[MacPorts] #31770: tiemu3 error: GtkFunction undeclared (first use in this function)

Tue Oct 25 10:23:56 PDT 2011

#31770: tiemu3 error: GtkFunction undeclared (first use in this function)
-----------------------------------------+----------------------------------
 Reporter:  michael.mrejen@…             |       Owner:  macports-tickets@…                   
     Type:  defect                       |      Status:  new                                  
 Priority:  Normal                       |   Milestone:                                       
Component:  ports                        |     Version:  2.0.3                                
 Keywords:  tiemu3                       |        Port:  tiemu3                               
-----------------------------------------+----------------------------------
 Hi,
 I've a problem installing tiemu3. the same problem has been reported 3
 months ago but I cannot find a remedy to it.
 here is my log.
 thanks

 {{{
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main pkgconfig 0.26_0 exists in the ports tree
 :debug:main pkgconfig 0.26_0  is the latest installed
 :debug:main pkgconfig 0.26_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main glib2 2.28.8_0 exists in the ports tree
 :debug:main glib2 2.28.8_0  is the latest installed
 :debug:main glib2 2.28.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2  is the latest installed
 :debug:main gettext 0.18.1.1_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.14_0 exists in the ports tree
 :debug:main libiconv 1.14_0  is the latest installed
 :debug:main libiconv 1.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.9_1 exists in the ports tree
 :debug:main ncurses 5.9_1  is the latest installed
 :debug:main ncurses 5.9_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_1 exists in the ports tree
 :debug:main expat 2.0.1_1  is the latest installed
 :debug:main expat 2.0.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.5_0 exists in the ports tree
 :debug:main zlib 1.2.5_0  is the latest installed
 :debug:main zlib 1.2.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5 5.12.3_1 exists in the ports tree
 :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
 :debug:main perl5 5.12.3_1 +perl5_12 is active
 :debug:main Merging existing variants '+perl5_12' into variants
 :debug:main new fully merged portvariants: perl5_12 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Executing variant perl5_12 provides perl5_12
 :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5.12 5.12.3_2 exists in the ports tree
 :debug:main perl5.12 5.12.3_2  is the latest installed
 :debug:main perl5.12 5.12.3_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdbm 1.9.1_0 exists in the ports tree
 :debug:main gdbm 1.9.1_0  is the latest installed
 :debug:main gdbm 1.9.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0
 :debug:main Found Dependency: path: /usr/bin filename: grep regex: ^grep$
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main groff 1.21_1 exists in the ports tree
 :debug:main groff 1.21_1  is the latest installed
 :debug:main groff 1.21_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! groff 1.21_1 >= groff 1.21_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ghostscript 9.04_1 exists in the ports tree
 :debug:main ghostscript 9.04_1  is the latest installed
 :debug:main ghostscript 9.04_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! ghostscript 9.04_1 >= ghostscript 9.04_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main fontconfig 2.8.0_0 exists in the ports tree
 :debug:main fontconfig 2.8.0_0  is the latest installed
 :debug:main fontconfig 2.8.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main freetype 2.4.7_0 exists in the ports tree
 :debug:main freetype 2.4.7_0  is the latest installed
 :debug:main freetype 2.4.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! freetype 2.4.7_0 >= freetype 2.4.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0  is the latest installed
 :debug:main bzip2 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jpeg 8c_0 exists in the ports tree
 :debug:main jpeg 8c_0  is the latest installed
 :debug:main jpeg 8c_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libidn 1.22_0 exists in the ports tree
 :debug:main libidn 1.22_0  is the latest installed
 :debug:main libidn 1.22_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libidn 1.22_0 >= libidn 1.22_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpaper 1.1.24_0 exists in the ports tree
 :debug:main libpaper 1.1.24_0  is the latest installed
 :debug:main libpaper 1.1.24_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/libpaper
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libpaper 1.1.24_0 >= libpaper 1.1.24_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpng 1.4.8_0 exists in the ports tree
 :debug:main libpng 1.4.8_0  is the latest installed
 :debug:main libpng 1.4.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main tiff 3.9.5_0 exists in the ports tree
 :debug:main tiff 3.9.5_0  is the latest installed
 :debug:main tiff 3.9.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXext 1.3.0_0 exists in the ports tree
 :debug:main xorg-libXext 1.3.0_0  is the latest installed
 :debug:main xorg-libXext 1.3.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext
 1.3.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libX11 1.4.4_0 exists in the ports tree
