[MacPorts] #26355: grass @6.4.0RC6 (gis): Unable to locate OpenGL includes (was: grass @6.4.0RC6 (gis) - build error)

MacPorts noreply at macports.org
Sun Sep 5 00:05:24 PDT 2010


#26355: grass @6.4.0RC6 (gis): Unable to locate OpenGL includes
--------------------------------+-------------------------------------------
 Reporter:  lfpmelzi@…          |       Owner:  macports-tickets@…                   
     Type:  defect              |      Status:  new                                  
 Priority:  Normal              |   Milestone:                                       
Component:  ports               |     Version:  1.9.1                                
 Keywords:                      |        Port:  grass                                
--------------------------------+-------------------------------------------
Changes (by ryandesign@…):

  * port:  grass @6.4.0RC6 => grass


Old description:

> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main fftw-3 3.2.2_0 exists in the ports tree
> :debug:main fftw-3 3.2.2_0  is the latest installed
> :debug:main fftw-3 3.2.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main freetype 2.4.2_0 exists in the ports tree
> :debug:main freetype 2.4.2_0  is the latest installed
> :debug:main freetype 2.4.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! freetype 2.4.2_0 >= freetype 2.4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.5_0 exists in the ports tree
> :debug:main zlib 1.2.5_0  is the latest installed
> :debug:main zlib 1.2.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gdal 1.6.2_3 exists in the ports tree
> :debug:main gdal 1.6.2_3  is the latest installed
> :debug:main gdal 1.6.2_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/gis/gdal
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gdal 1.6.2_3 >= gdal 1.6.2_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpng 1.2.44_0 exists in the ports tree
> :debug:main libpng 1.2.44_0  is the latest installed
> :debug:main libpng 1.2.44_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main tiff 3.9.4_0 exists in the ports tree
> :debug:main tiff 3.9.4_0  is the latest installed
> :debug:main tiff 3.9.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jpeg 8b_0 exists in the ports tree
> :debug:main jpeg 8b_0  is the latest installed
> :debug:main jpeg 8b_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libgeotiff 1.2.5_3 exists in the ports tree
> :debug:main libgeotiff 1.2.5_3  is the latest installed
> :debug:main libgeotiff 1.2.5_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libgeotiff
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libgeotiff 1.2.5_3 >= libgeotiff 1.2.5_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main proj 4.7.0_0 exists in the ports tree
> :debug:main proj 4.7.0_0  is the latest installed
> :debug:main proj 4.7.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/gis/proj
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! proj 4.7.0_0 >= proj 4.7.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main giflib 4.1.6_1 exists in the ports tree
> :debug:main giflib 4.1.6_1  is the latest installed
> :debug:main giflib 4.1.6_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! giflib 4.1.6_1 >= giflib 4.1.6_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libsm 1.1.1_0 exists in the ports tree
> :debug:main xorg-libsm 1.1.1_0  is the latest installed
> :debug:main xorg-libsm 1.1.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libsm
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libice 1.0.6_0 exists in the ports tree
> :debug:main xorg-libice 1.0.6_0  is the latest installed
> :debug:main xorg-libice 1.0.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libice
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice
> 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xproto 7.0.18_0 exists in the ports tree
> :debug:main xorg-xproto 7.0.18_0  is the latest installed
> :debug:main xorg-xproto 7.0.18_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-xproto 7.0.18_0 >= xorg-xproto
> 7.0.18_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libX11 1.3.5_0 exists in the ports tree
> :debug:main xorg-libX11 1.3.5_0  is the latest installed
> :debug:main xorg-libX11 1.3.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libX11 1.3.5_0 >= xorg-libX11
> 1.3.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree
> :debug:main xorg-libXdmcp 1.0.3_0  is the latest installed
