[MacPorts] #29449: qgit install error (qt4-mac updated?)
MacPorts
noreply at macports.org
Thu May 12 22:46:32 PDT 2011
#29449: qgit install error (qt4-mac updated?)
-------------------------------+--------------------------------------------
Reporter: sheefoz@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Not set | Milestone:
Component: ports | Version: 1.9.2
Keywords: qgit qt4-mac | Port: qgit
-------------------------------+--------------------------------------------
{{{
sudo port install qgit
---> Computing dependencies for qgit
---> Fetching qgit
---> Verifying checksum(s) for qgit
---> Extracting qgit
---> Applying patches to qgit
---> Configuring qgit
Error: Target org.macports.configure returned: configure failure: shell
command failed (see log for details)
Log for qgit is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
{{{
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main pkgconfig 0.25_2 exists in the ports tree
:debug:main pkgconfig 0.25_2 +universal is the latest installed
:debug:main pkgconfig 0.25_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! pkgconfig 0.25_2 >= pkgconfig 0.25_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main qt4-mac 4.7.3_0 exists in the ports tree
:debug:main qt4-mac 4.7.3_0 +quartz+universal is the latest installed
:debug:main qt4-mac 4.7.3_0 +quartz+universal is active
:debug:main Merging existing variants '+quartz+universal' into variants
:debug:main new fully merged portvariants: universal + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant quartz provides quartz
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! qt4-mac 4.7.3_0 >= qt4-mac 4.7.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0 +universal is the latest installed
:debug:main zlib 1.2.5_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbus 1.2.24_1 exists in the ports tree
:debug:main dbus 1.2.24_1 +universal is the latest installed
:debug:main dbus 1.2.24_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! dbus 1.2.24_1 >= dbus 1.2.24_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 +universal is the latest installed
:debug:main expat 2.0.1_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0d_0 exists in the ports tree
:debug:main openssl 1.0.0d_0 +universal is the latest installed
:debug:main openssl 1.0.0d_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.6_0 exists in the ports tree
:debug:main sqlite3 3.7.6_0 +universal is the latest installed
:debug:main sqlite3 3.7.6_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0 +universal is the latest installed
:debug:main readline 6.2.000_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_0 exists in the ports tree
:debug:main ncurses 5.9_0 +universal is the latest installed
:debug:main ncurses 5.9_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.4_0 exists in the ports tree
:debug:main tiff 3.9.4_0 +universal is the latest installed
:debug:main tiff 3.9.4_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8c_0 exists in the ports tree
:debug:main jpeg 8c_0 +universal is the latest installed
:debug:main jpeg 8c_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.4.7_0 exists in the ports tree
:debug:main libpng 1.4.7_0 +universal is the latest installed
:debug:main libpng 1.4.7_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libpng 1.4.7_0 >= libpng 1.4.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libmng 1.0.10_2 exists in the ports tree
:debug:main libmng 1.0.10_2 +universal is the latest installed
:debug:main libmng 1.0.10_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main lcms 1.19_2 exists in the ports tree
:debug:main lcms 1.19_2 +universal is the latest installed
:debug:main lcms 1.19_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main git-core 1.7.5.1_0 exists in the ports tree
:debug:main git-core 1.7.5.1_0 +doc+python27+universal is the latest
installed
:debug:main git-core 1.7.5.1_0 +doc+python27+universal is active
:debug:main Merging existing variants '+doc+python27+universal' into
variants
:debug:main new fully merged portvariants: universal + doc + python27 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
/git-core
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main Executing variant python27 provides python27
:debug:main Executing variant doc provides doc
:debug:main No need to upgrade! git-core 1.7.5.1_0 >= git-core 1.7.5.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.3_1 exists in the ports tree
:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
:debug:main perl5 5.12.3_1 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: universal + perl5_12 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant universal is not provided by port perl5.
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.3_1 exists in the ports tree
:debug:main perl5.12 5.12.3_1 +universal is the latest installed
:debug:main perl5.12 5.12.3_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main curl 7.21.6_0 exists in the ports tree
:debug:main curl 7.21.6_0 +ssl+universal is the latest installed
:debug:main curl 7.21.6_0 +ssl+universal is active
:debug:main Merging existing variants '+ssl+universal' into variants
:debug:main new fully merged portvariants: universal + ssl +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main Executing variant ssl provides ssl
:debug:main No need to upgrade! curl 7.21.6_0 >= curl 7.21.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libidn 1.22_0 exists in the ports tree
:debug:main libidn 1.22_0 +universal is the latest installed
:debug:main libidn 1.22_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libidn 1.22_0 >= libidn 1.22_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0 +universal is the latest installed
:debug:main libiconv 1.13.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 +universal is the latest installed
:debug:main gettext 0.18.1.1_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main curl-ca-bundle 7.21.6_0 exists in the ports tree
:debug:main curl-ca-bundle 7.21.6_0 is the latest installed
:debug:main curl-ca-bundle 7.21.6_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-
ca-bundle
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant universal is not provided by port curl-ca-
bundle.
