.3_2 exists in the ports tree
> DEBUG: octave 3.2.3_2 +gcc43 is the latest installed
> DEBUG: octave 3.2.3_2 +gcc43 is active
> DEBUG: Merging existing variants gcc43 into variants
> DEBUG: new fully merged portvariants: gcc43 +
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/octave
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port octave.
> DEBUG: Requested variant i386 is not provided by port octave.
> DEBUG: Requested variant macosx is not provided by port octave.
> DEBUG: Executing variant gcc43 provides gcc43
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gawk 3.1.7_0 exists in the ports tree
> DEBUG: gawk 3.1.7_0  is the latest installed
> DEBUG: gawk 3.1.7_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port gawk.
> DEBUG: Requested variant i386 is not provided by port gawk.
> DEBUG: Requested variant macosx is not provided by port gawk.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.13.1_0 exists in the ports tree
> DEBUG: libiconv 1.13.1_0  is the latest installed
> DEBUG: libiconv 1.13.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libiconv.
> DEBUG: Requested variant i386 is not provided by port libiconv.
> DEBUG: Requested variant macosx is not provided by port libiconv.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gperf 3.0.4_0 exists in the ports tree
> DEBUG: gperf 3.0.4_0  is the latest installed
> DEBUG: gperf 3.0.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gperf.
> DEBUG: Requested variant i386 is not provided by port gperf.
> DEBUG: Requested variant macosx is not provided by port gperf.
> DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
> DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.17_4 exists in the ports tree
> DEBUG: gettext 0.17_4  is the latest installed
> DEBUG: gettext 0.17_4  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gettext.
> DEBUG: Requested variant i386 is not provided by port gettext.
> DEBUG: Requested variant macosx is not provided by port gettext.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.7_0 exists in the ports tree
> DEBUG: ncurses 5.7_0  is the latest installed
> DEBUG: ncurses 5.7_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncurses.
> DEBUG: Requested variant i386 is not provided by port ncurses.
> DEBUG: Requested variant macosx is not provided by port ncurses.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncursesw 5.7_0 exists in the ports tree
> DEBUG: ncursesw 5.7_0  is the latest installed
> DEBUG: ncursesw 5.7_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncursesw.
> DEBUG: Requested variant i386 is not provided by port ncursesw.
> DEBUG: Requested variant macosx is not provided by port ncursesw.
> DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_0 exists in the ports tree
> DEBUG: expat 2.0.1_0  is the latest installed
> DEBUG: expat 2.0.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port expat.
> DEBUG: Requested variant i386 is not provided by port expat.
> DEBUG: Requested variant macosx is not provided by port expat.
> DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
> DEBUG: No need to upgrade! gawk 3.1.7_0 >= gawk 3.1.7_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gsed 4.2.1_0 exists in the ports tree
> DEBUG: gsed 4.2.1_0  is the latest installed
> DEBUG: gsed 4.2.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gsed.
> DEBUG: Requested variant i386 is not provided by port gsed.
> DEBUG: Requested variant macosx is not provided by port gsed.
> DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5 5.8.9_0 exists in the ports tree
> DEBUG: perl5 5.8.9_0  is the latest installed
> DEBUG: perl5 5.8.9_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port perl5.
> DEBUG: Requested variant i386 is not provided by port perl5.
> DEBUG: Requested variant macosx is not provided by port perl5.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5.8 5.8.9_3 exists in the ports tree
> DEBUG: perl5.8 5.8.9_3  is the latest installed
> DEBUG: perl5.8 5.8.9_3  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port perl5.8.
> DEBUG: Requested variant i386 is not provided by port perl5.8.
> DEBUG: Requested variant macosx is not provided by port perl5.8.
> DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
> DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: texinfo 4.13_0 exists in the ports tree
> DEBUG: texinfo 4.13_0  is the latest installed
> DEBUG: texinfo 4.13_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port texinfo.
> DEBUG: Requested variant i386 is not provided by port texinfo.
> DEBUG: Requested variant macosx is not provided by port texinfo.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: lzmautils 4.32.7_1 exists in the ports tree
> DEBUG: lzmautils 4.32.7_1  is the latest installed
> DEBUG: lzmautils 4.32.7_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port lzmautils.
> DEBUG: Requested variant i386 is not provided by port lzmautils.
> DEBUG: Requested variant macosx is not provided by port lzmautils.
> DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1
> DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gcc43 4.3.4_0 exists in the ports tree
> DEBUG: gcc43 4.3.4_0  is the latest installed
> DEBUG: gcc43 4.3.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port gcc43.
> DEBUG: Requested variant i386 is not provided by port gcc43.
> DEBUG: Requested variant macosx is not provided by port gcc43.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gmp 4.3.2_0 exists in the ports tree
> DEBUG: gmp 4.3.2_0  is the latest installed
> DEBUG: gmp 4.3.2_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gmp.
> DEBUG: Requested variant i386 is not provided by port gmp.
> DEBUG: Requested variant macosx is not provided by port gmp.
> DEBUG: No need to upgrade! gmp 4.3.2_0 >= gmp 4.3.2_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree
> DEBUG: mpfr 2.4.2-p1_0  is the latest installed
> DEBUG: mpfr 2.4.2-p1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port mpfr.
> DEBUG: Requested variant i386 is not provided by port mpfr.
> DEBUG: Requested variant macosx is not provided by port mpfr.
> DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0
> DEBUG: No need to upgrade! gcc43 4.3.4_0 >= gcc43 4.3.4_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/arpack
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: arpack 1_3 exists in the ports tree
> DEBUG: arpack 1_3 +gcc43 is the latest installed
> DEBUG: arpack 1_3 +gcc43 is active
> DEBUG: Merging existing variants gcc43 into variants
> DEBUG: new fully merged portvariants: gcc43 +
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/arpack
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: not using configure, so not adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port arpack.
> DEBUG: Requested variant i386 is not provided by port arpack.
> DEBUG: Requested variant macosx is not provided by port arpack.
> DEBUG: Executing variant gcc43 provides gcc43
> DEBUG: No need to upgrade! arpack 1_3 >= arpack 1_3
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/atlas
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: atlas 3.8.3_1 exists in the ports tree
> DEBUG: atlas 3.8.3_1  is the latest installed
> DEBUG: atlas 3.8.3_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/atlas
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port atlas.
> DEBUG: Requested variant i386 is not provided by port atlas.
> DEBUG: Requested variant macosx is not provided by port atlas.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: bzip2 1.0.5_3 exists in the ports tree
> DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
> DEBUG: bzip2 1.0.5_3 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port bzip2.
> DEBUG: Requested variant macosx is not provided by port bzip2.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gzip 1.4_0 exists in the ports tree
> DEBUG: gzip 1.4_0  is the latest installed
> DEBUG: gzip 1.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port gzip.
> DEBUG: Requested variant i386 is not provided by port gzip.
> DEBUG: Requested variant macosx is not provided by port gzip.
> DEBUG: No need to upgrade! gzip 1.4_0 >= gzip 1.4_0
> DEBUG: No need to upgrade! atlas 3.8.3_1 >= atlas 3.8.3_1
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/net/curl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: curl 7.19.7_1 exists in the ports tree
> DEBUG: curl 7.19.7_1 +ssl is the latest installed
> DEBUG: curl 7.19.7_1 +ssl is active
> DEBUG: Merging existing variants ssl into variants
> DEBUG: new fully merged portvariants: ssl +
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/net/curl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port curl.
> DEBUG: Requested variant i386 is not provided by port curl.
> DEBUG: Requested variant macosx is not provided by port curl.
> DEBUG: Executing variant ssl provides ssl
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pkgconfig 0.23_1 exists in the ports tree
> DEBUG: pkgconfig 0.23_1  is the latest installed
> DEBUG: pkgconfig 0.23_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port pkgconfig.
> DEBUG: Requested variant i386 is not provided by port pkgconfig.
> DEBUG: Requested variant macosx is not provided by port pkgconfig.
> DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: zlib 1.2.3_4 exists in the ports tree
> DEBUG: zlib 1.2.3_4  is the latest installed
> DEBUG: zlib 1.2.3_4  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port zlib.
> DEBUG: Requested variant i386 is not provided by port zlib.
> DEBUG: Requested variant macosx is not provided by port zlib.
> DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: epoch: in tree: 1 installed: 1
> DEBUG: openssl 0.9.8l_0 exists in the ports tree
> DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
> DEBUG: openssl 0.9.8l_0 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port openssl.
> DEBUG: Requested variant macosx is not provided by port openssl.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/net
> /curl-ca-bundle
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: curl-ca-bundle 7.19.7_1 exists in the ports tree
> DEBUG: curl-ca-bundle 7.19.7_1  is the latest installed
> DEBUG: curl-ca-bundle 7.19.7_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/net
> /curl-ca-bundle
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port curl-ca-bundle.
> DEBUG: Requested variant i386 is not provided by port curl-ca-bundle.
> DEBUG: Requested variant macosx is not provided by port curl-ca-bundle.
> DEBUG: No need to upgrade! curl-ca-bundle 7.19.7_1 >= curl-ca-bundle
> 7.19.7_1
> DEBUG: No need to upgrade! curl 7.19.7_1 >= curl 7.19.7_1
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: fftw-3 3.2.2_0 exists in the ports tree
> DEBUG: fftw-3 3.2.2_0 +i386 is the latest installed
> DEBUG: fftw-3 3.2.2_0 +i386 is active
> DEBUG: Merging existing variants i386 into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port fftw-3.
> DEBUG: Requested variant macosx is not provided by port fftw-3.
> DEBUG: Executing variant i386 provides i386
> DEBUG: No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3-single
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: fftw-3-single 3.2.2_0 exists in the ports tree
> DEBUG: fftw-3-single 3.2.2_0 +i386 is the latest installed
> DEBUG: fftw-3-single 3.2.2_0 +i386 is active
> DEBUG: Merging existing variants i386 into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3-single
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port fftw-3-single.
> DEBUG: Requested variant macosx is not provided by port fftw-3-single.
> DEBUG: Executing variant i386 provides i386
> DEBUG: No need to upgrade! fftw-3-single 3.2.2_0 >= fftw-3-single 3.2.2_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/ftgl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ftgl 2.1.3-rc5_0 exists in the ports tree
> DEBUG: ftgl 2.1.3-rc5_0  is the latest installed
> DEBUG: ftgl 2.1.3-rc5_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/ftgl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port ftgl.
> DEBUG: Requested variant i386 is not provided by port ftgl.
> DEBUG: Requested variant macosx is not provided by port ftgl.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/doxygen
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: doxygen 1.6.2_0 exists in the ports tree
> DEBUG: doxygen 1.6.2_0 +darwin is the latest installed
> DEBUG: doxygen 1.6.2_0 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/doxygen
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant i386 is not provided by port doxygen.
