[MacPorts] #27291: opendx: Undefined symbols: _DestroyConstitute (was: [opendx][ 1.9.2][Error: Target org.macports.configure returned: autoreconf failure: shell command failed])

[MacPorts]

#27291: opendx: Undefined symbols: _DestroyConstitute
---------------------------------+------------------------------------------
 Reporter:  sonnyrhim@…          |       Owner:  gwright@…           
     Type:  defect               |      Status:  new                 
 Priority:  Normal               |   Milestone:                      
Component:  ports                |     Version:  1.9.2               
 Keywords:                       |        Port:  opendx              
---------------------------------+------------------------------------------
Changes (by ryandesign@…):

  * priority:  High => Normal
  * keywords:  opendx =>
  * owner:  macports-tickets@… => gwright@…
  * port:  => opendx


Old description:

> Error: Target org.macports.configure returned: autoreconf failure: shell
> command failed
>
> version:1
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main autoconf 2.68_0 exists in the ports tree
> :debug:main autoconf 2.68_0  is the latest installed
> :debug:main autoconf 2.68_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! autoconf 2.68_0 >= autoconf 2.68_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5 5.8.9_0 exists in the ports tree
> :debug:main perl5 5.8.9_0  is the latest installed
> :debug:main perl5 5.8.9_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5.8 5.8.9_3 exists in the ports tree
> :debug:main perl5.8 5.8.9_3  is the latest installed
> :debug:main perl5.8 5.8.9_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main m4 1.4.15_0 exists in the ports tree
> :debug:main m4 1.4.15_0  is the latest installed
> :debug:main m4 1.4.15_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
> <ocal/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_opendx/main.log"
> [readonly] 3442L, 543989C

New description:

 {{{
 Error: Target org.macports.configure returned: autoreconf failure: shell
 command failed

 version:1
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main autoconf 2.68_0 exists in the ports tree
 :debug:main autoconf 2.68_0  is the latest installed
 :debug:main autoconf 2.68_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! autoconf 2.68_0 >= autoconf 2.68_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5 5.8.9_0 exists in the ports tree
 :debug:main perl5 5.8.9_0  is the latest installed
 :debug:main perl5 5.8.9_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5.8 5.8.9_3 exists in the ports tree
 :debug:main perl5.8 5.8.9_3  is the latest installed
 :debug:main perl5.8 5.8.9_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main m4 1.4.15_0 exists in the ports tree
 :debug:main m4 1.4.15_0  is the latest installed
 :debug:main m4 1.4.15_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
 <ocal/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_opendx/main.log"
 [readonly] 3442L, 543989C
 }}}

--

Comment:

 The relevant error from the log appears to be:

 {{{
 :info:build Undefined symbols:
 :info:build   "_DestroyConstitute", referenced from:
 :info:build       __dxf_write_im in libDXMODS.a(_im_image.o)
 :info:build       __dxf_write_im in libDXMODS.a(_im_image.o)
 :info:build       __dxf_write_im in libDXMODS.a(_im_image.o)
 :info:build       __dxf_write_im in libDXMODS.a(_im_image.o)
 :info:build ld: symbol(s) not found
 :info:build collect2: ld returned 1 exit status
 :info:build make[3]: *** [dxexec] Error 1
 :info:build make[2]: *** [all-recursive] Error 1
 :info:build make[1]: *** [all-recursive] Error 1
 :info:build make: *** [all-recursive] Error 1
 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/27291#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS