[MacPorts] #24222: icecast2 +universal build failed - snow leopard
MacPorts
noreply at macports.org
Sat Mar 27 08:36:48 PDT 2010
#24222: icecast2 +universal build failed - snow leopard
-----------------------------------+----------------------------------------
Reporter: nickbabenko@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: | Port: icecast2
-----------------------------------+----------------------------------------
Comment(by nickbabenko@…):
Replying to [comment:2 jmr@…]:
> Attach full debug output. (The -d needs to go right after 'port'.)
{{{
sudo port -d install icecast2 +universal
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/icecast2
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/icecast2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port icecast2.
DEBUG: Requested variant i386 is not provided by port icecast2.
DEBUG: Requested variant macosx is not provided by port icecast2.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxslt 1.1.26_0 exists in the ports tree
DEBUG: libxslt 1.1.26_0 +universal is the latest installed
DEBUG: libxslt 1.1.26_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libxslt.
DEBUG: Requested variant i386 is not provided by port libxslt.
DEBUG: Requested variant macosx is not provided by port libxslt.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxml2 2.7.7_0 exists in the ports tree
DEBUG: libxml2 2.7.7_0 +universal is the latest installed
DEBUG: libxml2 2.7.7_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libxml2.
DEBUG: Requested variant i386 is not provided by port libxml2.
DEBUG: Requested variant macosx is not provided by port libxml2.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
2DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.4_1 exists in the ports tree
DEBUG: zlib 1.2.4_1 is the latest installed
DEBUG: zlib 1.2.4_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! zlib 1.2.4_1 >= zlib 1.2.4_1
DEBUG: No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0
DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: curl 7.20.0_0 exists in the ports tree
DEBUG: curl 7.20.0_0 +ssl is the latest installed
DEBUG: curl 7.20.0_0 +ssl is active
DEBUG: Merging existing variants ssl into variants
DEBUG: new fully merged portvariants: ssl +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port curl.
DEBUG: Requested variant i386 is not provided by port curl.
DEBUG: Requested variant macosx is not provided by port curl.
DEBUG: Executing variant ssl provides ssl
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1 is the latest installed
DEBUG: pkgconfig 0.23_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libidn 1.16_0 exists in the ports tree
DEBUG: libidn 1.16_0 is the latest installed
DEBUG: libidn 1.16_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libidn.
DEBUG: Requested variant i386 is not provided by port libidn.
DEBUG: Requested variant macosx is not provided by port libidn.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 is the latest installed
DEBUG: gettext 0.17_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! libidn 1.16_0 >= libidn 1.16_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8n_0 exists in the ports tree
DEBUG: openssl 0.9.8n_0 +darwin is the latest installed
DEBUG: openssl 0.9.8n_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! openssl 0.9.8n_0 >= openssl 0.9.8n_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net
/curl-ca-bundle
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: curl-ca-bundle 7.20.0_0 exists in the ports tree
DEBUG: curl-ca-bundle 7.20.0_0 is the latest installed
DEBUG: curl-ca-bundle 7.20.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-
ca-bundle
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port curl-ca-bundle.
DEBUG: Requested variant i386 is not provided by port curl-ca-bundle.
DEBUG: Requested variant macosx is not provided by port curl-ca-bundle.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0 is the latest installed
DEBUG: perl5 5.8.9_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 is the latest installed
DEBUG: perl5.8 5.8.9_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: No need to upgrade! curl-ca-bundle 7.20.0_0 >= curl-ca-bundle
7.20.0_0
DEBUG: No need to upgrade! curl 7.20.0_0 >= curl 7.20.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libvorbis 1.2.3_0 exists in the ports tree
DEBUG: libvorbis 1.2.3_0 +universal is the latest installed
DEBUG: libvorbis 1.2.3_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libvorbis.
DEBUG: Requested variant i386 is not provided by port libvorbis.
DEBUG: Requested variant macosx is not provided by port libvorbis.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libogg 1.2.0_0 exists in the ports tree
DEBUG: libogg 1.2.0_0 +universal is the latest installed
DEBUG: libogg 1.2.0_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libogg.
DEBUG: Requested variant i386 is not provided by port libogg.
DEBUG: Requested variant macosx is not provided by port libogg.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libogg 1.2.0_0 >= libogg 1.2.0_0
DEBUG: No need to upgrade! libvorbis 1.2.3_0 >= libvorbis 1.2.3_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: libtheora 1.1.1_0 exists in the ports tree
DEBUG: libtheora 1.1.1_0 +universal is the latest installed
DEBUG: libtheora 1.1.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port libtheora.
DEBUG: Requested variant i386 is not provided by port libtheora.
