[MacPorts] #25051: arm-none-linux-gnueabi-gcc fails

MacPorts noreply at macports.org
Thu May 27 04:55:46 PDT 2010 

#25051: arm-none-linux-gnueabi-gcc fails
--------------------------------+-------------------------------------------
 Reporter:  ncharles@…          |       Owner:  macports-tickets@…                   
     Type:  defect              |      Status:  new                                  
 Priority:  Normal              |   Milestone:                                       
Component:  ports               |     Version:  1.8.2                                
 Keywords:                      |        Port:                                       
--------------------------------+-------------------------------------------
 I'm trying to install arm-none-linux-gnueabi-gcc and it fails.  I do have
 makeinfo installed through and it's a warning so I'm not sure if that's a
 spurious message or not.


 [nathan at berlin:~]$ sudo port -d install arm-none-linux-gnueabi-gcc
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-gcc
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-gcc
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port arm-none-linux-
 gnueabi-gcc.
 DEBUG: Requested variant i386 is not provided by port arm-none-linux-
 gnueabi-gcc.
 DEBUG: Requested variant macosx is not provided by port arm-none-linux-
 gnueabi-gcc.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-runtime
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: arm-none-linux-gnueabi-runtime cs2005q3.2_0 exists in the ports
 tree
 DEBUG: arm-none-linux-gnueabi-runtime cs2005q3.2_0  is the latest
 installed
 DEBUG: arm-none-linux-gnueabi-runtime cs2005q3.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-runtime
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port arm-none-linux-
 gnueabi-runtime.
 DEBUG: Requested variant i386 is not provided by port arm-none-linux-
 gnueabi-runtime.
 DEBUG: Requested variant macosx is not provided by port arm-none-linux-
 gnueabi-runtime.
 DEBUG: No need to upgrade! arm-none-linux-gnueabi-runtime cs2005q3.2_0 >=
 arm-none-linux-gnueabi-runtime cs2005q3.2_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.18_0 exists in the ports tree
 DEBUG: gettext 0.18_0  is the latest installed
 DEBUG: gettext 0.18_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13.1_0 exists in the ports tree
 DEBUG: libiconv 1.13.1_0  is the latest installed
 DEBUG: libiconv 1.13.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10+universal is active
 DEBUG: Merging existing variants darwin_10 universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10+universal is active
 DEBUG: Merging existing variants darwin_10 universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.18_0 >= gettext 0.18_0
 --->  Computing dependencies for arm-none-linux-gnueabi-gcc
 DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
 DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-
 gnueabi-binutils
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-binutils
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-binutils
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port arm-none-linux-
 gnueabi-binutils.
 DEBUG: Requested variant i386 is not provided by port arm-none-linux-
 gnueabi-binutils.
 DEBUG: Requested variant macosx is not provided by port arm-none-linux-
 gnueabi-binutils.
 DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
 DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-
 gnueabi-binutils
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-binutils
 DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
 DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-
 gnueabi-binutils
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-binutils
 DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
 DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-
 gnueabi-binutils
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-binutils
 DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils
 DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-
 gnueabi-binutils
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross
 /arm-none-linux-gnueabi-binutils
 DEBUG: Searching for dependency: arm-none-linux-gnueabi-runtime
 DEBUG: Found Dependency: receipt exists for arm-none-linux-gnueabi-runtime
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Executing org.macports.main (arm-none-linux-gnueabi-binutils)
 DEBUG: Skipping completed org.macports.fetch (arm-none-linux-gnueabi-
 binutils)
 DEBUG: Skipping completed org.macports.checksum (arm-none-linux-gnueabi-
 binutils)
 DEBUG: setting option extract.cmd to /usr/bin/bzip2
 DEBUG: Skipping completed org.macports.extract (arm-none-linux-gnueabi-
 binutils)
 DEBUG: Skipping completed org.macports.patch (arm-none-linux-gnueabi-
 binutils)
 DEBUG: Skipping completed org.macports.configure (arm-none-linux-gnueabi-
 binutils)
 --->  Building arm-none-linux-gnueabi-binutils
 DEBUG: Executing org.macports.build (arm-none-linux-gnueabi-binutils)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/build" &&
 /usr/bin/make -j2 all'
 make[1]: Nothing to be done for `all-target'.
 make[2]: Nothing to be done for `all'.
 make[3]: Nothing to be done for `all'.
 Making info in doc
 restore=: && backupdir=".am$$" && \
         am__cwd=`pwd` && cd
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc && \
         rm -rf $backupdir && mkdir $backupdir && \
         for f in
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-
 bfd.info-[0-9]
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-
 bfd.info-[0-9][0-9]
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.i[0-9]
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-
 bfd.i[0-9][0-9]; do \
           if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
         done; \
         cd "$am__cwd"; \
         if
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/missing makeinfo --split-size=5000000
 --split-size=5000000   -I
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc \
          -o
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.texinfo;
 \
         then \
           rc=0; \
           cd
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc; \
         else \
           rc=$?; \
           cd
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc && \
           $restore $backupdir/* `echo
 ".//opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info" |
 sed 's|[^/]*$||'`; \
         fi; \
         rm -rf $backupdir; exit $rc
 WARNING: `makeinfo' is missing on your system.  You should only need it if
          you modified a `.texi' or `.texinfo' file, or any other file
          indirectly affecting the aspect of the manual.  The spurious
          call might also be the consequence of using a buggy `make' (AIX,
          DU, IRIX).  You might want to install the `Texinfo' package or
          the `GNU make' package.  Grab either from any GNU archive site.
 make[3]: ***
 [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-
 binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info]
 Error 1
 Making info in po
 make[3]: Nothing to be done for `info'.
 make[3]: Nothing to be done for `info-am'.
 make[2]: *** [info-recursive] Error 1
 make[1]: *** [all-bfd] Error 2
 make: *** [all] Error 2
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/build" &&
 /usr/bin/make -j2 all " returned error 2
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/build" &&
 /usr/bin/make -j2 all " returned error 2
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for arm-none-linux-gnueabi-
 binutils): org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: The following dependencies failed to build: arm-none-linux-gnueabi-
 binutils
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>

-- 
Ticket URL: <http://trac.macports.org/ticket/25051>
MacPorts <http://www.macports.org/>
Ports system for Mac OS

More information about the macports-tickets mailing list