 :debug:main xorg-libX11 1.4.4_0  is the latest installed
 :debug:main xorg-libX11 1.4.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libX11 1.4.4_0 >= xorg-libX11 1.4.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
 :debug:main xorg-libXdmcp 1.1.0_0  is the latest installed
 :debug:main xorg-libXdmcp 1.1.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp
 1.1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXau 1.0.6_0 exists in the ports tree
 :debug:main xorg-libXau 1.0.6_0  is the latest installed
 :debug:main xorg-libXau 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xproto 7.0.22_0 exists in the ports tree
 :debug:main xorg-xproto 7.0.22_0  is the latest installed
 :debug:main xorg-xproto 7.0.22_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xproto 7.0.22_0 >= xorg-xproto
 7.0.22_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libxcb 1.7_0 exists in the ports tree
 :debug:main xorg-libxcb 1.7_0 +python27 is the latest installed
 :debug:main xorg-libxcb 1.7_0 +python27 is active
 :debug:main Merging existing variants '+python27' into variants
 :debug:main new fully merged portvariants: python27 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libxcb
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant python27 provides python27
 :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
 :debug:main xorg-xcb-proto 1.6_0 +python27 is the latest installed
 :debug:main xorg-xcb-proto 1.6_0 +python27 is active
 :debug:main Merging existing variants '+python27' into variants
 :debug:main new fully merged portvariants: python27 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-proto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Executing variant python27 provides python27
 :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto
 1.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxml2 2.7.8_0 exists in the ports tree
 :debug:main libxml2 2.7.8_0  is the latest installed
 :debug:main libxml2 2.7.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main python27 2.7.2_1 exists in the ports tree
 :debug:main python27 2.7.2_1  is the latest installed
 :debug:main python27 2.7.2_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! python27 2.7.2_1 >= python27 2.7.2_1
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.0e_1 exists in the ports tree
 :debug:main openssl 1.0.0e_1  is the latest installed
 :debug:main openssl 1.0.0e_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main sqlite3 3.7.8_1 exists in the ports tree
 :debug:main sqlite3 3.7.8_1  is the latest installed
 :debug:main sqlite3 3.7.8_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! sqlite3 3.7.8_1 >= sqlite3 3.7.8_1
 :debug:main epoch: in tree: 20090923 installed: 20090923
 :debug:main libedit 20110802-3.0_0 exists in the ports tree
 :debug:main libedit 20110802-3.0_0  is the latest installed
 :debug:main libedit 20110802-3.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit
 20110802-3.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main db46 4.6.21_6 exists in the ports tree
 :debug:main db46 4.6.21_6  is the latest installed
 :debug:main db46 4.6.21_6  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant java provides java
 :debug:main Skipping upgrade since db46 4.6.21_6 >= db46 4.6.21_6, even
 though installed variants "" do not match "+java".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main readline 6.2.000_0 exists in the ports tree
 :debug:main readline 6.2.000_0  is the latest installed
 :debug:main readline 6.2.000_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python_select 0.3_1 exists in the ports tree
 :debug:main python_select 0.3_1  is the latest installed
 :debug:main python_select 0.3_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
 :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
 :debug:main xorg-libpthread-stubs 0.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libpthread-stubs
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
 libpthread-stubs 0.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
 :debug:main xorg-kbproto 1.0.5_0  is the latest installed
 :debug:main xorg-kbproto 1.0.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
 1.0.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xextproto 7.2.0_0 exists in the ports tree
 :debug:main xorg-xextproto 7.2.0_0  is the latest installed
 :debug:main xorg-xextproto 7.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto
 7.2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXt 1.1.1_0 exists in the ports tree
 :debug:main xorg-libXt 1.1.1_0  is the latest installed
 :debug:main xorg-libXt 1.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXt
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXt 1.1.1_0 >= xorg-libXt 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libsm 1.2.0_0 exists in the ports tree
 :debug:main xorg-libsm 1.2.0_0  is the latest installed
 :debug:main xorg-libsm 1.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libsm
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libsm 1.2.0_0 >= xorg-libsm 1.2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libice 1.0.7_0 exists in the ports tree
 :debug:main xorg-libice 1.0.7_0  is the latest installed
 :debug:main xorg-libice 1.0.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libice
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libice 1.0.7_0 >= xorg-libice 1.0.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main psutils p17_1 exists in the ports tree
 :debug:main psutils p17_1  is the latest installed
 :debug:main psutils p17_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/psutils
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! psutils p17_1 >= psutils p17_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main netpbm 10.47.31_0 exists in the ports tree
 :debug:main netpbm 10.47.31_0  is the latest installed
 :debug:main netpbm 10.47.31_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/netpbm
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! netpbm 10.47.31_0 >= netpbm 10.47.31_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jasper 1.900.1_8 exists in the ports tree
 :debug:main jasper 1.900.1_8  is the latest installed
 :debug:main jasper 1.900.1_8  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! jasper 1.900.1_8 >= jasper 1.900.1_8
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jbigkit 2.0_2 exists in the ports tree
 :debug:main jbigkit 2.0_2  is the latest installed
 :debug:main jbigkit 2.0_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jbigkit
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! jbigkit 2.0_2 >= jbigkit 2.0_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libticonv 1.1.1_0 exists in the ports tree
 :debug:main libticonv 1.1.1_0  is the latest installed
 :debug:main libticonv 1.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/libticonv
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libticonv 1.1.1_0 >= libticonv 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libusb-compat 0.1.3_0 exists in the ports tree
 :debug:main libusb-compat 0.1.3_0  is the latest installed
 :debug:main libusb-compat 0.1.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libusb-compat
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libusb-compat 0.1.3_0 >= libusb-compat
 0.1.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libusb 1.0.8_0 exists in the ports tree
 :debug:main libusb 1.0.8_0  is the latest installed
 :debug:main libusb 1.0.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libusb 1.0.8_0 >= libusb 1.0.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libtifiles2 1.1.3_0 exists in the ports tree
 :debug:main libtifiles2 1.1.3_0  is the latest installed
 :debug:main libtifiles2 1.1.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/libtifiles2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libtifiles2 1.1.3_0 >= libtifiles2 1.1.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libticables2 1.3.1_0 exists in the ports tree
 :debug:main libticables2 1.3.1_0  is the latest installed
 :debug:main libticables2 1.3.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/libticables2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libticables2 1.3.1_0 >= libticables2
 1.3.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libticalcs2 1.1.5_0 exists in the ports tree
 :debug:main libticalcs2 1.1.5_0  is the latest installed
 :debug:main libticalcs2 1.1.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/libticalcs2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libticalcs2 1.1.5_0 >= libticalcs2 1.1.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gtk2 2.24.6_0 exists in the ports tree
 :debug:main gtk2 2.24.6_0 +x11 is the latest installed
 :debug:main gtk2 2.24.6_0 +x11 is active
 :debug:main Merging existing variants '+x11' into variants
 :debug:main new fully merged portvariants: x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! gtk2 2.24.6_0 >= gtk2 2.24.6_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main atk 1.32.0_0 exists in the ports tree
 :debug:main atk 1.32.0_0  is the latest installed
 :debug:main atk 1.32.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! atk 1.32.0_0 >= atk 1.32.0_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main pango 1.28.4_1 exists in the ports tree
 :debug:main pango 1.28.4_1 +x11 is the latest installed
 :debug:main pango 1.28.4_1 +x11 is active
 :debug:main Merging existing variants '+x11' into variants
 :debug:main new fully merged portvariants: x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! pango 1.28.4_1 >= pango 1.28.4_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cairo 1.10.2_4 exists in the ports tree
 :debug:main cairo 1.10.2_4 +x11 is the latest installed
 :debug:main cairo 1.10.2_4 +x11 is active
 :debug:main Merging existing variants '+x11' into variants
 :debug:main new fully merged portvariants: x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! cairo 1.10.2_4 >= cairo 1.10.2_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpixman 0.22.2_1 exists in the ports tree
 :debug:main libpixman 0.22.2_1  is the latest installed
 :debug:main libpixman 0.22.2_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libpixman 0.22.2_1 >= libpixman 0.22.2_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xrender 0.9.6_1 exists in the ports tree
 :debug:main xrender 0.9.6_1  is the latest installed
 :debug:main xrender 0.9.6_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xrender 0.9.6_1 >= xrender 0.9.6_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
 :debug:main xorg-renderproto 0.11.1_0  is the latest installed
 :debug:main xorg-renderproto 0.11.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
