[MacPorts] #29768: playerstage-stage: Undefined symbols for architecture i386
MacPorts
noreply at macports.org
Thu Jun 9 17:37:51 PDT 2011
#29768: playerstage-stage: Undefined symbols for architecture i386
----------------------------+-----------------------------------------------
Reporter: basbaum@… | Owner: vincent@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.9.2
Keywords: | Port: playerstage-stage
----------------------------+-----------------------------------------------
Comment(by basbaum@…):
Replying to [comment:2 ryandesign@…]:
> Replying to [comment:1 ryandesign@…]:
> > "/Applications/CMake 2.8-4.app" [...] was not installed by MacPorts.
>
> Wait... was it? Do you have the cmake port installed with the +gui
variant? (I've never tried that so I don't know what it does.) What does
`port provides '/Applications/CMake 2.8-4.app/Contents/bin/cmake'` say? If
it says it is provided by the cmake port, then instead of removing it
manually, try reinstalling the cmake port without the +gui variant.
I've removed the CMake 2.8-4 app and tried to install again - failed
Follows the complete log
{{{
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main pkgconfig 0.25_2 exists in the ports tree
:debug:main pkgconfig 0.25_2 +universal is the latest installed
:debug:main pkgconfig 0.25_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! pkgconfig 0.25_2 >= pkgconfig 0.25_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main fltk 1.1.10_3 exists in the ports tree
:debug:main fltk 1.1.10_3 is the latest installed
:debug:main fltk 1.1.10_3 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/fltk
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! fltk 1.1.10_3 >= fltk 1.1.10_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8c_0 exists in the ports tree
:debug:main jpeg 8c_0 +universal is the latest installed
:debug:main jpeg 8c_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.4.7_0 exists in the ports tree
:debug:main libpng 1.4.7_0 +universal is the latest installed
:debug:main libpng 1.4.7_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libpng 1.4.7_0 >= libpng 1.4.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0 +universal is the latest installed
:debug:main zlib 1.2.5_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main playerstage-player 3.0.2_0 exists in the ports tree
:debug:main playerstage-player 3.0.2_0 +universal is the latest installed
:debug:main playerstage-player 3.0.2_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/science
/playerstage-player
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! playerstage-player 3.0.2_0 >= playerstage-
player 3.0.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gtk2 2.24.4_0 exists in the ports tree
:debug:main gtk2 2.24.4_0 +universal+x11 is the latest installed
:debug:main gtk2 2.24.4_0 +universal+x11 is active
:debug:main Merging existing variants '+universal+x11' into variants
:debug:main new fully merged portvariants: universal + x11 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main Executing variant x11 provides x11
:debug:main No need to upgrade! gtk2 2.24.4_0 >= gtk2 2.24.4_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main atk 1.32.0_0 exists in the ports tree
:debug:main atk 1.32.0_0 +universal is the latest installed
:debug:main atk 1.32.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! atk 1.32.0_0 >= atk 1.32.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main glib2 2.28.8_0 exists in the ports tree
:debug:main glib2 2.28.8_0 +universal is the latest installed
:debug:main glib2 2.28.8_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 +universal is the latest installed
:debug:main gettext 0.18.1.1_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0 +universal is the latest installed
:debug:main libiconv 1.13.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_0 exists in the ports tree
:debug:main ncurses 5.9_0 +universal is the latest installed
:debug:main ncurses 5.9_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 +universal is the latest installed
:debug:main expat 2.0.1_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.3_1 exists in the ports tree
:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
:debug:main perl5 5.12.3_1 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: perl5_12 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.3_1 exists in the ports tree
:debug:main perl5.12 5.12.3_1 +universal is the latest installed
:debug:main perl5.12 5.12.3_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main pango 1.28.4_0 exists in the ports tree
:debug:main pango 1.28.4_0 +universal+x11 is the latest installed
:debug:main pango 1.28.4_0 +universal+x11 is active
:debug:main Merging existing variants '+universal+x11' into variants
:debug:main new fully merged portvariants: universal + x11 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Executing variant x11 provides x11
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! pango 1.28.4_0 >= pango 1.28.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main cairo 1.10.2_3 exists in the ports tree
:debug:main cairo 1.10.2_3 +universal+x11 is the latest installed
:debug:main cairo 1.10.2_3 +universal+x11 is active
:debug:main Merging existing variants '+universal+x11' into variants
:debug:main new fully merged portvariants: universal + x11 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main Executing variant x11 provides x11
:debug:main No need to upgrade! cairo 1.10.2_3 >= cairo 1.10.2_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpixman 0.22.0_0 exists in the ports tree
:debug:main libpixman 0.22.0_0 +universal is the latest installed
:debug:main libpixman 0.22.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libpixman 0.22.0_0 >= libpixman 0.22.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main fontconfig 2.8.0_0 exists in the ports tree
:debug:main fontconfig 2.8.0_0 +universal is the latest installed
:debug:main fontconfig 2.8.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main freetype 2.4.4_0 exists in the ports tree
:debug:main freetype 2.4.4_0 +universal is the latest installed
:debug:main freetype 2.4.4_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! freetype 2.4.4_0 >= freetype 2.4.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xrender 0.9.6_0 exists in the ports tree
:debug:main xrender 0.9.6_0 +universal is the latest installed
:debug:main xrender 0.9.6_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.4.3_0 exists in the ports tree
:debug:main xorg-libX11 1.4.3_0 +universal is the latest installed
:debug:main xorg-libX11 1.4.3_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libX11 1.4.3_0 >= xorg-libX11 1.4.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.1.0_0 +universal is the latest installed
:debug:main xorg-libXdmcp 1.1.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp
1.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.6_0 exists in the ports tree
:debug:main xorg-libXau 1.0.6_0 +universal is the latest installed
:debug:main xorg-libXau 1.0.6_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.21_0 exists in the ports tree
:debug:main xorg-xproto 7.0.21_0 is the latest installed
:debug:main xorg-xproto 7.0.21_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-xproto 7.0.21_0 >= xorg-xproto
7.0.21_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libxcb 1.7_0 exists in the ports tree
:debug:main xorg-libxcb 1.7_0 +python27+universal is the latest installed
:debug:main xorg-libxcb 1.7_0 +python27+universal is active
:debug:main Merging existing variants '+python27+universal' into variants
:debug:main new fully merged portvariants: universal + python27 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libxcb
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant python27 provides python27
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
:debug:main xorg-xcb-proto 1.6_0 +python27 is the latest installed
:debug:main xorg-xcb-proto 1.6_0 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xcb-proto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto
1.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.8_0 exists in the ports tree
:debug:main libxml2 2.7.8_0 +universal is the latest installed
:debug:main libxml2 2.7.8_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main python27 2.7.1_3 exists in the ports tree
:debug:main python27 2.7.1_3 +universal is the latest installed
:debug:main python27 2.7.1_3 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! python27 2.7.1_3 >= python27 2.7.1_3
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0d_0 exists in the ports tree
:debug:main openssl 1.0.0d_0 +universal is the latest installed
:debug:main openssl 1.0.0d_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.6_0 exists in the ports tree
:debug:main sqlite3 3.7.6_0 +universal is the latest installed
:debug:main sqlite3 3.7.6_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0 +universal is the latest installed
:debug:main readline 6.2.000_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6 +universal is the latest installed
:debug:main db46 4.6.21_6 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.8.3_3 exists in the ports tree
:debug:main gdbm 1.8.3_3 +universal is the latest installed
:debug:main gdbm 1.8.3_3 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0 +universal is the latest installed
:debug:main bzip2 1.0.6_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python_select 0.3_1 exists in the ports tree
:debug:main python_select 0.3_1 is the latest installed
:debug:main python_select 0.3_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
:debug:main xorg-libpthread-stubs 0.3_0 is the latest installed
:debug:main xorg-libpthread-stubs 0.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libpthread-stubs
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
libpthread-stubs 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.5_0 is the latest installed
:debug:main xorg-kbproto 1.0.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
1.0.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
:debug:main xorg-renderproto 0.11.1_0 is the latest installed
:debug:main xorg-renderproto 0.11.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
renderproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
renderproto 0.11.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-util 0.3.8_0 exists in the ports tree
:debug:main xorg-xcb-util 0.3.8_0 +universal is the latest installed
:debug:main xorg-xcb-util 0.3.8_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xcb-util
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-xcb-util 0.3.8_0 >= xorg-xcb-util
0.3.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main Xft2 2.2.0_0 exists in the ports tree
:debug:main Xft2 2.2.0_0 +universal is the latest installed
:debug:main Xft2 2.2.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main gdk-pixbuf2 2.22.1_1 exists in the ports tree
:debug:main gdk-pixbuf2 2.22.1_1 +universal is the latest installed
:debug:main gdk-pixbuf2 2.22.1_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics
/gdk-pixbuf2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gdk-pixbuf2 2.22.1_1 >= gdk-pixbuf2
2.22.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main jasper 1.900.1_7 exists in the ports tree
:debug:main jasper 1.900.1_7 +universal is the latest installed
:debug:main jasper 1.900.1_7 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.5_0 exists in the ports tree
:debug:main tiff 3.9.5_0 +universal is the latest installed
:debug:main tiff 3.9.5_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXi 1.4.1_0 exists in the ports tree
:debug:main xorg-libXi 1.4.1_0 +universal is the latest installed
:debug:main xorg-libXi 1.4.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXi
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXi 1.4.1_0 >= xorg-libXi 1.4.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXext 1.3.0_0 exists in the ports tree
:debug:main xorg-libXext 1.3.0_0 +universal is the latest installed
:debug:main xorg-libXext 1.3.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext
1.3.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xextproto 7.2.0_0 exists in the ports tree
:debug:main xorg-xextproto 7.2.0_0 is the latest installed
:debug:main xorg-xextproto 7.2.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto
7.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-inputproto 2.0.1_0 exists in the ports tree
:debug:main xorg-inputproto 2.0.1_0 is the latest installed
:debug:main xorg-inputproto 2.0.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
inputproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-inputproto 2.0.1_0 >= xorg-inputproto
2.0.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXrandr 1.3.1_0 exists in the ports tree
:debug:main xorg-libXrandr 1.3.1_0 +universal is the latest installed
:debug:main xorg-libXrandr 1.3.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXrandr
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXrandr 1.3.1_0 >= xorg-libXrandr
1.3.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-randrproto 1.3.2_0 exists in the ports tree
:debug:main xorg-randrproto 1.3.2_0 is the latest installed
:debug:main xorg-randrproto 1.3.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
randrproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto
1.3.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXcursor 1.1.11_0 exists in the ports tree
:debug:main xorg-libXcursor 1.1.11_0 +universal is the latest installed
:debug:main xorg-libXcursor 1.1.11_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXcursor
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXcursor 1.1.11_0 >= xorg-
libXcursor 1.1.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXfixes 5.0_0 exists in the ports tree
:debug:main xorg-libXfixes 5.0_0 +universal is the latest installed
:debug:main xorg-libXfixes 5.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXfixes
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes
5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-fixesproto 5.0_0 exists in the ports tree
:debug:main xorg-fixesproto 5.0_0 is the latest installed
:debug:main xorg-fixesproto 5.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
fixesproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto
5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree
:debug:main xorg-libXinerama 1.1.1_0 +universal is the latest installed
:debug:main xorg-libXinerama 1.1.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXinerama
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-
libXinerama 1.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
:debug:main xorg-xineramaproto 1.2.1_0 is the latest installed
:debug:main xorg-xineramaproto 1.2.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xineramaproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-
xineramaproto 1.2.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
:debug:main xorg-libXdamage 1.1.3_0 +universal is the latest installed
:debug:main xorg-libXdamage 1.1.3_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdamage
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage
1.1.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
:debug:main xorg-damageproto 1.2.1_0 is the latest installed
:debug:main xorg-damageproto 1.2.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
damageproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-
damageproto 1.2.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
:debug:main xorg-libXcomposite 0.4.3_0 +universal is the latest installed
:debug:main xorg-libXcomposite 0.4.3_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXcomposite
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
libXcomposite 0.4.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
:debug:main xorg-compositeproto 0.4.2_0 is the latest installed
:debug:main xorg-compositeproto 0.4.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
compositeproto
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
compositeproto 0.4.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main shared-mime-info 0.90_0 exists in the ports tree
:debug:main shared-mime-info 0.90_0 +universal is the latest installed
:debug:main shared-mime-info 0.90_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
/shared-mime-info
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! shared-mime-info 0.90_0 >= shared-mime-
info 0.90_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main boost 1.46.1_0 exists in the ports tree
:debug:main boost 1.46.1_0 +universal is the latest installed
:debug:main boost 1.46.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! boost 1.46.1_0 >= boost 1.46.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main icu 4.6.1_0 exists in the ports tree
:debug:main icu 4.6.1_0 +universal is the latest installed
:debug:main icu 4.6.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! icu 4.6.1_0 >= icu 4.6.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gsl 1.14_1 exists in the ports tree
:debug:main gsl 1.14_1 +universal is the latest installed
:debug:main gsl 1.14_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/math/gsl
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gsl 1.14_1 >= gsl 1.14_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main python26 2.6.6_3 exists in the ports tree
:debug:main python26 2.6.6_3 is the latest installed
:debug:main python26 2.6.6_3 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! python26 2.6.6_3 >= python26 2.6.6_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main swig-python 2.0.4_0 exists in the ports tree
:debug:main swig-python 2.0.4_0 is the latest installed
:debug:main swig-python 2.0.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
/swig-python
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/swigbinding-1.0.tcl
:debug:main Re-registering default for distname
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! swig-python 2.0.4_0 >= swig-python 2.0.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main swig 2.0.4_0 exists in the ports tree
:debug:main swig 2.0.4_0 +universal is the latest installed
:debug:main swig 2.0.4_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! swig 2.0.4_0 >= swig 2.0.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main pcre 8.12_0 exists in the ports tree
:debug:main pcre 8.12_0 +universal is the latest installed
:debug:main pcre 8.12_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! pcre 8.12_0 >= pcre 8.12_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main swig-ruby 2.0.4_0 exists in the ports tree
:debug:main swig-ruby 2.0.4_0 is the latest installed
:debug:main swig-ruby 2.0.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
/swig-ruby
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/swigbinding-1.0.tcl
:debug:main Re-registering default for distname
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! swig-ruby 2.0.4_0 >= swig-ruby 2.0.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ruby 1.8.7-p334_0 exists in the ports tree
:debug:main ruby 1.8.7-p334_0 +thread_hooks+universal is the latest
installed
:debug:main ruby 1.8.7-p334_0 +thread_hooks+universal is active
:debug:main Merging existing variants '+thread_hooks+universal' into
variants
:debug:main new fully merged portvariants: universal + thread_hooks +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ruby
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main Executing variant thread_hooks provides thread_hooks
:debug:main No need to upgrade! ruby 1.8.7-p334_0 >= ruby 1.8.7-p334_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libtool 2.4_0 exists in the ports tree
:debug:main libtool 2.4_0 +universal is the latest installed
:debug:main libtool 2.4_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libtool 2.4_0 >= libtool 2.4_0
:msg:main ---> Computing dependencies for playerstage-stage:info:main
.:debug:main Searching for dependency: pkgconfig
:debug:main Found Dependency: receipt exists for pkgconfig
:debug:main Searching for dependency: fltk
:debug:main Found Dependency: receipt exists for fltk
:debug:main Searching for dependency: playerstage-player
:debug:main Found Dependency: receipt exists for playerstage-player
:debug:main Searching for dependency: libtool
:debug:main Found Dependency: receipt exists for libtool
:debug:main Searching for dependency: libpng
:debug:main Found Dependency: receipt exists for libpng
:debug:main Searching for dependency: jpeg
:debug:main Found Dependency: receipt exists for jpeg
:msg:main
:debug:main Executing org.macports.main (playerstage-stage)
:msg:main ---> Fetching playerstage-stage
:debug:fetch fetch phase started at Thu Jun 9 21:32:54 BRT 2011
:debug:fetch Executing org.macports.fetch (playerstage-stage)
:msg:fetch ---> Verifying checksum(s) for playerstage-stage
:debug:checksum checksum phase started at Thu Jun 9 21:32:54 BRT 2011
:debug:checksum Executing org.macports.checksum (playerstage-stage)
:info:checksum ---> Checksumming Stage-3.2.2-Source.tar.gz
:debug:checksum Correct (md5) checksum for Stage-3.2.2-Source.tar.gz
:debug:checksum Correct (sha1) checksum for Stage-3.2.2-Source.tar.gz
:debug:checksum Correct (rmd160) checksum for Stage-3.2.2-Source.tar.gz
:msg:checksum ---> Extracting playerstage-stage
:debug:extract extract phase started at Thu Jun 9 21:32:54 BRT 2011
:debug:extract Executing org.macports.extract (playerstage-stage)
:info:extract ---> Extracting Stage-3.2.2-Source.tar.gz
:debug:extract setting option extract.args to
'/opt/local/var/macports/distfiles/playerstage-
stage/Stage-3.2.2-Source.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_science_playerstage-stage/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:extract Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_science_playerstage-stage/work" && /usr/bin/gzip -dc
'/opt/local/var/macports/distfiles/playerstage-
stage/Stage-3.2.2-Source.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'
:debug:patch patch phase started at Thu Jun 9 21:32:54 BRT 2011
:debug:patch Executing org.macports.patch (playerstage-stage)
:msg:patch ---> Configuring playerstage-stage
:debug:patch Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Thu Jun 9 21:32:54 BRT 2011
:debug:configure Executing proc-pre-org.macports.configure-configure-0
:debug:configure Executing proc-pre-org.macports.configure-configure-1
:debug:configure Executing org.macports.configure (playerstage-stage)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2
-arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch
i386' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
CXX='/usr/bin/g++-4.2'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_science_playerstage-stage/work/.CC_PRINT_OPTIONS'
F90FLAGS='-pipe -O2 -m32' LDFLAGS='-L/opt/local/lib -arch i386'
OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m32' INSTALL='/usr/bin/install
-c' OBJCFLAGS='-pipe -O2 -arch i386' FFLAGS='-pipe -O2 -m32'
CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
:debug:configure Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_science_playerstage-stage/work/Stage-3.2.2-Source" &&
cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON
-DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release
-DCMAKE_BUILD_WITH_INSTALL_RPATH=ON
-DCMAKE_INSTALL_NAME_DIR=/opt/local/lib
-DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr"
-DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev
-DCMAKE_OSX_ARCHITECTURES="i386" -DCMAKE_OSX_SYSROOT=/'
:info:configure sh: cmake: command not found
:info:configure shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_science_playerstage-stage/work/Stage-3.2.2-Source" &&
cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON
-DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release
-DCMAKE_BUILD_WITH_INSTALL_RPATH=ON
-DCMAKE_INSTALL_NAME_DIR=/opt/local/lib
-DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr"
-DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev
-DCMAKE_OSX_ARCHITECTURES="i386" -DCMAKE_OSX_SYSROOT=/ " returned error
127
:error:configure Target org.macports.configure returned: configure
failure: shell command failed (see log for details)
:debug:configure Backtrace: configure failure: shell command failed (see
log for details)
while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for
playerstage-stage): org.macports.activate org.macports.configure
org.macports.build org.macports.destroot org.macports.install
:notice:configure Log for playerstage-stage is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_science_playerstage-stage/main.log
}}}
I've just installed CMake because of the ":info:configure sh: cmake:
command not found"
any ideas?
--
Ticket URL: <https://trac.macports.org/ticket/29768#comment:3>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list