[MacPorts] #27902: kdebase4-workspace @4.5.2 Configure error - build failure

Sat Jan 8 22:00:17 PST 2011

#27902: kdebase4-workspace @4.5.2 Configure error - build failure
-----------------------------------+----------------------------------------
 Reporter:  ratonovitch@…          |       Owner:  macports-tickets@…                   
     Type:  defect                 |      Status:  new                                  
 Priority:  Normal                 |   Milestone:                                       
Component:  ports                  |     Version:  1.9.2                                
 Keywords:                         |        Port:                                       
-----------------------------------+----------------------------------------
 I am having a couple issues during configure of kdebase4-workspace. I need
 some help.[[BR]]
 Please see the build log below. There appear to be two issues toward the
 end of the log file:

 {{{
 :info:configure Traceback (most recent call last):
 :info:configure   File
 "/opt/local/share/apps/cmake/modules/FindPyKDE4.py", line 8, in <module>
 :info:configure     import PyKDE4.pykdeconfig
 :info:configure ImportError: No module named PyKDE4.pykdeconfig
 }}}
 and
 {{{
 :info:configure CMake Error at ksysguard/ksysguardd/CMakeLists.txt:33
 (add_subdirectory):
 :info:configure   add_subdirectory given source "Darwin" which is not an
 existing directory.
 }}}

 To remedy the pykde4 dependency, I tried building kdeutils4 @4.3.2, but
 gave up after finding that was dependent on deprecated
 kdelibs4-experimental.

 OS X 10.6.6[[BR]]
 Xcode Version 3.2.2 (1650)

 from
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/main.log:
 {{{
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cmake 2.8.3_1 exists in the ports tree
 :debug:main cmake 2.8.3_1  is the latest installed
 :debug:main cmake 2.8.3_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! cmake 2.8.3_1 >= cmake 2.8.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libidn 1.19_0 exists in the ports tree
 :debug:main libidn 1.19_0  is the latest installed
 :debug:main libidn 1.19_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libidn 1.19_0 >= libidn 1.19_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.13.1_0 exists in the ports tree
 :debug:main libiconv 1.13.1_0 +universal is the latest installed
 :debug:main libiconv 1.13.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2 +universal is the latest installed
 :debug:main gettext 0.18.1.1_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.7_1 exists in the ports tree
 :debug:main ncurses 5.7_1 +universal is the latest installed
 :debug:main ncurses 5.7_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncursesw 5.7_1 exists in the ports tree
 :debug:main ncursesw 5.7_1 +universal is the latest installed
 :debug:main ncursesw 5.7_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_1 exists in the ports tree
 :debug:main expat 2.0.1_1 +universal is the latest installed
 :debug:main expat 2.0.1_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.0c_0 exists in the ports tree
 :debug:main openssl 1.0.0c_0  is the latest installed
 :debug:main openssl 1.0.0c_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! openssl 1.0.0c_0 >= openssl 1.0.0c_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.5_0 exists in the ports tree
 :debug:main zlib 1.2.5_0  is the latest installed
 :debug:main zlib 1.2.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main pkgconfig 0.25_1 exists in the ports tree
 :debug:main pkgconfig 0.25_1 +universal is the latest installed
 :debug:main pkgconfig 0.25_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! pkgconfig 0.25_1 >= pkgconfig 0.25_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main automoc 0.9.88_3 exists in the ports tree
 :debug:main automoc 0.9.88_3  is the latest installed
 :debug:main automoc 0.9.88_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automoc
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! automoc 0.9.88_3 >= automoc 0.9.88_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main qt4-mac 4.7.1_0 exists in the ports tree
 :debug:main qt4-mac 4.7.1_0 +quartz is the latest installed
 :debug:main qt4-mac 4.7.1_0 +quartz is active
 :debug:main Merging existing variants '+quartz' into variants
 :debug:main new fully merged portvariants: quartz +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant quartz provides quartz
 :debug:main No need to upgrade! qt4-mac 4.7.1_0 >= qt4-mac 4.7.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus 1.2.24_1 exists in the ports tree
 :debug:main dbus 1.4.0_1  is the latest installed
 :debug:main dbus 1.4.0_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! dbus 1.4.0_1 >= dbus 1.2.24_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main sqlite3 3.7.3_0 exists in the ports tree
 :debug:main sqlite3 3.7.3_0  is the latest installed
 :debug:main sqlite3 3.7.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! sqlite3 3.7.3_0 >= sqlite3 3.7.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main readline 6.1.002_0 exists in the ports tree
 :debug:main readline 6.1.002_0 +universal is the latest installed
 :debug:main readline 6.1.002_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! readline 6.1.002_0 >= readline 6.1.002_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main tiff 3.9.4_0 exists in the ports tree
 :debug:main tiff 3.9.4_0  is the latest installed
 :debug:main tiff 3.9.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jpeg 8b_0 exists in the ports tree
 :debug:main jpeg 8b_0  is the latest installed
 :debug:main jpeg 8b_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpng 1.2.44_0 exists in the ports tree
 :debug:main libpng 1.2.44_0  is the latest installed
 :debug:main libpng 1.2.44_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libmng 1.0.10_2 exists in the ports tree
 :debug:main libmng 1.0.10_2  is the latest installed
 :debug:main libmng 1.0.10_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main lcms 1.19_2 exists in the ports tree
 :debug:main lcms 1.19_2  is the latest installed
 :debug:main lcms 1.19_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main phonon 4.4.2_3 exists in the ports tree
 :debug:main phonon 4.4.2_3  is the latest installed
 :debug:main phonon 4.4.2_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/phonon
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! phonon 4.4.2_3 >= phonon 4.4.2_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main glib2 2.26.1_0 exists in the ports tree
 :debug:main glib2 2.26.1_0  is the latest installed
 :debug:main glib2 2.26.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! glib2 2.26.1_0 >= glib2 2.26.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5 5.8.9_0 exists in the ports tree
 :debug:main perl5 5.8.9_0  is the latest installed
 :debug:main perl5 5.8.9_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5.8 5.8.9_3 exists in the ports tree
 :debug:main perl5.8 5.8.9_3 +universal is the latest installed
 :debug:main perl5.8 5.8.9_3 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python_select 0.3_0 exists in the ports tree
 :debug:main python_select 0.3_0  is the latest installed
 :debug:main python_select 0.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! python_select 0.3_0 >= python_select 0.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main kdebase4-runtime 4.5.4_0 exists in the ports tree
 :debug:main kdebase4-runtime 4.5.4_0  is the latest installed
 :debug:main kdebase4-runtime 4.5.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdebase4-runtime
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! kdebase4-runtime 4.5.4_0 >=
 kdebase4-runtime 4.5.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main kdelibs4 4.5.4_0 exists in the ports tree
 :debug:main kdelibs4 4.5.4_0  is the latest installed
 :debug:main kdelibs4 4.5.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! kdelibs4 4.5.4_0 >= kdelibs4 4.5.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0  is the latest installed
 :debug:main bzip2 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main soprano 2.5.63_0 exists in the ports tree
 :debug:main soprano 2.5.63_0  is the latest installed
 :debug:main soprano 2.5.63_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/soprano
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! soprano 2.5.63_0 >= soprano 2.5.63_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main clucene 0.9.21b_0 exists in the ports tree
 :debug:main clucene 0.9.21b_0  is the latest installed
 :debug:main clucene 0.9.21b_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/clucene
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! clucene 0.9.21b_0 >= clucene 0.9.21b_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main strigi 0.6.4_0 exists in the ports tree
 :debug:main strigi 0.6.4_0  is the latest installed
 :debug:main strigi 0.6.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/strigi
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! strigi 0.6.4_0 >= strigi 0.6.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxml2 2.7.8_0 exists in the ports tree
 :debug:main libxml2 2.7.8_0  is the latest installed
 :debug:main libxml2 2.7.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main redland 1.0.12_0 exists in the ports tree
 :debug:main redland 1.0.12_0 +db46 is the latest installed
 :debug:main redland 1.0.12_0 +db46 is active
 :debug:main Merging existing variants '+db46' into variants
 :debug:main new fully merged portvariants: db46 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/redland
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main Executing variant db46 provides db46
 :debug:main No need to upgrade! redland 1.0.12_0 >= redland 1.0.12_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main curl 7.21.2_2 exists in the ports tree
 :debug:main curl 7.21.2_2 +ssl is the latest installed
 :debug:main curl 7.21.2_2 +ssl is active
 :debug:main Merging existing variants '+ssl' into variants
 :debug:main new fully merged portvariants: ssl +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant ssl provides ssl
 :debug:main No need to upgrade! curl 7.21.2_2 >= curl 7.21.2_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main curl-ca-bundle 7.21.2_4 exists in the ports tree
 :debug:main curl-ca-bundle 7.21.2_4  is the latest installed
 :debug:main curl-ca-bundle 7.21.2_4  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-
 ca-bundle
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! curl-ca-bundle 7.21.2_4 >= curl-ca-bundle
 7.21.2_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxslt 1.1.26_0 exists in the ports tree
 :debug:main libxslt 1.1.26_0  is the latest installed
 :debug:main libxslt 1.1.26_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main raptor 1.4.21_1 exists in the ports tree
 :debug:main raptor 1.4.21_1  is the latest installed
 :debug:main raptor 1.4.21_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/raptor
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! raptor 1.4.21_1 >= raptor 1.4.21_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main rasqal 0.9.21_0 exists in the ports tree
 :debug:main rasqal 0.9.21_0  is the latest installed
 :debug:main rasqal 0.9.21_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/rasqal
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! rasqal 0.9.21_0 >= rasqal 0.9.21_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main mpfr 3.0.0-p8_0 exists in the ports tree
 :debug:main mpfr 3.0.0-p8_0  is the latest installed
 :debug:main mpfr 3.0.0-p8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! mpfr 3.0.0-p8_0 >= mpfr 3.0.0-p8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gmp 5.0.1_0 exists in the ports tree
 :debug:main gmp 5.0.1_0  is the latest installed
 :debug:main gmp 5.0.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main db46 4.6.21_6 exists in the ports tree
 :debug:main db46 4.6.21_6  is the latest installed
 :debug:main db46 4.6.21_6  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiodbc 3.52.7_0 exists in the ports tree
 :debug:main libiodbc 3.52.7_0  is the latest installed
 :debug:main libiodbc 3.52.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libiodbc
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libiodbc 3.52.7_0 >= libiodbc 3.52.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main virtuoso 6.1.2_1 exists in the ports tree
 :debug:main virtuoso 6.1.2_1  is the latest installed
 :debug:main virtuoso 6.1.2_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/virtuoso
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! virtuoso 6.1.2_1 >= virtuoso 6.1.2_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cyrus-sasl2 2.1.23_3 exists in the ports tree
 :debug:main cyrus-sasl2 2.1.23_3 +kerberos is the latest installed
 :debug:main cyrus-sasl2 2.1.23_3 +kerberos is active
 :debug:main Merging existing variants '+kerberos' into variants
 :debug:main new fully merged portvariants: kerberos +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/security
 /cyrus-sasl2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant kerberos provides kerberos
 :debug:main No need to upgrade! cyrus-sasl2 2.1.23_3 >= cyrus-sasl2
 2.1.23_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main pcre 8.10_0 exists in the ports tree
 :debug:main pcre 8.10_0  is the latest installed
 :debug:main pcre 8.10_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! pcre 8.10_0 >= pcre 8.10_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main shared-mime-info 0.90_0 exists in the ports tree
 :debug:main shared-mime-info 0.90_0  is the latest installed
 :debug:main shared-mime-info 0.90_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /shared-mime-info
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! shared-mime-info 0.90_0 >= shared-mime-
 info 0.90_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main giflib 4.1.6_1 exists in the ports tree
 :debug:main giflib 4.1.6_1  is the latest installed
 :debug:main giflib 4.1.6_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! giflib 4.1.6_1 >= giflib 4.1.6_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libsm 1.2.0_0 exists in the ports tree
 :debug:main xorg-libsm 1.2.0_0  is the latest installed
 :debug:main xorg-libsm 1.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libsm
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libsm 1.2.0_0 >= xorg-libsm 1.2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libice 1.0.7_0 exists in the ports tree
 :debug:main xorg-libice 1.0.7_0  is the latest installed
 :debug:main xorg-libice 1.0.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libice
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libice 1.0.7_0 >= xorg-libice 1.0.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xproto 7.0.20_0 exists in the ports tree
 :debug:main xorg-xproto 7.0.20_0  is the latest installed
 :debug:main xorg-xproto 7.0.20_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xproto 7.0.20_0 >= xorg-xproto
 7.0.20_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libX11 1.4.0_1 exists in the ports tree
 :debug:main xorg-libX11 1.4.0_1  is the latest installed
 :debug:main xorg-libX11 1.4.0_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libX11 1.4.0_1 >= xorg-libX11 1.4.0_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
 :debug:main xorg-libXdmcp 1.1.0_0  is the latest installed
 :debug:main xorg-libXdmcp 1.1.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp
 1.1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXau 1.0.6_0 exists in the ports tree
 :debug:main xorg-libXau 1.0.6_0  is the latest installed
 :debug:main xorg-libXau 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libxcb 1.7_0 exists in the ports tree
 :debug:main xorg-libxcb 1.7_0 +python26 is the latest installed
 :debug:main xorg-libxcb 1.7_0 +python26 is active
 :debug:main Merging existing variants '+python26' into variants
 :debug:main new fully merged portvariants: python26 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libxcb
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant python26 provides python26
 :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
 :debug:main xorg-xcb-proto 1.6_0 +python26 is the latest installed
 :debug:main xorg-xcb-proto 1.6_0 +python26 is active
 :debug:main Merging existing variants '+python26' into variants
 :debug:main new fully merged portvariants: python26 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-proto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Executing variant python26 provides python26
 :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto
 1.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python26 2.6.6_1 exists in the ports tree
 :debug:main python26 2.6.6_1  is the latest installed
 :debug:main python26 2.6.6_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! python26 2.6.6_1 >= python26 2.6.6_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdbm 1.8.3_3 exists in the ports tree
 :debug:main gdbm 1.8.3_3  is the latest installed
 :debug:main gdbm 1.8.3_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
 :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
 :debug:main xorg-libpthread-stubs 0.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libpthread-stubs
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
 libpthread-stubs 0.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
 :debug:main xorg-kbproto 1.0.5_0  is the latest installed
 :debug:main xorg-kbproto 1.0.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
 1.0.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jasper 1.900.1_7 exists in the ports tree
 :debug:main jasper 1.900.1_7  is the latest installed
 :debug:main jasper 1.900.1_7  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main openexr 1.6.1_1 exists in the ports tree
 :debug:main openexr 1.6.1_1  is the latest installed
 :debug:main openexr 1.6.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ilmbase 1.0.1_2 exists in the ports tree
 :debug:main ilmbase 1.0.1_2  is the latest installed
 :debug:main ilmbase 1.0.1_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libart_lgpl 2.3.21_0 exists in the ports tree
 :debug:main libart_lgpl 2.3.21_0  is the latest installed
 :debug:main libart_lgpl 2.3.21_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libart_lgpl 2.3.21_0 >= libart_lgpl
 2.3.21_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main enchant 1.6.0_0 exists in the ports tree
 :debug:main enchant 1.6.0_0  is the latest installed
 :debug:main enchant 1.6.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/enchant
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! enchant 1.6.0_0 >= enchant 1.6.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main aspell 0.60.6_4 exists in the ports tree
 :debug:main aspell 0.60.6_4 +nonls is the latest installed
 :debug:main aspell 0.60.6_4 +nonls is active
 :debug:main Merging existing variants '+nonls' into variants
 :debug:main new fully merged portvariants: nonls +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main Executing variant nonls provides nonls
 :debug:main No need to upgrade! aspell 0.60.6_4 >= aspell 0.60.6_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main texinfo 4.13_2 exists in the ports tree
 :debug:main texinfo 4.13_2 +universal is the latest installed
 :debug:main texinfo 4.13_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main hunspell 1.2.12_0 exists in the ports tree
 :debug:main hunspell 1.2.12_0  is the latest installed
 :debug:main hunspell 1.2.12_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/hunspell
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! hunspell 1.2.12_0 >= hunspell 1.2.12_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main aspell-dict-en 6.0_0 exists in the ports tree
 :debug:main aspell-dict-en 6.0_0  is the latest installed
 :debug:main aspell-dict-en 6.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /aspell-dict-en
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! aspell-dict-en 6.0_0 >= aspell-dict-en
 6.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main attica 0.2.0_1 exists in the ports tree
 :debug:main attica 0.2.0_1  is the latest installed
 :debug:main attica 0.2.0_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/attica
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! attica 0.2.0_1 >= attica 0.2.0_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main liblzma 5.0.0_0 exists in the ports tree
 :debug:main liblzma 5.0.0_0  is the latest installed
 :debug:main liblzma 5.0.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liblzma
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! liblzma 5.0.0_0 >= liblzma 5.0.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main avahi 0.6.28_2 exists in the ports tree
 :debug:main avahi 0.6.28_2  is the latest installed
 :debug:main avahi 0.6.28_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/avahi
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! avahi 0.6.28_2 >= avahi 0.6.28_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libdaemon 0.14_0 exists in the ports tree
 :debug:main libdaemon 0.14_0  is the latest installed
 :debug:main libdaemon 0.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libdaemon
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libdaemon 0.14_0 >= libdaemon 0.14_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libglade2 2.6.4_1 exists in the ports tree
 :debug:main libglade2 2.6.4_1  is the latest installed
 :debug:main libglade2 2.6.4_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libglade2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libglade2 2.6.4_1 >= libglade2 2.6.4_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main fontconfig 2.8.0_0 exists in the ports tree
 :debug:main fontconfig 2.8.0_0 +macosx is the latest installed
 :debug:main fontconfig 2.8.0_0 +macosx is active
 :debug:main Merging existing variants '+macosx' into variants
 :debug:main new fully merged portvariants: macosx +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Requested variant macosx is not provided by port fontconfig.
 :debug:main Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig
 2.8.0_0, even though installed variants "+macosx" do not match "".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main freetype 2.4.4_0 exists in the ports tree
 :debug:main freetype 2.4.4_0  is the latest installed
 :debug:main freetype 2.4.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! freetype 2.4.4_0 >= freetype 2.4.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gtk2 2.22.1_0 exists in the ports tree
 :debug:main gtk2 2.22.1_0 +x11 is the latest installed
 :debug:main gtk2 2.22.1_0 +x11 is active
 :debug:main Merging existing variants '+x11' into variants
 :debug:main new fully merged portvariants: x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! gtk2 2.22.1_0 >= gtk2 2.22.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main atk 1.30.0_0 exists in the ports tree
 :debug:main atk 1.30.0_0  is the latest installed
 :debug:main atk 1.30.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! atk 1.30.0_0 >= atk 1.30.0_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main pango 1.28.3_0 exists in the ports tree
 :debug:main pango 1.28.3_0  is the latest installed
 :debug:main pango 1.28.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main No need to upgrade! pango 1.28.3_0 >= pango 1.28.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main Xft2 2.2.0_0 exists in the ports tree
 :debug:main Xft2 2.2.0_0  is the latest installed
 :debug:main Xft2 2.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xrender 0.9.6_0 exists in the ports tree
 :debug:main xrender 0.9.6_0  is the latest installed
 :debug:main xrender 0.9.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
 :debug:main xorg-renderproto 0.11.1_0  is the latest installed
 :debug:main xorg-renderproto 0.11.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
 renderproto 0.11.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cairo 1.10.2_0 exists in the ports tree
 :debug:main cairo 1.10.2_0 +x11_xcb is the latest installed
 :debug:main cairo 1.10.2_0 +x11_xcb is active
 :debug:main Merging existing variants '+x11_xcb' into variants
 :debug:main new fully merged portvariants: x11_xcb +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant x11_xcb provides x11_xcb
 :debug:main No need to upgrade! cairo 1.10.2_0 >= cairo 1.10.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpixman 0.20.0_0 exists in the ports tree
 :debug:main libpixman 0.20.0_0  is the latest installed
 :debug:main libpixman 0.20.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libpixman 0.20.0_0 >= libpixman 0.20.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-util 0.3.6_0 exists in the ports tree
 :debug:main xorg-xcb-util 0.3.6_0  is the latest installed
 :debug:main xorg-xcb-util 0.3.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-util
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-xcb-util 0.3.6_0 >= xorg-xcb-util
 0.3.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdk-pixbuf2 2.22.1_0 exists in the ports tree
 :debug:main gdk-pixbuf2 2.22.1_0  is the latest installed
 :debug:main gdk-pixbuf2 2.22.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics
 /gdk-pixbuf2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gdk-pixbuf2 2.22.1_0 >= gdk-pixbuf2
 2.22.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXi 1.4.0_0 exists in the ports tree
 :debug:main xorg-libXi 1.4.0_0  is the latest installed
 :debug:main xorg-libXi 1.4.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXi
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXi 1.4.0_0 >= xorg-libXi 1.4.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXext 1.2.0_0 exists in the ports tree
 :debug:main xorg-libXext 1.2.0_0  is the latest installed
 :debug:main xorg-libXext 1.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXext 1.2.0_0 >= xorg-libXext
 1.2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xextproto 7.1.2_0 exists in the ports tree
 :debug:main xorg-xextproto 7.1.2_0  is the latest installed
 :debug:main xorg-xextproto 7.1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xextproto 7.1.2_0 >= xorg-xextproto
 7.1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-inputproto 2.0.1_0 exists in the ports tree
 :debug:main xorg-inputproto 2.0.1_0  is the latest installed
 :debug:main xorg-inputproto 2.0.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-inputproto 2.0.1_0 >= xorg-inputproto
 2.0.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXrandr 1.3.1_0 exists in the ports tree
 :debug:main xorg-libXrandr 1.3.1_0  is the latest installed
 :debug:main xorg-libXrandr 1.3.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXrandr 1.3.1_0 >= xorg-libXrandr
 1.3.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-randrproto 1.3.2_0 exists in the ports tree
 :debug:main xorg-randrproto 1.3.2_0  is the latest installed
 :debug:main xorg-randrproto 1.3.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 randrproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto
 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcursor 1.1.11_0 exists in the ports tree
 :debug:main xorg-libXcursor 1.1.11_0  is the latest installed
 :debug:main xorg-libXcursor 1.1.11_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcursor
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXcursor 1.1.11_0 >= xorg-
 libXcursor 1.1.11_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXfixes 4.0.5_0 exists in the ports tree
 :debug:main xorg-libXfixes 4.0.5_0  is the latest installed
 :debug:main xorg-libXfixes 4.0.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXfixes
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXfixes 4.0.5_0 >= xorg-libXfixes
 4.0.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-fixesproto 4.1.2_0 exists in the ports tree
 :debug:main xorg-fixesproto 4.1.2_0  is the latest installed
 :debug:main xorg-fixesproto 4.1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 fixesproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-fixesproto 4.1.2_0 >= xorg-fixesproto
 4.1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree
 :debug:main xorg-libXinerama 1.1.1_0  is the latest installed
 :debug:main xorg-libXinerama 1.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXinerama
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-
 libXinerama 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xineramaproto 1.2_0 exists in the ports tree
 :debug:main xorg-xineramaproto 1.2_0  is the latest installed
 :debug:main xorg-xineramaproto 1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xineramaproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-
 xineramaproto 1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
 :debug:main xorg-libXdamage 1.1.3_0  is the latest installed
 :debug:main xorg-libXdamage 1.1.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdamage
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage
 1.1.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-damageproto 1.2.1_0  is the latest installed
 :debug:main xorg-damageproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 damageproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-
 damageproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
 :debug:main xorg-libXcomposite 0.4.3_0  is the latest installed
 :debug:main xorg-libXcomposite 0.4.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcomposite
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
 libXcomposite 0.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
 :debug:main xorg-compositeproto 0.4.2_0  is the latest installed
 :debug:main xorg-compositeproto 0.4.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 compositeproto
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
 compositeproto 0.4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus-python26 0.83.2_0 exists in the ports tree
 :debug:main dbus-python26 0.83.2_0  is the latest installed
 :debug:main dbus-python26 0.83.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /dbus-python26
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! dbus-python26 0.83.2_0 >= dbus-python26
 0.83.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus-glib 0.92_0 exists in the ports tree
 :debug:main dbus-glib 0.92_0  is the latest installed
 :debug:main dbus-glib 0.92_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /dbus-glib
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! dbus-glib 0.92_0 >= dbus-glib 0.92_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main py26-gobject 2.26.0_1 exists in the ports tree
 :debug:main py26-gobject 2.26.0_1  is the latest installed
 :debug:main py26-gobject 2.26.0_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gobject
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! py26-gobject 2.26.0_1 >= py26-gobject
 2.26.0_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libffi 3.0.9_0 exists in the ports tree
 :debug:main libffi 3.0.9_0  is the latest installed
 :debug:main libffi 3.0.9_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libffi 3.0.9_0 >= libffi 3.0.9_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main py26-gtk 2.22.0_0 exists in the ports tree
 :debug:main py26-gtk 2.22.0_0  is the latest installed
 :debug:main py26-gtk 2.22.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gtk
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! py26-gtk 2.22.0_0 >= py26-gtk 2.22.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main py26-cairo 1.8.10_0 exists in the ports tree
 :debug:main py26-cairo 1.8.10_0  is the latest installed
 :debug:main py26-cairo 1.8.10_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-cairo
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! py26-cairo 1.8.10_0 >= py26-cairo 1.8.10_0
 :debug:main epoch: in tree: 20100319 installed: 20100319
 :debug:main py26-numpy 1.5.1_1 exists in the ports tree
 :debug:main py26-numpy 1.5.1_1 +atlas+gcc44 is the latest installed
 :debug:main py26-numpy 1.5.1_1 +atlas+gcc44 is active
 :debug:main Merging existing variants '+atlas+gcc44' into variants
 :debug:main new fully merged portvariants: gcc44 + atlas +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Executing variant atlas provides atlas
 :debug:main Executing variant gcc44 provides gcc44
 :debug:main No need to upgrade! py26-numpy 1.5.1_1 >= py26-numpy 1.5.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main fftw-3 3.2.2_0 exists in the ports tree
 :debug:main fftw-3 3.2.2_0 +i386 is the latest installed
 :debug:main fftw-3 3.2.2_0 +i386 is active
 :debug:main Merging existing variants '+i386' into variants
 :debug:main new fully merged portvariants: i386 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Requested variant i386 is not provided by port fftw-3.
 :debug:main Skipping upgrade since fftw-3 3.2.2_0 >= fftw-3 3.2.2_0, even
 though installed variants "+i386" do not match "".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main py26-nose 0.11.3_0 exists in the ports tree
 :debug:main py26-nose 0.11.3_0  is the latest installed
 :debug:main py26-nose 0.11.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! py26-nose 0.11.3_0 >= py26-nose 0.11.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main py26-distribute 0.6.14_0 exists in the ports tree
 :debug:main py26-distribute 0.6.14_0  is the latest installed
 :debug:main py26-distribute 0.6.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-distribute
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! py26-distribute 0.6.14_0 >=
 py26-distribute 0.6.14_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main gcc44 4.4.5_0 exists in the ports tree
 :debug:main gcc44 4.4.5_0  is the latest installed
 :debug:main gcc44 4.4.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc44
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gcc44 4.4.5_0 >= gcc44 4.4.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main atlas 3.8.3_4 exists in the ports tree
 :debug:main atlas 3.8.3_4 +gcc44 is the latest installed
 :debug:main atlas 3.8.3_4 +gcc44 is active
 :debug:main Merging existing variants '+gcc44' into variants
 :debug:main new fully merged portvariants: gcc44 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant gcc44 provides gcc44
 :debug:main No need to upgrade! atlas 3.8.3_4 >= atlas 3.8.3_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gzip 1.4_0 exists in the ports tree
 :debug:main gzip 1.4_0 +universal is the latest installed
 :debug:main gzip 1.4_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gzip 1.4_0 >= gzip 1.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main intltool 0.40.6_0 exists in the ports tree
 :debug:main intltool 0.40.6_0  is the latest installed
 :debug:main intltool 0.40.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5-xml-parser 2.40_0 exists in the ports tree
 :debug:main p5-xml-parser 2.40_0  is the latest installed
 :debug:main p5-xml-parser 2.40_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -xml-parser
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for configure.universal_args
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! p5-xml-parser 2.40_0 >= p5-xml-parser
 2.40_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5-getopt-long 2.38_0 exists in the ports tree
 :debug:main p5-getopt-long 2.38_0  is the latest installed
 :debug:main p5-getopt-long 2.38_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -getopt-long
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for configure.universal_args
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long
 2.38_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5-pathtools 3.33_0 exists in the ports tree
 :debug:main p5-pathtools 3.33_0  is the latest installed
 :debug:main p5-pathtools 3.33_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for configure.universal_args
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! p5-pathtools 3.33_0 >= p5-pathtools 3.33_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5-scalar-list-utils 1.23_0 exists in the ports tree
 :debug:main p5-scalar-list-utils 1.23_0  is the latest installed
 :debug:main p5-scalar-list-utils 1.23_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -scalar-list-utils
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for configure.universal_args
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! p5-scalar-list-utils 1.23_0 >= p5-scalar-
 list-utils 1.23_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main qca 2.0.2_6 exists in the ports tree
 :debug:main qca 2.0.2_6  is the latest installed
 :debug:main qca 2.0.2_6  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qca
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! qca 2.0.2_6 >= qca 2.0.2_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbusmenu-qt 0.6.2_2 exists in the ports tree
 :debug:main dbusmenu-qt 0.6.2_2  is the latest installed
 :debug:main dbusmenu-qt 0.6.2_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /dbusmenu-qt
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! dbusmenu-qt 0.6.2_2 >= dbusmenu-qt 0.6.2_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main qjson 0.7.1_1 exists in the ports tree
 :debug:main qjson 0.7.1_1  is the latest installed
 :debug:main qjson 0.7.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qjson
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! qjson 0.7.1_1 >= qjson 0.7.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main docbook-xml 5.0_0 exists in the ports tree
 :debug:main docbook-xml 5.0_0  is the latest installed
 :debug:main docbook-xml 5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
 :debug:main docbook-xml-4.1.2 4.1.2_1  is the latest installed
 :debug:main docbook-xml-4.1.2 4.1.2_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.1.2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-
 xml-4.1.2 4.1.2_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xmlcatmgr 2.2_1 exists in the ports tree
 :debug:main xmlcatmgr 2.2_1  is the latest installed
 :debug:main xmlcatmgr 2.2_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main docbook-xml-4.2 4.2_0 exists in the ports tree
 :debug:main docbook-xml-4.2 4.2_0  is the latest installed
 :debug:main docbook-xml-4.2 4.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2
 4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main docbook-xml-4.3 4.3_0 exists in the ports tree
 :debug:main docbook-xml-4.3 4.3_0  is the latest installed
 :debug:main docbook-xml-4.3 4.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.3
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3
 4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main docbook-xml-4.4 4.4_0 exists in the ports tree
 :debug:main docbook-xml-4.4 4.4_0  is the latest installed
 :debug:main docbook-xml-4.4 4.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.4
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4
 4.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main docbook-xml-4.5 4.5_0 exists in the ports tree
 :debug:main docbook-xml-4.5 4.5_0  is the latest installed
 :debug:main docbook-xml-4.5 4.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.5
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5
 4.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main docbook-xml-5.0 5.0_0 exists in the ports tree
 :debug:main docbook-xml-5.0 5.0_0  is the latest installed
 :debug:main docbook-xml-5.0 5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-5.0
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0
 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main docbook-xsl 1.76.1_0 exists in the ports tree
 :debug:main docbook-xsl 1.76.1_0  is the latest installed
 :debug:main docbook-xsl 1.76.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xsl
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! docbook-xsl 1.76.1_0 >= docbook-xsl
 1.76.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main grantlee 0.1.6_1 exists in the ports tree
 :debug:main grantlee 0.1.6_1  is the latest installed
 :debug:main grantlee 0.1.6_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/grantlee
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! grantlee 0.1.6_1 >= grantlee 0.1.6_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main shared-desktop-ontologies 0.5_1 exists in the ports tree
 :debug:main shared-desktop-ontologies 0.5_1  is the latest installed
 :debug:main shared-desktop-ontologies 0.5_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde
 /shared-desktop-ontologies
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! shared-desktop-ontologies 0.5_1 >= shared-
 desktop-ontologies 0.5_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main qimageblitz 0.0.6_0 exists in the ports tree
 :debug:main qimageblitz 0.0.6_0  is the latest installed
 :debug:main qimageblitz 0.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/qimageblitz
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! qimageblitz 0.0.6_0 >= qimageblitz 0.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main oxygen-icons 4.5.86svn1205247_0 exists in the ports tree
 :debug:main oxygen-icons 4.5.86svn1205247_0  is the latest installed
 :debug:main oxygen-icons 4.5.86svn1205247_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde
 /oxygen-icons
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! oxygen-icons 4.5.86svn1205247_0 >= oxygen-
 icons 4.5.86svn1205247_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
 :debug:main hicolor-icon-theme 0.12_0  is the latest installed
 :debug:main hicolor-icon-theme 0.12_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /hicolor-icon-theme
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-
 theme 0.12_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main exiv2 0.21_0 exists in the ports tree
 :debug:main exiv2 0.21_0  is the latest installed
 :debug:main exiv2 0.21_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exiv2
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! exiv2 0.21_0 >= exiv2 0.21_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main openslp 1.2.1_2 exists in the ports tree
 :debug:main openslp 1.2.1_2  is the latest installed
 :debug:main openslp 1.2.1_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openslp
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! openslp 1.2.1_2 >= openslp 1.2.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bison 2.4.3_0 exists in the ports tree
 :debug:main bison 2.4.3_0 +universal is the latest installed
 :debug:main bison 2.4.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! bison 2.4.3_0 >= bison 2.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main m4 1.4.15_2 exists in the ports tree
 :debug:main m4 1.4.15_2 +universal is the latest installed
 :debug:main m4 1.4.15_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! m4 1.4.15_2 >= m4 1.4.15_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libqalculate 0.9.7_0 exists in the ports tree
 :debug:main libqalculate 0.9.7_0  is the latest installed
 :debug:main libqalculate 0.9.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/libqalculate
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libqalculate 0.9.7_0 >= libqalculate
 0.9.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cln 1.3.1_0 exists in the ports tree
 :debug:main cln 1.3.1_0  is the latest installed
 :debug:main cln 1.3.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/cln
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! cln 1.3.1_0 >= cln 1.3.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xmms 1.2.11_0 exists in the ports tree
 :debug:main xmms 1.2.11_0  is the latest installed
 :debug:main xmms 1.2.11_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/xmms
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xmms 1.2.11_0 >= xmms 1.2.11_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main glib1 1.2.10_6 exists in the ports tree
 :debug:main glib1 1.2.10_6  is the latest installed
 :debug:main glib1 1.2.10_6  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib1
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! glib1 1.2.10_6 >= glib1 1.2.10_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gtk1 1.2.10_9 exists in the ports tree
 :debug:main gtk1 1.2.10_9  is the latest installed
 :debug:main gtk1 1.2.10_9  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk1
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gtk1 1.2.10_9 >= gtk1 1.2.10_9
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXt 1.0.9_0 exists in the ports tree
 :debug:main xorg-libXt 1.0.9_0  is the latest installed
 :debug:main xorg-libXt 1.0.9_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXt
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXt 1.0.9_0 >= xorg-libXt 1.0.9_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main esound 0.2.41_1 exists in the ports tree
 :debug:main esound 0.2.41_1  is the latest installed
 :debug:main esound 0.2.41_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/esound
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! esound 0.2.41_1 >= esound 0.2.41_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main audiofile 0.2.7_0 exists in the ports tree
 :debug:main audiofile 0.2.7_0  is the latest installed
 :debug:main audiofile 0.2.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/audiofile
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! audiofile 0.2.7_0 >= audiofile 0.2.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libvorbis 1.3.2_0 exists in the ports tree
 :debug:main libvorbis 1.3.2_0  is the latest installed
 :debug:main libvorbis 1.3.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libvorbis 1.3.2_0 >= libvorbis 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libogg 1.2.2_0 exists in the ports tree
 :debug:main libogg 1.2.2_0  is the latest installed
 :debug:main libogg 1.2.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libogg 1.2.2_0 >= libogg 1.2.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libmikmod 3.2.0-beta2_1 exists in the ports tree
 :debug:main libmikmod 3.2.0-beta2_1  is the latest installed
 :debug:main libmikmod 3.2.0-beta2_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libmikmod
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libmikmod 3.2.0-beta2_1 >= libmikmod
 3.2.0-beta2_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main kdepimlibs4 4.5.4_0 exists in the ports tree
 :debug:main kdepimlibs4 4.5.4_0  is the latest installed
 :debug:main kdepimlibs4 4.5.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdepimlibs4
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! kdepimlibs4 4.5.4_0 >= kdepimlibs4 4.5.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main akonadi 1.4.0_1 exists in the ports tree
 :debug:main akonadi 1.4.0_1  is the latest installed
 :debug:main akonadi 1.4.0_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/akonadi
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
 :debug:main Re-registering default for configure.dir
 :debug:main Re-registering default for build.dir
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! akonadi 1.4.0_1 >= akonadi 1.4.0_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main boost 1.45.0_2 exists in the ports tree
 :debug:main boost 1.45.0_2  is the latest installed
 :debug:main boost 1.45.0_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! boost 1.45.0_2 >= boost 1.45.0_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main icu 4.6_0 exists in the ports tree
 :debug:main icu 4.6_0  is the latest installed
 :debug:main icu 4.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! icu 4.6_0 >= icu 4.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main mysql5-server 5.1.53_0 exists in the ports tree
 :debug:main mysql5-server 5.1.53_0  is the latest installed
 :debug:main mysql5-server 5.1.53_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/mysql5-server
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! mysql5-server 5.1.53_0 >= mysql5-server
 5.1.53_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main mysql5 5.1.53_0 exists in the ports tree
 :debug:main mysql5 5.1.53_0  is the latest installed
 :debug:main mysql5 5.1.53_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/mysql5
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! mysql5 5.1.53_0 >= mysql5 5.1.53_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libical 0.43_1 exists in the ports tree
 :debug:main libical 0.43_1  is the latest installed
 :debug:main libical 0.43_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libical
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libical 0.43_1 >= libical 0.43_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main openldap 2.4.21_3 exists in the ports tree
 :debug:main openldap 2.4.21_3  is the latest installed
 :debug:main openldap 2.4.21_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/openldap
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! openldap 2.4.21_3 >= openldap 2.4.21_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gpgme 1.3.0_0 exists in the ports tree
 :debug:main gpgme 1.3.0_0  is the latest installed
 :debug:main gpgme 1.3.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gpgme
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gpgme 1.3.0_0 >= gpgme 1.3.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gnupg 1.4.11_0 exists in the ports tree
 :debug:main gnupg 1.4.11_0  is the latest installed
 :debug:main gnupg 1.4.11_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/gnupg
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gnupg 1.4.11_0 >= gnupg 1.4.11_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libusb-compat 0.1.3_0 exists in the ports tree
 :debug:main libusb-compat 0.1.3_0  is the latest installed
 :debug:main libusb-compat 0.1.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libusb-compat
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libusb-compat 0.1.3_0 >= libusb-compat
 0.1.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libusb 1.0.8_0 exists in the ports tree
 :debug:main libusb 1.0.8_0  is the latest installed
 :debug:main libusb 1.0.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libusb 1.0.8_0 >= libusb 1.0.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main pth 2.0.7_0 exists in the ports tree
 :debug:main pth 2.0.7_0  is the latest installed
 :debug:main pth 2.0.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pth
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! pth 2.0.7_0 >= pth 2.0.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgpg-error 1.10_0 exists in the ports tree
 :debug:main libgpg-error 1.10_0  is the latest installed
 :debug:main libgpg-error 1.10_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libgpg-error
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libassuan 2.0.1_1 exists in the ports tree
 :debug:main libassuan 2.0.1_1  is the latest installed
 :debug:main libassuan 2.0.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libassuan
 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libassuan 2.0.1_1 >= libassuan 2.0.1_1
 :msg:main --->  Computing dependencies for kdebase4-workspace:info:main
 .:debug:main Searching for dependency: cmake
 :debug:main Found Dependency: receipt exists for cmake
 :debug:main Searching for dependency: pkgconfig
 :debug:main Found Dependency: receipt exists for pkgconfig
 :debug:main Searching for dependency: automoc
 :debug:main Found Dependency: receipt exists for automoc
 :debug:main Searching for dependency: qt4-mac
 :debug:main Found Dependency: receipt exists for qt4-mac
 :debug:main Searching for dependency: phonon
 :debug:main Found Dependency: receipt exists for phonon
 :debug:main Searching for dependency: kdebase4-runtime
 :debug:main Found Dependency: receipt exists for kdebase4-runtime
 :debug:main Searching for dependency: qimageblitz
 :debug:main Found Dependency: receipt exists for qimageblitz
 :debug:main Searching for dependency: libqalculate
 :debug:main Found Dependency: receipt exists for libqalculate
 :debug:main Searching for dependency: xmms
 :debug:main Found Dependency: receipt exists for xmms
 :debug:main Searching for dependency: kdepimlibs4
 :debug:main Found Dependency: receipt exists for kdepimlibs4
 :msg:main
 :debug:main Executing org.macports.main (kdebase4-workspace)
 :msg:main --->  Fetching kdebase4-workspace
 :debug:fetch fetch phase started at Sat Jan  8 21:09:37 PST 2011
 :debug:fetch Executing org.macports.fetch (kdebase4-workspace)
 :msg:fetch --->  Verifying checksum(s) for kdebase4-workspace
 :debug:checksum checksum phase started at Sat Jan  8 21:09:37 PST 2011
 :debug:checksum Executing org.macports.checksum (kdebase4-workspace)
 :info:checksum --->  Checksumming kdebase-workspace-4.5.2.tar.bz2
 :debug:checksum Correct (sha1) checksum for kdebase-
 workspace-4.5.2.tar.bz2
 :debug:checksum Correct (rmd160) checksum for kdebase-
 workspace-4.5.2.tar.bz2
 :debug:checksum setting option extract.cmd to /usr/bin/bzip2
 :msg:checksum --->  Extracting kdebase4-workspace
 :debug:extract extract phase started at Sat Jan  8 21:09:39 PST 2011
 :debug:extract Executing proc-pre-org.macports.extract-extract-0
 :debug:extract Executing org.macports.extract (kdebase4-workspace)
 :info:extract --->  Extracting kdebase-workspace-4.5.2.tar.bz2
 :debug:extract setting option extract.args to
 '/opt/local/var/macports/distfiles/kdebase4-workspace/kdebase-
 workspace-4.5.2.tar.bz2'
 :debug:extract Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:extract Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work"
 && /usr/bin/bzip2 -dc
 '/opt/local/var/macports/distfiles/kdebase4-workspace/kdebase-
 workspace-4.5.2.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -'
 :debug:extract Executing proc-post-org.macports.extract-extract-0
 :debug:extract Executing proc-post-org.macports.extract-extract-1
 :debug:patch patch phase started at Sat Jan  8 21:11:06 PST 2011
 :debug:patch Executing org.macports.patch (kdebase4-workspace)
 :msg:patch --->  Configuring kdebase4-workspace
 :debug:patch Using compiler 'Mac OS X gcc 4.2'
 :debug:configure configure phase started at Sat Jan  8 21:11:06 PST 2011
 :debug:configure Executing proc-pre-org.macports.configure-configure-0
 :debug:configure Executing org.macports.configure (kdebase4-workspace)
 :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch
 x86_64' CXXFLAGS='-O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib'
 MACOSX_DEPLOYMENT_TARGET='10.6' PKG_CONFIG_PATH='/opt/local/lib/pkgconfig'
 CXX='/usr/bin/g++-4.2'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work/.CC_PRINT_OPTIONS'
 F90FLAGS='-O2 -m64' LDFLAGS='-arch x86_64' FCFLAGS='-O2 -m64'
 OBJC='/usr/bin/gcc-4.2' INSTALL='/usr/bin/install -c'
 MOC='/opt/local/bin/moc' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64'
 QTDIR='/opt/local' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
 QMAKE='/opt/local/bin/qmake'
 :debug:configure Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work/build"
 && cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON
 -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release
 -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON
 -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib
 -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr"
 -DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev
 -DBUILD_doc=OFF -DBUILD_SHARED_LIBS=ON
 -DBUNDLE_INSTALL_DIR=/Applications/MacPorts/KDE4
 -DKDE_DISTRIBUTION_TEXT="MacPorts/Mac OS X"
 -DQT_QT_INCLUDE_DIR=/opt/local/include
 -DQT_ZLIB_LIBRARY=/opt/local/lib/libz.dylib
 -DQT_PNG_LIBRARY=/opt/local/lib/libpng.dylib
 -DDOCBOOKXSL_DIR=/opt/local/share/xsl/docbook-xsl
 -DGETTEXT_INCLUDE_DIR=/opt/local/include
 -DGETTEXT_LIBRARY=/opt/local/libgettextlib.dylib
 -DGIF_INCLUDE_DIR=/opt/local/include -DGIF_LIBRARY=/opt/local/libgif.dylib
 -DJASPER_INCLUDE_DIR=/opt/local/include
 -DJASPER_LIBRARY=/opt/local/lib/libjasper.dylib
 -DJPEG_INCLUDE_DIR=/opt/local/include
 -DJPEG_LIBRARY=/opt/local/lib/libjpeg.dylib
 -DLBER_LIBRARIES=/opt/local/lib/liblber.dylib
 -DLDAP_INCLUDE_DIR=/opt/local/include
 -DLDAP_LIBRARIES=/opt/local/lib/libldap.dylib
 -DLIBEXSLT_INCLUDE_DIR=/opt/local/include
 -DLIBEXSLT_LIBRARIES=/opt/local/lib/libexslt.dylib
 -DLIBINTL_INCLUDE_DIR=/opt/local/include
 -DLIBINTL_LIBRARY=/opt/local/lib/libintl.dylib
 -DLIBXSLT_INCLUDE_DIR=/opt/local/include
 -DLIBXSLT_LIBRARIES=/opt/local/lib/libxslt.dylib
 -DMYSQLD_EXECUTABLE=/opt/local/libexec/mysqld
 -DMYSQL_INCLUDE_DIR=/opt/local/include/mysql5/mysql
 -DMYSQL_LIB_DIR=/opt/local/lib/mysql5/mysql
 -DMYSQLCONFIG_EXECUTABLE=/opt/local/bin/mysql_config5
 -DPNG_INCLUDE_DIR=/opt/local/include
 -DPNG_PNG_INCLUDE_DIR=/opt/local/include
 -DPNG_LIBRARY=/opt/local/lib/libpng.dylib
 -DQCA2_INCLUDE_DIR=/opt/local/include/QtCrypto
 -DQCA2_LIBRARIES=/opt/local/lib/libqca.dylib
 -DTIFF_INCLUDE_DIR=/opt/local/include
 -DTIFF_LIBRARY=/opt/local/lib/libtiff.dylib
 -DCMAKE_OSX_ARCHITECTURES="x86_64" ../kdebase-workspace-4.5.2'
 :info:configure -- The C compiler identification is GNU
 :info:configure -- The CXX compiler identification is GNU
 :info:configure -- Checking whether C compiler has -isysroot
 :info:configure -- Checking whether C compiler has -isysroot - yes
 :info:configure -- Checking whether C compiler supports OSX deployment
 target flag
 :info:configure -- Checking whether C compiler supports OSX deployment
 target flag - yes
 :info:configure -- Check for working C compiler: /usr/bin/gcc-4.2
 :info:configure -- Check for working C compiler: /usr/bin/gcc-4.2 -- works
 :info:configure -- Detecting C compiler ABI info
 :info:configure -- Detecting C compiler ABI info - done
 :info:configure -- Checking whether CXX compiler has -isysroot
 :info:configure -- Checking whether CXX compiler has -isysroot - yes
 :info:configure -- Checking whether CXX compiler supports OSX deployment
 target flag
 :info:configure -- Checking whether CXX compiler supports OSX deployment
 target flag - yes
 :info:configure -- Check for working CXX compiler: /usr/bin/g++-4.2
 :info:configure -- Check for working CXX compiler: /usr/bin/g++-4.2 --
 works
 :info:configure -- Detecting CXX compiler ABI info
 :info:configure -- Detecting CXX compiler ABI info - done
 :info:configure -- Looking for Q_WS_X11
 :info:configure -- Looking for Q_WS_X11 - not found.
 :info:configure -- Looking for Q_WS_WIN
 :info:configure -- Looking for Q_WS_WIN - not found.
 :info:configure -- Looking for Q_WS_QWS
 :info:configure -- Looking for Q_WS_QWS - not found.
 :info:configure -- Looking for Q_WS_MAC
 :info:configure -- Looking for Q_WS_MAC - found
 :info:configure -- Looking for QT_MAC_USE_COCOA
 :info:configure -- Looking for QT_MAC_USE_COCOA - found
 :info:configure -- Found Qt-Version 4.7.1
 :info:configure --  -> QT_QMAKE_EXECUTABLE is /opt/local/bin/qmake
 :info:configure --  -> QT_INCLUDE_DIR is /opt/local/include
 :info:configure --  -> QT_QTCORE_INCLUDE_DIR is /opt/local/include/QtCore
 :info:configure --  -> QT_BINARY_DIR is /opt/local/bin
 :info:configure --  -> QT_LIBRARY_DIR is /opt/local/lib
 :info:configure --  -> QT_PLUGINS_DIR is /opt/local/share/qt4/plugins
 :info:configure --  -> QT_MKSPECS_DIR is /opt/local/share/qt4/mkspecs
 :info:configure -- Looking for include files CMAKE_HAVE_PTHREAD_H
 :info:configure -- Looking for include files CMAKE_HAVE_PTHREAD_H - found
 :info:configure -- Looking for pthread_create in pthreads
 :info:configure -- Looking for pthread_create in pthreads - not found
 :info:configure -- Looking for pthread_create in pthread
 :info:configure -- Looking for pthread_create in pthread - found
 :info:configure -- Found Threads: TRUE
 :info:configure -- Found OpenSSL: /opt/local/lib/libssl.dylib
 :info:configure -- Found Automoc4: /opt/local/bin/automoc4
 :info:configure -- Found Perl: /opt/local/bin/perl
 :info:configure -- Phonon Version: 4.4.2
 :info:configure -- Found Phonon: /opt/local/lib/libphonon.dylib
 :info:configure -- Found Phonon Includes:
 /opt/local/include/KDE;/opt/local/include
 :info:configure -- Performing Test _OFFT_IS_64BIT
 :info:configure -- Performing Test _OFFT_IS_64BIT - Success
 :info:configure -- Performing Test HAVE_FPIE_SUPPORT
 :info:configure -- Performing Test HAVE_FPIE_SUPPORT - Success
 :info:configure -- Performing Test __KDE_HAVE_W_OVERLOADED_VIRTUAL
 :info:configure -- Performing Test __KDE_HAVE_W_OVERLOADED_VIRTUAL -
 Success
 :info:configure -- Performing Test __KDE_HAVE_GCC_VISIBILITY
 :info:configure -- Performing Test __KDE_HAVE_GCC_VISIBILITY - Success
 :info:configure -- Found KDE 4.5 include dir: /opt/local/include
 :info:configure -- Found KDE 4.5 library dir: /opt/local/lib
 :info:configure -- Found the KDE4 kconfig_compiler preprocessor:
 /opt/local/bin/kconfig_compiler
 :info:configure -- Found automoc4: /opt/local/bin/automoc4
 :info:configure -- Strigi API needs 'signed char'
 :info:configure -- Found Strigi: /opt/local/lib/libstreams.dylib
 :info:configure -- Found QImageBlitz: /opt/local/include/qimageblitz
 :info:configure -- Found ZLIB: /opt/local/include (found version "1.2.5")
 :info:configure -- Found DBusMenuQt: /opt/local/lib/libdbusmenu-qt.dylib
 :info:configure -- Found GLIB2: /opt/local/lib/libglib-2.0.dylib
 :info:configure -- Found Fontconfig: /opt/local/lib/libfontconfig.dylib
 :info:configure -- Could NOT find Googlegadgets  (missing:
 GOOGLEGADGETS_LIBRARIES GOOGLEGADGETS_INCLUDE_DIRS)
 :info:configure -- checking for modules 'qzion>=0.4.0;qedje>=0.4.0'
 :info:configure --   package 'qzion>=0.4.0' not found
 :info:configure --   package 'qedje>=0.4.0' not found
 :info:configure -- Could not find QZion and/or QEdje. Please download them
 here (http://code.openbossa.org/projects/qedje/pages/Home).
 :info:configure -- Could NOT find QEdje  (missing:  QEDJE_LIBRARIES
 QEDJE_INCLUDE_DIRS)
 :info:configure -- Found PythonInterp: /opt/local/bin/python2.7
 :info:configure -- Found Python executable: /opt/local/bin/python2.7
 :info:configure -- Found Python version: 2.7.1
 :info:configure -- Found Python library: -framework Python
 :info:configure -- Found SIP version: 4.12
 :info:configure -- Found PyQt4 version: 4.8.2
 :info:configure Traceback (most recent call last):
 :info:configure   File
 "/opt/local/share/apps/cmake/modules/FindPyKDE4.py", line 8, in <module>
 :info:configure     import PyKDE4.pykdeconfig
 :info:configure ImportError: No module named PyKDE4.pykdeconfig
 :info:configure -- Found Soprano: /opt/local/include
 :info:configure -- Found SharedDesktopOntologies:
 /opt/local/share/ontology
 :info:configure -- Found Nepomuk: /opt/local/lib/libnepomuk.dylib
 :info:configure -- Could NOT find PolkitQt  (missing:
 POLKITQT_INCLUDE_DIR POLKITQT_GUI_LIBRARY POLKITQT_CORE_LIBRARY)
 :info:configure -- Performing Test PAM_MESSAGE_CONST
 :info:configure -- Performing Test PAM_MESSAGE_CONST - Success
 :info:configure -- Found PAM: /usr/lib/libpam.dylib;/usr/lib/libdl.dylib
 :info:configure -- Looking for getspnam
 :info:configure -- Looking for getspnam - not found
 :info:configure -- Looking for getspnam
 :info:configure -- Looking for getspnam - not found
 :info:configure -- Looking for getspnam
 :info:configure -- Looking for getspnam - not found
 :info:configure -- Looking for crypt in crypt
 :info:configure -- Looking for crypt in crypt - not found
 :info:configure -- Looking for XkbLockModifiers in X11
 :info:configure -- Looking for XkbLockModifiers in X11 - found
 :info:configure -- Looking for getpassphrase
 :info:configure -- Looking for getpassphrase - not found
 :info:configure -- Looking for vsyslog
 :info:configure -- Looking for vsyslog - found
 :info:configure -- Looking for statvfs
 :info:configure -- Looking for statvfs - found
 :info:configure -- Looking for include files HAVE_LIMITS_H
 :info:configure -- Looking for include files HAVE_LIMITS_H - found
 :info:configure -- Looking for include files HAVE_SYS_TIME_H
 :info:configure -- Looking for include files HAVE_SYS_TIME_H - found
 :info:configure -- Looking for include files HAVE_STDINT_H
 :info:configure -- Looking for include files HAVE_STDINT_H - found
 :info:configure -- Looking for include files HAVE_SYS_VFS_H
 :info:configure -- Looking for include files HAVE_SYS_VFS_H - not found.
 :info:configure -- Looking for include files HAVE_SYS_STATVFS_H
 :info:configure -- Looking for include files HAVE_SYS_STATVFS_H - found
 :info:configure -- Looking for include files HAVE_SYS_PARAM_H
 :info:configure -- Looking for include files HAVE_SYS_PARAM_H - found
 :info:configure -- Looking for include files HAVE_SYS_MOUNT_H
 :info:configure -- Looking for include files HAVE_SYS_MOUNT_H - found
 :info:configure -- Looking for include files HAVE_SYS_STATFS_H
 :info:configure -- Looking for include files HAVE_SYS_STATFS_H - not
 found.
 :info:configure -- Looking for statfs
 :info:configure -- Looking for statfs - found
 :info:configure -- Looking for sys/types.h
 :info:configure -- Looking for sys/types.h - found
 :info:configure -- Looking for stddef.h
 :info:configure -- Looking for stddef.h - found
 :info:configure -- Check size of struct ucred
 :info:configure -- Check size of struct ucred - failed
 :info:configure -- Looking for getpeereid
 :info:configure -- Looking for getpeereid - found
 :info:configure -- Looking for setpriority
 :info:configure -- Looking for setpriority - found
 :info:configure -- checking for module 'xrandr>=1.2'
 :info:configure --   found xrandr, version 1.3.1
 :info:configure -- Found Qt-Version 4.7.1 (using /opt/local/bin/qmake)
 :info:configure -- Looking for include files HAVE_SYS_ENDIAN_H
 :info:configure -- Looking for include files HAVE_SYS_ENDIAN_H - not
 found.
 :info:configure -- Looking for include files HAVE_BYTESWAP_H
 :info:configure -- Looking for include files HAVE_BYTESWAP_H - not found.
 :info:configure -- Looking for include files HAVE_PATHS_H
 :info:configure -- Looking for include files HAVE_PATHS_H - found
 :info:configure -- Looking for _IceTransNoListen in ICE
 :info:configure -- Looking for _IceTransNoListen in ICE - found
 :info:configure -- Performing Test HAVE_MMMX
 :info:configure -- Performing Test HAVE_MMMX - Success
 :info:configure -- Found PNG: /opt/local/lib/libpng.dylib
 :info:configure -- Found JPEG: /opt/local/lib/libjpeg.dylib
 :info:configure -- Performing Test X86_MMX_FOUND
 :info:configure -- Performing Test X86_MMX_FOUND - Success
 :info:configure -- Could NOT find Sensors  (missing:  SENSORS_INCLUDE_DIR
 SENSORS_LIBRARIES)
 :info:configure -- Looking for include files SYS_INOTIFY_H_FOUND
 :info:configure -- Looking for include files SYS_INOTIFY_H_FOUND - not
 found.
 :info:configure CMake Error at ksysguard/ksysguardd/CMakeLists.txt:33
 (add_subdirectory):
 :info:configure   add_subdirectory given source "Darwin" which is not an
 existing directory.
 :info:configure
 :info:configure
 :info:configure -- Looking for XF86MiscSetGrabKeysState in Xxf86misc
 :info:configure -- Looking for XF86MiscSetGrabKeysState in Xxf86misc -
 found
 :info:configure -- Looking for glXChooseVisual in GL
 :info:configure -- Looking for glXChooseVisual in GL - found
 :info:configure -- checking for one of the modules 'NetworkManager'
 :info:configure -- checking for one of the modules 'libnm-util'
 :info:configure -- Could NOT find BlueZ  (missing:  BLUEZ_INCLUDE_DIR
 BLUEZ_LIBRARIES)
 :info:configure -- Looking for XScreenSaverQueryInfo in Xss
 :info:configure -- Looking for XScreenSaverQueryInfo in Xss - found
 :info:configure -- Could NOT find libgps  (missing:  LIBGPS_INCLUDE_DIR
 LIBGPS_LIBRARIES)
 :info:configure -- Found Xmms: /opt/local/lib/libxmms.dylib
 :info:configure -- Found XMMS: the nowplaying dataengine will support XMMS
 1.x
 :info:configure -- Found KdepimLibs:
 /opt/local/lib/cmake/KdepimLibs/KdepimLibsConfig.cmake
 :info:configure -- Boost version: 1.45.0
 :info:configure -- Found Akonadi:
 /opt/local/lib/cmake/Akonadi/AkonadiConfig.cmake
 :info:configure -- Found Qalculate: -L/opt/local/lib -lcln -lgmp
 -lqalculate -lglib-2.0 -lintl -lxml2 -lpthread -lz -liconv -lm
 :info:configure -- Found Freetype: -L/opt/local/lib -lfreetype -lz
 :info:configure -- Found LIBUSB: /opt/local/lib/libusb.dylib
 :info:configure /opt/local/share/dbus-1/interfaces
 :info:configure -- Xau lib or Xdmcp lib was missing. kdm will not compile
 :info:configure
 :info:configure
 -----------------------------------------------------------------------------
 :info:configure -- The following external packages were located on your
 system.
 :info:configure -- This installation will have the extra features provided
 by these packages.
 :info:configure
 -----------------------------------------------------------------------------
 :info:configure    * DBusMenuQt - API to import export QMenu instance
 using DBusMenu protocol
 :info:configure    * glib2 - Low-level core library for data structure
 handling, portability wrappers, etc.
 :info:configure    * Soprano - Semantic Desktop Storing
 :info:configure    * Shared desktop ontologies - Desktop ontologies
 :info:configure    * Nepomuk - Nepomuk Libraries
 :info:configure    * XMMS - X MultiMedia System development libraries
 :info:configure    * kdepimlibs - KDE PIM libraries
 :info:configure    * Qalculate! - Qalculate Library
 :info:configure    * Soprano - Semantic Desktop Storing
 :info:configure    * FreeType - A font rendering engine
 :info:configure    * libusb - User level access to USB devices
 :info:configure
 :info:configure
 -----------------------------------------------------------------------------
 :info:configure -- The following OPTIONAL packages could NOT be located on
 your system.
 :info:configure -- Consider installing them to enable more features from
 this software.
 :info:configure
 -----------------------------------------------------------------------------
 :info:configure    * GoogleGadgets (0.11.0 or higher)
 <http://code.google.com/p/google-gadgets-for-linux/>
 :info:configure      Google Gadgets library
 :info:configure      Needed to build plasma scriptengine for google
 gadgets
 :info:configure    * QEdje
 <http://code.openbossa.org/projects/qedje/pages/Home>
 :info:configure      QEdje library
 :info:configure      Needed to build plasma scriptengine for edje files
 :info:configure    * Polkit-Qt  <kdesupport>
 :info:configure      Qt Wrapper around PolicyKit
 :info:configure      Required to build PolicyKit-KDE
 :info:configure    * Compositing support  <http://www.x.org/>
 :info:configure      X11 Compositing support
 :info:configure      XComposite and XDamage extensions and OpenGL or
 XRender with XFixes are required for KWin compositing support
 :info:configure    * lm-sensors  <http://www.lm-sensors.org>
 :info:configure      Sensors support for ksysguard
 :info:configure    * libxss  <http://www.x.org/>
 :info:configure      XScreenSaver Library
 :info:configure      Needed to enable screensaver status check
 :info:configure    * BlueZ  <http://www.bluez.org>
 :info:configure      BlueZ is the Linux Bluetooth protocol stack
 :info:configure      For Bluetooth support in KDE
 :info:configure    * NetworkManager (0.6.5 or higher)
 <http://www.gnome.org/projects/NetworkManager>
 :info:configure      A daemon for user controlled networking
 :info:configure      Needed for building Network Management support in
 Solid.
 :info:configure    * libgps  <http://gpsd.berlios.de/>
 :info:configure      GPS support for geolocation
 :info:configure    * libxft  <http://www.x.org>
 :info:configure      X FreeType interface library
 :info:configure      Font installer and font previews
 :info:configure
 :info:configure
 -----------------------------------------------------------------------------
 :info:configure
 :info:configure -- Configuring incomplete, errors occurred!
 :info:configure shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work/build"
 && cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON
 -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release
 -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON
 -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib
 -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr"
 -DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev
 -DBUILD_doc=OFF -DBUILD_SHARED_LIBS=ON
 -DBUNDLE_INSTALL_DIR=/Applications/MacPorts/KDE4
 -DKDE_DISTRIBUTION_TEXT="MacPorts/Mac OS X"
 -DQT_QT_INCLUDE_DIR=/opt/local/include
 -DQT_ZLIB_LIBRARY=/opt/local/lib/libz.dylib
 -DQT_PNG_LIBRARY=/opt/local/lib/libpng.dylib
 -DDOCBOOKXSL_DIR=/opt/local/share/xsl/docbook-xsl
 -DGETTEXT_INCLUDE_DIR=/opt/local/include
 -DGETTEXT_LIBRARY=/opt/local/libgettextlib.dylib
 -DGIF_INCLUDE_DIR=/opt/local/include -DGIF_LIBRARY=/opt/local/libgif.dylib
 -DJASPER_INCLUDE_DIR=/opt/local/include
 -DJASPER_LIBRARY=/opt/local/lib/libjasper.dylib
 -DJPEG_INCLUDE_DIR=/opt/local/include
 -DJPEG_LIBRARY=/opt/local/lib/libjpeg.dylib
 -DLBER_LIBRARIES=/opt/local/lib/liblber.dylib
 -DLDAP_INCLUDE_DIR=/opt/local/include
 -DLDAP_LIBRARIES=/opt/local/lib/libldap.dylib
 -DLIBEXSLT_INCLUDE_DIR=/opt/local/include
 -DLIBEXSLT_LIBRARIES=/opt/local/lib/libexslt.dylib
 -DLIBINTL_INCLUDE_DIR=/opt/local/include
 -DLIBINTL_LIBRARY=/opt/local/lib/libintl.dylib
 -DLIBXSLT_INCLUDE_DIR=/opt/local/include
 -DLIBXSLT_LIBRARIES=/opt/local/lib/libxslt.dylib
 -DMYSQLD_EXECUTABLE=/opt/local/libexec/mysqld
 -DMYSQL_INCLUDE_DIR=/opt/local/include/mysql5/mysql
 -DMYSQL_LIB_DIR=/opt/local/lib/mysql5/mysql
 -DMYSQLCONFIG_EXECUTABLE=/opt/local/bin/mysql_config5
 -DPNG_INCLUDE_DIR=/opt/local/include
 -DPNG_PNG_INCLUDE_DIR=/opt/local/include
 -DPNG_LIBRARY=/opt/local/lib/libpng.dylib
 -DQCA2_INCLUDE_DIR=/opt/local/include/QtCrypto
 -DQCA2_LIBRARIES=/opt/local/lib/libqca.dylib
 -DTIFF_INCLUDE_DIR=/opt/local/include
 -DTIFF_LIBRARY=/opt/local/lib/libtiff.dylib
 -DCMAKE_OSX_ARCHITECTURES="x86_64" ../kdebase-workspace-4.5.2 " returned
 error 1
 :error:configure Target org.macports.configure returned: configure
 failure: shell command failed (see log for details)
 :debug:configure Backtrace: configure failure: shell command failed (see
 log for details)
     while executing
 "$procedure $targetname"
 :info:configure Warning: the following items did not execute (for
 kdebase4-workspace): org.macports.activate org.macports.configure
 org.macports.build org.macports.destroot org.macports.install
 :notice:configure Log for kdebase4-workspace is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/main.log
 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/27902>
MacPorts <http://www.macports.org/>
Ports system for Mac OS