[MacPorts] #25044: arj port does not install
MacPorts
noreply at macports.org
Wed May 26 18:36:23 PDT 2010
#25044: arj port does not install
-----------------------------------+----------------------------------------
Reporter: darreng@… | Owner: snc@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: | Port: arj
-----------------------------------+----------------------------------------
Changes (by jmr@…):
* keywords: fsailure to build or install =>
* owner: macports-tickets@… => snc@…
Old description:
> sudo port -v install arj does not work.
>
> Forcing -b or -s makes no difference.
>
> Ran with -d and output is below:
>
> {{{{
>
> sudo port -d install arj
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/arj
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/arj
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port arj.
> DEBUG: Requested variant i386 is not provided by port arj.
> DEBUG: Requested variant macosx is not provided by port arj.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libtool 2.2.6b_1 exists in the ports tree
> DEBUG: libtool 2.2.6b_1 +darwin is the latest installed
> DEBUG: libtool 2.2.6b_1 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant i386 is not provided by port libtool.
> DEBUG: Requested variant macosx is not provided by port libtool.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: automake 1.11.1_0 exists in the ports tree
> DEBUG: automake 1.11.1_0 is the latest installed
> DEBUG: automake 1.11.1_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port automake.
> DEBUG: Requested variant i386 is not provided by port automake.
> DEBUG: Requested variant macosx is not provided by port automake.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: autoconf 2.65_1 exists in the ports tree
> DEBUG: autoconf 2.65_1 is the latest installed
> DEBUG: autoconf 2.65_1 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port autoconf.
> DEBUG: Requested variant i386 is not provided by port autoconf.
> DEBUG: Requested variant macosx is not provided by port autoconf.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5 5.8.9_0 exists in the ports tree
> DEBUG: perl5 5.8.9_0 is the latest installed
> DEBUG: perl5 5.8.9_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: not using configure, so not adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port perl5.
> DEBUG: Requested variant i386 is not provided by port perl5.
> DEBUG: Requested variant macosx is not provided by port perl5.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5.8 5.8.9_3 exists in the ports tree
> DEBUG: perl5.8 5.8.9_3 is the latest installed
> DEBUG: perl5.8 5.8.9_3 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port perl5.8.
> DEBUG: Requested variant i386 is not provided by port perl5.8.
> DEBUG: Requested variant macosx is not provided by port perl5.8.
> DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
> DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: m4 1.4.14_0 exists in the ports tree
> DEBUG: m4 1.4.14_0 is the latest installed
> DEBUG: m4 1.4.14_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port m4.
> DEBUG: Requested variant i386 is not provided by port m4.
> DEBUG: Requested variant macosx is not provided by port m4.
> DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: help2man 1.37.1_1 exists in the ports tree
> DEBUG: help2man 1.37.1_1 is the latest installed
> DEBUG: help2man 1.37.1_1 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port help2man.
> DEBUG: Requested variant i386 is not provided by port help2man.
> DEBUG: Requested variant macosx is not provided by port help2man.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
> DEBUG: p5-locale-gettext 1.05_2 is the latest installed
> DEBUG: p5-locale-gettext 1.05_2 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port p5-locale-
> gettext.
> DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
> DEBUG: Requested variant macosx is not provided by port p5-locale-
> gettext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.17_4 exists in the ports tree
> DEBUG: gettext 0.17_4 is the latest installed
> DEBUG: gettext 0.17_4 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gettext.
> DEBUG: Requested variant i386 is not provided by port gettext.
> DEBUG: Requested variant macosx is not provided by port gettext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.13.1_0 exists in the ports tree
> DEBUG: libiconv 1.13.1_0 is the latest installed
> DEBUG: libiconv 1.13.1_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libiconv.
> DEBUG: Requested variant i386 is not provided by port libiconv.
> DEBUG: Requested variant macosx is not provided by port libiconv.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gperf 3.0.4_0 exists in the ports tree
> DEBUG: gperf 3.0.4_0 is the latest installed
> DEBUG: gperf 3.0.4_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gperf.
> DEBUG: Requested variant i386 is not provided by port gperf.
> DEBUG: Requested variant macosx is not provided by port gperf.
> DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
> DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.7_0 exists in the ports tree
> DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
> DEBUG: ncurses 5.7_0 +darwin_10 is active
> DEBUG: Merging existing variants darwin_10 into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncurses.
> DEBUG: Requested variant i386 is not provided by port ncurses.
> DEBUG: Requested variant macosx is not provided by port ncurses.
> DEBUG: Executing variant darwin_10 provides darwin_10
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncursesw 5.7_0 exists in the ports tree
> DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
> DEBUG: ncursesw 5.7_0 +darwin_10 is active
> DEBUG: Merging existing variants darwin_10 into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncursesw.
