[MacPorts] #31212: pkgconfig 0.26 checksum
MacPorts
noreply at macports.org
Sat Sep 10 20:58:33 PDT 2011
#31212: pkgconfig 0.26 checksum
------------------------------------------+---------------------------------
Reporter: francescoagnoletto@… | Owner: ryandesign@…
Type: defect | Status: assigned
Priority: Normal | Milestone:
Component: ports | Version: 2.0.3
Keywords: | Port: pkgconfig
------------------------------------------+---------------------------------
Changes (by ryandesign@…):
* owner: macports-tickets@… => ryandesign@…
* status: new => assigned
Old description:
> I'm trying to install imagemagick on OSX 10.7
> The problem on i'm blocked is on pkgconfig
>
> sudo port checksum pkgconfig
> ---> Fetching pkgconfig
> ---> Attempting to fetch pkg-config-0.26.tar.gz from
> http://www.vg.kernel.org/pub/mirrors/gentoo/source/distfiles/
> ---> Verifying checksum(s) for pkgconfig
> Error: Checksum (sha1) mismatch for pkg-config-0.26.tar.gz
> Error: Checksum (rmd160) mismatch for pkg-config-0.26.tar.gz
> ***
> The non-matching file appears to be HTML. See this page for possible
> reasons
> for the checksum mismatch:
> <https://trac.macports.org/wiki/MisbehavingServers>
> ***
> Error: Target org.macports.checksum returned: Unable to verify file
> checksums
> Log for pkgconfig is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/pkgconfig/main.log
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
>
> This is the entire log:
>
> $ sudo port -d install pkgconfig
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Attempting ln -sf
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/pkgconfig/work
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig/work
> DEBUG: changing euid/egid - current euid: 0 - current egid: 0
> DEBUG: egid changed to: 501
> DEBUG: euid changed to: 502
> DEBUG: Starting logging for pkgconfig
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: glib2 2.28.8_0 exists in the ports tree
> DEBUG: glib2 2.28.8_0 is the latest installed
> DEBUG: glib2 2.28.8_0 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.18.1.1_2 exists in the ports tree
> DEBUG: gettext 0.18.1.1_2 is the latest installed
> DEBUG: gettext 0.18.1.1_2 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.14_0 exists in the ports tree
> DEBUG: libiconv 1.14_0 is the latest installed
> DEBUG: libiconv 1.14_0 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.9_1 exists in the ports tree
> DEBUG: ncurses 5.9_1 is the latest installed
> DEBUG: ncurses 5.9_1 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_1 exists in the ports tree
> DEBUG: expat 2.0.1_1 is the latest installed
> DEBUG: expat 2.0.1_1 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: zlib 1.2.5_0 exists in the ports tree
> DEBUG: zlib 1.2.5_0 is the latest installed
> DEBUG: zlib 1.2.5_0 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5 5.12.3_1 exists in the ports tree
> DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed
> DEBUG: perl5 5.12.3_1 +perl5_12 is active
> DEBUG: Merging existing variants '+perl5_12' into variants
> DEBUG: new fully merged portvariants: perl5_12 +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: universal_variant is false, so not adding the default universal
> variant
> DEBUG: Executing variant perl5_12 provides perl5_12
> DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5.12 5.12.3_2 exists in the ports tree
> DEBUG: perl5.12 5.12.3_2 is the latest installed
> DEBUG: perl5.12 5.12.3_2 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gdbm 1.9.1_0 exists in the ports tree
> DEBUG: gdbm 1.9.1_0 is the latest installed
> DEBUG: gdbm 1.9.1_0 is active
> DEBUG: Merging existing variants '' into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
> DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0
> ---> Computing dependencies for pkgconfig
> DEBUG: Searching for dependency: glib2
> DEBUG: Found Dependency: receipt exists for glib2
> DEBUG: Executing org.macports.main (pkgconfig)
> DEBUG: changing euid/egid - current euid: 0 - current egid: 0
> DEBUG: egid changed to: 501
> DEBUG: euid changed to: 502
> DEBUG: archivefetch phase started at Sun Sep 11 00:24:01 CEST 2011
> ---> Fetching archive for pkgconfig
> DEBUG: Executing org.macports.archivefetch (pkgconfig)
> DEBUG: euid/egid changed to: 0/0
> DEBUG: chowned /opt/local/var/macports/software/pkgconfig to macports
> DEBUG: euid/egid changed to: 502/501
> DEBUG: euid/egid changed to: 0/0
> DEBUG: chowned /opt/local/var/macports/incoming to macports
> DEBUG: euid/egid changed to: 502/501
> ---> pkgconfig-0.26_0.darwin_11.x86_64.tbz2 doesn't seem to exist in
> /opt/local/var/macports/software/pkgconfig
> ---> Attempting to fetch pkgconfig-0.26_0.darwin_11.x86_64.tbz2 from
> http://packages.macports.org/pkgconfig
> % Total % Received % Xferd Average Speed Time Time Time
> Current
> Dload Upload Total Spent Left
> Speed
> 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:--
> 0
> DEBUG: Fetching archive failed:: The requested URL returned error: 404
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: fetch phase started at Sun Sep 11 00:24:02 CEST 2011
> ---> Fetching pkgconfig
> DEBUG: Can't run fetch on this port without elevated privileges.
