[MacPorts] #30056: cunit checksum mismatch

[MacPorts]

#30056: cunit checksum mismatch
----------------------------------+-----------------------------------------
 Reporter:  wingamajig@…          |       Owner:  macports-tickets@…                   
     Type:  defect                |      Status:  new                                  
 Priority:  Normal                |   Milestone:                                       
Component:  ports                 |     Version:  1.9.2                                
 Keywords:                        |        Port:  cunit                                
----------------------------------+-----------------------------------------
 pwingpc:mhs pwing$ sudo port -d install cunit
 Password:
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cunit
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cunit
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.8.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port cunit.
 DEBUG: Requested variant i386 is not provided by port cunit.
 DEBUG: Requested variant macosx is not provided by port cunit.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.8.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.8.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 --->  Computing dependencies for cunit
 DEBUG: Searching for dependency: ncurses
 DEBUG: Found Dependency: receipt exists for ncurses
 DEBUG: Executing org.macports.main (cunit)
 DEBUG: Skipping completed org.macports.fetch (cunit)
 --->  Verifying checksum(s) for cunit
 DEBUG: Executing org.macports.checksum (cunit)
 --->  Checksumming CUnit-2.1-0-src.tar.gz
 Error: Checksum (md5) mismatch for CUnit-2.1-0-src.tar.gz
 Portfile checksum: CUnit-2.1-0-src.tar.gz md5
 f4f53d2c41e9315a91b4f14a1706fe4f
 Distfile checksum: CUnit-2.1-0-src.tar.gz md5
 4133fbad57c15caf3b18b9b65edcee76
 Error: Checksum (sha1) mismatch for CUnit-2.1-0-src.tar.gz
 Portfile checksum: CUnit-2.1-0-src.tar.gz sha1
 05920c1defda3527cee3bc82fb9eadf45c5ea7a1
 Distfile checksum: CUnit-2.1-0-src.tar.gz sha1
 50c069120ba9a34022bc53bce3e3ca8266281909
 Error: Checksum (rmd160) mismatch for CUnit-2.1-0-src.tar.gz
 Portfile checksum: CUnit-2.1-0-src.tar.gz rmd160
 db3e8ea2294faae8301b597164f07fe482e877b5
 Distfile checksum: CUnit-2.1-0-src.tar.gz rmd160
 4da1649db7537a6caf8a23ee3db45975cbce97a9
 The correct checksum line may be:
 checksums           md5     4133fbad57c15caf3b18b9b65edcee76 \
                     sha1    50c069120ba9a34022bc53bce3e3ca8266281909 \
                     rmd160  4da1649db7537a6caf8a23ee3db45975cbce97a9
 Error: Target org.macports.checksum returned: Unable to verify file
 checksums
 DEBUG: Backtrace: Unable to verify file checksums
     while executing
 "$procedure $targetname"
 Warning: the following items did not execute (for cunit):
 org.macports.activate org.macports.extract org.macports.checksum
 org.macports.patch org.macports.configure org.macports.build
 org.macports.destroot org.macports.install
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>

-- 
Ticket URL: <https://trac.macports.org/ticket/30056>
MacPorts <http://www.macports.org/>
Ports system for Mac OS