[MacPorts] #28208: ncview-1.93g configure error
MacPorts
noreply at macports.org
Sun Jan 30 10:16:42 PST 2011
#28208: ncview-1.93g configure error
------------------------------------+---------------------------------------
Reporter: wdcollins@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.9.2
Keywords: | Port:
------------------------------------+---------------------------------------
Install of ncview-1.93g on Mac is failing, due to failure
to find "ppm.h" file in /opt/local/include.
OS: Mac OS X 10.6.6
Developer Information:[[BR]]
Version: 3.2 (10M2423)[[BR]]
Location: /Developer[[BR]]
Applications:[[BR]]
Xcode: 3.2.5 (1760)[[BR]]
Interface Builder: 3.2.5 (823)[[BR]]
Instruments: 2.7 (3017)[[BR]]
Dashcode: 3.0.2 (333)[[BR]]
After repeated attempts, I ran the following:[[BR]]
1. sudo port -f uninstall ncview[[BR]]
2. sudo port -d clean --work --archive ncview[[BR]]
3. sudo port -d intall ncview[[BR]]
Log from the attempt to install is as follows:
{{{
version:1
:debug:main epoch: in tree: 1 installed: 1
:debug:main netcdf 4.1.1_4 exists in the ports tree
:debug:main netcdf 4.1.1_4 +dap+netcdf4 is the latest installed
:debug:main netcdf 4.1.1_4 +dap+netcdf4 is active
:debug:main Merging existing variants '+dap+netcdf4' into variants
:debug:main new fully merged portvariants: netcdf4 + dap +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/science/netcdf
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant netcdf4 provides netcdf4
:debug:main Executing variant dap provides dap
:debug:main No need to upgrade! netcdf 4.1.1_4 >= netcdf 4.1.1_4
:debug:main epoch: in tree: 0 installed: 0
:debug:main hdf5-18 1.8.5-patch1_0 exists in the ports tree
:debug:main hdf5-18 1.8.5-patch1_0 is the latest installed
:debug:main hdf5-18 1.8.5-patch1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/science/hdf5-18
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! hdf5-18 1.8.5-patch1_0 >= hdf5-18
1.8.5-patch1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0 is the latest installed
:debug:main zlib 1.2.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main szip 2.1_1 exists in the ports tree
:debug:main szip 2.1_1 is the latest installed
:debug:main szip 2.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/szip
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! szip 2.1_1 >= szip 2.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main curl 7.21.2_2 exists in the ports tree
:debug:main curl 7.21.2_2 +ssl is the latest installed
:debug:main curl 7.21.2_2 +ssl is active
:debug:main Merging existing variants '+ssl' into variants
:debug:main new fully merged portvariants: ssl +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant ssl provides ssl
:debug:main No need to upgrade! curl 7.21.2_2 >= curl 7.21.2_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libidn 1.19_0 exists in the ports tree
:debug:main libidn 1.19_0 is the latest installed
:debug:main libidn 1.19_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libidn 1.19_0 >= libidn 1.19_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0 is the latest installed
:debug:main libiconv 1.13.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 is the latest installed
:debug:main gettext 0.18.1.1_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.7_1 exists in the ports tree
:debug:main ncurses 5.7_1 is the latest installed
:debug:main ncurses 5.7_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncursesw 5.7_1 exists in the ports tree
:debug:main ncursesw 5.7_1 is the latest installed
:debug:main ncursesw 5.7_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 is the latest installed
:debug:main expat 2.0.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0c_0 exists in the ports tree
:debug:main openssl 1.0.0c_0 is the latest installed
:debug:main openssl 1.0.0c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! openssl 1.0.0c_0 >= openssl 1.0.0c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main curl-ca-bundle 7.21.2_4 exists in the ports tree
:debug:main curl-ca-bundle 7.21.2_4 is the latest installed
:debug:main curl-ca-bundle 7.21.2_4 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-
ca-bundle
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! curl-ca-bundle 7.21.2_4 >= curl-ca-bundle
7.21.2_4
:debug:main epoch: in tree: 0 installed: 0
:debug:main udunits 1.12.9_0 exists in the ports tree
:debug:main udunits 1.12.9_0 is the latest installed
:debug:main udunits 1.12.9_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/science/udunits
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! udunits 1.12.9_0 >= udunits 1.12.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main netpbm 10.47.25_1 exists in the ports tree
:debug:main netpbm 10.47.25_1 is the latest installed
:debug:main netpbm 10.47.25_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/netpbm
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! netpbm 10.47.25_1 >= netpbm 10.47.25_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8b_0 exists in the ports tree
:debug:main jpeg 8b_0 is the latest installed
:debug:main jpeg 8b_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.4_0 exists in the ports tree
:debug:main tiff 3.9.4_0 is the latest installed
:debug:main tiff 3.9.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.4.5_0 exists in the ports tree
:debug:main libpng 1.4.5_0 is the latest installed
:debug:main libpng 1.4.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libpng 1.4.5_0 >= libpng 1.4.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jasper 1.900.1_7 exists in the ports tree
:debug:main jasper 1.900.1_7 is the latest installed
:debug:main jasper 1.900.1_7 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.8_0 exists in the ports tree
:debug:main libxml2 2.7.8_0 is the latest installed
:debug:main libxml2 2.7.8_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXaw 1.0.9_0 exists in the ports tree
:debug:main xorg-libXaw 1.0.9_0 is the latest installed
:debug:main xorg-libXaw 1.0.9_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXaw
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXaw 1.0.9_0 >= xorg-libXaw 1.0.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libsm 1.2.0_0 exists in the ports tree
:debug:main xorg-libsm 1.2.0_0 is the latest installed
:debug:main xorg-libsm 1.2.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libsm
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libsm 1.2.0_0 >= xorg-libsm 1.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libice 1.0.7_0 exists in the ports tree
:debug:main xorg-libice 1.0.7_0 is the latest installed
:debug:main xorg-libice 1.0.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libice
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libice 1.0.7_0 >= xorg-libice 1.0.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.20_0 exists in the ports tree
:debug:main xorg-xproto 7.0.20_0 is the latest installed
:debug:main xorg-xproto 7.0.20_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-xproto 7.0.20_0 >= xorg-xproto
7.0.20_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXext 1.2.0_0 exists in the ports tree
:debug:main xorg-libXext 1.2.0_0 is the latest installed
:debug:main xorg-libXext 1.2.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXext 1.2.0_0 >= xorg-libXext
1.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.4.1_0 exists in the ports tree
:debug:main xorg-libX11 1.4.1_0 is the latest installed
:debug:main xorg-libX11 1.4.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libX11 1.4.1_0 >= xorg-libX11 1.4.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.1.0_0 is the latest installed
:debug:main xorg-libXdmcp 1.1.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp
1.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.6_0 exists in the ports tree
:debug:main xorg-libXau 1.0.6_0 is the latest installed
:debug:main xorg-libXau 1.0.6_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libxcb 1.7_0 exists in the ports tree
:debug:main xorg-libxcb 1.7_0 +python27 is the latest installed
:debug:main xorg-libxcb 1.7_0 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libxcb
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
:debug:main xorg-xcb-proto 1.6_0 +python27 is the latest installed
:debug:main xorg-xcb-proto 1.6_0 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xcb-proto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto
1.6_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main python27 2.7.1_1 exists in the ports tree
:debug:main python27 2.7.1_1 is the latest installed
:debug:main python27 2.7.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! python27 2.7.1_1 >= python27 2.7.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.4_0 exists in the ports tree
:debug:main sqlite3 3.7.4_0 is the latest installed
:debug:main sqlite3 3.7.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! sqlite3 3.7.4_0 >= sqlite3 3.7.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.1.002_0 exists in the ports tree
:debug:main readline 6.1.002_0 is the latest installed
:debug:main readline 6.1.002_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! readline 6.1.002_0 >= readline 6.1.002_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6 is the latest installed
:debug:main db46 4.6.21_6 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.8.3_3 exists in the ports tree
:debug:main gdbm 1.8.3_3 is the latest installed
:debug:main gdbm 1.8.3_3 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0 is the latest installed
:debug:main bzip2 1.0.6_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
:debug:main xorg-libpthread-stubs 0.3_0 is the latest installed
:debug:main xorg-libpthread-stubs 0.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libpthread-stubs
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
libpthread-stubs 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.5_0 is the latest installed
:debug:main xorg-kbproto 1.0.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
1.0.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xextproto 7.1.2_0 exists in the ports tree
:debug:main xorg-xextproto 7.1.2_0 is the latest installed
:debug:main xorg-xextproto 7.1.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-xextproto 7.1.2_0 >= xorg-xextproto
7.1.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXmu 1.1.0_0 exists in the ports tree
:debug:main xorg-libXmu 1.1.0_0 is the latest installed
:debug:main xorg-libXmu 1.1.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXmu
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXmu 1.1.0_0 >= xorg-libXmu 1.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXt 1.0.9_0 exists in the ports tree
:debug:main xorg-libXt 1.0.9_0 is the latest installed
:debug:main xorg-libXt 1.0.9_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXt
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXt 1.0.9_0 >= xorg-libXt 1.0.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xpm 3.5.9_0 exists in the ports tree
:debug:main xpm 3.5.9_0 is the latest installed
:debug:main xpm 3.5.9_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xpm 3.5.9_0 >= xpm 3.5.9_0
:msg:main ---> Computing dependencies for ncview:msg:main
:debug:main Searching for dependency: netcdf
:debug:main Found Dependency: receipt exists for netcdf
:debug:main Searching for dependency: udunits
:debug:main Found Dependency: receipt exists for udunits
:debug:main Searching for dependency: netpbm
:debug:main Found Dependency: receipt exists for netpbm
:debug:main Searching for dependency: xorg-libXaw
:debug:main Found Dependency: receipt exists for xorg-libXaw
:debug:main Searching for dependency: xorg-libXt
:debug:main Found Dependency: receipt exists for xorg-libXt
:debug:main Searching for dependency: xorg-libice
:debug:main Found Dependency: receipt exists for xorg-libice
:debug:main Executing org.macports.main (ncview)
:msg:main ---> Fetching ncview
:debug:fetch fetch phase started at Sun Jan 30 09:56:53 PST 2011
:debug:fetch Executing org.macports.fetch (ncview)
:msg:fetch ---> Verifying checksum(s) for ncview
:debug:checksum checksum phase started at Sun Jan 30 09:56:53 PST 2011
:debug:checksum Executing org.macports.checksum (ncview)
:info:checksum ---> Checksumming ncview-1.93g.tar.gz
:debug:checksum Correct (md5) checksum for ncview-1.93g.tar.gz
:debug:checksum Correct (sha1) checksum for ncview-1.93g.tar.gz
:debug:checksum Correct (rmd160) checksum for ncview-1.93g.tar.gz
:msg:checksum ---> Extracting ncview
:debug:extract extract phase started at Sun Jan 30 09:56:53 PST 2011
:debug:extract Executing org.macports.extract (ncview)
:info:extract ---> Extracting ncview-1.93g.tar.gz
:debug:extract setting option extract.args to
'/opt/local/var/macports/distfiles/ncview/ncview-1.93g.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:extract Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/work"
&& /usr/bin/gzip -dc
'/opt/local/var/macports/distfiles/ncview/ncview-1.93g.tar.gz' |
/usr/bin/gnutar --no-same-owner -xf -'
:debug:patch patch phase started at Sun Jan 30 09:56:54 PST 2011
:debug:patch Executing org.macports.patch (ncview)
:msg:patch ---> Applying patches to ncview
:info:patch ---> Applying
/opt/local/var/macports/sources/rsync.macports.org/release/ports/science/ncview/files
/patch-Makefile.in.diff
:debug:patch Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/work/ncview-1.93g"
&& /usr/bin/patch -p0'
:info:patch patching file Makefile.in
:info:patch ---> Applying
/opt/local/var/macports/sources/rsync.macports.org/release/ports/science/ncview/files
/patch-configure.diff
:debug:patch Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/work/ncview-1.93g"
&& /usr/bin/patch -p0'
:info:patch patching file configure
:msg:patch ---> Configuring ncview
:debug:patch Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Sun Jan 30 09:56:54 PST 2011
:debug:configure Executing org.macports.configure (ncview)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2
-arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch
x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
CXX='/usr/bin/g++-4.2'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/work/.CC_PRINT_OPTIONS'
F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64'
OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install
-c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64'
CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
:debug:configure Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/work/ncview-1.93g"
&& ./configure --prefix=/opt/local --with-netcdf_incdir=/opt/local/include
--with-netcdf_libdir=/opt/local/lib --with-bindir=/opt/local/bin --with-
udunits_incdir=/opt/local/include --with-udunits_libdir=/opt/local/lib
--with-ppm_incdir=/opt/local/include --with-ppm_libdir=/opt/local/lib
--x-includes=/opt/local --x-libraries=/opt/local'
:info:configure checking for gcc... /usr/bin/gcc-4.2
:info:configure checking for C compiler default output file name... a.out
:info:configure checking whether the C compiler works... yes
:info:configure checking whether we are cross compiling... no
:info:configure checking for suffix of executables...
:info:configure checking for suffix of object files... o
:info:configure checking whether we are using the GNU C compiler... yes
:info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
:info:configure checking for /usr/bin/gcc-4.2 option to accept ANSI C...
none needed
:info:configure checking for library containing strerror... none required
:info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2
-E
:info:configure checking for egrep... grep -E
:info:configure checking for ANSI C header files... yes
:info:configure checking for X... libraries /opt/local, headers /opt/local
:info:configure checking for gethostbyname... yes
:info:configure checking for connect... yes
:info:configure checking for remove... yes
:info:configure checking for shmat... yes
:info:configure checking for IceConnectionNumber in -lICE... yes
:info:configure checking for sys/types.h... yes
:info:configure checking for sys/stat.h... yes
:info:configure checking for stdlib.h... yes
:info:configure checking for string.h... yes
:info:configure checking for memory.h... yes
:info:configure checking for strings.h... yes
:info:configure checking for inttypes.h... yes
:info:configure checking for stdint.h... yes
:info:configure checking for unistd.h... yes
:info:configure checking /opt/local/include/netcdf.h usability... yes
:info:configure checking /opt/local/include/netcdf.h presence... yes
:info:configure checking for /opt/local/include/netcdf.h... yes
:info:configure Using user-specified netCDF include dir=/opt/local/include
:info:configure Found netcdf.h in: /opt/local/include
:info:configure checking for /opt/local/lib/libnetcdf.a... yes
:info:configure Using user-specified netCDF library dir=/opt/local/lib
:info:configure Found netcdf library file libnetcdf.a in directory
/opt/local/lib
:info:configure checking /opt/local/include/udunits.h usability... yes
:info:configure checking /opt/local/include/udunits.h presence... yes
:info:configure checking for /opt/local/include/udunits.h... yes
:info:configure Using user-specified udunits include
dir=/opt/local/include
:info:configure checking for /opt/local/lib/libudunits.a... yes
:info:configure Using user-specified udunits library dir=/opt/local/lib
:info:configure
****************************************************************************
:info:configure Udunits support enabled.
:info:configure
****************************************************************************
:info:configure checking /opt/local/include/ppm.h usability... no
:info:configure checking /opt/local/include/ppm.h presence... no
:info:configure checking for /opt/local/include/ppm.h... no
:info:configure Error: user specified ppm include directory does not have
ppm.h!
:info:configure shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/work/ncview-1.93g"
&& ./configure --prefix=/opt/local --with-netcdf_incdir=/opt/local/include
--with-netcdf_libdir=/opt/local/lib --with-bindir=/opt/local/bin --with-
udunits_incdir=/opt/local/include --with-udunits_libdir=/opt/local/lib
--with-ppm_incdir=/opt/local/include --with-ppm_libdir=/opt/local/lib
--x-includes=/opt/local --x-libraries=/opt/local " returned error 255
:error:configure Target org.macports.configure returned: configure
failure: shell command failed (see log for details)
:debug:configure Backtrace: configure failure: shell command failed (see
log for details)
while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for ncview):
org.macports.activate org.macports.configure org.macports.build
org.macports.destroot org.macports.install
:notice:configure Log for ncview is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_ncview/main.log
}}}
--
Ticket URL: <https://trac.macports.org/ticket/28208>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list