> Escalating privileges back to root.
> DEBUG: euid changed to: 0. egid changed to: 0.
> DEBUG: changing euid/egid - current euid: 0 - current egid: 0
> DEBUG: egid changed to: 501
> DEBUG: euid changed to: 502
> DEBUG: Executing org.macports.fetch (pkgconfig)
> ---> pkg-config-0.26.tar.gz doesn't seem to exist in
> /opt/local/var/macports/distfiles/pkgconfig
> DEBUG: Pinging pkg-config.freedesktop.org...
> DEBUG: Pinging www.vg.kernel.org...
> DEBUG: Pinging distfiles.macports.org...
> DEBUG: Pinging aarnet.au.distfiles.macports.org...
> DEBUG: Pinging her.gr.distfiles.macports.org...
> DEBUG: Pinging lil.fr.distfiles.macports.org...
> DEBUG: Pinging sea.us.distfiles.macports.org...
> DEBUG: Pinging ykf.ca.distfiles.macports.org...
> DEBUG: pkg-config.freedesktop.org ping time is 247.217
> DEBUG: www.vg.kernel.org ping time is 82.122
> DEBUG: distfiles.macports.org ping time is 239.466
> DEBUG: aarnet.au.distfiles.macports.org ping time is 388.000
> DEBUG: her.gr.distfiles.macports.org ping time is 138.807
> DEBUG: lil.fr.distfiles.macports.org ping time is 89.335
> DEBUG: sea.us.distfiles.macports.org ping time is 10000
> DEBUG: ykf.ca.distfiles.macports.org ping time is 173.056
> ---> Attempting to fetch pkg-config-0.26.tar.gz from
> http://www.vg.kernel.org/pub/mirrors/gentoo/source/distfiles/
> % Total % Received % Xferd Average Speed Time Time Time
> Current
> Dload Upload Total Spent Left
> Speed
> 0 0 0 1499 0 0 432 0 --:--:-- 0:00:03 --:--:--
> 432
> DEBUG: Privilege de-escalation not attempted as not running as root.
> DEBUG: checksum phase started at Sun Sep 11 00:24:08 CEST 2011
> ---> Verifying checksum(s) for pkgconfig
> DEBUG: Executing org.macports.checksum (pkgconfig)
> ---> Checksumming pkg-config-0.26.tar.gz
> Error: Checksum (sha1) mismatch for pkg-config-0.26.tar.gz
> Portfile checksum: pkg-config-0.26.tar.gz sha1
> fd71a70b023b9087c8a7bb76a0dc135a61059652
> Distfile checksum: pkg-config-0.26.tar.gz sha1
> e48526ac51650ed4027a54866d15d54ad644e3ae
> Error: Checksum (rmd160) mismatch for pkg-config-0.26.tar.gz
> Portfile checksum: pkg-config-0.26.tar.gz rmd160
> face3d16ec338b9b1ab41d56d6e4d1a5624b52d0
> Distfile checksum: pkg-config-0.26.tar.gz rmd160
> cc60fdc76a773e3765105359dfd77b9b3ca6dab6
> The correct checksum line may be:
> checksums sha1 e48526ac51650ed4027a54866d15d54ad644e3ae \
> rmd160 cc60fdc76a773e3765105359dfd77b9b3ca6dab6
> ***
> The non-matching file appears to be HTML. See this page for possible
> reasons
> for the checksum mismatch:
> <https://trac.macports.org/wiki/MisbehavingServers>
> ***
> Error: Target org.macports.checksum returned: Unable to verify file
> checksums
> DEBUG: Backtrace: Unable to verify file checksums
> while executing
> "$procedure $targetname"
> Warning: the following items did not execute (for pkgconfig):
> org.macports.activate org.macports.checksum org.macports.extract
> org.macports.patch org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> Log for pkgconfig is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/pkgconfig/main.log
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
New description:
I'm trying to install imagemagick on OSX 10.7
The problem on i'm blocked is on pkgconfig
{{{
sudo port checksum pkgconfig
---> Fetching pkgconfig
---> Attempting to fetch pkg-config-0.26.tar.gz from
http://www.vg.kernel.org/pub/mirrors/gentoo/source/distfiles/
---> Verifying checksum(s) for pkgconfig
Error: Checksum (sha1) mismatch for pkg-config-0.26.tar.gz
Error: Checksum (rmd160) mismatch for pkg-config-0.26.tar.gz
***
The non-matching file appears to be HTML. See this page for possible
reasons
for the checksum mismatch:
<https://trac.macports.org/wiki/MisbehavingServers>
***
Error: Target org.macports.checksum returned: Unable to verify file
checksums
Log for pkgconfig is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/pkgconfig/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
This is the entire log:
{{{
$ sudo port -d install pkgconfig
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/pkgconfig/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig/work
DEBUG: changing euid/egid - current euid: 0 - current egid: 0
DEBUG: egid changed to: 501
DEBUG: euid changed to: 502
DEBUG: Starting logging for pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glib2 2.28.8_0 exists in the ports tree
DEBUG: glib2 2.28.8_0 is the latest installed
DEBUG: glib2 2.28.8_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_2 exists in the ports tree
DEBUG: gettext 0.18.1.1_2 is the latest installed
DEBUG: gettext 0.18.1.1_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.14_0 exists in the ports tree
DEBUG: libiconv 1.14_0 is the latest installed
DEBUG: libiconv 1.14_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.9_1 exists in the ports tree
DEBUG: ncurses 5.9_1 is the latest installed
DEBUG: ncurses 5.9_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_1 exists in the ports tree
DEBUG: expat 2.0.1_1 is the latest installed
DEBUG: expat 2.0.1_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0 is the latest installed
DEBUG: zlib 1.2.5_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.12.3_1 exists in the ports tree
DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed
DEBUG: perl5 5.12.3_1 +perl5_12 is active
DEBUG: Merging existing variants '+perl5_12' into variants
DEBUG: new fully merged portvariants: perl5_12 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: Executing variant perl5_12 provides perl5_12
DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.12 5.12.3_2 exists in the ports tree
DEBUG: perl5.12 5.12.3_2 is the latest installed
DEBUG: perl5.12 5.12.3_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gdbm 1.9.1_0 exists in the ports tree
DEBUG: gdbm 1.9.1_0 is the latest installed
DEBUG: gdbm 1.9.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0
---> Computing dependencies for pkgconfig
DEBUG: Searching for dependency: glib2
DEBUG: Found Dependency: receipt exists for glib2
DEBUG: Executing org.macports.main (pkgconfig)
DEBUG: changing euid/egid - current euid: 0 - current egid: 0
DEBUG: egid changed to: 501
DEBUG: euid changed to: 502
DEBUG: archivefetch phase started at Sun Sep 11 00:24:01 CEST 2011
---> Fetching archive for pkgconfig
DEBUG: Executing org.macports.archivefetch (pkgconfig)
DEBUG: euid/egid changed to: 0/0
DEBUG: chowned /opt/local/var/macports/software/pkgconfig to macports
DEBUG: euid/egid changed to: 502/501
DEBUG: euid/egid changed to: 0/0
DEBUG: chowned /opt/local/var/macports/incoming to macports
DEBUG: euid/egid changed to: 502/501
---> pkgconfig-0.26_0.darwin_11.x86_64.tbz2 doesn't seem to exist in
/opt/local/var/macports/software/pkgconfig
---> Attempting to fetch pkgconfig-0.26_0.darwin_11.x86_64.tbz2 from
http://packages.macports.org/pkgconfig
% Total % Received % Xferd Average Speed Time Time Time
Current
Dload Upload Total Spent Left
Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:--
0
DEBUG: Fetching archive failed:: The requested URL returned error: 404
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: fetch phase started at Sun Sep 11 00:24:02 CEST 2011
---> Fetching pkgconfig
DEBUG: Can't run fetch on this port without elevated privileges.
Escalating privileges back to root.
DEBUG: euid changed to: 0. egid changed to: 0.
DEBUG: changing euid/egid - current euid: 0 - current egid: 0
DEBUG: egid changed to: 501
DEBUG: euid changed to: 502
DEBUG: Executing org.macports.fetch (pkgconfig)
---> pkg-config-0.26.tar.gz doesn't seem to exist in
/opt/local/var/macports/distfiles/pkgconfig
DEBUG: Pinging pkg-config.freedesktop.org...
DEBUG: Pinging www.vg.kernel.org...
DEBUG: Pinging distfiles.macports.org...
DEBUG: Pinging aarnet.au.distfiles.macports.org...
DEBUG: Pinging her.gr.distfiles.macports.org...
DEBUG: Pinging lil.fr.distfiles.macports.org...
DEBUG: Pinging sea.us.distfiles.macports.org...
DEBUG: Pinging ykf.ca.distfiles.macports.org...
DEBUG: pkg-config.freedesktop.org ping time is 247.217
DEBUG: www.vg.kernel.org ping time is 82.122
DEBUG: distfiles.macports.org ping time is 239.466
DEBUG: aarnet.au.distfiles.macports.org ping time is 388.000
DEBUG: her.gr.distfiles.macports.org ping time is 138.807
DEBUG: lil.fr.distfiles.macports.org ping time is 89.335
DEBUG: sea.us.distfiles.macports.org ping time is 10000
DEBUG: ykf.ca.distfiles.macports.org ping time is 173.056
---> Attempting to fetch pkg-config-0.26.tar.gz from
http://www.vg.kernel.org/pub/mirrors/gentoo/source/distfiles/
% Total % Received % Xferd Average Speed Time Time Time
Current
Dload Upload Total Spent Left
Speed
0 0 0 1499 0 0 432 0 --:--:-- 0:00:03 --:--:--
432
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: checksum phase started at Sun Sep 11 00:24:08 CEST 2011
---> Verifying checksum(s) for pkgconfig
DEBUG: Executing org.macports.checksum (pkgconfig)
---> Checksumming pkg-config-0.26.tar.gz
Error: Checksum (sha1) mismatch for pkg-config-0.26.tar.gz
Portfile checksum: pkg-config-0.26.tar.gz sha1
fd71a70b023b9087c8a7bb76a0dc135a61059652
Distfile checksum: pkg-config-0.26.tar.gz sha1
e48526ac51650ed4027a54866d15d54ad644e3ae
Error: Checksum (rmd160) mismatch for pkg-config-0.26.tar.gz
Portfile checksum: pkg-config-0.26.tar.gz rmd160
face3d16ec338b9b1ab41d56d6e4d1a5624b52d0
Distfile checksum: pkg-config-0.26.tar.gz rmd160
cc60fdc76a773e3765105359dfd77b9b3ca6dab6
The correct checksum line may be:
checksums sha1 e48526ac51650ed4027a54866d15d54ad644e3ae \
rmd160 cc60fdc76a773e3765105359dfd77b9b3ca6dab6
***
The non-matching file appears to be HTML. See this page for possible
reasons
for the checksum mismatch:
<https://trac.macports.org/wiki/MisbehavingServers>
***
Error: Target org.macports.checksum returned: Unable to verify file
checksums
DEBUG: Backtrace: Unable to verify file checksums
while executing
"$procedure $targetname"
Warning: the following items did not execute (for pkgconfig):
org.macports.activate org.macports.checksum org.macports.extract
org.macports.patch org.macports.configure org.macports.build
org.macports.destroot org.macports.install
Log for pkgconfig is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/pkgconfig/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
--
Comment:
Please use WikiFormatting and Cc the maintainer of the port.
--
Ticket URL: <https://trac.macports.org/ticket/31212#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list