[MacPorts] #24783: omake @0.9.8.5-3, Revision 1 (devel) cannot be installed encountering build src/clib lm_printf.o
MacPorts
noreply at macports.org
Tue May 4 08:29:41 PDT 2010
#24783: omake @0.9.8.5-3, Revision 1 (devel) cannot be installed encountering build
src/clib lm_printf.o
------------------------------+---------------------------------------------
Reporter: fu7mu4@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: | Port: omake
------------------------------+---------------------------------------------
I counld not install omake. here is stdout of build steps.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/omake
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/omake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port omake.
DEBUG: Requested variant i386 is not provided by port omake.
DEBUG: Requested variant macosx is not provided by port omake.
DEBUG: Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_omake/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/omake/work
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ocaml
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ocaml 3.11.2_0 exists in the ports tree
DEBUG: ocaml 3.11.2_0 +labltk is the latest installed
DEBUG: ocaml 3.11.2_0 +labltk is active
DEBUG: Merging existing variants labltk into variants
DEBUG: new fully merged portvariants: labltk +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ocaml
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port ocaml.
DEBUG: Requested variant i386 is not provided by port ocaml.
DEBUG: Requested variant macosx is not provided by port ocaml.
DEBUG: Executing variant labltk provides labltk
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tcl 8.5.8_0 exists in the ports tree
DEBUG: tcl 8.5.8_0 +darwin is the latest installed
DEBUG: tcl 8.5.8_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port tcl.
DEBUG: Requested variant macosx is not provided by port tcl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tk 8.5.8_0 exists in the ports tree
DEBUG: tk 8.5.8_0 +darwin is the latest installed
DEBUG: tk 8.5.8_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port tk.
DEBUG: Requested variant macosx is not provided by port tk.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1 is the latest installed
DEBUG: pkgconfig 0.23_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.1.14_0 exists in the ports tree
DEBUG: Xft2 2.1.14_0 is the latest installed
DEBUG: Xft2 2.1.14_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port Xft2.
DEBUG: Requested variant i386 is not provided by port Xft2.
DEBUG: Requested variant macosx is not provided by port Xft2.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0 is the latest installed
DEBUG: zlib 1.2.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.5_0 exists in the ports tree
DEBUG: xrender 0.9.5_0 is the latest installed
DEBUG: xrender 0.9.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xrender.
DEBUG: Requested variant i386 is not provided by port xrender.
DEBUG: Requested variant macosx is not provided by port xrender.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libX11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
DEBUG: xorg-libX11 1.3.3_0 is the latest installed
DEBUG: xorg-libX11 1.3.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant i386 is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-util-macros
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-util-macros 1.7.0_0 exists in the ports tree
DEBUG: xorg-util-macros 1.7.0_0 is the latest installed
DEBUG: xorg-util-macros 1.7.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
util-macros
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
DEBUG: No need to upgrade! xorg-util-macros 1.7.0_0 >= xorg-util-macros
1.7.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xtrans
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
DEBUG: xorg-xtrans 1.2.5_0 is the latest installed
DEBUG: xorg-xtrans 1.2.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xtrans
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-bigreqsproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed
DEBUG: xorg-bigreqsproto 1.1.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
bigreqsproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
1.1.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xcmiscproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed
DEBUG: xorg-xcmiscproto 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xcmiscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
1.2.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xextproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0 is the latest installed
DEBUG: xorg-xextproto 7.1.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
7.1.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xf86bigfontproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed
DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xf86bigfontproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-
xf86bigfontproto.
DEBUG: Requested variant i386 is not provided by port xorg-
xf86bigfontproto.
DEBUG: Requested variant macosx is not provided by port xorg-
xf86bigfontproto.
DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
xf86bigfontproto 1.2.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-inputproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
DEBUG: xorg-inputproto 2.0_0 is the latest installed
DEBUG: xorg-inputproto 2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
inputproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXdmcp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.16_0 is the latest installed
DEBUG: xorg-xproto 7.0.16_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant i386 is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXau
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0 is the latest installed
DEBUG: xorg-libXau 1.0.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant i386 is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-kbproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.4_0 is the latest installed
DEBUG: xorg-kbproto 1.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-renderproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11_0 is the latest installed
DEBUG: xorg-renderproto 0.11_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
renderproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
0.11_0
DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.12_0 exists in the ports tree
DEBUG: freetype 2.3.12_0 +macosx is the latest installed
DEBUG: freetype 2.3.12_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port freetype.
DEBUG: Requested variant i386 is not provided by port freetype.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.8.0_0 exists in the ports tree
DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
DEBUG: fontconfig 2.8.0_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port fontconfig.
DEBUG: Requested variant i386 is not provided by port fontconfig.
DEBUG: Executing variant macosx provides macosx
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXScrnSaver
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
DEBUG: xorg-libXScrnSaver 1.2.0_0 is the latest installed
DEBUG: xorg-libXScrnSaver 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXScrnSaver
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-
libXScrnSaver.
DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver.
DEBUG: Requested variant macosx is not provided by port xorg-
libXScrnSaver.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
DEBUG: xorg-libXext 1.1.1_0 is the latest installed
DEBUG: xorg-libXext 1.1.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXext.
DEBUG: Requested variant i386 is not provided by port xorg-libXext.
DEBUG: Requested variant macosx is not provided by port xorg-libXext.
DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-scrnsaverproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-scrnsaverproto 1.2.0_0 is the latest installed
DEBUG: xorg-scrnsaverproto 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
scrnsaverproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-
scrnsaverproto.
DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto.
