[MacPorts] #28921: rancid: can't figure out how to pass count == 1 to /sbin/ping (was: rancid won't compile on macports 1.9.2)
MacPorts
noreply at macports.org
Sat Mar 26 23:13:27 PDT 2011
#28921: rancid: can't figure out how to pass count == 1 to /sbin/ping
-----------------------------------+----------------------------------------
Reporter: shain.singh@… | Owner: markd@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.9.2
Keywords: | Port: rancid
-----------------------------------+----------------------------------------
Changes (by ryandesign@…):
* keywords: rancid compile error =>
* owner: macports-tickets@… => markd@…
Old description:
> [shsingh at bhima]:shsingh$ sudo port -dv install rancid
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rancid
> DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Starting logging for rancid
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5 5.12.3_1 exists in the ports tree
> DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed
> DEBUG: perl5 5.12.3_1 +perl5_12 is active
> DEBUG: Merging existing variants '+perl5_12' into variants
> DEBUG: new fully merged portvariants: perl5_12 +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: universal_variant is false, so not adding the default universal
> variant
> DEBUG: Executing variant perl5_12 provides perl5_12
> DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5.12 5.12.3_1 exists in the ports tree
> DEBUG: perl5.12 5.12.3_1 is the latest installed
> DEBUG: perl5.12 5.12.3_1 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
> DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1
> DEBUG: epoch: in tree: 1 installed: 1
> DEBUG: openssl 1.0.0d_0 exists in the ports tree
> DEBUG: openssl 1.0.0d_0 +universal is the latest installed
> DEBUG: openssl 1.0.0d_0 +universal is active
> DEBUG: Merging existing variants '+universal' into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: zlib 1.2.5_0 exists in the ports tree
> DEBUG: zlib 1.2.5_0 +universal is the latest installed
> DEBUG: zlib 1.2.5_0 +universal is active
> DEBUG: Merging existing variants '+universal' into variants
> DEBUG: new fully merged portvariants: universal +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Executing variant universal provides universal
> DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-lockfile-simple 0.2.5_1 exists in the ports tree
> DEBUG: p5-lockfile-simple 0.2.5_1 is the latest installed
> DEBUG: p5-lockfile-simple 0.2.5_1 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -lockfile-simple
> DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: Re-registering default for configure.universal_args
> DEBUG: only one arch supported, so not adding the default universal
> variant
> DEBUG: No need to upgrade! p5-lockfile-simple 0.2.5_1 >= p5-lockfile-
> simple 0.2.5_1
> ---> Computing dependencies for rancid
> DEBUG: Searching for dependency: perl5
> DEBUG: Found Dependency: receipt exists for perl5
> DEBUG: Searching for dependency: openssl
> DEBUG: Found Dependency: receipt exists for openssl
> DEBUG: Searching for dependency: p5-lockfile-simple
> DEBUG: Found Dependency: receipt exists for p5-lockfile-simple
> DEBUG: Executing org.macports.main (rancid)
> DEBUG: Skipping completed org.macports.fetch (rancid)
> DEBUG: Skipping completed org.macports.checksum (rancid)
> DEBUG: Skipping completed org.macports.extract (rancid)
> DEBUG: Skipping completed org.macports.patch (rancid)
> ---> Configuring rancid
> DEBUG: Using compiler 'Mac OS X gcc 4.2'
> DEBUG: configure phase started at Sun Mar 27 15:56:29 EST 2011
> DEBUG: Executing org.macports.configure (rancid)
> DEBUG: Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch
> x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64'
> LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
> CXX='/usr/bin/g++-4.2'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/.CC_PRINT_OPTIONS'
> F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64'
> OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64'
> INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64'
> FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
> DEBUG: Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4"
> && ./configure --prefix=/opt/local --localstatedir=/opt/local/var/rancid
> --bindir=/opt/local/libexec/rancid --sysconfdir=/opt/local/etc/rancid
> --mandir=\${prefix}/share/man'
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for gmake... no
> checking for make... /usr/bin/make
> checking whether /usr/bin/make sets $(MAKE)... yes
> checking for gcc... /usr/bin/gcc-4.2
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether /usr/bin/gcc-4.2 accepts -g... yes
> checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed
> checking for style of include used by /usr/bin/make... GNU
> checking dependency style of /usr/bin/gcc-4.2... gcc3
> checking for function prototypes... yes
> checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
> checking for grep that handles long lines and -e... /usr/bin/grep
> checking for egrep... /usr/bin/grep -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking for string.h... (cached) yes
> checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for preprocessor stringizing operator... yes
> checking for ANSI C header files... (cached) yes
> checking ctype.h usability... yes
> checking ctype.h presence... yes
> checking for ctype.h... yes
> checking errno.h usability... yes
> checking errno.h presence... yes
> checking for errno.h... yes
> checking fcntl.h usability... yes
> checking fcntl.h presence... yes
> checking for fcntl.h... yes
> checking limits.h usability... yes
> checking limits.h presence... yes
> checking for limits.h... yes
> checking pty.h usability... no
> checking pty.h presence... no
> checking for pty.h... no
> checking malloc.h usability... no
> checking malloc.h presence... no
> checking for malloc.h... no
> checking for memory.h... (cached) yes
> checking siginfo.h usability... no
> checking siginfo.h presence... no
> checking for siginfo.h... no
> checking for string.h... (cached) yes
> checking for strings.h... (cached) yes
> checking stropts.h usability... no
> checking stropts.h presence... no
> checking for stropts.h... no
> checking for sys/types.h... (cached) yes
> checking sys/wait.h usability... yes
> checking sys/wait.h presence... yes
> checking for sys/wait.h... yes
> checking for unistd.h... (cached) yes
> checking util.h usability... yes
> checking util.h presence... yes
> checking for util.h... yes
> checking sysexits.h usability... yes
> checking sysexits.h presence... yes
> checking for sysexits.h... yes
> checking for memcpy... yes
> checking for memmove... yes
> checking for memset... yes
> checking for strerror... yes
> checking for strchr... yes
> checking for strrchr... yes
> checking for strstr... yes
> checking for strtok... yes
> checking for strrtok... no
> checking for index... yes
> checking for rindex... yes
> checking for unsetenv... yes
> checking for openpty... yes
> checking return type of signal handlers... void
> checking for size_t... yes
> checking whether to create the local state directory at install time...
> yes
> checking whether to install sample .conf files in sysconfdir... yes
> checking whether subversion... no
> checking whether mail addresses should be in the rancid+ form... no
> checking whether admin mail addresses should be in the rancid-admin+
> form... rancid-admin-
> checking for dirname... /usr/bin/dirname
> checking for a diff(1) that supports -u... diff -U 4
> checking for sendmail... /usr/sbin/sendmail
> checking for gnutar... gnutar
> checking for automake... ${SHELL}
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4/missing
> --run automake-1.11
> checking for perl5... /opt/local/bin/perl5
> checking for expect... /usr/bin/expect
> checking for ping... /sbin/ping
> configure: error: can't figure out how to pass count == 1 to /sbin/ping.
> shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4"
> && ./configure --prefix=/opt/local --localstatedir=/opt/local/var/rancid
> --bindir=/opt/local/libexec/rancid --sysconfdir=/opt/local/etc/rancid
> --mandir=\${prefix}/share/man " returned error 1
> Error: Target org.macports.configure returned: configure failure: shell
> command failed (see log for details)
> DEBUG: Backtrace: configure failure: shell command failed (see log for
> details)
> while executing
> "$procedure $targetname"
> Warning: the following items did not execute (for rancid):
> org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> Log for rancid is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/main.log
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
New description:
{{{
[shsingh at bhima]:shsingh$ sudo port -dv install rancid
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rancid
DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Starting logging for rancid
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.12.3_1 exists in the ports tree
DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed
DEBUG: perl5 5.12.3_1 +perl5_12 is active
DEBUG: Merging existing variants '+perl5_12' into variants
DEBUG: new fully merged portvariants: perl5_12 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: Executing variant perl5_12 provides perl5_12
DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.12 5.12.3_1 exists in the ports tree
DEBUG: perl5.12 5.12.3_1 is the latest installed
DEBUG: perl5.12 5.12.3_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 1.0.0d_0 exists in the ports tree
DEBUG: openssl 1.0.0d_0 +universal is the latest installed
DEBUG: openssl 1.0.0d_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0 +universal is the latest installed
DEBUG: zlib 1.2.5_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-lockfile-simple 0.2.5_1 exists in the ports tree
DEBUG: p5-lockfile-simple 0.2.5_1 is the latest installed
DEBUG: p5-lockfile-simple 0.2.5_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-lockfile-simple
DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: Re-registering default for configure.universal_args
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! p5-lockfile-simple 0.2.5_1 >= p5-lockfile-