> DEBUG: Requested variant i386 is not provided by port ncursesw.
> DEBUG: Requested variant macosx is not provided by port ncursesw.
> DEBUG: Executing variant darwin_10 provides darwin_10
> DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_0 exists in the ports tree
> DEBUG: expat 2.0.1_0 is the latest installed
> DEBUG: expat 2.0.1_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port expat.
> DEBUG: Requested variant i386 is not provided by port expat.
> DEBUG: Requested variant macosx is not provided by port expat.
> DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
> DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
> 1.05_2
> DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
> DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
> DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
> DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1
> ---> Computing dependencies for arj
> DEBUG: Searching for dependency: libtool
> DEBUG: Found Dependency: receipt exists for libtool
> DEBUG: Searching for dependency: autoconf
> DEBUG: Found Dependency: receipt exists for autoconf
> DEBUG: Searching for dependency: automake
> DEBUG: Found Dependency: receipt exists for automake
> DEBUG: Searching for dependency: libtool
> DEBUG: Found Dependency: receipt exists for libtool
> DEBUG: Executing org.macports.main (arj)
> DEBUG: Skipping completed org.macports.fetch (arj)
> DEBUG: Skipping completed org.macports.checksum (arj)
> DEBUG: Skipping completed org.macports.extract (arj)
> DEBUG: Skipping completed org.macports.patch (arj)
> ---> Configuring arj
> DEBUG: Using compiler 'Mac OS X gcc 4.2'
> DEBUG: Executing org.macports.configure (arj)
> DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
> DEBUG: Assembled command: 'cd "gnu" && autoconf'
> sh: line 0: cd: gnu: No such file or directory
> Error: Target org.macports.configure returned: autoconf failure: shell
> command " cd "gnu" && autoconf " returned error 1
> DEBUG: Backtrace: autoconf failure: shell command " cd "gnu" && autoconf
> " returned error 1
> while executing
> "$procedure $targetname"
> Warning: the following items did not execute (for arj):
> org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
>
>
> }}}}
New description:
sudo port -v install arj does not work.
Forcing -b or -s makes no difference.
Ran with -d and output is below:
{{{
sudo port -d install arj
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/arj
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/arj
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port arj.
DEBUG: Requested variant i386 is not provided by port arj.
DEBUG: Requested variant macosx is not provided by port arj.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6b_1 exists in the ports tree
DEBUG: libtool 2.2.6b_1 +darwin is the latest installed
DEBUG: libtool 2.2.6b_1 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11.1_0 exists in the ports tree
DEBUG: automake 1.11.1_0 is the latest installed
DEBUG: automake 1.11.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_1 exists in the ports tree
DEBUG: autoconf 2.65_1 is the latest installed
DEBUG: autoconf 2.65_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0 is the latest installed
DEBUG: perl5 5.8.9_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 is the latest installed
DEBUG: perl5.8 5.8.9_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.14_0 exists in the ports tree
DEBUG: m4 1.4.14_0 is the latest installed
DEBUG: m4 1.4.14_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1 is the latest installed
DEBUG: help2man 1.37.1_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_2 is the latest installed
DEBUG: p5-locale-gettext 1.05_2 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 is the latest installed
DEBUG: gettext 0.17_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
1.05_2
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1
---> Computing dependencies for arj
DEBUG: Searching for dependency: libtool
DEBUG: Found Dependency: receipt exists for libtool
DEBUG: Searching for dependency: autoconf
DEBUG: Found Dependency: receipt exists for autoconf
DEBUG: Searching for dependency: automake
DEBUG: Found Dependency: receipt exists for automake
DEBUG: Searching for dependency: libtool
DEBUG: Found Dependency: receipt exists for libtool
DEBUG: Executing org.macports.main (arj)
DEBUG: Skipping completed org.macports.fetch (arj)
DEBUG: Skipping completed org.macports.checksum (arj)
DEBUG: Skipping completed org.macports.extract (arj)
DEBUG: Skipping completed org.macports.patch (arj)
---> Configuring arj
DEBUG: Using compiler 'Mac OS X gcc 4.2'
DEBUG: Executing org.macports.configure (arj)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "gnu" && autoconf'
sh: line 0: cd: gnu: No such file or directory
Error: Target org.macports.configure returned: autoconf failure: shell
command " cd "gnu" && autoconf " returned error 1
DEBUG: Backtrace: autoconf failure: shell command " cd "gnu" && autoconf "
returned error 1
while executing
"$procedure $targetname"
Warning: the following items did not execute (for arj):
org.macports.activate org.macports.configure org.macports.build
org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
--
Comment:
Please remember to preview, and to cc the maintainer.
--
Ticket URL: <http://trac.macports.org/ticket/25044#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list