DEBUG: Requested variant macosx is not provided by port xorg-
scrnsaverproto.
DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-
scrnsaverproto 1.2.0_0
DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-
libXScrnSaver 1.2.0_0
DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0
DEBUG: No need to upgrade! ocaml 3.11.2_0 >= ocaml 3.11.2_0
---> Computing dependencies for omake
DEBUG: Searching for dependency: ocaml
DEBUG: Found Dependency: receipt exists for ocaml
DEBUG: Executing org.macports.main (omake)
---> Fetching omake
DEBUG: Executing org.macports.fetch (omake)
---> Verifying checksum(s) for omake
DEBUG: Executing org.macports.checksum (omake)
---> Checksumming omake-0.9.8.5-3.tar.gz
DEBUG: Correct (md5) checksum for omake-0.9.8.5-3.tar.gz
DEBUG: Correct (sha1) checksum for omake-0.9.8.5-3.tar.gz
DEBUG: Correct (rmd160) checksum for omake-0.9.8.5-3.tar.gz
---> Extracting omake
DEBUG: Executing org.macports.extract (omake)
---> Extracting omake-0.9.8.5-3.tar.gz
DEBUG: setting option extract.args to
/opt/local/var/macports/distfiles/omake/omake-0.9.8.5-3.tar.gz
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_omake/work"
&& /usr/bin/gzip -dc
/opt/local/var/macports/distfiles/omake/omake-0.9.8.5-3.tar.gz |
/usr/bin/gnutar --no-same-owner -xf -'
DEBUG: Executing org.macports.patch (omake)
---> Applying patches to omake
---> Applying
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/omake/files
/patch-stdin_stdout.bin.diff
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_omake/work/omake-0.9.8.5"
&& /usr/bin/patch -p0'
patching file src/build/omake_rule.ml
---> Applying
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/omake/files
/patch-omake.diff
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_omake/work/omake-0.9.8.5"
&& /usr/bin/patch -p0'
patching file src/exec/omake_exec.ml
---> Configuring omake
DEBUG: Using compiler 'Mac OS X gcc 4.2'
DEBUG: Executing org.macports.configure (omake)
---> Building omake
DEBUG: Executing org.macports.build (omake)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' PREFIX='/opt/local'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_omake/work/omake-0.9.8.5"
&& /usr/bin/make -j2 all'
mkdir -p boot
ln -sf ../src/Makefile boot/Makefile
ln -sf ../src/clib/omake_shell_sys.c omake_shell_sys.c
ln -sf ../src/clib/readline.c readline.c
ln -sf ../src/clib/../libmojave-external/cutil/lm_heap.c lm_heap.c
ln -sf ../src/clib/../libmojave-external/cutil/lm_heap.h lm_heap.h
ln -sf ../src/clib/../libmojave-external/cutil/lm_channel.c lm_channel.c
ln -sf ../src/clib/../libmojave-external/cutil/lm_compat_win32.c
lm_compat_win32.c
ln -sf ../src/clib/../libmojave-external/cutil/lm_compat_win32.h
lm_compat_win32.h
ln -sf ../src/clib/../libmojave-external/cutil/lm_ctype.c lm_ctype.c
ln -sf ../src/clib/../libmojave-external/cutil/lm_printf.c lm_printf.c
ln -sf ../src/clib/../libmojave-external/cutil/lm_uname_ext.c
lm_uname_ext.c
ln -sf ../src/clib/../libmojave-external/cutil/lm_unix_cutil.c
lm_unix_cutil.c
ln -sf ../src/clib/../libmojave-external/cutil/unixsupport.h unixsupport.h
ln -sf ../src/clib/../libmojave-external/cutil/fam_win32.c fam_win32.c
ln -sf ../src/clib/../libmojave-external/cutil/fam_kqueue.c fam_kqueue.c
ln -sf ../src/clib/../libmojave-external/cutil/fam_inotify.c fam_inotify.c
ln -sf ../src/clib/../libmojave-external/cutil/fam_pseudo.h fam_pseudo.h
ln -sf ../src/clib/../libmojave-external/cutil/lm_notify.c lm_notify.c
ln -sf ../src/clib/../libmojave-external/cutil/inotify.h inotify.h
ln -sf ../src/clib/../libmojave-external/cutil/inotify-syscalls.h inotify-
syscalls.h
ln -sf ../src/clib/../libmojave-external/cutil/inotify.om inotify.om
ln -sf ../src/clib/../libmojave-external/cutil/lm_termsize.c lm_termsize.c
ln -sf ../src/clib/../libmojave-external/cutil/lm_terminfo.c lm_terminfo.c
ln -sf ../src/clib/../libmojave-external/cutil/lm_fs_case_sensitive.c
lm_fs_case_sensitive.c
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_printf.ml
lm_printf.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_debug.ml
lm_debug.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_heap.ml lm_heap.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_list_util.ml
lm_list_util.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_array_util.ml
lm_array_util.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_set_sig.ml
lm_set_sig.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_set.ml lm_set.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_map_sig.ml
lm_map_sig.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_map.ml lm_map.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_int_set.ml
lm_int_set.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_index.ml
lm_index.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_thread_sig.ml
lm_thread_sig.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_thread.ml
lm_thread.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_string_util.ml
lm_string_util.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_string_set.ml
lm_string_set.ml
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_printf.mli
lm_printf.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_debug.mli
lm_debug.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_list_util.mli
lm_list_util.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_array_util.mli
lm_array_util.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_set.mli lm_set.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_map.mli lm_map.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_int_set.mli
lm_int_set.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_index.mli
lm_index.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_thread_core.mli
lm_thread_core.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_thread.mli
lm_thread.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_string_util.mli
lm_string_util.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_string_set.mli
lm_string_set.mli
ln -sf ../src/libmojave/../libmojave-external/stdlib/lm_thread_pool.mli
lm_thread_pool.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_arg.ml lm_arg.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_hash_sig.ml
lm_hash_sig.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_hash.ml lm_hash.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_location.ml
lm_location.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_position.ml
lm_position.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_channel.ml
lm_channel.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_lexer.ml lm_lexer.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_parser.ml
lm_parser.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_glob.ml lm_glob.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_db.ml lm_db.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_arg.mli lm_arg.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_hash.mli lm_hash.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_location.mli
lm_location.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_position.mli
lm_position.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_channel.mli
lm_channel.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_lexer.mli
lm_lexer.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_parser.mli
lm_parser.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_glob.mli lm_glob.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_db.mli lm_db.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_termsize.ml
lm_termsize.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_termsize.mli
lm_termsize.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_terminfo.ml
lm_terminfo.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_terminfo.mli
lm_terminfo.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_filename_util.ml
lm_filename_util.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_filename_util.mli
lm_filename_util.mli
ln -sf ../src/libmojave/../libmojave-external/unix/lm_uname.ml lm_uname.ml
ln -sf ../src/libmojave/../libmojave-external/unix/lm_unix_util.ml
lm_unix_util.ml
ln -sf ../src/libmojave/../libmojave-external/unix/lm_uname.mli
lm_uname.mli
ln -sf ../src/libmojave/../libmojave-external/unix/lm_unix_util.mli
lm_unix_util.mli
ln -sf ../src/libmojave/../libmojave-external/unix/lm_notify.ml
lm_notify.ml
ln -sf ../src/libmojave/../libmojave-external/unix/lm_notify.mli
lm_notify.mli
ln -sf ../src/libmojave/../libmojave-external/unix/lm_fs_case_sensitive.ml
lm_fs_case_sensitive.ml
ln -sf ../src/libmojave/../libmojave-
external/unix/lm_fs_case_sensitive.mli lm_fs_case_sensitive.mli
ln -sf ../src/libmojave/../libmojave-external/util/lm_symbol_hash.ml
lm_symbol.ml
ln -sf ../src/libmojave/../libmojave-external/util/lm_symbol_hash.mli