> :debug:main xorg-libXdmcp 1.0.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXdmcp
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp
> 1.0.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXau 1.0.6_0 exists in the ports tree
> :debug:main xorg-libXau 1.0.6_0  is the latest installed
> :debug:main xorg-libXau 1.0.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXau
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau
> 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
> :debug:main xorg-kbproto 1.0.5_0  is the latest installed
> :debug:main xorg-kbproto 1.0.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-kbproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
> 1.0.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main geos 3.2.2_0 exists in the ports tree
> :debug:main geos 3.2.2_0  is the latest installed
> :debug:main geos 3.2.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/geos
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! geos 3.2.2_0 >= geos 3.2.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main openmotif 2.3.2_2 exists in the ports tree
> :debug:main openmotif 2.3.2_2  is the latest installed
> :debug:main openmotif 2.3.2_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! openmotif 2.3.2_2 >= openmotif 2.3.2_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.13.1_0 exists in the ports tree
> :debug:main libiconv 1.13.1_0  is the latest installed
> :debug:main libiconv 1.13.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXext 1.1.2_0 exists in the ports tree
> :debug:main xorg-libXext 1.1.2_0  is the latest installed
> :debug:main xorg-libXext 1.1.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXext
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext
> 1.1.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xextproto 7.1.2_0 exists in the ports tree
> :debug:main xorg-xextproto 7.1.2_0  is the latest installed
> :debug:main xorg-xextproto 7.1.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xextproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-xextproto 7.1.2_0 >= xorg-xextproto
> 7.1.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main Xft2 2.1.14_0 exists in the ports tree
> :debug:main Xft2 2.1.14_0  is the latest installed
> :debug:main Xft2 2.1.14_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xrender 0.9.6_0 exists in the ports tree
> :debug:main xrender 0.9.6_0  is the latest installed
> :debug:main xrender 0.9.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
> :debug:main xorg-renderproto 0.11.1_0  is the latest installed
> :debug:main xorg-renderproto 0.11.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-renderproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
> renderproto 0.11.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main fontconfig 2.8.0_0 exists in the ports tree
> :debug:main fontconfig 2.8.0_0  is the latest installed
> :debug:main fontconfig 2.8.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.0.1_1 exists in the ports tree
> :debug:main expat 2.0.1_1  is the latest installed
> :debug:main expat 2.0.1_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXmu 1.0.5_0 exists in the ports tree
> :debug:main xorg-libXmu 1.0.5_0  is the latest installed
> :debug:main xorg-libXmu 1.0.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXmu
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu
> 1.0.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXt 1.0.8_0 exists in the ports tree
> :debug:main xorg-libXt 1.0.8_0  is the latest installed
> :debug:main xorg-libXt 1.0.8_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXt
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXp 1.0.0_3 exists in the ports tree
> :debug:main xorg-libXp 1.0.0_3  is the latest installed
> :debug:main xorg-libXp 1.0.0_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXp
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXp 1.0.0_3 >= xorg-libXp 1.0.0_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-printproto 1.0.4_0 exists in the ports tree
> :debug:main xorg-printproto 1.0.4_0  is the latest installed
> :debug:main xorg-printproto 1.0.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-printproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-printproto 1.0.4_0 >= xorg-
> printproto 1.0.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
> :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
