[MacPorts] #24954: summary alpine build failure

[MacPorts]

#24954: summary alpine build failure
------------------------------+---------------------------------------------
 Reporter:  jschnide@…        |       Owner:  todmorrison@…        
     Type:  defect            |      Status:  new                  
 Priority:  Normal            |   Milestone:                       
Component:  ports             |     Version:  1.7.1                
 Keywords:                    |        Port:  alpine               
------------------------------+---------------------------------------------

Comment(by jschnide@…):

 Replying to [comment:1 macsforever2000@…]:
 > Why did you install an old version of Macports? Where did you get that
 from? You should update to version 1.8.2. Please run the following:
 >
 > {{{
 > sudo port selfupdate
 > sudo port upgrade outdated
 > sudo port clean alpine
 > sudo port install alpine
 > }}}

 Per the ticket entry, I did run port selfupdate after the install so I was
 at 1.8.2 before the installs. As noted, I also did the upgrade outdated
 and the clean. I re-ran the commands you suggested. And the result:

 {{{
 # port install alpine
 --->  Computing dependencies for alpine
 --->  Fetching alpine
 --->  Verifying checksum(s) for alpine
 --->  Extracting alpine
 --->  Configuring alpine
 --->  Building alpine
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_mail_alpine/work/alpine-2.00"
 && /usr/bin/make all C_CLIENT_SPECIALS="GSSLIB=//opt/local/lib
 SSLDIR=/opt/local" " returned error 2
 Command output: mv -f .deps/signal.Tpo .deps/signal.Po
 /usr/bin/gcc-4.0 -std=gnu99 -DHAVE_CONFIG_H   -I../include -I../include
 -DLOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include
 -I/opt/local/include -I/opt/local/include -g -D_THREAD_SAFE  -Dbsd -O2
 -arch ppc -MT status.o -MD -MP -MF .deps/status.Tpo -c -o status.o
 status.c
 mv -f .deps/status.Tpo .deps/status.Po
 /usr/bin/gcc-4.0 -std=gnu99 -DHAVE_CONFIG_H   -I../include -I../include
 -DLOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include
 -I/opt/local/include -I/opt/local/include -g -D_THREAD_SAFE  -Dbsd -O2
 -arch ppc -MT takeaddr.o -MD -MP -MF .deps/takeaddr.Tpo -c -o takeaddr.o
 takeaddr.c
 mv -f .deps/takeaddr.Tpo .deps/takeaddr.Po
 /usr/bin/gcc-4.0 -std=gnu99 -DHAVE_CONFIG_H   -I../include -I../include
 -DLOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include
 -I/opt/local/include -I/opt/local/include -g -D_THREAD_SAFE  -Dbsd -O2
 -arch ppc -MT titlebar.o -MD -MP -MF .deps/titlebar.Tpo -c -o titlebar.o
 titlebar.c
 mv -f .deps/titlebar.Tpo .deps/titlebar.Po
 /usr/bin/gcc-4.0 -std=gnu99 -DHAVE_CONFIG_H   -I../include -I../include
 -DLOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include
 -I/opt/local/include -I/opt/local/include -g -D_THREAD_SAFE  -Dbsd -O2
 -arch ppc -MT smime.o -MD -MP -MF .deps/smime.Tpo -c -o smime.o smime.c
 mv -f .deps/smime.Tpo .deps/smime.Po
 /usr/bin/gcc-4.0 -std=gnu99 -DHAVE_CONFIG_H   -I../include -I../include
 -DLOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include
 -I/opt/local/include -I/opt/local/include -g -D_THREAD_SAFE  -Dbsd -O2
 -arch ppc -MT date.o -MD -MP -MF .deps/date.Tpo -c -o date.o date.c
 mv -f .deps/date.Tpo .deps/date.Po
 /bin/sh ../libtool --tag=CC   --mode=link /usr/bin/gcc-4.0 -std=gnu99 -g
 -D_THREAD_SAFE  -Dbsd -O2 -arch ppc `cat ../c-client/LDFLAGS`
 -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -o
 alpine addrbook.o adrbkcmd.o after.o alpine.o arg.o busy.o colorconf.o
 confscroll.o context.o dispfilt.o flagmaint.o folder.o help.o imap.o
 init.o kblock.o keymenu.o ldapconf.o listsel.o mailcmd.o mailindx.o
 mailpart.o mailview.o newuser.o pattern.o pipe.o print.o radio.o remote.o
 reply.o roleconf.o send.o setup.o signal.o status.o takeaddr.o titlebar.o
 smime.o date.o ../pico/libpico.a ../pico/osdep/libpicoosd.a
 ../pith/libpith.a ../pith/osdep/libpithosd.a ../pith/charconv/libpithcc.a
 osdep/libpineosd.a ../c-client/c-client.a -lintl -liconv -lc
 -Wl,-framework -Wl,CoreFoundation -lgssapi_krb5 -lssl -lldap  -lncurses
 -llber -lssl -framework Carbon -framework ApplicationServices -framework
 Security
 mkdir .libs
 /usr/bin/gcc-4.0 -std=gnu99 -g -D_THREAD_SAFE -Dbsd -O2 -arch ppc -o
 alpine addrbook.o adrbkcmd.o after.o alpine.o arg.o busy.o colorconf.o
 confscroll.o context.o dispfilt.o flagmaint.o folder.o help.o imap.o
 init.o kblock.o keymenu.o ldapconf.o listsel.o mailcmd.o mailindx.o
 mailpart.o mailview.o newuser.o pattern.o pipe.o print.o radio.o remote.o
 reply.o roleconf.o send.o setup.o signal.o status.o takeaddr.o titlebar.o
 smime.o date.o -Wl,-framework -Wl,CoreFoundation -framework Carbon
 -framework ApplicationServices -framework Security  -L//opt/local/lib
 -lkrb5 -lcom_err -L/usr/lib -L/opt/local/lib ../pico/libpico.a
 ../pico/osdep/libpicoosd.a ../pith/libpith.a ../pith/osdep/libpithosd.a
 ../pith/charconv/libpithcc.a osdep/libpineosd.a ../c-client/c-client.a
 /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -lc
 -lgssapi_krb5 /opt/local/lib/libldap.dylib -L/opt/local/lib/db46
 /opt/local/lib/libsasl2.dylib -ldl -lresolv -lpam -lcrypto -lncurses
 /opt/local/lib/liblber.dylib -lssl
 /usr/bin/gcc-4.0 -std=gnu99 -DHAVE_CONFIG_H   -I../include -I../include
 -DLOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include
 -I/opt/local/include -I/opt/local/include -g -D_THREAD_SAFE  -Dbsd -O2
 -arch ppc -MT rpdump.o -MD -MP -MF .deps/rpdump.Tpo -c -o rpdump.o
 rpdump.c
 mv -f .deps/rpdump.Tpo .deps/rpdump.Po
 /bin/sh ../libtool --tag=CC   --mode=link /usr/bin/gcc-4.0 -std=gnu99 -g
 -D_THREAD_SAFE  -Dbsd -O2 -arch ppc `cat ../c-client/LDFLAGS`
 -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -o
 rpdump rpdump.o ../pico/libpico.a ../pico/osdep/libpicoosd.a
 ../pith/libpith.a ../pith/osdep/libpithosd.a ../pith/charconv/libpithcc.a
 osdep/libpineosd.a ../c-client/c-client.a -lgssapi_krb5 -lssl -lldap
 -lncurses -llber -lssl -framework Carbon -framework ApplicationServices
 -framework Security
 /usr/bin/gcc-4.0 -std=gnu99 -g -D_THREAD_SAFE -Dbsd -O2 -arch ppc -o
 rpdump rpdump.o -framework Carbon -framework ApplicationServices
 -framework Security  -L//opt/local/lib -lkrb5 -lcom_err -L/usr/lib
 -L/opt/local/lib ../pico/libpico.a ../pico/osdep/libpicoosd.a
 ../pith/libpith.a ../pith/osdep/libpithosd.a ../pith/charconv/libpithcc.a
 osdep/libpineosd.a ../c-client/c-client.a -lgssapi_krb5
 /opt/local/lib/libldap.dylib -L/opt/local/lib/db46
 /opt/local/lib/libsasl2.dylib -ldl -lresolv -lpam -lcrypto -lncurses
 /opt/local/lib/liblber.dylib -lssl
 Undefined symbols:
   "_libintl_setlocale", referenced from:
       _set_collation in libpithosd.a(collate.o)
       _set_collation in libpithosd.a(collate.o)
       _set_collation in libpithosd.a(collate.o)
 ld: symbol(s) not found
 collect2: ld returned 1 exit status
 make[4]: *** [rpdump] Error 1
 make[3]: *** [all-recursive] Error 1
 make[2]: *** [all] Error 2
 make[1]: *** [all-recursive] Error 1
 make: *** [all] Error 2

 Error: Status 1 encountered during processing.
 Before reporting a bug, first run the command again with the -d flag to
 get complete output.

 }}}

 I will be attaching the output of port -d install alpine.

 Please let me know if I can provide further information.

 Thanks
 Joe

-- 
Ticket URL: <http://trac.macports.org/ticket/24954#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS