[MacPorts] #29744: libgnome: in /opt/local/lib/libesd.dylib, file was built for unsupported file format which is not the architecture being linked

[MacPorts]

#29744: libgnome: in /opt/local/lib/libesd.dylib, file was built for unsupported
file format which is not the architecture being linked
-----------------------------+----------------------------------------------
 Reporter:  eisen_jr@…       |       Owner:  macports-tickets@…                   
     Type:  defect           |      Status:  new                                  
 Priority:  Normal           |   Milestone:                                       
Component:  ports            |     Version:  1.9.2                                
 Keywords:                   |        Port:  libgnome                             
-----------------------------+----------------------------------------------

Comment(by eisen_jr@…):

 Dear Joshua and Ryan.

 Thanks for the help and comments

 To make it short the upgrade of esound was the solution I was seeking for.
 After upgrading esound the libesd.dylib was also installed for both
 architectures. That helped also to build libgnome.
 problem solved.
 My problem was in fact, that I did not know where the libesd library comes
 from.

 For the future: Is there a decent way to find the package a library was
 delivered with.
 That would make live much easier for me.


 Attached is the requested log file, if this is still of interest.

 Thanks for all

 Thomas

 {{{
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libbonobo 2.24.3_0 exists in the ports tree
 :debug:main libbonobo 2.24.3_0 +universal is the latest installed
 :debug:main libbonobo 2.24.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libbonobo
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libbonobo 2.24.3_0 >= libbonobo 2.24.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main glib2 2.28.7_0 exists in the ports tree
 :debug:main glib2 2.28.7_0 +universal is the latest installed
 :debug:main glib2 2.28.7_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! glib2 2.28.7_0 >= glib2 2.28.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2 +universal is the latest installed
 :debug:main gettext 0.18.1.1_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.13.1_0 exists in the ports tree
 :debug:main libiconv 1.13.1_0 +universal is the latest installed
 :debug:main libiconv 1.13.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.9_0 exists in the ports tree
 :debug:main ncurses 5.9_0 +universal is the latest installed
 :debug:main ncurses 5.9_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_1 exists in the ports tree
 :debug:main expat 2.0.1_1 +universal is the latest installed
 :debug:main expat 2.0.1_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.5_0 exists in the ports tree
 :debug:main zlib 1.2.5_0 +universal is the latest installed
 :debug:main zlib 1.2.5_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5 5.12.3_1 exists in the ports tree
 :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
 :debug:main perl5 5.12.3_1 +perl5_12 is active
 :debug:main Merging existing variants '+perl5_12' into variants
 :debug:main new fully merged portvariants: universal + perl5_12 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Requested variant universal is not provided by port perl5.
 :debug:main Executing variant perl5_12 provides perl5_12
 :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5.12 5.12.3_1 exists in the ports tree
 :debug:main perl5.12 5.12.3_1 +universal is the latest installed
 :debug:main perl5.12 5.12.3_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus-glib 0.94_0 exists in the ports tree
 :debug:main dbus-glib 0.94_0 +universal is the latest installed
 :debug:main dbus-glib 0.94_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /dbus-glib
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! dbus-glib 0.94_0 >= dbus-glib 0.94_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus 1.4.10_1 exists in the ports tree
 :debug:main dbus 1.4.10_1 +universal is the latest installed
 :debug:main dbus 1.4.10_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! dbus 1.4.10_1 >= dbus 1.4.10_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main orbit2 2.14.19_0 exists in the ports tree
 :debug:main orbit2 2.14.19_0 +universal is the latest installed
 :debug:main orbit2 2.14.19_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orbit2
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! orbit2 2.14.19_0 >= orbit2 2.14.19_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libidl 0.8.14_0 exists in the ports tree
 :debug:main libidl 0.8.14_0 +universal is the latest installed
 :debug:main libidl 0.8.14_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libidl
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libidl 0.8.14_0 >= libidl 0.8.14_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxml2 2.7.8_0 exists in the ports tree
 :debug:main libxml2 2.7.8_0 +universal is the latest installed
 :debug:main libxml2 2.7.8_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main popt 1.16_0 exists in the ports tree
 :debug:main popt 1.16_0 +universal is the latest installed
 :debug:main popt 1.16_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! popt 1.16_0 >= popt 1.16_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main esound 0.2.41_1 exists in the ports tree
 :debug:main esound 0.2.41_1  is the latest installed
 :debug:main esound 0.2.41_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/esound
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main Skipping upgrade since esound 0.2.41_1 >= esound 0.2.41_1,
 even though installed variants "" do not match "+universal".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main audiofile 0.2.7_0 exists in the ports tree
 :debug:main audiofile 0.2.7_0 +universal is the latest installed
 :debug:main audiofile 0.2.7_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/audiofile
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! audiofile 0.2.7_0 >= audiofile 0.2.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gnome-vfs 2.24.4_0 exists in the ports tree
 :debug:main gnome-vfs 2.24.4_0 +universal is the latest installed
 :debug:main gnome-vfs 2.24.4_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-vfs
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gnome-vfs 2.24.4_0 >= gnome-vfs 2.24.4_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main gconf 2.28.1_2 exists in the ports tree
 :debug:main gconf 2.28.1_2 +universal is the latest installed
 :debug:main gconf 2.28.1_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gconf
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gconf 2.28.1_2 >= gconf 2.28.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gtk2 2.24.4_0 exists in the ports tree
 :debug:main gtk2 2.24.4_0 +universal+x11 is the latest installed
 :debug:main gtk2 2.24.4_0 +universal+x11 is active
 :debug:main Merging existing variants '+universal+x11' into variants
 :debug:main new fully merged portvariants: universal + x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk2
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! gtk2 2.24.4_0 >= gtk2 2.24.4_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main atk 1.32.0_0 exists in the ports tree
 :debug:main atk 1.32.0_0 +universal is the latest installed
 :debug:main atk 1.32.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! atk 1.32.0_0 >= atk 1.32.0_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main pango 1.28.4_0 exists in the ports tree
 :debug:main pango 1.28.4_0 +universal+x11 is the latest installed
 :debug:main pango 1.28.4_0 +universal+x11 is active
 :debug:main Merging existing variants '+universal+x11' into variants
 :debug:main new fully merged portvariants: universal + x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main Executing variant x11 provides x11
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! pango 1.28.4_0 >= pango 1.28.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cairo 1.10.2_3 exists in the ports tree
 :debug:main cairo 1.10.2_3 +universal+x11 is the latest installed
 :debug:main cairo 1.10.2_3 +universal+x11 is active
 :debug:main Merging existing variants '+universal+x11' into variants
 :debug:main new fully merged portvariants: universal + x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! cairo 1.10.2_3 >= cairo 1.10.2_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpixman 0.22.0_0 exists in the ports tree
 :debug:main libpixman 0.22.0_0 +universal is the latest installed
 :debug:main libpixman 0.22.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libpixman 0.22.0_0 >= libpixman 0.22.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main fontconfig 2.8.0_0 exists in the ports tree
 :debug:main fontconfig 2.8.0_0 +universal is the latest installed
 :debug:main fontconfig 2.8.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main freetype 2.4.4_0 exists in the ports tree
 :debug:main freetype 2.4.4_0 +universal is the latest installed
 :debug:main freetype 2.4.4_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! freetype 2.4.4_0 >= freetype 2.4.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpng 1.4.7_0 exists in the ports tree
 :debug:main libpng 1.4.7_0 +universal is the latest installed
 :debug:main libpng 1.4.7_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libpng 1.4.7_0 >= libpng 1.4.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xrender 0.9.6_0 exists in the ports tree
 :debug:main xrender 0.9.6_0 +universal is the latest installed
 :debug:main xrender 0.9.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libX11 1.4.3_0 exists in the ports tree
 :debug:main xorg-libX11 1.4.3_0 +universal is the latest installed
 :debug:main xorg-libX11 1.4.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libX11 1.4.3_0 >= xorg-libX11 1.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
 :debug:main xorg-libXdmcp 1.1.0_0 +universal is the latest installed
 :debug:main xorg-libXdmcp 1.1.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp
 1.1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXau 1.0.6_0 exists in the ports tree
 :debug:main xorg-libXau 1.0.6_0 +universal is the latest installed
 :debug:main xorg-libXau 1.0.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xproto 7.0.21_0 exists in the ports tree
 :debug:main xorg-xproto 7.0.21_0  is the latest installed
 :debug:main xorg-xproto 7.0.21_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 xproto.
 :debug:main No need to upgrade! xorg-xproto 7.0.21_0 >= xorg-xproto
 7.0.21_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libxcb 1.7_0 exists in the ports tree
 :debug:main xorg-libxcb 1.7_0 +python26+universal is the latest installed
 :debug:main xorg-libxcb 1.7_0 +python26+universal is active
 :debug:main Merging existing variants '+python26+universal' into variants
 :debug:main new fully merged portvariants: universal + python26 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libxcb
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant python26 provides python26
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
 :debug:main xorg-xcb-proto 1.6_0 +python26 is the latest installed
 :debug:main xorg-xcb-proto 1.6_0 +python26 is active
 :debug:main Merging existing variants '+python26' into variants
 :debug:main new fully merged portvariants: universal + python26 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-proto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-xcb-
 proto.
 :debug:main Executing variant python26 provides python26
 :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto
 1.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python26 2.6.6_3 exists in the ports tree
 :debug:main python26 2.6.6_3 +universal is the latest installed
 :debug:main python26 2.6.6_3 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! python26 2.6.6_3 >= python26 2.6.6_3
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.0d_0 exists in the ports tree
 :debug:main openssl 1.0.0d_0 +universal is the latest installed
 :debug:main openssl 1.0.0d_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main sqlite3 3.7.6_0 exists in the ports tree
 :debug:main sqlite3 3.7.6_0 +universal is the latest installed
 :debug:main sqlite3 3.7.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main readline 6.2.000_0 exists in the ports tree
 :debug:main readline 6.2.000_0 +universal is the latest installed
 :debug:main readline 6.2.000_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main db46 4.6.21_6 exists in the ports tree
 :debug:main db46 4.6.21_6 +universal is the latest installed
 :debug:main db46 4.6.21_6 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdbm 1.8.3_3 exists in the ports tree
 :debug:main gdbm 1.8.3_3 +universal is the latest installed
 :debug:main gdbm 1.8.3_3 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0 +universal is the latest installed
 :debug:main bzip2 1.0.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python_select 0.3_1 exists in the ports tree
 :debug:main python_select 0.3_1  is the latest installed
 :debug:main python_select 0.3_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Requested variant universal is not provided by port
 python_select.
 :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
 :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
 :debug:main xorg-libpthread-stubs 0.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libpthread-stubs
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 libpthread-stubs.
 :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
 libpthread-stubs 0.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
 :debug:main xorg-kbproto 1.0.5_0  is the latest installed
 :debug:main xorg-kbproto 1.0.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 kbproto.
 :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
 1.0.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
 :debug:main xorg-renderproto 0.11.1_0  is the latest installed
 :debug:main xorg-renderproto 0.11.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 renderproto.
 :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
 renderproto 0.11.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-util 0.3.8_0 exists in the ports tree
 :debug:main xorg-xcb-util 0.3.8_0 +universal is the latest installed
 :debug:main xorg-xcb-util 0.3.8_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-util
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-xcb-util 0.3.8_0 >= xorg-xcb-util
 0.3.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main Xft2 2.2.0_0 exists in the ports tree
 :debug:main Xft2 2.2.0_0 +universal is the latest installed
 :debug:main Xft2 2.2.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main gdk-pixbuf2 2.22.1_1 exists in the ports tree
 :debug:main gdk-pixbuf2 2.22.1_1 +universal is the latest installed
 :debug:main gdk-pixbuf2 2.22.1_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics
 /gdk-pixbuf2
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gdk-pixbuf2 2.22.1_1 >= gdk-pixbuf2
 2.22.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jasper 1.900.1_7 exists in the ports tree
 :debug:main jasper 1.900.1_7 +universal is the latest installed
 :debug:main jasper 1.900.1_7 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jpeg 8c_0 exists in the ports tree
 :debug:main jpeg 8c_0 +universal is the latest installed
 :debug:main jpeg 8c_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main tiff 3.9.5_0 exists in the ports tree
 :debug:main tiff 3.9.5_0 +universal is the latest installed
 :debug:main tiff 3.9.5_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXi 1.4.1_0 exists in the ports tree
 :debug:main xorg-libXi 1.4.1_0 +universal is the latest installed
 :debug:main xorg-libXi 1.4.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXi
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXi 1.4.1_0 >= xorg-libXi 1.4.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXext 1.3.0_0 exists in the ports tree
 :debug:main xorg-libXext 1.3.0_0 +universal is the latest installed
 :debug:main xorg-libXext 1.3.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext
 1.3.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xextproto 7.2.0_0 exists in the ports tree
 :debug:main xorg-xextproto 7.2.0_0  is the latest installed
 :debug:main xorg-xextproto 7.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 xextproto.
 :debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto
 7.2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-inputproto 2.0.1_0 exists in the ports tree
 :debug:main xorg-inputproto 2.0.1_0  is the latest installed
 :debug:main xorg-inputproto 2.0.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 inputproto.
 :debug:main No need to upgrade! xorg-inputproto 2.0.1_0 >= xorg-inputproto
 2.0.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXrandr 1.3.1_0 exists in the ports tree
 :debug:main xorg-libXrandr 1.3.1_0 +universal is the latest installed
 :debug:main xorg-libXrandr 1.3.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXrandr 1.3.1_0 >= xorg-libXrandr
 1.3.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-randrproto 1.3.2_0 exists in the ports tree
 :debug:main xorg-randrproto 1.3.2_0  is the latest installed
 :debug:main xorg-randrproto 1.3.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 randrproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 randrproto.
 :debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto
 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcursor 1.1.11_0 exists in the ports tree
 :debug:main xorg-libXcursor 1.1.11_0 +universal is the latest installed
 :debug:main xorg-libXcursor 1.1.11_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcursor
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXcursor 1.1.11_0 >= xorg-
 libXcursor 1.1.11_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXfixes 5.0_0 exists in the ports tree
 :debug:main xorg-libXfixes 5.0_0 +universal is the latest installed
 :debug:main xorg-libXfixes 5.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXfixes
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes
 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-fixesproto 5.0_0 exists in the ports tree
 :debug:main xorg-fixesproto 5.0_0  is the latest installed
 :debug:main xorg-fixesproto 5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 fixesproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 fixesproto.
 :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto
 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree
 :debug:main xorg-libXinerama 1.1.1_0 +universal is the latest installed
 :debug:main xorg-libXinerama 1.1.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXinerama
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-
 libXinerama 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-xineramaproto 1.2.1_0  is the latest installed
 :debug:main xorg-xineramaproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xineramaproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 xineramaproto.
 :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-
 xineramaproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
 :debug:main xorg-libXdamage 1.1.3_0 +universal is the latest installed
 :debug:main xorg-libXdamage 1.1.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdamage
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage
 1.1.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-damageproto 1.2.1_0  is the latest installed
 :debug:main xorg-damageproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 damageproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 damageproto.
 :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-
 damageproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
 :debug:main xorg-libXcomposite 0.4.3_0 +universal is the latest installed
 :debug:main xorg-libXcomposite 0.4.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcomposite
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
 libXcomposite 0.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
 :debug:main xorg-compositeproto 0.4.2_0  is the latest installed
 :debug:main xorg-compositeproto 0.4.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 compositeproto
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 compositeproto.
 :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
 compositeproto 0.4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main shared-mime-info 0.90_0 exists in the ports tree
 :debug:main shared-mime-info 0.90_0 +universal is the latest installed
 :debug:main shared-mime-info 0.90_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /shared-mime-info
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! shared-mime-info 0.90_0 >= shared-mime-
 info 0.90_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main policykit 0.101_0 exists in the ports tree
 :debug:main policykit 0.101_0 +universal is the latest installed
 :debug:main policykit 0.101_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/security/policykit
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! policykit 0.101_0 >= policykit 0.101_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main eggdbus 0.6_0 exists in the ports tree
 :debug:main eggdbus 0.6_0 +universal is the latest installed
 :debug:main eggdbus 0.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/eggdbus
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! eggdbus 0.6_0 >= eggdbus 0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main desktop-file-utils 0.15_1 exists in the ports tree
 :debug:main desktop-file-utils 0.15_1  is the latest installed
 :debug:main desktop-file-utils 0.15_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /desktop-file-utils
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main Skipping upgrade since desktop-file-utils 0.15_1 >= desktop-
 file-utils 0.15_1, even though installed variants "" do not match
 "+universal".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gnome-mime-data 2.18.0_3 exists in the ports tree
 :debug:main gnome-mime-data 2.18.0_3  is the latest installed
 :debug:main gnome-mime-data 2.18.0_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-mime-data
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port gnome-
 mime-data.
 :debug:main No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-
 data 2.18.0_3
 :msg:main --->  Computing dependencies for libgnome:info:main .:debug:main
 Searching for dependency: libbonobo
 :debug:main Found Dependency: receipt exists for libbonobo
 :debug:main Searching for dependency: esound
 :debug:main Found Dependency: receipt exists for esound
 :debug:main Searching for dependency: gnome-vfs
 :debug:main Found Dependency: receipt exists for gnome-vfs
 :debug:main Searching for dependency: libiconv
 :debug:main Found Dependency: receipt exists for libiconv
 :debug:main Searching for dependency: gettext
 :debug:main Found Dependency: receipt exists for gettext
 :msg:main
 :debug:main Executing org.macports.main (libgnome)
 :msg:main --->  Fetching libgnome
 :debug:fetch fetch phase started at Thu Jun  9 13:46:04 CEST 2011
 :debug:fetch Executing org.macports.fetch (libgnome)
 :msg:fetch --->  Verifying checksum(s) for libgnome
 :debug:checksum checksum phase started at Thu Jun  9 13:46:04 CEST 2011
 :debug:checksum Executing org.macports.checksum (libgnome)
 :info:checksum --->  Checksumming libgnome-2.30.0.tar.bz2
 :debug:checksum Correct (md5) checksum for libgnome-2.30.0.tar.bz2
 :debug:checksum Correct (sha1) checksum for libgnome-2.30.0.tar.bz2
 :debug:checksum Correct (rmd160) checksum for libgnome-2.30.0.tar.bz2
 :debug:checksum setting option extract.cmd to /usr/bin/bzip2
 :msg:checksum --->  Extracting libgnome
 :debug:extract extract phase started at Thu Jun  9 13:46:04 CEST 2011
 :debug:extract Executing org.macports.extract (libgnome)
 :info:extract --->  Extracting libgnome-2.30.0.tar.bz2
 :debug:extract setting option extract.args to
 '/opt/local/var/macports/distfiles/libgnome/libgnome-2.30.0.tar.bz2'
 :debug:extract Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnome/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:extract Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnome/work"
 && /usr/bin/bzip2 -dc
 '/opt/local/var/macports/distfiles/libgnome/libgnome-2.30.0.tar.bz2' |
 /usr/bin/gnutar --no-same-owner -xf -'
 :debug:patch patch phase started at Thu Jun  9 13:46:05 CEST 2011
 :debug:patch Executing org.macports.patch (libgnome)
 :msg:patch --->  Configuring libgnome
 :debug:patch Using compiler 'Mac OS X gcc 4.2'
 :debug:configure configure phase started at Thu Jun  9 13:46:05 CEST 2011
 :debug:configure Executing org.macports.configure (libgnome)
 :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch
 x86_64 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch
 x86_64 -arch i386' LIBRARY_PATH='/opt/local/lib'
 MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnome/work/.CC_PRINT_OPTIONS'
 F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib -arch x86_64 -arch i386'
 OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2' INSTALL='/usr/bin/install -c'
 OBJCFLAGS='-O2 -arch x86_64 -arch i386' FFLAGS='-O2'
 CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
 :debug:configure Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnome/work/libgnome-2.30.0"
 && ./configure --prefix=/opt/local --disable-dependency-tracking'
 :info:configure checking for a BSD-compatible install... /usr/bin/install
 -c
 :info:configure checking whether build environment is sane... yes
 :info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d
 :info:configure checking for gawk... no
 :info:configure checking for mawk... no
 :info:configure checking for nawk... no
 :info:configure checking for awk... awk
 :info:configure checking whether make sets $(MAKE)... yes
 :info:configure checking whether to enable maintainer-specific portions of
 Makefiles... no
 :info:configure checking whether NLS is requested... yes
 :info:configure checking for style of include used by make... GNU
 :info:configure checking for gcc... /usr/bin/gcc-4.2
 :info:configure checking for C compiler default output file name... a.out
 :info:configure checking whether the C compiler works... yes
 :info:configure checking whether we are cross compiling... no
 :info:configure checking for suffix of executables...
 :info:configure checking for suffix of object files... o
 :info:configure checking whether we are using the GNU C compiler... yes
 :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
 :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89...
 none needed
 :info:configure checking dependency style of /usr/bin/gcc-4.2... none
 :info:configure checking for intltool >= 0.40.0... 0.40.6 found
 :info:configure checking for intltool-update... /opt/local/bin/intltool-
 update
 :info:configure checking for intltool-merge... /opt/local/bin/intltool-
 merge
 :info:configure checking for intltool-extract... /opt/local/bin/intltool-
 extract
 :info:configure checking for xgettext... /opt/local/bin/xgettext
 :info:configure checking for msgmerge... /opt/local/bin/msgmerge
 :info:configure checking for msgfmt... /opt/local/bin/msgfmt
 :info:configure checking for gmsgfmt... /opt/local/bin/msgfmt
 :info:configure checking for perl... /opt/local/bin/perl
 :info:configure checking for perl >= 5.8.1... 5.12.3
 :info:configure checking for XML::Parser... ok
 :info:configure checking for a sed that does not truncate output...
 /opt/local/bin/gsed
 :info:configure checking for library containing strerror... none required
 :info:configure checking for gcc... (cached) /usr/bin/gcc-4.2
 :info:configure checking whether we are using the GNU C compiler...
 (cached) yes
 :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... (cached)
 yes
 :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89...
 (cached) none needed
 :info:configure checking dependency style of /usr/bin/gcc-4.2... (cached)
 none
 :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2
 -E
 :info:configure checking for grep that handles long lines and -e...
 /usr/bin/grep
 :info:configure checking for egrep... /usr/bin/grep -E
 :info:configure checking for ANSI C header files... yes
 :info:configure checking build system type... i386-apple-darwin10.7.0
 :info:configure checking host system type... i386-apple-darwin10.7.0
 :info:configure checking for a sed that does not truncate output...
 (cached) /opt/local/bin/gsed
 :info:configure checking for fgrep... /usr/bin/grep -F
 :info:configure checking for ld used by /usr/bin/gcc-4.2...
 /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
 :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-
 darwin10/4.2.1/ld) is GNU ld... no
 :info:configure checking for BSD- or MS-compatible name lister (nm)...
 /usr/bin/nm
 :info:configure checking the name lister (/usr/bin/nm) interface... BSD nm
 :info:configure checking whether ln -s works... yes
 :info:configure checking the maximum length of command line arguments...
 196608
 :info:configure checking whether the shell understands some XSI
 constructs... yes
 :info:configure checking whether the shell understands "+="... yes
 :info:configure checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
 option to reload object files... -r
 :info:configure checking for objdump... objdump
 :info:configure checking how to recognize dependent libraries... pass_all
 :info:configure checking for ar... ar
 :info:configure checking for strip... strip
 :info:configure checking for ranlib... ranlib
 :info:configure checking command to parse /usr/bin/nm output from
 /usr/bin/gcc-4.2 object... ok
 :info:configure checking for dsymutil... dsymutil
 :info:configure checking for nmedit... nmedit
 :info:configure checking for lipo... lipo
 :info:configure checking for otool... otool
 :info:configure checking for otool64... no
 :info:configure checking for -single_module linker flag... yes
 :info:configure checking for -exported_symbols_list linker flag... yes
 :info:configure checking for sys/types.h... yes
 :info:configure checking for sys/stat.h... yes
 :info:configure checking for stdlib.h... yes
 :info:configure checking for string.h... yes
 :info:configure checking for memory.h... yes
 :info:configure checking for strings.h... yes
 :info:configure checking for inttypes.h... yes
 :info:configure checking for stdint.h... yes
 :info:configure checking for unistd.h... yes
 :info:configure checking for dlfcn.h... yes
 :info:configure checking for objdir... .libs
 :info:configure checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-
 exceptions... no
 :info:configure checking for /usr/bin/gcc-4.2 option to produce PIC...
 -fno-common -DPIC
 :info:configure checking if /usr/bin/gcc-4.2 PIC flag -fno-common -DPIC
 works... yes
 :info:configure checking if /usr/bin/gcc-4.2 static flag -static works...
 no
 :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes
 :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o...
 (cached) yes
 :info:configure checking whether the /usr/bin/gcc-4.2 linker
 (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
 libraries... yes
 :info:configure checking dynamic linker characteristics... darwin10.7.0
 dyld
 :info:configure checking how to hardcode library paths into programs...
 immediate
 :info:configure checking whether stripping libraries is possible... yes
 :info:configure checking if libtool supports shared libraries... yes
 :info:configure checking whether to build shared libraries... yes
 :info:configure checking whether to build static libraries... yes
 :info:configure checking for Win32... no
 :info:configure checking for setenv... yes
 :info:configure checking for unsetenv... yes
 :info:configure checking for clearenv... no
 :info:configure checking for setfsgid... no
 :info:configure checking sys/fsuid.h usability... no
 :info:configure checking sys/fsuid.h presence... no
 :info:configure checking for sys/fsuid.h... no
 :info:configure checking for bind_textdomain_codeset... no
 :info:configure checking for _NSGetEnviron... yes
 :info:configure checking crt_externs.h usability... yes
 :info:configure checking crt_externs.h presence... yes
 :info:configure checking for crt_externs.h... yes
 :info:configure checking locale.h usability... yes
 :info:configure checking locale.h presence... yes
 :info:configure checking for locale.h... yes
 :info:configure checking for LC_MESSAGES... yes
 :info:configure checking libintl.h usability... yes
 :info:configure checking libintl.h presence... yes
 :info:configure checking for libintl.h... yes
 :info:configure checking for ngettext in libc... no
 :info:configure checking for bindtextdomain in -lintl... yes
 :info:configure checking for ngettext in -lintl... yes
 :info:configure checking for dgettext in -lintl... yes
 :info:configure checking for bind_textdomain_codeset... yes
 :info:configure checking for msgfmt... (cached) /opt/local/bin/msgfmt
 :info:configure checking for dcgettext... yes
 :info:configure checking if msgfmt accepts -c... yes
 :info:configure checking for gmsgfmt... (cached) /opt/local/bin/msgfmt
 :info:configure checking for xgettext... (cached) /opt/local/bin/xgettext
 :info:configure checking what warning flags to pass to the C compiler...
 -Wall -Wmissing-prototypes
 :info:configure checking what language compliance flags to pass to the C
 compiler...
 :info:configure checking for mawk... no
 :info:configure checking for gawk... no
 :info:configure checking for nawk... no
 :info:configure checking for awk... /usr/bin/awk
 :info:configure checking for perl5... /opt/local/bin/perl5
 :info:configure checking for pkg-config... /opt/local/bin/pkg-config
 :info:configure checking pkg-config is at least version 0.9.0... yes
 :info:configure checking whether ESounD support is requested... yes
 :info:configure checking for SOUND_TEST... yes
 :info:configure checking for LIBGNOME... yes
 :info:configure checking for GIO... yes
 :info:configure checking for gtkdoc-check... /opt/local/bin/gtkdoc-check
 :info:configure checking for gtkdoc-rebase... /opt/local/bin/gtkdoc-rebase
 :info:configure checking for gtkdoc-mkpdf... /opt/local/bin/gtkdoc-mkpdf
 :info:configure checking whether to build gtk-doc documentation... no
 :info:configure checking for gconftool-2... /opt/local/bin/gconftool-2
 :info:configure Using config source
 xml:merged:/opt/local/etc/gconf/gconf.xml.defaults for schema installation
 :info:configure Using $(sysconfdir)/gconf/schemas as install directory for
 schema files
 :info:configure checking for poptStrippedArgv in -lpopt... yes
 :info:configure configure: creating ./config.status
 :info:configure config.status: creating Makefile
 :info:configure config.status: creating libgnome-zip
 :info:configure config.status: creating po/Makefile.in
 :info:configure config.status: creating libgnome/Makefile
 :info:configure config.status: creating monikers/Makefile
 :info:configure config.status: creating schemas/Makefile
 :info:configure config.status: creating
 schemas/desktop_gnome_interface.schemas.in
 :info:configure config.status: creating gnome-data/Makefile
 :info:configure config.status: creating libgnome/libgnome-2.0.pc
 :info:configure config.status: creating
 libgnome/libgnome-2.0-uninstalled.pc
 :info:configure config.status: creating doc/Makefile
 :info:configure config.status: creating doc/reference/Makefile
 :info:configure config.status: creating doc/reference/version.xml
 :info:configure config.status: creating config.h
 :info:configure config.status: executing depfiles commands
 :info:configure config.status: executing libtool commands
 :info:configure config.status: executing default-1 commands
 :info:configure config.status: executing po/stamp-it commands
 :msg:configure --->  Building libgnome
 :debug:build build phase started at Thu Jun  9 13:46:27 CEST 2011
 :debug:build Executing org.macports.build (libgnome)
 :debug:build Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnome/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:build Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnome/work/libgnome-2.30.0"
 && /usr/bin/make -j2 all'
 :info:build /usr/bin/make  all-recursive
 :info:build Making all in libgnome
 :info:build   GEN    libgnometypebuiltins.c
 :info:build   GEN    stamp-libgnometypebuiltins.h
 :info:build   GEN    libgnometypebuiltins.h
 :info:build /usr/bin/make  all-am
 :info:build   CC     gnome-config.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-config.lo gnome-config.c
 :info:build   CC     libgnometypebuiltins.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o libgnometypebuiltins.lo libgnometypebuiltins.c
 :info:build   CC     gnome-sound.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-sound.lo gnome-sound.c
 :info:build   CC     gnome-triggers.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-triggers.lo gnome-triggers.c
 :info:build   CC     gnome-program.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-program.lo gnome-program.c
 :info:build   CC     gnome-help.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-help.lo gnome-help.c
 :info:build gnome-program.c: In function 'gnome_program_init_paramv':
 :info:build gnome-program.c:2142: warning: 'args' is used uninitialized in
 this function
 :info:build   CC     gnome-exec.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-exec.lo gnome-exec.c
 :info:build   CC     gnome-gconf.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-gconf.lo gnome-gconf.c
 :info:build   CC     gnome-i18n.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-i18n.lo gnome-i18n.c
 :info:build   CC     gnome-url.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-url.lo gnome-url.c
 :info:build   CC     gnome-util.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-util.lo gnome-util.c
 :info:build   CC     gnome-score.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-score.lo gnome-score.c
 :info:build   CC     gnome-init.lo
 :info:build /bin/sh ../libtool --silent --tag=CC   --mode=compile
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall -Wmissing-
 prototypes  -D_REENTRANT -DORBIT2=1 -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib/gnome-vfs-2.0/include
 -I/opt/local/include/gconf/2 -I/opt/local/include/orbit-2.0
 -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include
 -I/opt/local/include/libbonobo-2.0 -I/opt/local/include/bonobo-
 activation-2.0   -DG_DISABLE_DEPRECATED -DLIBGNOME_PREFIX=\""/opt/local"\"
 -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c -o gnome-init.lo gnome-init.c
 :info:build   CC     gnome-open.o
 :info:build /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -I./.. -Wall
 -Wmissing-prototypes  -D_REENTRANT -DORBIT2=1
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include -I/opt/local/include/gnome-vfs-2.0 -I/opt/local/lib
 /gnome-vfs-2.0/include -I/opt/local/include/gconf/2
 -I/opt/local/include/orbit-2.0 -I/opt/local/include/dbus-1.0
 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/libbonobo-2.0
 -I/opt/local/include/bonobo-activation-2.0   -DG_DISABLE_DEPRECATED
 -DLIBGNOME_PREFIX=\""/opt/local"\" -DLIBGNOME_LIBDIR=\""/opt/local/lib"\"
 -DLIBGNOME_DATADIR=\""/opt/local/share"\"
 -DLIBGNOME_LOCALSTATEDIR=\""/opt/local/var"\"
 -DLIBGNOME_SYSCONFDIR=\""/opt/local/etc"\"
 -DLIBGNOME_LOCALEDIR="\"/opt/local/share/locale\""
 -DGNOMEVFSVERSION=\"2.24.4\"
 -DGNOME_EXPLICIT_TRANSLATION_DOMAIN="GETTEXT_PACKAGE"
 -DG_LOG_DOMAIN=\"Gnome\"  -I/opt/local/include  -O2 -arch x86_64 -arch
 i386 -c gnome-open.c
 :info:build gnome-init.c: In function 'libgnome_module_info_get':
 :info:build gnome-init.c:538: warning: initialization discards qualifiers
 from pointer target type
 :info:build gnome-init.c: In function 'libgnome_module_info_get':
 :info:build gnome-init.c:538: warning: initialization discards qualifiers
 from pointer target type
 :info:build   CCLD   libgnome-2.la
 :info:build ld: warning: in /opt/local/lib/libesd.dylib, file was built
 for unsupported file format which is not the architecture being linked
 (i386)
 :info:build Undefined symbols:
 :info:build   "_esd_sample_getid", referenced from:
 :info:build       _gnome_triggers_play_sound in gnome-triggers.o
 :info:build   "_esd_sample_play", referenced from:
 :info:build       _gnome_sound_play in gnome-sound.o
 :info:build       _gnome_triggers_play_sound in gnome-triggers.o
 :info:build       _gnome_trigger_do_mediaplay in gnome-triggers.o
 :info:build   "_esd_close", referenced from:
 :info:build       _close_sound_connection in gnome-sound.o
 :info:build       _gnome_sound_sample_load in gnome-sound.o
 :info:build       _gnome_sound_sample_load in gnome-sound.o
 :info:build   "_esd_sample_cache", referenced from:
 :info:build       _gnome_sound_sample_load in gnome-sound.o
 :info:build   "_esd_confirm_sample_cache", referenced from:
 :info:build       _gnome_sound_sample_load in gnome-sound.o
 :info:build   "_esd_sample_free", referenced from:
 :info:build       _gnome_sound_play in gnome-sound.o
 :info:build   "_esd_open_sound", referenced from:
 :info:build       _use_sound in gnome-sound.o
 :info:build ld: symbol(s) not found
 :info:build collect2: ld returned 1 exit status
 :info:build lipo: can't open input file: /var/tmp//ccruIhdc.out (No such
 file or directory)
 :info:build make[3]: *** [libgnome-2.la] Error 1
 :info:build make[2]: *** [all] Error 2
 :info:build make[1]: *** [all-recursive] Error 1
 :info:build make: *** [all] Error 2
 :info:build shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnome/work/libgnome-2.30.0"
 && /usr/bin/make -j2 all " returned error 2
 :error:build Target org.macports.build returned: shell command failed (see
 log for details)
 :debug:build Backtrace: shell command failed (see log for details)
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: the following items did not execute (for libgnome):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 :notice:build Log for libgnome is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnome/main.log

 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/29744#comment:4>
MacPorts <http://www.macports.org/>
Ports system for Mac OS