[MacPorts] #24813: gimp port installation fails
MacPorts
noreply at macports.org
Thu May 6 20:24:50 PDT 2010
#24813: gimp port installation fails
---------------------------------+------------------------------------------
Reporter: evanbejin@… | Owner: jwa@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: | Port: dbus-glib
---------------------------------+------------------------------------------
Changes (by jmr@…):
* owner: macports-tickets@… => jwa@…
* keywords: gimp, port, installation =>
* port: gimp => dbus-glib
Old description:
> '''After installing Xcode and X11, I tried to install the 'sudo port
> gimp' using Terminal. The completed command is as follows:-'''
>
> Last login: Fri May 7 09:26:57 on ttyp1
> Welcome to Darwin!
> sudo port install gimp; exit
> samuel-hans-ibook-g4:~ evangeline$ sudo port install gimp; exit
> Password:
> ---> Computing dependencies for gimp
> ---> Configuring curl
> ---> Building curl
> ---> Staging curl into destroot
> ---> Installing curl @7.20.0_0+ssl
> ---> Activating curl @7.20.0_0+ssl
> ---> Cleaning curl
> ---> Fetching dbus
> ---> Attempting to fetch dbus-1.2.16.tar.gz from
> http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/dbus
> ---> Verifying checksum(s) for dbus
> ---> Extracting dbus
> ---> Applying patches to dbus
> ---> Configuring dbus
> ---> Building dbus
> ---> Staging dbus into destroot
> ---> Installing dbus @1.2.16_1
> ---> Activating dbus @1.2.16_1
> #################################################################################################
> # Startup items have been generated that will aid in
> # starting dbus with launchd. They are disabled
> # by default. Execute the following command to start them,
> # and to cause it to launch at startup:
> #
> # sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-
> system.plist
> # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-
> session.plist
> ##################################################################################################
> ---> Cleaning dbus
> ---> Fetching glib2
> ---> Attempting to fetch glib-2.22.5.tar.bz2 from
> http://mirror.internode.on.net/pub/gnome/sources/glib/2.22/
> ---> Verifying checksum(s) for glib2
> ---> Extracting glib2
> ---> Applying patches to glib2
> ---> Configuring glib2
> ---> Building glib2
> ---> Staging glib2 into destroot
> ---> Installing glib2 @2.22.5_0+darwin
> ---> Activating glib2 @2.22.5_0+darwin
> ---> Cleaning glib2
> ---> Fetching dbus-glib
> ---> Attempting to fetch dbus-glib-0.86.tar.gz from
> http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/dbus-
> glib
> ---> Verifying checksum(s) for dbus-glib
> ---> Extracting dbus-glib
> ---> Configuring dbus-glib
> ---> Building dbus-glib
> ---> Staging dbus-glib into destroot
> Error: Target org.macports.destroot returned: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_devel_dbus-glib/work/dbus-glib-0.86" && /usr/bin/make
> install
> DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_devel_dbus-glib/work/destroot " returned error 2
> Command output: fi; \
> ! which gtkdoc-rebase >/dev/null 2>&1 || \
> gtkdoc-rebase --relative --dest-
> dir=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_devel_dbus-glib/work/destroot --html-dir=${installdir}
> ; \
> fi
> -- Installing ./html/ch01.html
> -- Installing ./html/ch02.html
> -- Installing ./html/ch03.html
> -- Installing ./html/dbus-binding-tool.html
> -- Installing ./html/dbus-glib-DBus-GLib-low-level.html
> -- Installing ./html/dbus-glib-DBus-GObject-related-functions.html
> -- Installing ./html/dbus-glib-DBusGConnection.html
> -- Installing ./html/dbus-glib-DBusGError.html
> -- Installing ./html/dbus-glib-DBusGMessage.html
> -- Installing ./html/dbus-glib-DBusGMethod.html
> -- Installing ./html/dbus-glib-DBusGProxy.html
> -- Installing ./html/dbus-glib-Specializable-GType-System.html
> -- Installing ./html/dbus-glib.devhelp
> -- Installing ./html/dbus-glib.devhelp2
> -- Installing ./html/home.png