> DEBUG: Requested variant macosx is not provided by port doxygen.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/flex
> DEBUG: flex is *not* installed by MacPorts
> DEBUG: Searching for dependency: flex
> DEBUG: Didn't find receipt, going to depspec regex for: flex
> DEBUG: Found Dependency: path: /usr/bin filename: flex regex: ^flex$
> DEBUG: flex not installed, soft dependency satisfied
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/bison
> DEBUG: bison is *not* installed by MacPorts
> DEBUG: Searching for dependency: bison
> DEBUG: Didn't find receipt, going to depspec regex for: bison
> DEBUG: Found Dependency: path: /usr/bin filename: bison regex: ^bison$
> DEBUG: bison not installed, soft dependency satisfied
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: coreutils 8.4_0 exists in the ports tree
> DEBUG: coreutils 8.4_0  is the latest installed
> DEBUG: coreutils 8.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port coreutils.
> DEBUG: Requested variant i386 is not provided by port coreutils.
> DEBUG: Requested variant macosx is not provided by port coreutils.
> DEBUG: No need to upgrade! coreutils 8.4_0 >= coreutils 8.4_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libpng 1.2.42_0 exists in the ports tree
> DEBUG: libpng 1.2.42_0  is the latest installed
> DEBUG: libpng 1.2.42_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libpng.
> DEBUG: Requested variant i386 is not provided by port libpng.
> DEBUG: Requested variant macosx is not provided by port libpng.
> DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: graphviz 2.26.3_0 exists in the ports tree
> DEBUG: graphviz 2.26.3_0 +macosx is the latest installed
> DEBUG: graphviz 2.26.3_0 +macosx is active
> DEBUG: Merging existing variants macosx into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port graphviz.
> DEBUG: Requested variant i386 is not provided by port graphviz.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXaw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXaw 1.0.7_0 exists in the ports tree
> DEBUG: xorg-libXaw 1.0.7_0  is the latest installed
> DEBUG: xorg-libXaw 1.0.7_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXaw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXaw.
> DEBUG: Requested variant i386 is not provided by port xorg-libXaw.
> DEBUG: Requested variant macosx is not provided by port xorg-libXaw.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libsm
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
> DEBUG: xorg-libsm 1.1.1_0  is the latest installed
> DEBUG: xorg-libsm 1.1.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libsm
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libsm.
> DEBUG: Requested variant i386 is not provided by port xorg-libsm.
> DEBUG: Requested variant macosx is not provided by port xorg-libsm.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xtrans
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
> DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
> DEBUG: xorg-xtrans 1.2.5_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xtrans
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
> DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
> DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
> DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libice
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
> DEBUG: xorg-libice 1.0.6_0  is the latest installed
> DEBUG: xorg-libice 1.0.6_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libice
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libice.
> DEBUG: Requested variant i386 is not provided by port xorg-libice.
> DEBUG: Requested variant macosx is not provided by port xorg-libice.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
> DEBUG: xorg-xproto 7.0.16_0  is the latest installed
> DEBUG: xorg-xproto 7.0.16_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xproto.
> DEBUG: Requested variant i386 is not provided by port xorg-xproto.
> DEBUG: Requested variant macosx is not provided by port xorg-xproto.
> DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
> DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
> DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
> DEBUG: xorg-libXext 1.1.1_0  is the latest installed
> DEBUG: xorg-libXext 1.1.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXext.
> DEBUG: Requested variant i386 is not provided by port xorg-libXext.
> DEBUG: Requested variant macosx is not provided by port xorg-libXext.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
> DEBUG: xorg-libX11 1.3.3_0  is the latest installed
> DEBUG: xorg-libX11 1.3.3_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libX11.
> DEBUG: Requested variant i386 is not provided by port xorg-libX11.
> DEBUG: Requested variant macosx is not provided by port xorg-libX11.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-util-macros
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-util-macros 1.5.0_0 exists in the ports tree
> DEBUG: xorg-util-macros 1.5.0_0  is the latest installed
> DEBUG: xorg-util-macros 1.5.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-util-macros
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
> DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
> DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
> DEBUG: No need to upgrade! xorg-util-macros 1.5.0_0 >= xorg-util-macros
> 1.5.0_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-bigreqsproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
> DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
> DEBUG: xorg-bigreqsproto 1.1.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-bigreqsproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-
> bigreqsproto.
> DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
> DEBUG: Requested variant macosx is not provided by port xorg-
> bigreqsproto.
> DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
> 1.1.0_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xcmiscproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
> DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
> DEBUG: xorg-xcmiscproto 1.2.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xcmiscproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
> DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
> DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
> DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
> 1.2.0_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xextproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
> DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
> DEBUG: xorg-xextproto 7.1.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xextproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
> DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
> DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
> DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
> 7.1.1_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xf86bigfontproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
> DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
> DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xf86bigfontproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-
> xf86bigfontproto.
> DEBUG: Requested variant i386 is not provided by port xorg-
> xf86bigfontproto.
> DEBUG: Requested variant macosx is not provided by port xorg-
> xf86bigfontproto.
> DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
> xf86bigfontproto 1.2.0_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-inputproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
> DEBUG: xorg-inputproto 2.0_0  is the latest installed
> DEBUG: xorg-inputproto 2.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-inputproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
> DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
> DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
> DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXdmcp
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
> DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
> DEBUG: xorg-libXdmcp 1.0.3_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXdmcp
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
> DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
> DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
> DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXau
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
> DEBUG: xorg-libXau 1.0.5_0  is the latest installed
> DEBUG: xorg-libXau 1.0.5_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXau
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXau.