:debug:main No need to upgrade! curl-ca-bundle 7.21.6_0 >= curl-ca-bundle
7.21.6_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main python27 2.7.1_2 exists in the ports tree
:debug:main python27 2.7.1_2 +universal is the latest installed
:debug:main python27 2.7.1_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! python27 2.7.1_2 >= python27 2.7.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6 +universal is the latest installed
:debug:main db46 4.6.21_6 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.8.3_3 exists in the ports tree
:debug:main gdbm 1.8.3_3 +universal is the latest installed
:debug:main gdbm 1.8.3_3 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0 +universal is the latest installed
:debug:main bzip2 1.0.6_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main rsync 3.0.7_1 exists in the ports tree
:debug:main rsync 3.0.7_1 +universal is the latest installed
:debug:main rsync 3.0.7_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rsync
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! rsync 3.0.7_1 >= rsync 3.0.7_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main popt 1.16_0 exists in the ports tree
:debug:main popt 1.16_0 +universal is the latest installed
:debug:main popt 1.16_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! popt 1.16_0 >= popt 1.16_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5-error 0.17016_1 exists in the ports tree
:debug:main p5-error 0.17016_1 is the latest installed
:debug:main p5-error 0.17016_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-error
:debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for configure.universal_args
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Requested variant universal is not provided by port p5-error.
:debug:main No need to upgrade! p5-error 0.17016_1 >= p5-error 0.17016_1
:msg:main ---> Computing dependencies for qgit:info:main .:debug:main
Searching for dependency: pkgconfig
:debug:main Found Dependency: receipt exists for pkgconfig
:debug:main Searching for dependency: qt4-mac
:debug:main Found Dependency: receipt exists for qt4-mac
:debug:main Searching for dependency: git-core
:debug:main Found Dependency: receipt exists for git-core
:msg:main
:debug:main Executing org.macports.main (qgit)
:msg:main ---> Fetching qgit
:debug:fetch fetch phase started at Fri May 13 07:43:08 EEST 2011
:debug:fetch Executing org.macports.fetch (qgit)
:msg:fetch ---> Verifying checksum(s) for qgit
:debug:checksum checksum phase started at Fri May 13 07:43:08 EEST 2011
:debug:checksum Executing org.macports.checksum (qgit)
:info:checksum ---> Checksumming qgit-2.2.tar.bz2
:debug:checksum Correct (md5) checksum for qgit-2.2.tar.bz2
:debug:checksum setting option extract.cmd to /usr/bin/bzip2
:msg:checksum ---> Extracting qgit
:debug:extract extract phase started at Fri May 13 07:43:08 EEST 2011
:debug:extract Executing proc-pre-org.macports.extract-extract-0
:debug:extract Executing org.macports.extract (qgit)
:info:extract ---> Extracting qgit-2.2.tar.bz2
:debug:extract setting option extract.args to
'/opt/local/var/macports/distfiles/qgit/qgit-2.2.tar.bz2'
:debug:extract Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:extract Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work"
&& /usr/bin/bzip2 -dc
'/opt/local/var/macports/distfiles/qgit/qgit-2.2.tar.bz2' |
/usr/bin/gnutar --no-same-owner -xf -'
:debug:patch patch phase started at Fri May 13 07:43:08 EEST 2011
:debug:patch Executing org.macports.patch (qgit)
:msg:patch ---> Applying patches to qgit
:info:patch ---> Applying
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qgit/files/patch_src_namespace_def.cpp.diff
:debug:patch Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/qgit"
&& /usr/bin/patch -p0'
:info:patch patching file src/namespace_def.cpp
:info:patch ---> Applying
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qgit/files/patch_src_qgit.cpp.diff
:debug:patch Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/qgit"
&& /usr/bin/patch -p0'
:info:patch patching file src/qgit.cpp
:debug:patch Executing proc-post-org.macports.patch-patch-0
:msg:patch ---> Configuring qgit
:debug:patch Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Fri May 13 07:43:08 EEST 2011
:debug:configure Executing org.macports.configure (qgit)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2
-arch x86_64 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe
-O2 -arch x86_64 -arch i386' LIBRARY_PATH='/opt/local/lib'
MACOSX_DEPLOYMENT_TARGET='10.6' PKG_CONFIG_PATH='/opt/local/lib/pkgconfig'
CXX='/usr/bin/g++-4.2'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/.CC_PRINT_OPTIONS'
F90FLAGS='-pipe -O2' LDFLAGS='-L/opt/local/lib -arch x86_64 -arch i386'
FCFLAGS='-pipe -O2' OBJC='/usr/bin/gcc-4.2' INSTALL='/usr/bin/install -c'
MOC='/opt/local/bin/moc' FFLAGS='-pipe -O2' OBJCFLAGS='-pipe -O2 -arch
x86_64 -arch i386' QTDIR='/opt/local' CC_PRINT_OPTIONS='YES'
CC='/usr/bin/gcc-4.2' QMAKE='/opt/local/bin/qmake'
:debug:configure Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/qgit"
&& /opt/local/bin/qmake --disable-dependency-tracking'
:info:configure ***Unknown option --disable-dependency-tracking
:info:configure Usage: /opt/local/bin/qmake [mode] [options] [files]
:info:configure
:info:configure QMake has two modes, one mode for generating project files
based on
:info:configure some heuristics, and the other for generating makefiles.