 renderproto 0.11.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-util 0.3.8_0 exists in the ports tree
 :debug:main xorg-xcb-util 0.3.8_0  is the latest installed
 :debug:main xorg-xcb-util 0.3.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-util
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-xcb-util 0.3.8_0 >= xorg-xcb-util
 0.3.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main Xft2 2.2.0_0 exists in the ports tree
 :debug:main Xft2 2.2.0_0  is the latest installed
 :debug:main Xft2 2.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main gdk-pixbuf2 2.22.1_1 exists in the ports tree
 :debug:main gdk-pixbuf2 2.22.1_1  is the latest installed
 :debug:main gdk-pixbuf2 2.22.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics
 /gdk-pixbuf2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gdk-pixbuf2 2.22.1_1 >= gdk-pixbuf2
 2.22.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXi 1.4.3_0 exists in the ports tree
 :debug:main xorg-libXi 1.4.3_0  is the latest installed
 :debug:main xorg-libXi 1.4.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXi
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXi 1.4.3_0 >= xorg-libXi 1.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-inputproto 2.0.2_0 exists in the ports tree
 :debug:main xorg-inputproto 2.0.2_0  is the latest installed
 :debug:main xorg-inputproto 2.0.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-inputproto 2.0.2_0 >= xorg-inputproto
 2.0.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree
 :debug:main xorg-libXrandr 1.3.2_0  is the latest installed
 :debug:main xorg-libXrandr 1.3.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr
 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-randrproto 1.3.2_0 exists in the ports tree
 :debug:main xorg-randrproto 1.3.2_0  is the latest installed
 :debug:main xorg-randrproto 1.3.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 randrproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto
 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcursor 1.1.12_0 exists in the ports tree
 :debug:main xorg-libXcursor 1.1.12_0  is the latest installed
 :debug:main xorg-libXcursor 1.1.12_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcursor
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXcursor 1.1.12_0 >= xorg-
 libXcursor 1.1.12_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXfixes 5.0_0 exists in the ports tree
 :debug:main xorg-libXfixes 5.0_0  is the latest installed
 :debug:main xorg-libXfixes 5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXfixes
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes
 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-fixesproto 5.0_0 exists in the ports tree
 :debug:main xorg-fixesproto 5.0_0  is the latest installed
 :debug:main xorg-fixesproto 5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 fixesproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto
 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree
 :debug:main xorg-libXinerama 1.1.1_0  is the latest installed
 :debug:main xorg-libXinerama 1.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXinerama
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-
 libXinerama 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-xineramaproto 1.2.1_0  is the latest installed
 :debug:main xorg-xineramaproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xineramaproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-
 xineramaproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
 :debug:main xorg-libXdamage 1.1.3_0  is the latest installed
 :debug:main xorg-libXdamage 1.1.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdamage
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage
 1.1.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-damageproto 1.2.1_0  is the latest installed
 :debug:main xorg-damageproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 damageproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-
 damageproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
 :debug:main xorg-libXcomposite 0.4.3_0  is the latest installed
 :debug:main xorg-libXcomposite 0.4.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcomposite
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
 libXcomposite 0.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
 :debug:main xorg-compositeproto 0.4.2_0  is the latest installed
 :debug:main xorg-compositeproto 0.4.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 compositeproto
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
 compositeproto 0.4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main shared-mime-info 0.91_0 exists in the ports tree
 :debug:main shared-mime-info 0.91_0  is the latest installed
 :debug:main shared-mime-info 0.91_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /shared-mime-info
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! shared-mime-info 0.91_0 >= shared-mime-
 info 0.91_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libglade2 2.6.4_4 exists in the ports tree
 :debug:main libglade2 2.6.4_4  is the latest installed
 :debug:main libglade2 2.6.4_4  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libglade2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main No need to upgrade! libglade2 2.6.4_4 >= libglade2 2.6.4_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libsdl 1.2.14_9 exists in the ports tree
 :debug:main libsdl 1.2.14_9 +x11 is the latest installed
 :debug:main libsdl 1.2.14_9 +x11 is active
 :debug:main Merging existing variants '+x11' into variants
 :debug:main new fully merged portvariants: x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! libsdl 1.2.14_9 >= libsdl 1.2.14_9
 :msg:main --->  Computing dependencies for tiemu3:info:main .:debug:main
 Searching for dependency: pkgconfig
 :debug:main Found Dependency: receipt exists for pkgconfig
 :debug:main Searching for dependency: grep
 :debug:main Didn't find receipt, going to depspec regex for: grep
 :debug:main Found Dependency: path: /usr/bin filename: grep regex: ^grep$
 :debug:main Found Dependency: path: /usr/bin filename: grep regex: ^grep$
 :debug:main Searching for dependency: groff
 :debug:main Found Dependency: receipt exists for groff
 :debug:main Searching for dependency: libiconv
 :debug:main Found Dependency: receipt exists for libiconv
 :debug:main Searching for dependency: libticonv
 :debug:main Found Dependency: receipt exists for libticonv
 :debug:main Searching for dependency: libtifiles2
 :debug:main Found Dependency: receipt exists for libtifiles2
 :debug:main Searching for dependency: libticables2
 :debug:main Found Dependency: receipt exists for libticables2
 :debug:main Searching for dependency: libticalcs2
 :debug:main Found Dependency: receipt exists for libticalcs2
 :debug:main Searching for dependency: gettext
 :debug:main Found Dependency: receipt exists for gettext
 :debug:main Searching for dependency: gtk2
 :debug:main Found Dependency: receipt exists for gtk2
 :debug:main Searching for dependency: libglade2
 :debug:main Found Dependency: receipt exists for libglade2
 :debug:main Searching for dependency: libsdl
 :debug:main Found Dependency: receipt exists for libsdl
 :msg:main
 :debug:main Executing org.macports.main (tiemu3)
 :debug:main changing euid/egid - current euid: 0 - current egid: 0
 :debug:main egid changed to: 502
 :debug:main euid changed to: 503
 :debug:main Skipping completed org.macports.archivefetch (tiemu3)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.fetch (tiemu3)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.checksum (tiemu3)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.extract (tiemu3)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.patch (tiemu3)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.configure (tiemu3)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:build build phase started at Tue Oct 25 09:59:28 PDT 2011
 :notice:build --->  Building tiemu3
 :debug:build Executing org.macports.build (tiemu3)
 :debug:build Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:build Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02"
 && /usr/bin/make -j2 -w all'
 :debug:build Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02"
 && /usr/bin/make -j2 -w all
 :info:build make: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02'
 :info:build /usr/bin/make  all-recursive
 :info:build make[1]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02'
 :info:build Making all in build
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/build'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/build'
 :info:build Making all in glade
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/glade'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/glade'
 :info:build Making all in help
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/help'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/help'
 :info:build Making all in misc
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/misc'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/misc'
 :info:build Making all in pedrom
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/pedrom'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/pedrom'
 :info:build Making all in pixmaps
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/pixmaps'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/pixmaps'
 :info:build Making all in po
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/po'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/po'
 :info:build Making all in skins
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/skins'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/skins'
 :info:build Making all in src
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/src'
 :info:build cd core/uae && /usr/bin/make CC="/usr/bin/gcc-4.2"
 CFLAGS="-pipe -O2 -arch x86_64 -D__I386__ -D__MACOSX__ -fvisibility=hidden
 -DGTK_DISABLE_DEPRECATED -DDEBUGGER -DNO_GDB -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -D_REENTRANT
 -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include
 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
 -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0
 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2
 -I/opt/local/include/libpng14   -D_REENTRANT
 -I/opt/local/include/libglade-2.0 -I/opt/local/include/gtk-2.0
 -I/opt/local/include/libxml2 -I/opt/local/lib/gtk-2.0/include
 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
 -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0
 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2
 -I/opt/local/include/libpng14   -I/opt/local/include/SDL -D_GNU_SOURCE=1
 -D_THREAD_SAFE " gen
 :info:build make[3]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/src/core/uae'
 :info:build make[3]: Nothing to be done for `gen'.