> -- Installing ./html/index.html
> -- Installing ./html/index.sgml
> -- Installing ./html/left.png
> -- Installing ./html/right.png
> -- Installing ./html/style.css
> -- Installing ./html/up.png
> /bin/sh: line 1: gtkdoc-rebase: command not found
> make[3]: *** [install-data-local] Error 127
> make[2]: *** [install-am] Error 2
> make[1]: *** [install-recursive] Error 1
> make: *** [install-recursive] Error 1
>
> Error: The following dependencies failed to build: gimp-app gimp2 dbus-
> glib gegl babl librsvg cairo fontconfig freetype libpixman libpng xrender
> xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau
> xorg-xproto xorg-libXdmcp xorg-util-macros xorg-xcmiscproto xorg-
> xextproto xorg-xf86bigfontproto xorg-xtrans xorg-renderproto gtk2 atk
> gtk-doc docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-
> xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl
> gnome-doc-utils iso-codes libxslt libxml2 p5-xml-parser py26-libxml2
> python26 bzip2 db46 gdbm readline sqlite3 tk Xft2 tcl xorg-libXScrnSaver
> xorg-libXext xorg-scrnsaverproto rarian getopt intltool gnome-common p5
> -getopt-long p5-pathtools p5-scalar-list-utils jasper jpeg pango shared-
> mime-info tiff xorg-libXcomposite xorg-compositeproto xorg-libXfixes
> xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-
> libXi xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto
> libart_lgpl libcroco libgsf gconf orbit2 libidl policykit gnome-vfs
> desktop-file-utils popt gnome-mime-data libbonobo w3m boehmgc ffmpeg XviD
> dirac cppunit faac mp4v2 faad2 gmake lame libogg libsdl libtheora
> libvorbis schroedinger orc liboil x264 graphviz gd2 xpm xorg-libXt xorg-
> libsm xorg-libice ghostscript libpaper urw-fonts xorg-libXaw groff xorg-
> libXmu libopenraw boost boost-jam libspiro lua openexr ilmbase gsed lcms
> libexif libgnomeui gnome-icon-theme hicolor-icon-theme icon-naming-utils
> p5-xml-simple p5-xml-namespacesupport p5-xml-sax gnome-keyring libgcrypt
> libgpg-error libtasn1 libbonoboui libglade2 libgnome esound audiofile
> libgnomecanvas libmng libwmf poppler openjpeg poppler-data py25-gtk
> py25-cairo py25-numpy atlas gcc43 gmp mpfr gzip texinfo lzmautils fftw-3
> py25-nose py25-distribute python25 py25-gobject gimp-jp2 gimp-lqr-plugin
> liblqr gtk-nodoka-engine coreutils gutenprint icns-gimp macclipboard-gimp
> macfile-gimp ufraw cfitsio dcraw exiv2 gtkimageview xsane sane-backends
> libusb-compat libusb
> Error: Status 1 encountered during processing.
> Before reporting a bug, first run the command again with the -d flag to
> get complete output.
> logout
> [Process completed]
>
> '''Later, to verify the install, I did a 'port installed' command at
> Terminal. The response I received is as follows:-'''
>
> Last login: Fri May 7 09:27:05 on ttyp2
> port installed; exit
> Welcome to Darwin!
> samuel-hans-ibook-g4:~ evangeline$ port installed; exit
> The following ports are currently installed:
> aalib @1.4rc5_4 (active)
> autoconf @2.65_1 (active)
> automake @1.11.1_0 (active)
> curl @7.20.0_0+ssl (active)
> curl-ca-bundle @7.20.0_3 (active)
> dbus @1.2.16_1 (active)
> expat @2.0.1_0 (active)
> gettext @0.17_4 (active)
> glib2 @2.22.5_0+darwin (active)
> gperf @3.0.4_0 (active)
> help2man @1.37.1_1 (active)
> libiconv @1.13.1_0 (active)
> libidn @1.18_0 (active)
> libtool @2.2.6b_1+darwin (active)
> m4 @1.4.14_0 (active)
> ncurses @5.7_0 (active)
> ncursesw @5.7_0 (active)
> openssl @0.9.8n_0+darwin (active)
> p5-locale-gettext @1.05_2 (active)
> perl5 @5.8.9_0 (active)
> perl5.8 @5.8.9_3 (active)
> pkgconfig @0.23_1 (active)
> zlib @1.2.5_0 (active)
> logout
> [Process completed]
>
> '''The gimp port was not listed. What do I do? I'm using a Tiger 10.4.11
>
> Sincerely,
> Evangeline'''
New description:
'''After installing Xcode and X11, I tried to install the 'sudo port gimp'
using Terminal. The completed command is as follows:-'''
{{{
Last login: Fri May 7 09:26:57 on ttyp1
Welcome to Darwin!
sudo port install gimp; exit
samuel-hans-ibook-g4:~ evangeline$ sudo port install gimp; exit
Password:
---> Computing dependencies for gimp
---> Configuring curl
---> Building curl
---> Staging curl into destroot
---> Installing curl @7.20.0_0+ssl
---> Activating curl @7.20.0_0+ssl
---> Cleaning curl
---> Fetching dbus
---> Attempting to fetch dbus-1.2.16.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/dbus
---> Verifying checksum(s) for dbus
---> Extracting dbus
---> Applying patches to dbus
---> Configuring dbus
---> Building dbus
---> Staging dbus into destroot
---> Installing dbus @1.2.16_1
---> Activating dbus @1.2.16_1
#################################################################################################
# Startup items have been generated that will aid in
# starting dbus with launchd. They are disabled
# by default. Execute the following command to start them,
# and to cause it to launch at startup:
#
# sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-
system.plist
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-
session.plist
##################################################################################################
---> Cleaning dbus
---> Fetching glib2
---> Attempting to fetch glib-2.22.5.tar.bz2 from
http://mirror.internode.on.net/pub/gnome/sources/glib/2.22/
---> Verifying checksum(s) for glib2
---> Extracting glib2
---> Applying patches to glib2
---> Configuring glib2
---> Building glib2
---> Staging glib2 into destroot
---> Installing glib2 @2.22.5_0+darwin
---> Activating glib2 @2.22.5_0+darwin
---> Cleaning glib2
---> Fetching dbus-glib
---> Attempting to fetch dbus-glib-0.86.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/dbus-glib
---> Verifying checksum(s) for dbus-glib
---> Extracting dbus-glib
---> Configuring dbus-glib
---> Building dbus-glib
---> Staging dbus-glib into destroot
Error: Target org.macports.destroot returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86" && /usr/bin/make
install
DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_devel_dbus-glib/work/destroot " returned error 2
Command output: fi; \
! which gtkdoc-rebase >/dev/null 2>&1 || \
gtkdoc-rebase --relative --dest-
dir=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_devel_dbus-glib/work/destroot --html-dir=${installdir}
; \
fi
-- Installing ./html/ch01.html
-- Installing ./html/ch02.html
-- Installing ./html/ch03.html
-- Installing ./html/dbus-binding-tool.html
-- Installing ./html/dbus-glib-DBus-GLib-low-level.html
-- Installing ./html/dbus-glib-DBus-GObject-related-functions.html
-- Installing ./html/dbus-glib-DBusGConnection.html
-- Installing ./html/dbus-glib-DBusGError.html
-- Installing ./html/dbus-glib-DBusGMessage.html
-- Installing ./html/dbus-glib-DBusGMethod.html
-- Installing ./html/dbus-glib-DBusGProxy.html
-- Installing ./html/dbus-glib-Specializable-GType-System.html
-- Installing ./html/dbus-glib.devhelp
-- Installing ./html/dbus-glib.devhelp2
-- Installing ./html/home.png
-- Installing ./html/index.html
-- Installing ./html/index.sgml
-- Installing ./html/left.png
-- Installing ./html/right.png
-- Installing ./html/style.css
-- Installing ./html/up.png
/bin/sh: line 1: gtkdoc-rebase: command not found
make[3]: *** [install-data-local] Error 127
make[2]: *** [install-am] Error 2
make[1]: *** [install-recursive] Error 1
make: *** [install-recursive] Error 1
Error: The following dependencies failed to build: gimp-app gimp2 dbus-
glib gegl babl librsvg cairo fontconfig freetype libpixman libpng xrender
xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau
xorg-xproto xorg-libXdmcp xorg-util-macros xorg-xcmiscproto xorg-xextproto
xorg-xf86bigfontproto xorg-xtrans xorg-renderproto gtk2 atk gtk-doc
docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3
docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl gnome-doc-
utils iso-codes libxslt libxml2 p5-xml-parser py26-libxml2 python26 bzip2
db46 gdbm readline sqlite3 tk Xft2 tcl xorg-libXScrnSaver xorg-libXext
xorg-scrnsaverproto rarian getopt intltool gnome-common p5-getopt-long
p5-pathtools p5-scalar-list-utils jasper jpeg pango shared-mime-info tiff
xorg-libXcomposite xorg-compositeproto xorg-libXfixes xorg-fixesproto
xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-
libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto libart_lgpl
libcroco libgsf gconf orbit2 libidl policykit gnome-vfs desktop-file-utils
popt gnome-mime-data libbonobo w3m boehmgc ffmpeg XviD dirac cppunit faac
mp4v2 faad2 gmake lame libogg libsdl libtheora libvorbis schroedinger orc
liboil x264 graphviz gd2 xpm xorg-libXt xorg-libsm xorg-libice ghostscript
libpaper urw-fonts xorg-libXaw groff xorg-libXmu libopenraw boost boost-
jam libspiro lua openexr ilmbase gsed lcms libexif libgnomeui gnome-icon-
theme hicolor-icon-theme icon-naming-utils p5-xml-simple p5-xml-
namespacesupport p5-xml-sax gnome-keyring libgcrypt libgpg-error libtasn1
libbonoboui libglade2 libgnome esound audiofile libgnomecanvas libmng
libwmf poppler openjpeg poppler-data py25-gtk py25-cairo py25-numpy atlas
gcc43 gmp mpfr gzip texinfo lzmautils fftw-3 py25-nose py25-distribute
python25 py25-gobject gimp-jp2 gimp-lqr-plugin liblqr gtk-nodoka-engine
coreutils gutenprint icns-gimp macclipboard-gimp macfile-gimp ufraw
cfitsio dcraw exiv2 gtkimageview xsane sane-backends libusb-compat libusb
Error: Status 1 encountered during processing.
Before reporting a bug, first run the command again with the -d flag to
get complete output.
logout
[Process completed]
}}}
'''Later, to verify the install, I did a 'port installed' command at
Terminal. The response I received is as follows:-'''
{{{
Last login: Fri May 7 09:27:05 on ttyp2
port installed; exit
Welcome to Darwin!
samuel-hans-ibook-g4:~ evangeline$ port installed; exit
The following ports are currently installed:
aalib @1.4rc5_4 (active)
autoconf @2.65_1 (active)
automake @1.11.1_0 (active)
curl @7.20.0_0+ssl (active)
curl-ca-bundle @7.20.0_3 (active)
dbus @1.2.16_1 (active)
expat @2.0.1_0 (active)
gettext @0.17_4 (active)
glib2 @2.22.5_0+darwin (active)
gperf @3.0.4_0 (active)
help2man @1.37.1_1 (active)
libiconv @1.13.1_0 (active)
libidn @1.18_0 (active)
libtool @2.2.6b_1+darwin (active)
m4 @1.4.14_0 (active)
ncurses @5.7_0 (active)
ncursesw @5.7_0 (active)
openssl @0.9.8n_0+darwin (active)
p5-locale-gettext @1.05_2 (active)
perl5 @5.8.9_0 (active)
perl5.8 @5.8.9_3 (active)
pkgconfig @0.23_1 (active)
zlib @1.2.5_0 (active)
logout
[Process completed]
}}}
'''The gimp port was not listed. What do I do? I'm using a Tiger 10.4.11
Sincerely,
Evangeline'''
--
Comment:
Please remember to preview and use WikiFormatting and cc the maintainer.
--
Ticket URL: <http://trac.macports.org/ticket/24813#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list