Normally you
:info:configure shouldn't need to specify a mode, as makefile generation
is the default
:info:configure mode for qmake, but you may use this to test qmake on an
existing project
:info:configure
:info:configure Mode:
:info:configure -project Put qmake into project file generation
mode
:info:configure In this mode qmake interprets files as
files to
:info:configure be built,
:info:configure defaults to *.c; *.ui; *.y; *.l; *.ts;
*.xlf; *.qrc; *.h; *.hpp; *.hh; *.hxx; *.H; *.cpp; *.cc; *.cxx; *.C
:info:configure Note: The created .pro file probably will
:info:configure need to be edited. For example add the QT
variable to
:info:configure specify what modules are required.
:info:configure -makefile Put qmake into makefile generation mode
(default)
:info:configure In this mode qmake interprets files as
project files to
:info:configure be processed, if skipped qmake will try
to find a project
:info:configure file in your current working directory
:info:configure
:info:configure Warnings Options:
:info:configure -Wnone Turn off all warnings; specific ones may
be re-enabled by
:info:configure later -W options
:info:configure -Wall Turn on all warnings
:info:configure -Wparser Turn on parser warnings
:info:configure -Wlogic Turn on logic warnings (on by default)
:info:configure -Wdeprecated Turn on deprecation warnings (on by
default)
:info:configure
:info:configure Options:
:info:configure * You can place any variable assignment in options and
it will be *
:info:configure * processed as if it was in [files]. These assignments
will be parsed *
:info:configure * before [files].
*
:info:configure -o file Write output to file
:info:configure -d Increase debug level
:info:configure -t templ Overrides TEMPLATE as templ
:info:configure -tp prefix Overrides TEMPLATE so that prefix is
prefixed into the value
:info:configure -help This help
:info:configure -v Version information
:info:configure -after All variable assignments after this will
be
:info:configure parsed after [files]
:info:configure -norecursive Don't do a recursive search
:info:configure -recursive Do a recursive search
:info:configure -set <prop> <value> Set persistent property
:info:configure -query <prop> Query persistent property. Show all if
<prop> is empty.
:info:configure -cache file Use file as cache [makefile
mode only]
:info:configure -spec spec Use spec as QMAKESPEC [makefile
mode only]
:info:configure -nocache Don't use a cache file [makefile
mode only]
:info:configure -nodepend Don't generate dependencies [makefile
mode only]
:info:configure -nomoc Don't generate moc targets [makefile
mode only]
:info:configure -nopwd Don't look for files in pwd [project mode
only]
:info:configure shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/qgit"
&& /opt/local/bin/qmake --disable-dependency-tracking " returned error 1
:error:configure Target org.macports.configure returned: configure
failure: shell command failed (see log for details)
:debug:configure Backtrace: configure failure: shell command failed (see
log for details)
while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for qgit):
org.macports.activate org.macports.configure org.macports.build
org.macports.destroot org.macports.install
:notice:configure Log for qgit is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/main.log
}}}
Note: i am new ot mac, that being said, my opinion is that qt4 got updated
and qgit is trying to use qmake with invalid old syntax ?
--
Ticket URL: <https://trac.macports.org/ticket/29449>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list