DEBUG: Requested variant macosx is not provided by port libtheora.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libtheora 1.1.1_0 >= libtheora 1.1.1_0
---> Computing dependencies for icecast2
DEBUG: Searching for dependency: libxslt
DEBUG: Found Dependency: receipt exists for libxslt
DEBUG: Searching for dependency: curl
DEBUG: Found Dependency: receipt exists for curl
DEBUG: Searching for dependency: libvorbis
DEBUG: Found Dependency: receipt exists for libvorbis
DEBUG: Searching for dependency: libtheora
DEBUG: Found Dependency: receipt exists for libtheora
DEBUG: Executing org.macports.main (icecast2)
DEBUG: Skipping completed org.macports.fetch (icecast2)
DEBUG: Skipping completed org.macports.checksum (icecast2)
DEBUG: Skipping completed org.macports.extract (icecast2)
DEBUG: Skipping completed org.macports.patch (icecast2)
DEBUG: Skipping completed org.macports.configure (icecast2)
---> Building icecast2
DEBUG: Executing org.macports.build (icecast2)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_icecast2/work/icecast-2.3.2"
&& /usr/bin/make -j2 all'
/usr/bin/make all-recursive
Making all in src
Making all in avl
make[3]: Nothing to be done for `all'.
Making all in thread
make[3]: Nothing to be done for `all'.
Making all in httpp
make[3]: Nothing to be done for `all'.
Making all in net
make[3]: Nothing to be done for `all'.
Making all in log
make[3]: Nothing to be done for `all'.
Making all in timing
make[3]: Nothing to be done for `all'.
/bin/sh ../libtool --tag=CC --mode=link /usr/bin/gcc-4.2 -O2 -arch
x86_64 -arch i386 -L/opt/local/lib -L/opt/local/lib -arch x86_64 -arch
i386 -o icecast cfgfile.o main.o logging.o sighandler.o connection.o
global.o util.o slave.o source.o stats.o refbuf.o client.o xslt.o fserve.o
event.o admin.o md5.o format.o format_ogg.o format_mp3.o format_midi.o
format_flac.o auth.o auth_htpasswd.o format_kate.o format_skeleton.o
format_vorbis.o format_theora.o net/libicenet.la thread/libicethread.la
httpp/libicehttpp.la log/libicelog.la avl/libiceavl.la
timing/libicetiming.la -lssl -lcrypto -ltheora -lvorbis -logg
-L/opt/local/lib -lxslt -lxml2 -lz -lpthread -liconv -lm
/usr/bin/gcc-4.2 -O2 -arch x86_64 -arch i386 -arch x86_64 -arch i386 -o
icecast cfgfile.o main.o logging.o sighandler.o connection.o global.o
util.o slave.o source.o stats.o refbuf.o client.o xslt.o fserve.o event.o
admin.o md5.o format.o format_ogg.o format_mp3.o format_midi.o
format_flac.o auth.o auth_htpasswd.o format_kate.o format_skeleton.o
format_vorbis.o format_theora.o -L/opt/local/lib net/.libs/libicenet.a
thread/.libs/libicethread.a httpp/.libs/libicehttpp.a
log/.libs/libicelog.a avl/.libs/libiceavl.a timing/.libs/libicetiming.a
-lssl -lcrypto /opt/local/lib/libtheora.dylib
/opt/local/lib/libvorbis.dylib /opt/local/lib/libogg.dylib
/opt/local/lib/libxslt.dylib /opt/local/lib/libxml2.dylib -lz -lpthread
/opt/local/lib/libiconv.dylib -lm
ld: warning: in /opt/local/lib/libssl.dylib, file was built for
unsupported file format which is not the architecture being linked (i386)
ld: warning: in /opt/local/lib/libcrypto.dylib, file was built for
unsupported file format which is not the architecture being linked (i386)
Undefined symbols for architecture i386:
"_SSL_load_error_strings", referenced from:
_connection_accept_loop in connection.o
"_SSL_CTX_check_private_key", referenced from:
_connection_accept_loop in connection.o
"_SSL_set_fd", referenced from:
_connection_uses_ssl in connection.o
"_SSL_new", referenced from:
_connection_uses_ssl in connection.o
"_SSL_CTX_use_PrivateKey_file", referenced from:
_connection_accept_loop in connection.o
"_SSL_set_accept_state", referenced from:
_connection_uses_ssl in connection.o
"_SSL_CTX_new", referenced from:
_connection_accept_loop in connection.o
"_SSLv23_server_method", referenced from:
_connection_accept_loop in connection.o
"_SSL_get_error", referenced from:
_connection_send_ssl in connection.o
_connection_read_ssl in connection.o
"_SSL_CTX_use_certificate_file", referenced from:
_connection_accept_loop in connection.o
"_SSL_read", referenced from:
_connection_read_ssl in connection.o
"_SSL_library_init", referenced from:
_connection_accept_loop in connection.o
"_SSL_shutdown", referenced from:
_connection_close in connection.o
"_SSL_CTX_free", referenced from:
_connection_shutdown in connection.o
"_SSL_free", referenced from:
_connection_close in connection.o
"_SSL_write", referenced from:
_connection_send_ssl in connection.o
ld: symbol(s) not found for architecture i386
collect2: ld returned 1 exit status
lipo: can't open input file: /var/tmp//ccqP3yTG.out (No such file or
directory)
make[3]: *** [icecast] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_icecast2/work/icecast-2.3.2"
&& /usr/bin/make -j2 all " returned error 2
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_icecast2/work/icecast-2.3.2"
&& /usr/bin/make -j2 all " returned error 2
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for icecast2):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
--
Ticket URL: <http://trac.macports.org/ticket/24222#comment:3>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list