lm_symbol.mli
ln -sf ../src/libmojave/../libmojave-
external/stdlib/lm_thread_pool_null.ml lm_thread_pool.ml
ln -sf ../src/libmojave/../libmojave-
external/stdlib/lm_thread_core_null.ml lm_thread_core.ml
ln -sf ../src/util/fmarshal.ml fmarshal.ml
ln -sf ../src/util/ocaml_patch.mli ocaml_patch.mli
ln -sf ../src/util/omake_handle_table.ml omake_handle_table.ml
ln -sf ../src/util/omake_marshal.ml omake_marshal.ml
ln -sf ../src/util/omake_print_util.ml omake_print_util.ml
ln -sf ../src/util/omake_print_util.mli omake_print_util.mli
ln -sf ../src/util/omake_printf.ml omake_printf.ml
ln -sf ../src/util/omake_readline.ml omake_readline.ml
ln -sf ../src/util/omake_readline.mli omake_readline.mli
ln -sf ../src/util/omake_util.ml omake_util.ml
ln -sf ../src/util/omake_util.mli omake_util.mli
ln -sf ../src/util/omake_wild.ml omake_wild.ml
ln -sf ../src/util/omake_wild.mli omake_wild.mli
ln -sf ../src/util/ocaml_patch_unix.ml ocaml_patch.ml
ln -sf ../src/magic/omake_gen_magic.ml omake_gen_magic.ml
ln -sf ../src/ir/omake_cache.ml omake_cache.ml
ln -sf ../src/ir/omake_cache.mli omake_cache.mli
ln -sf ../src/ir/omake_cache_type.ml omake_cache_type.ml
ln -sf ../src/ir/omake_command.ml omake_command.ml
ln -sf ../src/ir/omake_command.mli omake_command.mli
ln -sf ../src/ir/omake_command_type.ml omake_command_type.ml
ln -sf ../src/ir/omake_install.ml omake_install.ml
ln -sf ../src/ir/omake_install.mli omake_install.mli
ln -sf ../src/ir/omake_ir.ml omake_ir.ml
ln -sf ../src/ir/omake_ir_free_vars.ml omake_ir_free_vars.ml
ln -sf ../src/ir/omake_ir_free_vars.mli omake_ir_free_vars.mli
ln -sf ../src/ir/omake_ir_print.ml omake_ir_print.ml
ln -sf ../src/ir/omake_ir_print.mli omake_ir_print.mli
ln -sf ../src/ir/omake_ir_util.ml omake_ir_util.ml
ln -sf ../src/ir/omake_ir_util.mli omake_ir_util.mli
ln -sf ../src/ir/omake_lexer.ml omake_lexer.ml
ln -sf ../src/ir/omake_node.ml omake_node.ml
ln -sf ../src/ir/omake_node.mli omake_node.mli
ln -sf ../src/ir/omake_node_sig.ml omake_node_sig.ml
ln -sf ../src/ir/omake_node_type.ml omake_node_type.ml
ln -sf ../src/ir/omake_options.ml omake_options.ml
ln -sf ../src/ir/omake_options.mli omake_options.mli
ln -sf ../src/ir/omake_parser.ml omake_parser.ml
ln -sf ../src/ir/omake_pos.ml omake_pos.ml
ln -sf ../src/ir/omake_pos.mli omake_pos.mli
ln -sf ../src/ir/omake_shell_type.ml omake_shell_type.ml
ln -sf ../src/ir/omake_state.ml omake_state.ml
ln -sf ../src/ir/omake_state.mli omake_state.mli
ln -sf ../src/ir/omake_symbol.ml omake_symbol.ml
ln -sf ../src/ir/omake_value_print.ml omake_value_print.ml
ln -sf ../src/ir/omake_value_print.mli omake_value_print.mli
ln -sf ../src/ir/omake_value_type.ml omake_value_type.ml
ln -sf ../src/ir/omake_var.ml omake_var.ml
ln -sf ../src/ir/omake_var.mli omake_var.mli
ln -sf ../src/ir/omake_virtual_id.ml omake_virtual_id.ml
ln -sf ../src/ir/omake_virtual_id.mli omake_virtual_id.mli
ln -sf ../src/exec/omake_exec.ml omake_exec.ml
ln -sf ../src/exec/omake_exec.mli omake_exec.mli
ln -sf ../src/exec/omake_exec_id.ml omake_exec_id.ml
ln -sf ../src/exec/omake_exec_id.mli omake_exec_id.mli
ln -sf ../src/exec/omake_exec_local.ml omake_exec_local.ml
ln -sf ../src/exec/omake_exec_local.mli omake_exec_local.mli
ln -sf ../src/exec/omake_exec_notify.ml omake_exec_notify.ml
ln -sf ../src/exec/omake_exec_notify.mli omake_exec_notify.mli
ln -sf ../src/exec/omake_exec_print.ml omake_exec_print.ml
ln -sf ../src/exec/omake_exec_print.mli omake_exec_print.mli
ln -sf ../src/exec/omake_exec_remote.ml omake_exec_remote.ml
ln -sf ../src/exec/omake_exec_remote.mli omake_exec_remote.mli
ln -sf ../src/exec/omake_exec_type.ml omake_exec_type.ml
ln -sf ../src/exec/omake_exec_util.ml omake_exec_util.ml
ln -sf ../src/exec/omake_exec_util.mli omake_exec_util.mli
ln -sf ../src/ast/omake_ast.ml omake_ast.ml
ln -sf ../src/ast/omake_ast_print.ml omake_ast_print.ml
ln -sf ../src/ast/omake_ast_print.mli omake_ast_print.mli
ln -sf ../src/ast/omake_ast_util.ml omake_ast_util.ml
ln -sf ../src/ast/omake_ast_util.mli omake_ast_util.mli
ln -sf ../src/env/omake_ast_lex.mli omake_ast_lex.mli
ln -sf ../src/env/omake_command_digest.ml omake_command_digest.ml
ln -sf ../src/env/omake_command_digest.mli omake_command_digest.mli
ln -sf ../src/env/omake_env.ml omake_env.ml
ln -sf ../src/env/omake_env.mli omake_env.mli
ln -sf ../src/env/omake_exn_print.ml omake_exn_print.ml
ln -sf ../src/env/omake_exn_print.mli omake_exn_print.mli
ln -sf ../src/env/omake_gen_parse.ml omake_gen_parse.ml
ln -sf ../src/env/omake_ir_ast.ml omake_ir_ast.ml
ln -sf ../src/env/omake_ir_ast.mli omake_ir_ast.mli
ln -sf ../src/env/omake_ir_semant.ml omake_ir_semant.ml
ln -sf ../src/env/omake_ir_semant.mli omake_ir_semant.mli
ln -sf ../src/env/omake_ast_lex.mll omake_ast_lex.mll
ln -sf ../src/env/omake_ast_parse.input omake_ast_parse.input
ln -sf ../src/shell/omake_shell_completion.ml omake_shell_completion.ml
ln -sf ../src/shell/omake_shell_completion.mli omake_shell_completion.mli
ln -sf ../src/shell/omake_shell_job.ml omake_shell_job.ml
ln -sf ../src/shell/omake_shell_job.mli omake_shell_job.mli
ln -sf ../src/shell/omake_shell_lex.ml omake_shell_lex.ml
ln -sf ../src/shell/omake_shell_lex.mli omake_shell_lex.mli
ln -sf ../src/shell/omake_shell_sys.mli omake_shell_sys.mli
ln -sf ../src/shell/omake_shell_sys_type.ml omake_shell_sys_type.ml
ln -sf ../src/shell/omake_shell_parse.mly omake_shell_parse.mly
ln -sf ../src/shell/omake_shell_sys_unix.ml omake_shell_sys.ml
ln -sf ../src/eval/omake_eval.ml omake_eval.ml
ln -sf ../src/eval/omake_eval.mli omake_eval.mli
ln -sf ../src/eval/omake_value.ml omake_value.ml
ln -sf ../src/eval/omake_value.mli omake_value.mli
ln -sf ../src/build/omake_build.ml omake_build.ml
ln -sf ../src/build/omake_build.mli omake_build.mli
ln -sf ../src/build/omake_build_tee.ml omake_build_tee.ml
ln -sf ../src/build/omake_build_tee.mli omake_build_tee.mli
ln -sf ../src/build/omake_build_type.ml omake_build_type.ml
ln -sf ../src/build/omake_build_util.ml omake_build_util.ml
ln -sf ../src/build/omake_build_util.mli omake_build_util.mli
ln -sf ../src/build/omake_builtin.ml omake_builtin.ml
ln -sf ../src/build/omake_builtin.mli omake_builtin.mli
ln -sf ../src/build/omake_builtin_type.ml omake_builtin_type.ml
ln -sf ../src/build/omake_builtin_util.ml omake_builtin_util.ml
ln -sf ../src/build/omake_builtin_util.mli omake_builtin_util.mli
ln -sf ../src/build/omake_rule.ml omake_rule.ml
ln -sf ../src/build/omake_rule.mli omake_rule.mli
ln -sf ../src/build/omake_target.ml omake_target.ml
ln -sf ../src/build/omake_target.mli omake_target.mli
ln -sf ../src/builtin/omake_builtin_arith.ml omake_builtin_arith.ml
ln -sf ../src/builtin/omake_builtin_arith.mli omake_builtin_arith.mli
ln -sf ../src/builtin/omake_builtin_base.ml omake_builtin_base.ml
ln -sf ../src/builtin/omake_builtin_base.mli omake_builtin_base.mli
ln -sf ../src/builtin/omake_builtin_file.ml omake_builtin_file.ml
ln -sf ../src/builtin/omake_builtin_file.mli omake_builtin_file.mli
ln -sf ../src/builtin/omake_builtin_fun.ml omake_builtin_fun.ml
ln -sf ../src/builtin/omake_builtin_fun.mli omake_builtin_fun.mli
ln -sf ../src/builtin/omake_builtin_io.ml omake_builtin_io.ml
ln -sf ../src/builtin/omake_builtin_io.mli omake_builtin_io.mli
ln -sf ../src/builtin/omake_builtin_io_fun.ml omake_builtin_io_fun.ml
ln -sf ../src/builtin/omake_builtin_io_fun.mli omake_builtin_io_fun.mli
ln -sf ../src/builtin/omake_builtin_object.ml omake_builtin_object.ml
ln -sf ../src/builtin/omake_builtin_object.mli omake_builtin_object.mli
ln -sf ../src/builtin/omake_builtin_rule.ml omake_builtin_rule.ml
ln -sf ../src/builtin/omake_builtin_rule.mli omake_builtin_rule.mli
ln -sf ../src/builtin/omake_builtin_shell.ml omake_builtin_shell.ml
ln -sf ../src/builtin/omake_builtin_shell.mli omake_builtin_shell.mli
ln -sf ../src/builtin/omake_builtin_sys.ml omake_builtin_sys.ml
ln -sf ../src/builtin/omake_builtin_sys.mli omake_builtin_sys.mli
ln -sf ../src/builtin/omake_builtin_target.ml omake_builtin_target.ml
ln -sf ../src/builtin/omake_builtin_target.mli omake_builtin_target.mli
ln -sf ../src/builtin/omake_builtin_test.ml omake_builtin_test.ml
ln -sf ../src/builtin/omake_builtin_test.mli omake_builtin_test.mli
ln -sf ../src/main/cvs_realclean.ml cvs_realclean.ml
ln -sf ../src/main/omake_main.ml omake_main.ml
ln -sf ../src/main/omake_main.mli omake_main.mli
ln -sf ../src/main/omake_shell.ml omake_shell.ml
ln -sf ../src/main/omake_shell.mli omake_shell.mli
ocamllex omake_ast_lex.mll
ocamlc -c omake_gen_parse.ml
ocamlyacc omake_shell_parse.mly
ocamlc -custom -o omake_gen_parse unix.cma omake_gen_parse.cmo
107 states, 2048 transitions, table size 8834 bytes
./omake_gen_parse -o omake_ast_parse.mly omake_ast_parse.input
ocamlyacc omake_ast_parse.mly
ocamlyacc omake_ast_parse.mly
ocamldep *.ml *.mli > Makefile.dep
make[1]: `Makefile.dep' is up to date.