> DEBUG: Requested variant i386 is not provided by port xorg-libXau.
> DEBUG: Requested variant macosx is not provided by port xorg-libXau.
> DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-kbproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
> DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
> DEBUG: xorg-kbproto 1.0.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-kbproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
> DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
> DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
> DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
> DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
> DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXmu
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
> DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
> DEBUG: xorg-libXmu 1.0.5_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXmu
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
> DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
> DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
> DEBUG: xorg-libXt 1.0.7_1  is the latest installed
> DEBUG: xorg-libXt 1.0.7_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXt
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXt.
> DEBUG: Requested variant i386 is not provided by port xorg-libXt.
> DEBUG: Requested variant macosx is not provided by port xorg-libXt.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: autoconf 2.65_1 exists in the ports tree
> DEBUG: autoconf 2.65_1  is the latest installed
> DEBUG: autoconf 2.65_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port autoconf.
> DEBUG: Requested variant i386 is not provided by port autoconf.
> DEBUG: Requested variant macosx is not provided by port autoconf.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: m4 1.4.13_0 exists in the ports tree
> DEBUG: m4 1.4.13_0  is the latest installed
> DEBUG: m4 1.4.13_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port m4.
> DEBUG: Requested variant i386 is not provided by port m4.
> DEBUG: Requested variant macosx is not provided by port m4.
> DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: help2man 1.37.1_1 exists in the ports tree
> DEBUG: help2man 1.37.1_1  is the latest installed
> DEBUG: help2man 1.37.1_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port help2man.
> DEBUG: Requested variant i386 is not provided by port help2man.
> DEBUG: Requested variant macosx is not provided by port help2man.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
> DEBUG: p5-locale-gettext 1.05_2  is the latest installed
> DEBUG: p5-locale-gettext 1.05_2  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port p5-locale-
> gettext.
> DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
> DEBUG: Requested variant macosx is not provided by port p5-locale-
> gettext.
> DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
> 1.05_2
> DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
> DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: automake 1.11.1_0 exists in the ports tree
> DEBUG: automake 1.11.1_0  is the latest installed
> DEBUG: automake 1.11.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port automake.
> DEBUG: Requested variant i386 is not provided by port automake.
> DEBUG: Requested variant macosx is not provided by port automake.
> DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libtool 2.2.6b_0 exists in the ports tree
> DEBUG: libtool 2.2.6b_0  is the latest installed
> DEBUG: libtool 2.2.6b_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libtool.
> DEBUG: Requested variant i386 is not provided by port libtool.
> DEBUG: Requested variant macosx is not provided by port libtool.
> DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
> DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
> DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xpm 3.5.8_0 exists in the ports tree
> DEBUG: xpm 3.5.8_0  is the latest installed
> DEBUG: xpm 3.5.8_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xpm.
> DEBUG: Requested variant i386 is not provided by port xpm.
> DEBUG: Requested variant macosx is not provided by port xpm.
> DEBUG: No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0
> DEBUG: No need to upgrade! xorg-libXaw 1.0.7_0 >= xorg-libXaw 1.0.7_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11/pango
> DEBUG: epoch: in tree: 1 installed: 1
> DEBUG: pango 1.24.5_0 exists in the ports tree
> DEBUG: pango 1.24.5_0 +macosx is the latest installed
> DEBUG: pango 1.24.5_0 +macosx is active
> DEBUG: Merging existing variants macosx into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11/pango
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port pango.
> DEBUG: Requested variant i386 is not provided by port pango.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: glib2 2.22.4_0 exists in the ports tree
> DEBUG: glib2 2.22.4_0 +darwin is the latest installed
> DEBUG: glib2 2.22.4_0 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant i386 is not provided by port glib2.
> DEBUG: Requested variant macosx is not provided by port glib2.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
> DEBUG: python_select is *not* installed by MacPorts
> DEBUG: Searching for dependency: python_select
> DEBUG: Didn't find receipt, going to depspec regex for: python_select
> DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$
> DEBUG: python_select not installed, soft dependency satisfied
> DEBUG: No need to upgrade! glib2 2.22.4_0 >= glib2 2.22.4_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: Xft2 2.1.14_0 exists in the ports tree
> DEBUG: Xft2 2.1.14_0  is the latest installed
> DEBUG: Xft2 2.1.14_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port Xft2.
> DEBUG: Requested variant i386 is not provided by port Xft2.
> DEBUG: Requested variant macosx is not provided by port Xft2.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xrender 0.9.5_0 exists in the ports tree
> DEBUG: xrender 0.9.5_0  is the latest installed
> DEBUG: xrender 0.9.5_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xrender.
> DEBUG: Requested variant i386 is not provided by port xrender.
> DEBUG: Requested variant macosx is not provided by port xrender.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-renderproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
> DEBUG: xorg-renderproto 0.11_0  is the latest installed
> DEBUG: xorg-renderproto 0.11_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-renderproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
> DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
> DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
> DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
> 0.11_0
> DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/print/freetype
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: freetype 2.3.11_1 exists in the ports tree
> DEBUG: freetype 2.3.11_1 +macosx is the latest installed
> DEBUG: freetype 2.3.11_1 +macosx is active
> DEBUG: Merging existing variants macosx into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/print/freetype
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port freetype.
> DEBUG: Requested variant i386 is not provided by port freetype.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: fontconfig 2.8.0_0 exists in the ports tree
> DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
> DEBUG: fontconfig 2.8.0_0 +macosx is active
> DEBUG: Merging existing variants macosx into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port fontconfig.
> DEBUG: Requested variant i386 is not provided by port fontconfig.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
> DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: cairo 1.8.8_0 exists in the ports tree
> DEBUG: cairo 1.8.8_0 +macosx is the latest installed
> DEBUG: cairo 1.8.8_0 +macosx is active
> DEBUG: Merging existing variants macosx into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port cairo.
> DEBUG: Requested variant i386 is not provided by port cairo.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libpixman 0.16.4_0 exists in the ports tree
> DEBUG: libpixman 0.16.4_0  is the latest installed
> DEBUG: libpixman 0.16.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libpixman.
> DEBUG: Requested variant i386 is not provided by port libpixman.
> DEBUG: Requested variant macosx is not provided by port libpixman.
> DEBUG: No need to upgrade! libpixman 0.16.4_0 >= libpixman 0.16.4_0
> DEBUG: No need to upgrade! cairo 1.8.8_0 >= cairo 1.8.8_0
> DEBUG: No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: jpeg 7_0 exists in the ports tree
> DEBUG: jpeg 7_0  is the latest installed
> DEBUG: jpeg 7_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port jpeg.
> DEBUG: Requested variant i386 is not provided by port jpeg.
> DEBUG: Requested variant macosx is not provided by port jpeg.
> DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gd2 2.0.35_6 exists in the ports tree
> DEBUG: gd2 2.0.35_6  is the latest installed
> DEBUG: gd2 2.0.35_6  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gd2.
> DEBUG: Requested variant i386 is not provided by port gd2.
> DEBUG: Requested variant macosx is not provided by port gd2.
> DEBUG: No need to upgrade! gd2 2.0.35_6 >= gd2 2.0.35_6
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ghostscript 8.70_1 exists in the ports tree
> DEBUG: ghostscript 8.70_1  is the latest installed
> DEBUG: ghostscript 8.70_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port ghostscript.
> DEBUG: Requested variant i386 is not provided by port ghostscript.
> DEBUG: Requested variant macosx is not provided by port ghostscript.
> DEBUG: No need to upgrade! ghostscript 8.70_1 >= ghostscript 8.70_1
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /urw-fonts
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: urw-fonts 1.0.7pre44_0 exists in the ports tree
> DEBUG: urw-fonts 1.0.7pre44_0  is the latest installed
> DEBUG: urw-fonts 1.0.7pre44_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/x11
> /urw-fonts
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port urw-fonts.
> DEBUG: Requested variant i386 is not provided by port urw-fonts.
> DEBUG: Requested variant macosx is not provided by port urw-fonts.
> DEBUG: No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts
> 1.0.7pre44_0
> DEBUG: No need to upgrade! graphviz 2.26.3_0 >= graphviz 2.26.3_0
> DEBUG: No need to upgrade! doxygen 1.6.2_0 >= doxygen 1.6.2_0
> DEBUG: No need to upgrade! ftgl 2.1.3-rc5_0 >= ftgl 2.1.3-rc5_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/glpk
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: glpk 4.41_0 exists in the ports tree
> DEBUG: glpk 4.41_0  is the latest installed
> DEBUG: glpk 4.41_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/glpk
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port glpk.
> DEBUG: Requested variant i386 is not provided by port glpk.
> DEBUG: Requested variant macosx is not provided by port glpk.
> DEBUG: No need to upgrade! glpk 4.41_0 >= glpk 4.41_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/GraphicsMagick
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: GraphicsMagick 1.3.8_0 exists in the ports tree
> DEBUG: GraphicsMagick 1.3.8_0 +q8 is the latest installed
> DEBUG: GraphicsMagick 1.3.8_0 +q8 is active
> DEBUG: Merging existing variants q8 into variants
> DEBUG: new fully merged portvariants: q8 +
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/GraphicsMagick
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port GraphicsMagick.
> DEBUG: Requested variant i386 is not provided by port GraphicsMagick.
> DEBUG: Requested variant macosx is not provided by port GraphicsMagick.
> DEBUG: Executing variant q8 provides q8
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libxml2 2.7.6_0 exists in the ports tree
> DEBUG: libxml2 2.7.6_0  is the latest installed
> DEBUG: libxml2 2.7.6_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libxml2.
> DEBUG: Requested variant i386 is not provided by port libxml2.
> DEBUG: Requested variant macosx is not provided by port libxml2.
> DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: tiff 3.9.2_2 exists in the ports tree
> DEBUG: tiff 3.9.2_2 +macosx is the latest installed
> DEBUG: tiff 3.9.2_2 +macosx is active
> DEBUG: Merging existing variants macosx into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port tiff.
> DEBUG: Requested variant i386 is not provided by port tiff.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: lcms 1.19_1 exists in the ports tree
> DEBUG: lcms 1.19_1  is the latest installed
> DEBUG: lcms 1.19_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port lcms.
> DEBUG: Requested variant i386 is not provided by port lcms.
> DEBUG: Requested variant macosx is not provided by port lcms.
> DEBUG: No need to upgrade! lcms 1.19_1 >= lcms 1.19_1
> DEBUG: No need to upgrade! GraphicsMagick 1.3.8_0 >= GraphicsMagick
> 1.3.8_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/gnuplot
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gnuplot 4.2.5_1 exists in the ports tree
> DEBUG: gnuplot 4.2.5_1 +darwin is the latest installed
> DEBUG: gnuplot 4.2.5_1 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/gnuplot
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant i386 is not provided by port gnuplot.
> DEBUG: Requested variant macosx is not provided by port gnuplot.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/print/pdflib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pdflib 7.0.4_0 exists in the ports tree
> DEBUG: pdflib 7.0.4_0  is the latest installed
> DEBUG: pdflib 7.0.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/print/pdflib
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port pdflib.
> DEBUG: Requested variant i386 is not provided by port pdflib.
> DEBUG: Requested variant macosx is not provided by port pdflib.
> DEBUG: No need to upgrade! pdflib 7.0.4_0 >= pdflib 7.0.4_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/readline
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: readline 6.1.000_1 exists in the ports tree
> DEBUG: readline 6.1.000_1 +darwin is the latest installed
> DEBUG: readline 6.1.000_1 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/readline
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port readline.
> DEBUG: Requested variant macosx is not provided by port readline.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/aqua/aquaterm
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: aquaterm 1.0.1_5 exists in the ports tree
> DEBUG: aquaterm 1.0.1_5  is the latest installed
> DEBUG: aquaterm 1.0.1_5  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/aqua/aquaterm
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcode-1.0.tcl
> DEBUG: Re-registering default for use_configure
> DEBUG: Re-registering default for build.cmd
> DEBUG: Re-registering default for build.pre_args
> DEBUG: Re-registering default for build.target
> DEBUG: Re-registering default for destroot.cmd
> DEBUG: Re-registering default for destroot.pre_args
> DEBUG: Re-registering default for destroot.target
> DEBUG: Re-registering default for destroot.destdir
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port aquaterm.
> DEBUG: Requested variant i386 is not provided by port aquaterm.
> DEBUG: Requested variant macosx is not provided by port aquaterm.
> DEBUG: No need to upgrade! aquaterm 1.0.1_5 >= aquaterm 1.0.1_5
> DEBUG: No need to upgrade! gnuplot 4.2.5_1 >= gnuplot 4.2.5_1
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/science/hdf5-18
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: hdf5-18 1.8.4_0 exists in the ports tree
> DEBUG: hdf5-18 1.8.4_0  is the latest installed
> DEBUG: hdf5-18 1.8.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/science/hdf5-18
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port hdf5-18.
> DEBUG: Requested variant i386 is not provided by port hdf5-18.
> DEBUG: Requested variant macosx is not provided by port hdf5-18.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/szip
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: szip 2.1_1 exists in the ports tree
> DEBUG: szip 2.1_1  is the latest installed
> DEBUG: szip 2.1_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/archivers/szip
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port szip.
> DEBUG: Requested variant i386 is not provided by port szip.
> DEBUG: Requested variant macosx is not provided by port szip.
> DEBUG: No need to upgrade! szip 2.1_1 >= szip 2.1_1
> DEBUG: No need to upgrade! hdf5-18 1.8.4_0 >= hdf5-18 1.8.4_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/metis
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: metis 4.0.1_0 exists in the ports tree
> DEBUG: metis 4.0.1_0  is the latest installed
> DEBUG: metis 4.0.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/metis
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port metis.
> DEBUG: Requested variant i386 is not provided by port metis.
> DEBUG: Requested variant macosx is not provided by port metis.
> DEBUG: No need to upgrade! metis 4.0.1_0 >= metis 4.0.1_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pcre 7.9_0 exists in the ports tree
> DEBUG: pcre 7.9_0  is the latest installed
> DEBUG: pcre 7.9_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port pcre.
> DEBUG: Requested variant i386 is not provided by port pcre.
> DEBUG: Requested variant macosx is not provided by port pcre.
> DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/qhull
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: qhull 2010.1_2 exists in the ports tree
> DEBUG: qhull 2010.1_2  is the latest installed
> DEBUG: qhull 2010.1_2  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/qhull
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port qhull.
> DEBUG: Requested variant i386 is not provided by port qhull.
> DEBUG: Requested variant macosx is not provided by port qhull.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: cmake 2.8.0_0 exists in the ports tree
> DEBUG: cmake 2.8.0_0  is the latest installed
> DEBUG: cmake 2.8.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port cmake.
> DEBUG: Requested variant i386 is not provided by port cmake.
> DEBUG: Requested variant macosx is not provided by port cmake.
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libidn 1.15_0 exists in the ports tree
> DEBUG: libidn 1.15_0  is the latest installed
> DEBUG: libidn 1.15_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libidn.
> DEBUG: Requested variant i386 is not provided by port libidn.
> DEBUG: Requested variant macosx is not provided by port libidn.
> DEBUG: No need to upgrade! libidn 1.15_0 >= libidn 1.15_0
> DEBUG: No need to upgrade! cmake 2.8.0_0 >= cmake 2.8.0_0
> DEBUG: No need to upgrade! qhull 2010.1_2 >= qhull 2010.1_2
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/qrupdate
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: qrupdate 1.0.1_0 exists in the ports tree
> DEBUG: qrupdate 1.0.1_0 +gcc43 is the latest installed
> DEBUG: qrupdate 1.0.1_0 +gcc43 is active
> DEBUG: Merging existing variants gcc43 into variants
> DEBUG: new fully merged portvariants: gcc43 +
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/qrupdate
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: not using configure, so not adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port qrupdate.
> DEBUG: Requested variant i386 is not provided by port qrupdate.
> DEBUG: Requested variant macosx is not provided by port qrupdate.
> DEBUG: Executing variant gcc43 provides gcc43
> DEBUG: No need to upgrade! qrupdate 1.0.1_0 >= qrupdate 1.0.1_0
> DEBUG: Found port in
> file:///Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/SuiteSparse
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: SuiteSparse 3.4.0_0 exists in the ports tree
> DEBUG: SuiteSparse 3.4.0_0  is the latest installed
> DEBUG: SuiteSparse 3.4.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /Users/akt/macports/var/macports/sources/rsync.macports.org/release/ports/math/SuiteSparse
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: not using configure, so not adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port SuiteSparse.
> DEBUG: Requested variant i386 is not provided by port SuiteSparse.
> DEBUG: Requested variant macosx is not provided by port SuiteSparse.
> DEBUG: No need to upgrade! SuiteSparse 3.4.0_0 >= SuiteSparse 3.4.0_0
> DEBUG: No need to upgrade! octave 3.2.3_2 >= octave 3.2.3_2
> --->  Computing dependencies for octave-odepkg
> DEBUG: Searching for dependency: octave
> DEBUG: Found Dependency: receipt exists for octave
> DEBUG: Executing org.macports.main (octave-odepkg)
> MacPorts running without privileges. You may be unable to complete
> certain actions (eg install).
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: Skipping completed org.macports.fetch (octave-odepkg)
> MacPorts running without privileges. You may be unable to complete
> certain actions (eg install).
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: Skipping completed org.macports.checksum (octave-odepkg)
> MacPorts running without privileges. You may be unable to complete
> certain actions (eg install).
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: Skipping completed org.macports.extract (octave-odepkg)
> MacPorts running without privileges. You may be unable to complete
> certain actions (eg install).
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: Skipping completed org.macports.patch (octave-odepkg)
> MacPorts running without privileges. You may be unable to complete
> certain actions (eg install).
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: Skipping completed org.macports.configure (octave-odepkg)
> MacPorts running without privileges. You may be unable to complete
> certain actions (eg install).
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: Skipping completed org.macports.build (octave-odepkg)
> MacPorts running without privileges. You may be unable to complete
> certain actions (eg install).
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: Skipping completed org.macports.destroot (octave-odepkg)
> MacPorts running without privileges. You may be unable to complete
> certain actions (eg install).
> DEBUG: Privilege de-escalation not attempted as not running as root.
> --->  Installing octave-odepkg @0.6.7_0
> DEBUG: Executing org.macports.install (octave-odepkg)
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-odepkg/0.6.7_0/Users
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-odepkg/0.6.7_0/Users/akt
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-odepkg/0.6.7_0/Users/akt/macports
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-odepkg/0.6.7_0/Users/akt/macports/libexec
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-odepkg/0.6.7_0/Users/akt/macports/libexec/octave
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-odepkg/0.6.7_0/Users/akt/macports/libexec/octave/packages
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-
> odepkg/0.6.7_0/Users/akt/macports/libexec/octave/packages/odepkg-0.6.7
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-
> odepkg/0.6.7_0/Users/akt/macports/libexec/octave/packages/odepkg-0.6.7/i386
> -apple-darwin9.8.0-api-v37
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/libexec/octave/packages/odepkg-0.6.7/i386
> -apple-darwin9.8.0-api-v37/dldsolver.oct
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/libexec/octave/packages/odepkg-0.6.7/i386
> -apple-darwin9.8.0-api-v37/PKG_ADD
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-odepkg/0.6.7_0/Users/akt/macports/share
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-odepkg/0.6.7_0/Users/akt/macports/share/octave
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/octave_packages_octave-
> odepkg
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-odepkg/0.6.7_0/Users/akt/macports/share/octave/packages
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/bvp4c.m
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/dldfunref.texi
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/Makefile
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/mfunref.texi
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/odepkg.pdf
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/odepkg.texi
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc-
> cache
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc.info
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode23.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode23d.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode45.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode45d.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode54.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode54d.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode78.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode78d.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeexamples.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeget.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odephas2.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odephas3.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_event_handle.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_dae.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_dde.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_ide.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_ode.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_structure_check.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_calcmescd.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_calcscd.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_chemakzo.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_hires.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_implakzo.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_implrober.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_impltrans.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_oregonator.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_pollution.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_robertson.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_transistor.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeplot.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeprint.m
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeset.m
> DEBUG: installing directory: /Users/akt/macports/var/macports/software
> /octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/.autoload
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/ChangeLog
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/COPYING
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/DESCRIPTION
> DEBUG: installing file: /Users/akt/macports/var/macports/software/octave-
> odepkg/0.6.7_0/Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/INDEX
> DEBUG: Executing org.macports.activate (octave-odepkg)
> --->  Activating octave-odepkg @0.6.7_0
> DEBUG: activating directory: /
> DEBUG: activating directory: /Users
> DEBUG: activating directory: /Users/akt
> DEBUG: activating directory: /Users/akt/macports
> DEBUG: activating directory: /Users/akt/macports/libexec
> DEBUG: activating directory: /Users/akt/macports/libexec/octave
> DEBUG: activating directory: /Users/akt/macports/libexec/octave/packages
> DEBUG: activating directory:
> /Users/akt/macports/libexec/octave/packages/odepkg-0.6.7
> DEBUG: activating directory:
> /Users/akt/macports/libexec/octave/packages/odepkg-0.6.7/i386-apple-
> darwin9.8.0-api-v37
> DEBUG: activating file:
> /Users/akt/macports/libexec/octave/packages/odepkg-0.6.7/i386-apple-
> darwin9.8.0-api-v37/PKG_ADD
> DEBUG: activating file:
> /Users/akt/macports/libexec/octave/packages/odepkg-0.6.7/i386-apple-
> darwin9.8.0-api-v37/dldsolver.oct
> DEBUG: activating directory: /Users/akt/macports/share
> DEBUG: activating directory: /Users/akt/macports/share/octave
> DEBUG: activating file: /Users/akt/macports/share/octave
> /octave_packages_octave-odepkg
> DEBUG: activating directory: /Users/akt/macports/share/octave/packages
> DEBUG: activating directory:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/bvp4c.m
> DEBUG: activating directory:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc-cache
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc.info
