[MacPorts] #19316: problem installing qt4-kde or qt4-mac

[MacPorts]

#19316: problem installing qt4-kde or qt4-mac
---------------------------------------+------------------------------------
  Reporter:  mannequinZOD@…            |       Owner:  erickt@…           
      Type:  defect                    |      Status:  reopened           
  Priority:  Normal                    |   Milestone:                     
 Component:  ports                     |     Version:  1.7.1              
Resolution:                            |    Keywords:                     
      Port:  qt4-mac, qt4-kde          |  
---------------------------------------+------------------------------------
Changes (by frases@…):

  * status:  closed => reopened
  * resolution:  worksforme =>


Comment:

 Guys,
 I seem to be experiencing a similar problem trying to install qt4-x11, but
 with the most recent version of MacPorts:
 {{{
 bash-3.2$ sudo port version
 Version: 1.9.2
 }}}
 on MacOSX 10.5.8 running XCode 3.1.2.

 I had performed a recent reinstall of MacPorts using these instructions:
 [http://guide.macports.org/#installing.macports.uninstalling]

 And then built from the binary .dmg:
 [http://guide.macports.org/#installing.macports.binary]

 After I did the reinstall, I installed my preferred set of packages.  I
 wanted to install qjackctl, which depended on qt gui toolkit, specifically
 qt4-x11.  That's where my troubles started.  Here is the record of my most
 recent try:
 {{{
 bash-3.2$ sudo port clean qt4-x11
 --->  Cleaning qt4-x11
 bash-3.2$ sudo port uninstall qt4-x11
 bash-3.2$ sudo port -fR upgrade openssl
 bash-3.2$ sudo port install qt4-x11
 }}}
 This resulted in a familiar type of error:
 {{{
 :info:build /usr/bin/g++-4.0 -c -pipe -O2 -arch i386
 -isystem/opt/local/include -I/opt/local/include/mysql5/mysql
 -I/opt/local/include/postgresql83 -I/opt/local/include/gstreamer-0.10
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include/libxml2 -O2 -fvisibility=hidden -fvisibility-inlines-
 hidden -Wall -W -fPIC -DQT_SHARED -D__USE_WS_X11__ -DQT_BUILD_NETWORK_LIB
 -DQT_NO_USING_NAMESPACE -DQT_NO_CAST_TO_ASCII -DQT_ASCII_CAST_WARNINGS
 -DQT3_SUPPORT -DQT_MOC_COMPAT -DQT_NO_DEBUG -DQT_CORE_LIB
 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I../../mkspecs/darwin-g++ -I.
 -I../../include/QtCore -I../../include/QtCore -I../../include
 -I../../include/QtNetwork -I.rcc/release-shared -Ikernel -I/usr/include
 -I.moc/release-shared -I.uic/release-shared -o .obj/release-
 shared/qsslconfiguration.o ssl/qsslconfiguration.cpp
 :info:build ssl/qsslsocket_openssl_symbols_p.h:264: error: variable or
 field 'q_sk_free' declared void
 :info:build ssl/qsslsocket_openssl_symbols_p.h:264: error: 'STACK' was not
 declared in this scope
 :info:build ssl/qsslsocket_openssl_symbols_p.h:264: error: 'a' was not
 declared in this scope
 :info:build ssl/qsslsocket_openssl_symbols_p.h:265: error: 'STACK' was not
 declared in this scope
 :info:build ssl/qsslsocket_openssl_symbols_p.h:265: error: 'a' was not
 declared in this scope
 :info:build ssl/qsslsocket_openssl_symbols_p.h:266: error: 'STACK' was not
 declared in this scope
 :info:build ssl/qsslsocket_openssl_symbols_p.h:266: error: 'a' was not
 declared in this scope
 :info:build ssl/qsslsocket_openssl_symbols_p.h:266: error: expected
 primary-expression before 'int'
 :info:build ssl/qsslsocket_openssl_symbols_p.h:266: error: initializer
 expression list treated as compound expression
 :info:build ssl/qsslcertificate.cpp: In member function
 'QMultiMap<QSsl::AlternateNameEntryType, QString>
 QSslCertificate::alternateSubjectNames() const':
 :info:build ssl/qsslcertificate.cpp:372: error: 'STACK' was not declared
 in this scope
 :info:build ssl/qsslcertificate.cpp:372: error: 'altNames' was not
 declared in this scope
 :info:build ssl/qsslcertificate.cpp:372: error: expected primary-
 expression before ')' token
 :info:build ssl/qsslcertificate.cpp:372: error: expected `;' before
 'q_X509_get_ext_d2i'
 :info:build ssl/qsslcertificate.cpp:393: error: 'q_sk_free' cannot be used
 as a function
 :info:build make[1]: *** [.obj/release-shared/qsslcertificate.o] Error 1
 :info:build make[1]: *** Waiting for unfinished jobs....
 :info:build make: *** [sub-network-make_default-ordered] Error 2
 :info:build shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_qt4-x11/work/qt-x11
 -opensource-src-4.4.3" && /usr/bin/make -j2 first " returned error 2
 :error:build Target org.macports.build returned: shell command failed (see
 log for details)
 :debug:build Backtrace: shell command failed (see log for details)
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: the following items did not execute (for qt4-x11):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 :notice:build Log for qt4-x11 is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_qt4-x11/main.log
 }}}
 I'm using the most recent version of openssl
 {{{
 mac:~ newuser$ sudo port installed | grep openssl
 Password:
   openssl @0.9.8k_0
   openssl @1.0.0a_0
   openssl @1.0.0d_0 (active)
 }}}
 The others are in the list because I tried some of the suggestions above,
 using various combinations of older versions of qt4-x11 and openssl.  To
 no avail, of course.

 Since this thread didn't have a completed resolution, I'm kind of left
 hanging as to a solid solution.

 Does anyone have any ideas?
 Is it necessary that openssl be used for qt4-x11?
 Can I just disable it from the configure process of qt4-x11?

 thanks for listening,
 scott

-- 
Ticket URL: <https://trac.macports.org/ticket/19316#comment:13>
MacPorts <http://www.macports.org/>
Ports system for Mac OS