ocamlc -c lm_string_util.mli
ocamlc -c lm_printf.mli
ocamlc -c lm_debug.mli
ocamlc -c lm_list_util.mli
ocamlc -c lm_array_util.mli
ocamlc -c lm_map_sig.ml
ocamlc -c lm_termsize.mli
ocamlc -c lm_terminfo.mli
ocamlc -c lm_arg.mli
ocamlc -c lm_index.mli
ocamlc -c lm_thread_sig.ml
ocamlc -c lm_string_util.ml
ocamlc -c lm_hash_sig.ml
ocamlc -c lm_filename_util.mli
ocamlc -c lm_uname.mli
ocamlc -c lm_thread_pool.mli
ocamlc -c lm_unix_util.mli
ocamlc -c lm_db.mli
ocamlc -c lm_notify.mli
ocamlc -c lm_fs_case_sensitive.mli
ocamlc -c fmarshal.ml
ocamlc -c omake_wild.mli
ocamlc -c omake_shell_sys_type.ml
ocamlc -c omake_readline.mli
ocamlc -c ocaml_patch.mli
ocamlc -c omake_util.mli
ocamlc -c omake_wild.ml
ocamlc -c omake_readline.ml
ocamlc -c omake_printf.ml
cc -I"`ocamlc -where`" -c lm_heap.c
cc -I"`ocamlc -where`" -c lm_channel.c
cc -I"`ocamlc -where`" -c lm_printf.c
cc -I"`ocamlc -where`" -c lm_ctype.c
cc -I"`ocamlc -where`" -c lm_uname_ext.c
cc -I"`ocamlc -where`" -c lm_unix_cutil.c
cc -I"`ocamlc -where`" -c lm_compat_win32.c
cc -I"`ocamlc -where`" -c readline.c
cc -I"`ocamlc -where`" -c omake_shell_sys.c
cc -I"`ocamlc -where`" -c fam_win32.c
cc -I"`ocamlc -where`" -c fam_kqueue.c
cc -I"`ocamlc -where`" -c fam_inotify.c
cc -I"`ocamlc -where`" -c lm_notify.c
cc -I"`ocamlc -where`" -c lm_termsize.c
cc -I"`ocamlc -where`" -c lm_terminfo.c
cc -I"`ocamlc -where`" -c lm_fs_case_sensitive.c
ocamlc -c omake_gen_magic.ml
ocamlc -c lm_printf.ml
ocamlc -c lm_debug.ml
ocamlc -c lm_heap.ml
ocamlc -c lm_list_util.ml
ocamlc -c lm_array_util.ml
ocamlc -c lm_set_sig.ml
ocamlc -c lm_map.mli
ocamlc -c lm_termsize.ml
ocamlc -c lm_terminfo.ml
ocamlc -c lm_arg.ml
ocamlc -c lm_index.ml
ocamlc -c lm_thread_core.mli
ocamlc -c lm_thread.mli
ocamlc -c lm_string_set.mli
ocamlc -c lm_hash.mli
ocamlc -c lm_symbol.mli
ocamlc -c lm_filename_util.ml
ocamlc -c lm_uname.ml
ocamlc -c lm_thread_pool.ml
ocamlc -c lm_unix_util.ml
ocamlc -c lm_db.ml
ocamlc -c lm_notify.ml
ocamlc -c lm_fs_case_sensitive.ml
ocamlc -c ocaml_patch.ml
ocamlc -c omake_util.ml
ocamlc -c omake_print_util.mli
rm -f clib.a
ar cq clib.a lm_heap.o lm_channel.o lm_printf.o lm_ctype.o lm_uname_ext.o
lm_unix_cutil.o lm_compat_win32.o readline.o omake_shell_sys.o fam_win32.o
fam_kqueue.o fam_inotify.o lm_notify.o lm_termsize.o lm_terminfo.o
lm_fs_case_sensitive.o
/usr/bin/ranlib: file: clib.a(fam_win32.o) has no symbols
/usr/bin/ranlib: file: clib.a(fam_kqueue.o) has no symbols
/usr/bin/ranlib: file: clib.a(fam_inotify.o) has no symbols
ocamlc -c lm_set.mli
ocamlc -c lm_map.ml
ocamlc -c lm_int_set.mli
ocamlc -c lm_thread_core.ml
ocamlc -c lm_thread.ml
ocamlc -c lm_string_set.ml
ocamlc -c lm_hash.ml
ocamlc -c lm_symbol.ml
ocamlc -c lm_location.mli
ocamlc -c omake_handle_table.ml
ocamlc -c omake_ast.ml
ocamlc -c omake_print_util.ml
ocamlc -c lm_set.ml
ocamlc -c lm_int_set.ml
ocamlc -c lm_location.ml
ocamlc -c lm_position.mli
ocamlc -c lm_channel.mli
ocamlc -c lm_lexer.mli
ocamlc -c lm_parser.mli
ocamlc -c lm_glob.mli
ocamlc -c omake_marshal.ml
ocamlc -c omake_ast_print.mli
ocamlc -c omake_ast_util.mli
ocamlc -c lm_position.ml
ocamlc -c lm_channel.ml
ocamlc -c lm_lexer.ml
ocamlc -c lm_parser.ml
ocamlc -c lm_glob.ml
ocamlc -c omake_exec_id.mli
ocamlc -a -o util.cma fmarshal.cmo ocaml_patch.cmo omake_util.cmo
omake_wild.cmo omake_print_util.cmo omake_readline.cmo omake_printf.cmo
omake_marshal.cmo omake_handle_table.cmo
ocamlc -c omake_ast_util.ml
ocamlc -c omake_ast_print.ml
ocamlc -c omake_exec_id.ml
ocamlc -a -o lm.cma lm_printf.cmo lm_debug.cmo lm_heap.cmo
lm_list_util.cmo lm_array_util.cmo lm_set_sig.cmo lm_set.cmo
lm_map_sig.cmo lm_map.cmo lm_int_set.cmo lm_termsize.cmo lm_terminfo.cmo
lm_arg.cmo lm_index.cmo lm_thread_sig.cmo lm_thread_core.cmo lm_thread.cmo
lm_string_util.cmo lm_string_set.cmo lm_hash_sig.cmo lm_hash.cmo
lm_symbol.cmo lm_location.cmo lm_position.cmo lm_filename_util.cmo
lm_uname.cmo lm_thread_pool.cmo lm_channel.cmo lm_lexer.cmo lm_parser.cmo
lm_unix_util.cmo lm_glob.cmo lm_db.cmo lm_notify.cmo
lm_fs_case_sensitive.cmo
ocamlc -custom -o omake_gen_magic unix.cma lm.cma omake_gen_magic.cmo
ocamlc -a -o ast.cma omake_ast.cmo omake_ast_util.cmo
omake_ast_print.cmo
./omake_gen_magic -o omake_magic.ml --version version.txt --magic --cache-
files lm_filename_util.ml lm_hash.ml lm_location.ml lm_map.ml
lm_position.ml lm_set.ml lm_symbol.ml omake_value_type.ml omake_cache.ml
omake_cache_type.ml omake_node.ml omake_command_digest.ml --omc-files
lm_filename_util.ml lm_hash.ml lm_location.ml lm_symbol.ml lm_map.ml
lm_set.ml omake_node.ml omake_ir.ml --omo-files lm_filename_util.ml
lm_hash.ml lm_lexer.ml lm_location.ml lm_map.ml lm_parser.ml
lm_position.ml lm_set.ml lm_symbol.ml omake_value_type.ml
omake_cache_type.ml omake_ir.ml omake_node.ml omake_env.ml
ocamlc -c omake_magic.ml
ocamlc -a -o magic.cma omake_magic.cmo
ocamlc -c omake_node_sig.ml
ocamlc -c omake_symbol.ml
ocamlc -c omake_options.mli
ocamlc -c omake_state.mli
ocamlc -c omake_exn_print.mli
ocamlc -c omake_ast_lex.mli
ocamlc -c omake_shell.mli
ocamlc -c omake_install.mli
ocamlc -c omake_builtin_io_fun.mli
ocamlc -c omake_main.mli
ocamlc -c omake_options.ml
ocamlc -c omake_state.ml
ocamlc -c omake_node_type.ml
ocamlc -c omake_virtual_id.mli
ocamlc -c omake_ast_parse.mli
ocamlc -c omake_builtin_base.mli
ocamlc -c omake_builtin_arith.mli
ocamlc -c omake_builtin_file.mli
ocamlc -c omake_builtin_fun.mli
ocamlc -c omake_builtin_io.mli
ocamlc -c omake_builtin_sys.mli
ocamlc -c omake_builtin_target.mli
ocamlc -c omake_builtin_shell.mli
ocamlc -c omake_builtin_rule.mli
ocamlc -c omake_builtin_test.mli
ocamlc -c omake_builtin_object.mli
ocamlc -c omake_node.mli
ocamlc -c omake_lexer.ml
ocamlc -c omake_virtual_id.ml
ocamlc -c omake_install.ml
ocamlc -c omake_ir.ml
ocamlc -c omake_parser.ml
ocamlc -c omake_shell_type.ml
ocamlc -c omake_node.ml
ocamlc -c omake_ir_util.mli
ocamlc -c omake_var.mli
ocamlc -c omake_ir_free_vars.mli
ocamlc -c omake_ir_print.mli
ocamlc -c omake_shell_sys.mli
ocamlc -c omake_var.ml
ocamlc -c omake_ir_util.ml
ocamlc -c omake_ir_print.ml
ocamlc -c omake_ir_free_vars.ml
ocamlc -c omake_value_type.ml
ocamlc -c omake_command_type.ml
ocamlc -c omake_cache_type.ml
ocamlc -c omake_command.mli
ocamlc -c omake_value_print.mli
ocamlc -c omake_pos.mli
ocamlc -c omake_exec_type.ml
ocamlc -c omake_exec_util.mli
ocamlc -c omake_cache.mli
ocamlc -c omake_value_print.ml
ocamlc -c omake_pos.ml
ocamlc -c omake_command.ml
ocamlc -c omake_cache.ml
ocamlc -c omake_exec_print.mli
ocamlc -c omake_exec_local.mli
ocamlc -c omake_exec_notify.mli
ocamlc -c omake_shell_sys.ml
ocamlc -c omake_exec.mli
ocamlc -c omake_exec_remote.mli
ocamlc -c omake_exec_print.ml
ocamlc -c omake_exec_util.ml
ocamlc -c omake_exec_local.ml
ocamlc -c omake_exec_remote.ml
ocamlc -c omake_exec_notify.ml
ocamlc -c omake_exec.ml
ocamlc -c omake_env.mli
ocamlc -a -o ir.cma omake_options.cmo omake_symbol.cmo omake_state.cmo
omake_node_type.cmo omake_node_sig.cmo omake_node.cmo omake_virtual_id.cmo
omake_install.cmo omake_ir.cmo omake_var.cmo omake_ir_util.cmo
omake_ir_print.cmo omake_ir_free_vars.cmo omake_lexer.cmo omake_parser.cmo
omake_value_type.cmo omake_command_type.cmo omake_value_print.cmo
omake_pos.cmo omake_shell_type.cmo omake_command.cmo omake_cache_type.cmo
omake_cache.cmo
ocamlc -a -o exec.cma omake_exec_id.cmo omake_exec_type.cmo
omake_exec_print.cmo omake_exec_util.cmo omake_exec_local.cmo
omake_exec_remote.cmo omake_exec_notify.cmo omake_exec.cmo
ocamlc -c omake_value.mli
ocamlc -c omake_shell_job.mli
ocamlc -c omake_shell_completion.mli
ocamlc -c omake_ir_ast.mli
ocamlc -c omake_build_type.ml
ocamlc -c omake_rule.mli
ocamlc -c omake_env.ml
ocamlc -c omake_exn_print.ml
ocamlc -c omake_ast_parse.ml
ocamlc -c omake_ast_lex.ml
ocamlc -c omake_ir_ast.ml
ocamlc -c omake_ir_semant.mli
ocamlc -c omake_command_digest.mli
ocamlc -c omake_shell_parse.mli
ocamlc -c omake_shell_lex.mli
ocamlc -c omake_build_util.mli
ocamlc -c omake_builtin_util.mli
ocamlc -c omake_target.mli
ocamlc -c omake_build_tee.mli
ocamlc -c omake_eval.mli
ocamlc -c omake_builtin_type.ml
ocamlc -c omake_build.mli
ocamlc -c omake_ir_semant.ml
ocamlc -c omake_command_digest.ml
ocamlc -c omake_eval.ml
ocamlc -c omake_value.ml
ocamlc -c omake_shell_parse.ml
ocamlc -c omake_shell_lex.ml
ocamlc -c omake_shell_job.ml
ocamlc -c omake_shell_completion.ml
ocamlc -c omake_rule.ml
ocamlc -c omake_build_util.ml
ocamlc -c omake_builtin_util.ml
ocamlc -c omake_target.ml
ocamlc -c omake_build_tee.ml
ocamlc -c omake_builtin.mli
ocamlc -a -o env.cma omake_env.cmo omake_exn_print.cmo
omake_ast_parse.cmo omake_ast_lex.cmo omake_ir_ast.cmo omake_ir_semant.cmo
omake_command_digest.cmo
ocamlc -a -o eval.cma omake_eval.cmo omake_value.cmo
ocamlc -a -o shell.cma omake_shell_parse.cmo omake_shell_lex.cmo
omake_shell_sys_type.cmo omake_shell_sys.cmo omake_shell_job.cmo
omake_shell_completion.cmo
ocamlc -c omake_shell.ml
ocamlc -c omake_main.ml
ocamlc -c omake_builtin.ml
ocamlc -c omake_build.ml
ocamlc -c omake_builtin_base.ml
ocamlc -c omake_builtin_arith.ml
ocamlc -c omake_builtin_file.ml
ocamlc -c omake_builtin_fun.ml
ocamlc -c omake_builtin_io.ml
ocamlc -c omake_builtin_io_fun.ml
ocamlc -c omake_builtin_sys.ml
ocamlc -c omake_builtin_target.ml
ocamlc -c omake_builtin_shell.ml
ocamlc -c omake_builtin_rule.ml
ocamlc -c omake_builtin_test.ml
ocamlc -c omake_builtin_object.ml
ocamlc -a -o build.cma omake_rule.cmo omake_build_type.cmo
omake_build_util.cmo omake_builtin_type.cmo omake_builtin_util.cmo
omake_target.cmo omake_builtin.cmo omake_build_tee.cmo omake_build.cmo
ocamlc -linkall -a -o builtin.cma omake_builtin_base.cmo
omake_builtin_arith.cmo omake_builtin_file.cmo omake_builtin_fun.cmo
omake_builtin_io.cmo omake_builtin_io_fun.cmo omake_builtin_sys.cmo
omake_builtin_target.cmo omake_builtin_shell.cmo omake_builtin_rule.cmo
omake_builtin_test.cmo omake_builtin_object.cmo
ocamlc -custom -o omake -cclib clib.a unix.cma lm.cma util.cma magic.cma
ast.cma ir.cma env.cma exec.cma eval.cma shell.cma build.cma builtin.cma
omake_shell.cmo omake_main.cmo
touch .config
OMAKEFLAGS= OMAKEPATH=lib ./omake-boot --dotomake .omake --force-dotomake
-j2 main
*** omake: reading OMakefiles
--- Checking for gcc... (found /opt/local/bin/gcc)
--- Checking for g++... (found /opt/local/bin/g++)
--- Checking for ocamlfind... (found /opt/local/bin/ocamlfind)
--- Checking for ocamlc.opt... (found /opt/local/bin/ocamlc.opt)
--- Checking for ocamlopt.opt... (found /opt/local/bin/ocamlopt.opt)
--- Checking whether ocamlc understands the "z" warnings... (yes)
--- Checking for ncurses... (found)
--- Checking for readline... (found, non-GNU)
--- Checking for FAM... (using kqueue)
--- Checking for string.h... (found)
--- Checking for strings.h... (found)
--- Checking if ocamldep understands -modules... (yes)
Updating the .config file.
--- Checking for ocamlfind... (found /opt/local/bin/ocamlfind)
--- Checking for ocamlc.opt... (found /opt/local/bin/ocamlc.opt)
--- Checking for ocamlopt.opt... (found /opt/local/bin/ocamlopt.opt)
--- Checking whether ocamlc understands the "z" warnings... (yes)
--- Checking for ncurses... (found)
--- Checking for readline... (found, non-GNU)
--- Checking for FAM... (using kqueue)
--- Checking for string.h... (found)
--- Checking for strings.h... (found)
--- Checking for function snprintf... (found)
--- Checking for optimal filesystem case-sensitivity test... (Mac OS X
implementation, using getattrlist)
--- Checking if ocamldep understands -modules... (yes)
--- Checking for hevea... (FAILED - no hevea found)
--- Checking for date... (found /bin/date)
*** omake: finished reading OMakefiles (2.92 sec)
*** omake: warning: stdout is not a tty, disabling the progress bar
(use --progress to override).
*** omake: saved .omakedb
*** omake: saved .omakedb
- build src/clib lm_printf.o
+ gcc -g -O2 -Wall -Werror -Wno-unused -DREADLINE_ENABLED -DNCURSES
-DTERMH_IN_NCURSES -DFAM_ENABLED -DFAM_PSEUDO -DFAM_KQUEUE -DHAVE_STRING_H
-DHAVE_STRINGS_H -DHAVE_SNPRINTF -DDETECT_FS_CASE_SENSITIVE_GETATTRLIST
-I. -I/opt/local/lib/ocaml -I. -c -o lm_printf.o lm_printf.c
cc1: warnings being treated as errors
lm_printf.c: In function 'ml_print_string2':
lm_printf.c:193: error: attempt to free a non-heap object 'buffer'
lm_printf.c:198: error: attempt to free a non-heap object 'buffer'
lm_printf.c: In function 'ml_print_string':
lm_printf.c:145: error: attempt to free a non-heap object 'buffer'
lm_printf.c:150: error: attempt to free a non-heap object 'buffer'
*** omake: 983/1158 targets are up to date
*** omake: failed (38.98 sec, 211/211 scans, 275/386 rules, 651/1887
digests)
*** omake: targets were not rebuilt because of errors:
src/clib/lm_printf.o
make: *** [all] Error 1
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_omake/work/omake-0.9.8.5"
&& /usr/bin/make -j2 all " returned error 2
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_omake/work/omake-0.9.8.5"
&& /usr/bin/make -j2 all " returned error 2
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for omake):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
--
Ticket URL: <http://trac.macports.org/ticket/24783>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list