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/Makefile
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/dldfunref.texi
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/mfunref.texi
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/odepkg.pdf
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/odepkg.texi
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode23.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode23d.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode45.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode45d.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode54.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode54d.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode78.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode78d.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeexamples.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeget.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odephas2.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odephas3.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_event_handle.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_dae.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_dde.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_ide.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_ode.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_structure_check.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_calcmescd.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_calcscd.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_chemakzo.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_hires.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_implakzo.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_implrober.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_impltrans.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_oregonator.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_pollution.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_robertson.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_transistor.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeplot.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeprint.m
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeset.m
> DEBUG: activating directory:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/.autoload
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/COPYING
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/ChangeLog
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/DESCRIPTION
> DEBUG: activating file:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/INDEX
> DEBUG: Adding file to file_map:
> /Users/akt/macports/libexec/octave/packages/odepkg-0.6.7/i386-apple-
> darwin9.8.0-api-v37/dldsolver.oct for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/libexec/octave/packages/odepkg-0.6.7/i386-apple-
> darwin9.8.0-api-v37/PKG_ADD for: octave-odepkg
> DEBUG: Adding file to file_map: /Users/akt/macports/share/octave
> /octave_packages_octave-odepkg for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/bvp4c.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/dldfunref.texi
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/Makefile for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/mfunref.texi
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/odepkg.pdf
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc/odepkg.texi
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc-cache for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/doc.info for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode23.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode23d.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode45.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode45d.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode54.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode54d.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode78.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/ode78d.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeexamples.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeget.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odephas2.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odephas3.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_event_handle.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_dae.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_dde.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_ide.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_examples_ode.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_structure_check.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_calcmescd.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_calcscd.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_chemakzo.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_hires.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_implakzo.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_implrober.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_impltrans.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_oregonator.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_pollution.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_robertson.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odepkg_testsuite_transistor.m
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeplot.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeprint.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/odeset.m for:
> octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/.autoload
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/ChangeLog
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/COPYING
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/DESCRIPTION
> for: octave-odepkg
> DEBUG: Adding file to file_map:
> /Users/akt/macports/share/octave/packages/odepkg-0.6.7/packinfo/INDEX
> for: octave-odepkg
> DEBUG: Executing proc-post-org.macports.activate-activate-0
> GNU Octave, version 3.2.3
> Copyright (C) 2009 John W. Eaton and others.
> This is free software; see the source code for copying conditions.
> There is ABSOLUTELY NO WARRANTY; not even for MERCHANTABILITY or
> FITNESS FOR A PARTICULAR PURPOSE.  For details, type `warranty'.
>
> Octave was configured for "i386-apple-darwin9.8.0".
>
> Additional information about Octave is available at
> http://www.octave.org.
>
> Please contribute if you find this software useful.
> For more information, visit http://www.octave.org/help-wanted.html
>
> Report bugs to <bug at octave.org> (but first, please read
> http://www.octave.org/bugs.html to learn how to write a helpful report).
>
> For information about changes from previous versions, type `news'.
>
> error: couldn't read directory /Users/akt/octave: No such file or
> directory
> error: called from:
> error:   /Users/akt/macports/share/octave/3.2.3/m/pkg/pkg.m at line 426,
> column 7
> error:   /Users/akt/macports/share/octave/3.2.3/m/pkg/pkg.m at line 380,
> column 17
> Error: Target org.macports.activate returned: shell command "octave
> --eval "pkg rebuild"" returned error 1
> DEBUG: Backtrace: shell command "octave --eval "pkg rebuild"" returned
> error 1
>     while executing
> "$post $targetname"
> Warning: the following items did not execute (for octave-odepkg):
> org.macports.activate
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
>

> }}}

New description:

 I have recently installed Octave 3.2.3 onto my Mac (MacBook Pro, OSX
 10.5.8) using Macports (Version: 1.8.2) successfully and am trying to
 install the octave-odepkg 0.6.7 package using Macports. While octave has
 been installed successfully I get error messages when I try to install
 octave-odepkg:

 {{{
 error: couldn't read directory /Users/akt/octave: No such file or
 directory
 error: called from:
 error:   /Users/akt/macports/share/octave/3.2.3/m/pkg/pkg.m at line 426,
 column 7
 error:   /Users/akt/macports/share/octave/3.2.3/m/pkg/pkg.m at line 380,
 column 17
 Error: Target org.macports.activate returned: shell command "octave --eval
 "pkg rebuild"" returned error 1
 DEBUG: Backtrace: shell command "octave --eval "pkg rebuild"" returned
 error 1
     while executing
 "$post $targetname"
 Warning: the following items did not execute (for octave-odepkg):
 org.macports.activate
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>
 }}}


 I installed octave with the command:
 "port install octave" and octave-odepkg with the command "port install
 octave-odepkg". I am using an non-admin install of Macports. The full log
 output (which is also attached) from the octave-odepkg, obtained with the
 -d flag is attached.

--

-- 
Ticket URL: <http://trac.macports.org/ticket/24114#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS