[MacPorts] #28888: dynamips @0.2.7 build fails on 10.6.6; missing files
MacPorts
noreply at macports.org
Thu Mar 24 10:21:00 PDT 2011
#28888: dynamips @0.2.7 build fails on 10.6.6; missing files
------------------------------+---------------------------------------------
Reporter: jim@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.9.2
Keywords: Snow Leopard | Port:
------------------------------+---------------------------------------------
When I run 'port install dynamips' the build fails due to missing files:
{{{
:info:build dev_rom.c:22:37: error: mips64_microcode_dump.inc: No such
file or directory
:info:build dev_rom.c:29:36: error: ppc32_microcode_dump.inc: No such file
or directory
:info:build make: *** [dev_rom.o] Error 1
:info:build make: *** Waiting for unfinished jobs....
}}}
I have tried changing the DYNAMIPS_ARCH from x86 to nojit per Ticket #
22285, but I got the same results.
Here is the build log for a nojit build attempt:
{{{
cat
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dynamips/main.log
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libelf 0.8.10_1 exists in the ports tree
:debug:main libelf 0.8.10_1 is the latest installed
:debug:main libelf 0.8.10_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libelf
:debug:main OS darwin/10.7.1 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libelf 0.8.10_1 >= libelf 0.8.10_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 is the latest installed
:debug:main gettext 0.18.1.1_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.7.1 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0 is the latest installed
:debug:main libiconv 1.13.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.7.1 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.8_1 exists in the ports tree
:debug:main ncurses 5.8_1 is the latest installed
:debug:main ncurses 5.8_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.7.1 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.8_1 >= ncurses 5.8_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 is the latest installed
:debug:main expat 2.0.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.7.1 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpcap 1.1.1_0 exists in the ports tree
:debug:main libpcap 1.1.1_0 is the latest installed
:debug:main libpcap 1.1.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
:debug:main OS darwin/10.7.1 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libpcap 1.1.1_0 >= libpcap 1.1.1_0
:msg:main ---> Computing dependencies for dynamips:info:main .:debug:main
Searching for dependency: libelf
:debug:main Found Dependency: receipt exists for libelf
:debug:main Searching for dependency: libpcap
:debug:main Found Dependency: receipt exists for libpcap
:msg:main
:debug:main Executing org.macports.main (dynamips)
:debug:main Skipping completed org.macports.fetch (dynamips)
:debug:main Skipping completed org.macports.checksum (dynamips)
:debug:main Skipping completed org.macports.extract (dynamips)
:debug:main Skipping completed org.macports.patch (dynamips)
:msg:main ---> Configuring dynamips
:debug:main Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Thu Mar 24 09:58:04 PDT 2011
:debug:configure Executing org.macports.configure (dynamips)
:msg:configure ---> Building dynamips
:debug:build build phase started at Thu Mar 24 09:58:04 PDT 2011
:debug:build Executing org.macports.build (dynamips)
:debug:build Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dynamips/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:build Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dynamips/work/dynamips-0.2.7"
&& /usr/bin/make -j8 all PREFIX=/opt/local DYNAMIPS_ARCH=nojit'
:info:build Linking rom2c
:info:build Compiling mempool.c
:info:build Compiling registry.c
:info:build Compiling rbtree.c
:info:build Compiling hash.c
:info:build Compiling sbox.c
:info:build Compiling utils.c
:info:build Compiling parser.c
:info:build Compiling ptask.c
:info:build parser.c: In function 'parser_run_tests':
:info:build parser.c:341: warning: pointer targets in passing argument 2
of 'parser_scan_buffer' differ in signedness
:info:build Compiling timer.c
:info:build Compiling crc.c
:info:build Compiling base64.c
:info:build Compiling net.c
:info:build Compiling net_io.c
:info:build Compiling net_io_bridge.c
:info:build Compiling net_io_filter.c
:info:build Compiling atm.c
:info:build Compiling frame_relay.c
:info:build Compiling eth_switch.c
:info:build Compiling dynamips.c
:info:build Compiling insn_lookup.c
:info:build Compiling vm.c
:info:build Compiling cpu.c
:info:build insn_lookup.c:319: warning: 'ilt_dump' defined but not used
:info:build vm.c:112: warning: 'vm_object_rebuild_list' defined but not
used
:info:build Compiling jit_op.c
:info:build Compiling mips64.c
:info:build Compiling mips64_mem.c
:info:build Compiling mips64_cp0.c
:info:build Compiling mips64_jit.c
:info:build Compiling mips64_exec.c
:info:build mips64_mem.c: In function 'mips64_mts32_slow_lookup':
:info:build mips64_mem.c:369: warning: label 'err_address' defined but not
used
:info:build Compiling ppc32.c
:info:build mips64_exec.c: In function 'mips64_exec_run_cpu':
:info:build mips64_exec.c:408: warning: comparison between pointer and
integer
:info:build Compiling ppc32_mem.c
:info:build mips64_jit.c:258: warning: 'insn_jump_find' defined but not
used
:info:build ppc32.c: In function 'ppc32_set_idle_pc':
:info:build ppc32.c:111: warning: assignment from incompatible pointer
type
:info:build Compiling ppc32_jit.c
:info:build Compiling ppc32_exec.c
:info:build ppc32_jit.c:246: warning: 'ppc32_jit_show_hreg_status' defined
but not used
:info:build ppc32_jit.c:458: warning: 'ppc32_jit_tcb_add_end' defined but
not used
:info:build ppc32_jit.c:750: warning: 'ppc32_op_dump' defined but not used
:info:build ppc32_jit.c:838: warning: 'ppc32_check_reg_map' defined but
not used
:info:build ppc32_exec.c: In function 'ppc32_exec_run_cpu':
:info:build ppc32_exec.c:200: warning: comparison between pointer and
integer
:info:build ppc32_exec.c: In function 'ppc32_exec_MFDCR':
:info:build ppc32_exec.c:3608: warning: unused variable 'rt'
:info:build ppc32_exec.c: In function 'ppc32_exec_MTDCR':
:info:build ppc32_exec.c:3615: warning: unused variable 'rt'
:info:build Compiling ppc32_vmtest.c
:info:build ppc32_exec.c: At top level:
:info:build ppc32_exec.c:3330: warning: 'ppc32_exec_SUBFCO' defined but
not used
:info:build ppc32_exec.c:3348: warning: 'ppc32_exec_SUBFCO_dot' defined
but not used
:info:build Compiling memory.c
:info:build Compiling device.c
:info:build Compiling nmc93cX6.c
:info:build Compiling cisco_eeprom.c
:info:build Compiling pci_dev.c
:info:build Compiling pci_io.c
:info:build Compiling dev_zero.c
:info:build Compiling dev_bswap.c
:info:build Compiling dev_vtty.c
:info:build Compiling dev_ram.c
:info:build Compiling dev_rom.c
:info:build Compiling dev_nvram.c
:info:build dev_rom.c:22:37: error: mips64_microcode_dump.inc: No such
file or directory
:info:build dev_rom.c:29:36: error: ppc32_microcode_dump.inc: No such file
or directory
:info:build make: *** [dev_rom.o] Error 1
:info:build make: *** Waiting for unfinished jobs....
:info:build shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dynamips/work/dynamips-0.2.7"
&& /usr/bin/make -j8 all PREFIX=/opt/local DYNAMIPS_ARCH=nojit " returned
error 2
:error:build Target org.macports.build returned: shell command failed (see
log for details)
:debug:build Backtrace: shell command failed (see log for details)
while executing
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for dynamips):
org.macports.build
:notice:build Log for dynamips is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dynamips/main.log
}}}
--
Ticket URL: <https://trac.macports.org/ticket/28888>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list