> :debug:main xorg-libpthread-stubs 0.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libpthread-stubs
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
> libpthread-stubs 0.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main tk 8.5.8_0 exists in the ports tree
> :debug:main tk 8.5.8_0  is the latest installed
> :debug:main tk 8.5.8_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main tcl 8.5.8_0 exists in the ports tree
> :debug:main tcl 8.5.8_0  is the latest installed
> :debug:main tcl 8.5.8_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
> :debug:main xorg-libXScrnSaver 1.2.0_0  is the latest installed
> :debug:main xorg-libXScrnSaver 1.2.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXScrnSaver
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-
> libXScrnSaver 1.2.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
> :debug:main xorg-scrnsaverproto 1.2.0_0  is the latest installed
> :debug:main xorg-scrnsaverproto 1.2.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-scrnsaverproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-
> scrnsaverproto 1.2.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main cairo 1.8.10_0 exists in the ports tree
> :debug:main cairo 1.8.10_0  is the latest installed
> :debug:main cairo 1.8.10_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! cairo 1.8.10_0 >= cairo 1.8.10_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpixman 0.18.4_0 exists in the ports tree
> :debug:main libpixman 0.18.4_0  is the latest installed
> :debug:main libpixman 0.18.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libpixman 0.18.4_0 >= libpixman 0.18.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main readline 6.1.000_1 exists in the ports tree
> :debug:main readline 6.1.000_1 +darwin is the latest installed
> :debug:main readline 6.1.000_1 +darwin is active
> :debug:main Merging existing variants '+darwin' into variants
> :debug:main new fully merged portvariants: darwin +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant darwin is not provided by port readline.
> :debug:main Skipping upgrade since readline 6.1.000_1 >= readline
> 6.1.000_1, even though installed variants "+darwin" do not match "".
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.7_0 exists in the ports tree
> :debug:main ncurses 5.7_0 +darwin_10 is the latest installed
> :debug:main ncurses 5.7_0 +darwin_10 is active
> :debug:main Merging existing variants '+darwin_10' into variants
> :debug:main new fully merged portvariants: darwin_10 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant darwin_10 is not provided by port ncurses.
> :debug:main Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
> though installed variants "+darwin_10" do not match "".
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncursesw 5.7_0 exists in the ports tree
> :debug:main ncursesw 5.7_0 +darwin_10 is the latest installed
> :debug:main ncursesw 5.7_0 +darwin_10 is active
> :debug:main Merging existing variants '+darwin_10' into variants
> :debug:main new fully merged portvariants: darwin_10 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant darwin_10 is not provided by port ncursesw.
> :debug:main Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
> though installed variants "+darwin_10" do not match "".
> :msg:main --->  Computing dependencies for grass:info:main .:debug:main
> Searching for dependency: fftw-3
> :debug:main Found Dependency: receipt exists for fftw-3
> :debug:main Searching for dependency: freetype
> :debug:main Found Dependency: receipt exists for freetype
> :debug:main Searching for dependency: gdal
> :debug:main Found Dependency: receipt exists for gdal
> :debug:main Searching for dependency: geos
> :debug:main Found Dependency: receipt exists for geos
> :debug:main Searching for dependency: jpeg
> :debug:main Found Dependency: receipt exists for jpeg
> :debug:main Searching for dependency: libpng
> :debug:main Found Dependency: receipt exists for libpng
> :debug:main Searching for dependency: openmotif
> :debug:main Found Dependency: receipt exists for openmotif
> :debug:main Searching for dependency: proj
> :debug:main Found Dependency: receipt exists for proj
> :debug:main Searching for dependency: tk
> :debug:main Found Dependency: receipt exists for tk
> :debug:main Searching for dependency: cairo
> :debug:main Found Dependency: receipt exists for cairo
> :debug:main Searching for dependency: readline
> :debug:main Found Dependency: receipt exists for readline
> :msg:main
> :debug:main Executing org.macports.main (grass)
> :debug:main Skipping completed org.macports.fetch (grass)
> :debug:main Skipping completed org.macports.checksum (grass)
> :debug:main Skipping completed org.macports.extract (grass)
> :debug:main Skipping completed org.macports.patch (grass)
> :msg:main --->  Configuring grass
> :debug:main Using compiler 'Mac OS X gcc 4.2'
> :debug:configure configure phase started at Sat Sep  4 23:21:50 CEST 2010
> :debug:configure Executing org.macports.configure (grass)
> :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2
> -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64'
> LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
> CXX='/usr/bin/g++-4.2'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gis_grass/work/.CC_PRINT_OPTIONS'
> F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib -framework OpenGL
> -framework Accelerate -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2
> -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64'
> FFLAGS='-O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
> :debug:configure Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gis_grass/work/grass-6.4.0RC6"
> && ./configure --prefix=/opt/local --with-fftw-
> includes=/opt/local/include --with-fftw-libs=/opt/local/lib --with-
> freetype --with-freetype-includes=/opt/local/include/freetype2 --with-
> freetype-libs=/opt/local/lib --with-gdal=/opt/local/bin/gdal-config
> --with-jpeg-includes=/opt/local/include --with-jpeg-libs=/opt/local/lib
> --with-motif --with-motif-includes=/opt/local/include --with-motif-
> libs=/opt/local/lib --with-png-includes=/opt/local/include --with-png-
> libs=/opt/local/lib --with-proj-includes=/opt/local/include --with-proj-
> libs=/opt/local/lib --with-proj-share=/opt/local/share/proj --with-tcltk-
> includes=/opt/local/include --with-tcltk-libs=/opt/local/lib --with-cxx
> --with-x --without-postgres --enable-largefile --with-cairo --with-cairo-
> includes=/opt/local/include/cairo --with-cairo-libs=/opt/local/lib
> --with-blas --with-lapack --with-readline --with-readline-
> includes=/opt/local/include/readline --with-readline-libs=/opt/local/lib
> --with-regex-includes=/usr/include --with-regex-lib=/usr/lib'
> :info:configure checking host system type... i386-apple-darwin10.4.0
> :info:configure checking for gcc... /usr/bin/gcc-4.2
> :info:configure checking whether the C compiler (/usr/bin/gcc-4.2 -O2
> -arch x86_64 -L/opt/local/lib -framework OpenGL -framework Accelerate
> -arch x86_64) works... yes
> :info:configure checking whether the C compiler (/usr/bin/gcc-4.2 -O2
> -arch x86_64 -L/opt/local/lib -framework OpenGL -framework Accelerate
> -arch x86_64) is a cross-compiler... no
> :info:configure checking whether we are using GNU C... yes
> :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
> :info:configure checking for Cygwin environment... no
> :info:configure checking for mingw32 environment... no
> :info:configure checking for executable suffix... no
> :info:configure checking for full floating-point support... yes
> :info:configure checking for pwd... /bin/pwd
> :info:configure checking for source directory...
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gis_grass/work/grass-6.4.0RC6
> :info:configure checking for build directory...
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gis_grass/work/grass-6.4.0RC6
> :info:configure checking for MacOSX App... no
> :info:configure checking for MacOSX architectures... no
> :info:configure checking for MacOSX SDK... no
> :info:configure checking how to build libraries... shared
> :info:configure checking for ranlib... ranlib
> :info:configure checking how to run the C preprocessor...
> /usr/bin/gcc-4.2 -E
> :info:configure checking if 64bit support is requested... no
> :info:configure checking if 64bit Sparc VIS support is requested... no
> :info:configure checking system version (for dynamic loading)...
> Darwin-10.4.0
> :info:configure checking for dlopen in -ldl... yes
> :info:configure checking for ar... ar
> :info:configure checking for additional include dirs...
> :info:configure checking for additional library dirs...
> :info:configure checking for a BSD compatible install... /usr/bin/install
> -c
> :info:configure checking for flex... flex
> :info:configure checking for yywrap in -lfl... yes
> :info:configure checking for bison... bison -y
> :info:configure checking for ranlib... ranlib
> :info:configure checking for ar... ar
> :info:configure checking for env... env
> :info:configure checking for perl... /opt/local/bin/perl
> :info:configure checking for ANSI C header files... yes
> :info:configure checking for limits.h... yes
> :info:configure checking for termio.h... no
> :info:configure checking for termios.h... yes
> :info:configure checking for unistd.h... yes
> :info:configure checking for values.h... no
> :info:configure checking for f2c.h... no
> :info:configure checking for g2c.h... no
> :info:configure checking for sys/ioctl.h... yes
> :info:configure checking for sys/mtio.h... no
> :info:configure checking for sys/resource.h... yes
> :info:configure checking for sys/time.h... yes
> :info:configure checking for sys/timeb.h... yes
> :info:configure checking for sys/types.h... yes
> :info:configure checking for sys/utsname.h... yes
> :info:configure checking for libintl.h... yes
> :info:configure checking for iconv.h... yes
> :info:configure checking for langinfo.h... yes
> :info:configure checking whether time.h and sys/time.h may both be
> included... yes
> :info:configure checking for off_t... yes
> :info:configure checking for uid_t in sys/types.h... yes
> :info:configure checking return type of signal handlers... void
> :info:configure checking for Cygwin environment... no
> :info:configure checking for ftime... yes
> :info:configure checking for gethostname... yes
> :info:configure checking for gettimeofday... yes
> :info:configure checking for lseek... yes
> :info:configure checking for nice... yes
> :info:configure checking for time... yes
> :info:configure checking for uname... yes
> :info:configure checking for seteuid... yes
> :info:configure checking for setpriority... yes
> :info:configure checking for setreuid... yes
> :info:configure checking for setruid... yes
> :info:configure checking for drand48... yes
> :info:configure checking for putenv... yes
> :info:configure checking for setenv... yes
> :info:configure checking for nanosleep... yes
> :info:configure checking whether setpgrp takes no argument... yes
> :info:configure checking for long long int... yes
> :info:configure checking for W11... no
> :info:configure checking for X... libraries , headers
> :info:configure checking for dnet_ntoa in -ldnet... no
> :info:configure checking for dnet_ntoa in -ldnet_stub... no
> :info:configure checking for gethostbyname... yes
> :info:configure checking for connect... yes
> :info:configure checking for remove... yes
> :info:configure checking for shmat... yes
> :info:configure checking for IceConnectionNumber in -lICE... yes
> :info:configure checking whether to use Curses... yes
> :info:configure checking for curses.h... yes
> :info:configure checking curses.h WINDOW structure component... NONE
> :info:configure checking for initscr in -lncurses... yes
> :info:configure checking for keypad in -lncurses... yes
> :info:configure checking for gtty in -lcompat... no
> :info:configure checking for gtty in -lbsd-compat... no
> :info:configure checking for gtty in -lbsd... no
> :info:configure checking for library containing cuserid... no
> :info:configure checking for xdrmem_create... yes
> :info:configure checking for asprintf... yes
> :info:configure checking for atan... yes
> :info:configure checking for dlsym... yes
> :info:configure checking for iconv... no
> :info:configure checking for iconv in -liconv... no
> :info:configure checking for iconv in -lgiconv... no
> :info:configure checking for libiconv... no
> :info:configure checking for libiconv in -liconv... yes
> :info:configure checking for socket... yes
> :info:configure checking for location of zlib includes...
> :info:configure checking for zlib.h... yes
> :info:configure checking for location of zlib library...
> :info:configure checking for deflate in -lz... yes
> :info:configure checking for location of External PROJ.4 includes...
> /opt/local/include
> :info:configure checking for proj_api.h... yes
> :info:configure checking External PROJ.4 version... 470
> :info:configure checking for location of External PROJ.4 library...
> /opt/local/lib
> :info:configure checking for pj_get_def in -lproj... yes
> :info:configure checking for location of External PROJ.4 data files...
> /opt/local/share/proj
> :info:configure checking for /opt/local/share/proj/epsg... yes
> :info:configure checking for nad2bin... /opt/local/bin/nad2bin
> :info:configure checking whether to use regex... yes
> :info:configure checking for location of regex includes... /usr/include
> :info:configure checking for regex.h... yes
> :info:configure checking for location of regex library...
> :info:configure checking for regcomp... yes
> :info:configure checking whether to use Readline... yes
> :info:configure checking for location of Readline includes...
> /opt/local/include/readline
> :info:configure checking for readline/readline.h... yes
> :info:configure checking for readline/history.h... yes
> :info:configure checking for location of Readline library...
> /opt/local/lib
> :info:configure checking for readline in -lreadline... yes
> :info:configure checking for add_history in -lhistory... yes
> :info:configure checking whether to use JPEG... yes
> :info:configure checking for location of JPEG includes...
> /opt/local/include
> :info:configure checking for jpeglib.h... yes
> :info:configure checking for location of JPEG library... /opt/local/lib
> :info:configure checking for jpeg_start_compress in -ljpeg... yes
> :info:configure checking whether to use GDAL... yes
> :info:configure checking for gdal-config... /opt/local/bin/gdal-config
> :info:configure checking whether to use TIFF... yes
> :info:configure checking for location of TIFF includes...
> :info:configure checking for tiffio.h... yes
> :info:configure checking for location of TIFF library...
> :info:configure checking for TIFFOpen in -ltiff... yes
> :info:configure checking whether to use PNG... yes
> :info:configure checking for location of PNG includes...
> /opt/local/include
> :info:configure checking for png.h... yes
> :info:configure checking for location of PNG library... /opt/local/lib
> :info:configure checking for png_read_image in -lpng... yes
> :info:configure checking whether to use PostgreSQL... no
> :info:configure checking whether to use MySQL... no
> :info:configure checking whether to use SQLite... no
> :info:configure checking whether to use FFMPEG... no
> :info:configure checking whether to use OpenGL... yes
> :info:configure checking for location of OpenGL includes...
> :info:configure checking for GL/gl.h... no
> :info:configure configure: error: *** Unable to locate OpenGL includes.
> :info:configure shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gis_grass/work/grass-6.4.0RC6"
> && ./configure --prefix=/opt/local --with-fftw-
> includes=/opt/local/include --with-fftw-libs=/opt/local/lib --with-
> freetype --with-freetype-includes=/opt/local/include/freetype2 --with-
> freetype-libs=/opt/local/lib --with-gdal=/opt/local/bin/gdal-config
> --with-jpeg-includes=/opt/local/include --with-jpeg-libs=/opt/local/lib
> --with-motif --with-motif-includes=/opt/local/include --with-motif-
> libs=/opt/local/lib --with-png-includes=/opt/local/include --with-png-
> libs=/opt/local/lib --with-proj-includes=/opt/local/include --with-proj-
> libs=/opt/local/lib --with-proj-share=/opt/local/share/proj --with-tcltk-
> includes=/opt/local/include --with-tcltk-libs=/opt/local/lib --with-cxx
> --with-x --without-postgres --enable-largefile --with-cairo --with-cairo-
> includes=/opt/local/include/cairo --with-cairo-libs=/opt/local/lib
> --with-blas --with-lapack --with-readline --with-readline-
> includes=/opt/local/include/readline --with-readline-libs=/opt/local/lib
> --with-regex-includes=/usr/include --with-regex-lib=/usr/lib " returned
> error 1
> :error:configure Target org.macports.configure returned: configure
> failure: shell command failed
> :debug:configure Backtrace: configure failure: shell command failed
>     while executing
> "$procedure $targetname"
> :info:configure Warning: the following items did not execute (for grass):
> org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> :notice:configure Log for grass is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gis_grass/main.log

New description:

 {{{
 :info:configure checking whether to use OpenGL... yes
 :info:configure checking for location of OpenGL includes...
 :info:configure checking for GL/gl.h... no
 :info:configure configure: error: *** Unable to locate OpenGL includes.
 }}}

--

Comment:

 I've converted your voluminous log into an attachment. Please also observe
 WikiFormatting rules.

-- 
Ticket URL: <http://trac.macports.org/ticket/26355#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list