simple 0.2.5_1
---> Computing dependencies for rancid
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: openssl
DEBUG: Found Dependency: receipt exists for openssl
DEBUG: Searching for dependency: p5-lockfile-simple
DEBUG: Found Dependency: receipt exists for p5-lockfile-simple
DEBUG: Executing org.macports.main (rancid)
DEBUG: Skipping completed org.macports.fetch (rancid)
DEBUG: Skipping completed org.macports.checksum (rancid)
DEBUG: Skipping completed org.macports.extract (rancid)
DEBUG: Skipping completed org.macports.patch (rancid)
---> Configuring rancid
DEBUG: Using compiler 'Mac OS X gcc 4.2'
DEBUG: configure phase started at Sun Mar 27 15:56:29 EST 2011
DEBUG: Executing org.macports.configure (rancid)
DEBUG: Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch
x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64'
LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
CXX='/usr/bin/g++-4.2'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/.CC_PRINT_OPTIONS'
F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64'
OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install
-c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64'
CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4"
&& ./configure --prefix=/opt/local --localstatedir=/opt/local/var/rancid
--bindir=/opt/local/libexec/rancid --sysconfdir=/opt/local/etc/rancid
--mandir=\${prefix}/share/man'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gmake... no
checking for make... /usr/bin/make
checking whether /usr/bin/make sets $(MAKE)... yes
checking for gcc... /usr/bin/gcc-4.2
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /usr/bin/gcc-4.2 accepts -g... yes
checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed
checking for style of include used by /usr/bin/make... GNU
checking dependency style of /usr/bin/gcc-4.2... gcc3
checking for function prototypes... yes
checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for string.h... (cached) yes
checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for preprocessor stringizing operator... yes
checking for ANSI C header files... (cached) yes
checking ctype.h usability... yes
checking ctype.h presence... yes
checking for ctype.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking pty.h usability... no
checking pty.h presence... no
checking for pty.h... no
checking malloc.h usability... no
checking malloc.h presence... no
checking for malloc.h... no
checking for memory.h... (cached) yes
checking siginfo.h usability... no
checking siginfo.h presence... no
checking for siginfo.h... no
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking stropts.h usability... no
checking stropts.h presence... no
checking for stropts.h... no
checking for sys/types.h... (cached) yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking for unistd.h... (cached) yes
checking util.h usability... yes
checking util.h presence... yes
checking for util.h... yes
checking sysexits.h usability... yes
checking sysexits.h presence... yes
checking for sysexits.h... yes
checking for memcpy... yes
checking for memmove... yes
checking for memset... yes
checking for strerror... yes
checking for strchr... yes
checking for strrchr... yes
checking for strstr... yes
checking for strtok... yes
checking for strrtok... no
checking for index... yes
checking for rindex... yes
checking for unsetenv... yes
checking for openpty... yes
checking return type of signal handlers... void
checking for size_t... yes
checking whether to create the local state directory at install time...
yes
checking whether to install sample .conf files in sysconfdir... yes
checking whether subversion... no
checking whether mail addresses should be in the rancid+ form... no
checking whether admin mail addresses should be in the rancid-admin+
form... rancid-admin-
checking for dirname... /usr/bin/dirname
checking for a diff(1) that supports -u... diff -U 4
checking for sendmail... /usr/sbin/sendmail
checking for gnutar... gnutar
checking for automake... ${SHELL}
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4/missing
--run automake-1.11
checking for perl5... /opt/local/bin/perl5
checking for expect... /usr/bin/expect
checking for ping... /sbin/ping
configure: error: can't figure out how to pass count == 1 to /sbin/ping.
shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4"
&& ./configure --prefix=/opt/local --localstatedir=/opt/local/var/rancid
--bindir=/opt/local/libexec/rancid --sysconfdir=/opt/local/etc/rancid
--mandir=\${prefix}/share/man " returned error 1
Error: Target org.macports.configure returned: configure failure: shell
command failed (see log for details)
DEBUG: Backtrace: configure failure: shell command failed (see log for
details)
while executing
"$procedure $targetname"
Warning: the following items did not execute (for rancid):
org.macports.activate org.macports.configure org.macports.build
org.macports.destroot org.macports.install
Log for rancid is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
--
--
Ticket URL: <https://trac.macports.org/ticket/28921#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list