 :info:build make[3]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/src/core/uae'
 :info:build cd core/uae && /usr/bin/make CC="/usr/bin/gcc-4.2"
 CFLAGS="-pipe -O2 -arch x86_64 -D__I386__ -D__MACOSX__ -fvisibility=hidden
 -DGTK_DISABLE_DEPRECATED -DDEBUGGER -DNO_GDB -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -D_REENTRANT
 -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include
 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
 -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0
 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2
 -I/opt/local/include/libpng14   -D_REENTRANT
 -I/opt/local/include/libglade-2.0 -I/opt/local/include/gtk-2.0
 -I/opt/local/include/libxml2 -I/opt/local/lib/gtk-2.0/include
 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
 -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0
 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2
 -I/opt/local/include/libpng14   -I/opt/local/include/SDL -D_GNU_SOURCE=1
 -D_THREAD_SAFE " all
 :info:build make[3]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/src/core/uae'
 :info:build make[3]: Nothing to be done for `all'.
 :info:build make[3]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/src/core/uae'
 :info:build /usr/bin/gcc-4.2 -I.. -I -DPREFIX=\"/opt/local\" -I. -I./core
 -I./core/uae -I./core/ti_hw -I./core/ti_sw -I./core/dbg -I./sound -I./gui
 -I./gui/calc -I./gui/debugger -I./ipc/dcop -I./ipc/dbus -I./ipc/com
 -I./kde -I./misc -DHAVE_CONFIG_H -DSHARE_DIR=\"/opt/local/share/tiemu\"
 -DLOCALEDIR=\"/opt/local/share/locale\" -c -pipe -O2 -arch x86_64
 -D__I386__ -D__MACOSX__ -fvisibility=hidden -DGTK_DISABLE_DEPRECATED
 -DDEBUGGER -DNO_GDB -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/tilp2
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include   -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -D_REENTRANT
 -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include
 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
 -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0
 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2
 -I/opt/local/include/libpng14   -D_REENTRANT
 -I/opt/local/include/libglade-2.0 -I/opt/local/include/gtk-2.0
 -I/opt/local/include/libxml2 -I/opt/local/lib/gtk-2.0/include
 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
 -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0
 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include
 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2
 -I/opt/local/include/libpng14   -I/opt/local/include/SDL -D_GNU_SOURCE=1
 -D_THREAD_SAFE  gui/calc/calc.c -o gui/calc/calc.o
 :info:build gui/calc/calc.c: In function â€˜hid_initâ€™:
 :info:build gui/calc/calc.c:589: error: â€˜GtkFunctionâ€™ undeclared
 (first use in this function)
 :info:build gui/calc/calc.c:589: error: (Each undeclared identifier is
 reported only once
 :info:build gui/calc/calc.c:589: error: for each function it appears in.)
 :info:build gui/calc/calc.c:589: error: expected â€˜)â€™ before
 â€˜hid_refreshâ€™
 :info:build gui/calc/calc.c:589: error: too few arguments to function
 â€˜g_timeout_addâ€™
 :info:build gui/calc/calc.c: In function â€˜hid_lcd_rate_setâ€™:
 :info:build gui/calc/calc.c:643: error: â€˜GtkFunctionâ€™ undeclared
 (first use in this function)
 :info:build gui/calc/calc.c:643: error: expected â€˜)â€™ before
 â€˜hid_refreshâ€™
 :info:build gui/calc/calc.c:643: error: too few arguments to function
 â€˜g_timeout_addâ€™
 :info:build make[2]: *** [gui/calc/calc.o] Error 1
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/src'
 :info:build make[1]: *** [all-recursive] Error 1
 :info:build make[1]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02'
 :info:build make: *** [all] Error 2
 :info:build make: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02'
 :info:build shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02"
 && /usr/bin/make -j2 -w all " returned error 2
 :error:build Target org.macports.build returned: shell command failed (see
 log for details)
 :debug:build Backtrace: shell command failed (see log for details)
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: the following items did not execute (for tiemu3):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 :notice:build Log for tiemu3 is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/main.log
 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/31770>
MacPorts <http://www.macports.org/>
Ports system for Mac OS