[MacPorts] #31390: error installing dsiff - see log file
MacPorts
noreply at macports.org
Sat Sep 24 04:46:56 PDT 2011
#31390: error installing dsiff - see log file
------------------------------------------+---------------------------------
Reporter: jfidler@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: High | Milestone: MacPorts 2.0.4
Component: ports | Version: 2.0.3
Keywords: | Port:
------------------------------------------+---------------------------------
what do i need to do to install dsniff properly?
version:1
:msg:main ---> Computing dependencies for dsniff:info:main .:debug:main
Checking for conflicts against dsniff
:debug:main Searching for dependency: dsniff-devel
:debug:main Didn't find receipt, going to depspec regex for: dsniff-devel
:debug:main Searching for dependency: libnids
:debug:main Didn't find receipt, going to depspec regex for: libnids
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/libnids
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant libnet11 provides libnet11
:debug:main Searching for dependency: libpcap
:debug:main Didn't find receipt, going to depspec regex for: libpcap
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/libpcap
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: openssl
:debug:main Didn't find receipt, going to depspec regex for: openssl
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Searching for dependency: xorg-libXmu
:debug:main Didn't find receipt, going to depspec regex for: xorg-libXmu
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libXmu
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: libnet11
:debug:main Didn't find receipt, going to depspec regex for: libnet11
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/libnet11
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Checking for conflicts against libnet11
:debug:main Searching for dependency: libnet
:debug:main Didn't find receipt, going to depspec regex for: libnet
:debug:main Searching for dependency: autoconf
:debug:main Didn't find receipt, going to depspec regex for: autoconf
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: automake
:debug:main Didn't find receipt, going to depspec regex for: automake
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: libtool
:debug:main Didn't find receipt, going to depspec regex for: libtool
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: perl5
:debug:main Didn't find receipt, going to depspec regex for: perl5
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main Searching for dependency: m4
:debug:main Didn't find receipt, going to depspec regex for: m4
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: help2man
:debug:main Didn't find receipt, going to depspec regex for: help2man
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/help2man
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: perl5.12
:debug:main Didn't find receipt, going to depspec regex for: perl5.12
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: gdbm
:debug:main Didn't find receipt, going to depspec regex for: gdbm
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:info:main .:info:main .:info:main .:debug:main Searching for dependency:
perl5.12
:debug:main Didn't find receipt, going to depspec regex for: perl5.12
:debug:main Searching for dependency: p5.12-locale-gettext
:debug:main Didn't find receipt, going to depspec regex for: p5.12-locale-
gettext
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
-locale-gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for livecheck.version
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: gettext
:debug:main Didn't find receipt, going to depspec regex for: gettext
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Searching for dependency: libiconv
:debug:main Didn't find receipt, going to depspec regex for: libiconv
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:info:main .:info:main .:info:main .:debug:main Searching for dependency:
ncurses
:debug:main Didn't find receipt, going to depspec regex for: ncurses
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: expat
:debug:main Didn't find receipt, going to depspec regex for: expat
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: ncursesw
:debug:main Didn't find receipt, going to depspec regex for: ncursesw
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncursesw
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:info:main .:info:main .:info:main .:debug:main Searching for dependency:
gperf
:debug:main Didn't find receipt, going to depspec regex for: gperf
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gperf
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:info:main .:info:main .:debug:main Searching for dependency: autoconf
:debug:main Didn't find receipt, going to depspec regex for: autoconf
:debug:main Searching for dependency: perl5
:debug:main Didn't find receipt, going to depspec regex for: perl5
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:info:main .:info:main .:info:main .:info:main .:info:main .:debug:main
Searching for dependency: zlib
:debug:main Didn't find receipt, going to depspec regex for: zlib
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:info:main .:debug:main Searching for dependency: pkgconfig
:debug:main Didn't find receipt, going to depspec regex for: pkgconfig
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xorg-libXext
:debug:main Didn't find receipt, going to depspec regex for: xorg-libXext
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libXext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xorg-libXt
:debug:main Didn't find receipt, going to depspec regex for: xorg-libXt
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libXt
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: glib2
:debug:main Didn't find receipt, going to depspec regex for: glib2
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Checking for conflicts against glib2
:debug:main Searching for dependency: glib2-devel
:debug:main Didn't find receipt, going to depspec regex for: glib2-devel
:debug:main Searching for dependency: perl5
:debug:main Didn't find receipt, going to depspec regex for: perl5
:info:main .:info:main .:debug:main Searching for dependency: xorg-util-
macros
:debug:main Didn't find receipt, going to depspec regex for: xorg-util-
macros
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-util-macros
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-libX11
:debug:main Didn't find receipt, going to depspec regex for: xorg-libX11
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libX11
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xorg-xextproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-
xextproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-xextproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:info:main .:info:main .:debug:main Searching for dependency: xorg-xtrans
:debug:main Didn't find receipt, going to depspec regex for: xorg-xtrans
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-xtrans
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-bigreqsproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-
bigreqsproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-bigreqsproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-xcmiscproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-
xcmiscproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-xcmiscproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-xf86bigfontproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-
xf86bigfontproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-xf86bigfontproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-inputproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-
inputproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-inputproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-libXdmcp
:debug:main Didn't find receipt, going to depspec regex for: xorg-libXdmcp
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libXdmcp
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xorg-libXau
:debug:main Didn't find receipt, going to depspec regex for: xorg-libXau
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libXau
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xorg-libxcb
:debug:main Didn't find receipt, going to depspec regex for: xorg-libxcb
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libxcb
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant python27 provides python27
:debug:main Searching for dependency: xorg-xproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-xproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-xproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-kbproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-kbproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-kbproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:info:main .:info:main .:info:main .:info:main .:info:main .:info:main
.:info:main .:info:main .:debug:main Searching for dependency: xorg-xcb-
proto
:debug:main Didn't find receipt, going to depspec regex for: xorg-xcb-
proto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-xcb-proto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Executing variant python27 provides python27
:debug:main Searching for dependency: xorg-libpthread-stubs
:debug:main Didn't find receipt, going to depspec regex for: xorg-
libpthread-stubs
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libpthread-stubs
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: python27
:debug:main Didn't find receipt, going to depspec regex for: python27
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:info:main .:debug:main Searching for dependency: libxml2
:debug:main Didn't find receipt, going to depspec regex for: libxml2
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: python27
:debug:main Didn't find receipt, going to depspec regex for: python27
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:info:main .:info:main .:debug:main Searching for dependency: sqlite3
:debug:main Didn't find receipt, going to depspec regex for: sqlite3
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: db46
:debug:main Didn't find receipt, going to depspec regex for: db46
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant java provides java
:debug:main Searching for dependency: bzip2
:debug:main Didn't find receipt, going to depspec regex for: bzip2
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Searching for dependency: readline
:debug:main Didn't find receipt, going to depspec regex for: readline
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Searching for dependency: python_select
:debug:main Didn't find receipt, going to depspec regex for: python_select
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main universal_variant is false, so not adding the default
universal variant
:info:main .:info:main .:info:main .:info:main .:info:main .:info:main
.:info:main .:info:main .:info:main .:info:main .:info:main .:debug:main
Searching for dependency: xorg-libsm
:debug:main Didn't find receipt, going to depspec regex for: xorg-libsm
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libsm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: xorg-libice
:debug:main Didn't find receipt, going to depspec regex for: xorg-libice
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libice
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:msg:main
:msg:main ---> Dependencies to be installed: libnids libnet11 autoconf
help2man gettext expat libiconv gperf ncurses ncursesw p5.12-locale-
gettext perl5.12 gdbm m4 perl5 perl5 automake libtool libpcap openssl zlib
xorg-libXmu pkgconfig glib2 xorg-libXext xorg-libX11 xorg-bigreqsproto
xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-
libxcb python27 bzip2 db46 python_select readline sqlite3 python27 xorg-
libpthread-stubs xorg-xcb-proto libxml2 xorg-util-macros xorg-xcmiscproto
xorg-xextproto xorg-xf86bigfontproto xorg-xtrans xorg-libXt xorg-libsm
xorg-libice
:debug:main Starting logging for expat
:debug:clean Starting logging for gperf
:debug:clean Starting logging for libiconv
:debug:clean Starting logging for ncursesw
:debug:clean Starting logging for ncurses
:debug:clean Starting logging for gettext
:debug:clean Starting logging for gdbm
:debug:clean Starting logging for perl5.12
:debug:clean Starting logging for p5.12-locale-gettext
:debug:clean Starting logging for help2man
:debug:clean Starting logging for m4
:debug:clean Starting logging for perl5
:debug:clean Starting logging for autoconf
:debug:clean Starting logging for perl5
:debug:clean Starting logging for automake
:debug:clean Starting logging for libtool
:debug:clean Starting logging for libnet11
:debug:clean Starting logging for libpcap
:debug:clean Starting logging for libnids
:debug:clean Starting logging for zlib
:debug:clean Starting logging for openssl
:debug:clean Starting logging for glib2
:debug:clean Starting logging for pkgconfig
:debug:clean Starting logging for xorg-bigreqsproto
:debug:clean Starting logging for xorg-inputproto
:debug:clean Starting logging for xorg-kbproto
:debug:clean Starting logging for xorg-xproto
:debug:clean Starting logging for xorg-libXau
:debug:clean Starting logging for xorg-libXdmcp
:debug:clean Starting logging for bzip2
:debug:clean Starting logging for db46
:debug:clean Starting logging for python_select
:debug:clean Starting logging for readline
:debug:clean Starting logging for sqlite3
:debug:clean Starting logging for python27
:debug:clean Starting logging for python27
:debug:clean Starting logging for xorg-libpthread-stubs
:debug:clean Starting logging for libxml2
:debug:clean Starting logging for xorg-xcb-proto
:debug:clean Starting logging for xorg-libxcb
:debug:clean Starting logging for xorg-util-macros
:debug:clean Starting logging for xorg-xcmiscproto
:debug:clean Starting logging for xorg-xextproto
:debug:clean Starting logging for xorg-xf86bigfontproto
:debug:clean Starting logging for xorg-xtrans
:debug:clean Starting logging for xorg-libX11
:debug:clean Starting logging for xorg-libXext
:debug:clean Starting logging for xorg-libice
:debug:clean Starting logging for xorg-libsm
:debug:clean Starting logging for xorg-libXt
:debug:clean Starting logging for xorg-libXmu
:debug:main Executing org.macports.main (dsniff)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 504
:debug:archivefetch archivefetch phase started at Fri Sep 23 15:44:11 EDT
2011
:msg:archivefetch ---> Fetching archive for dsniff
:debug:archivefetch Executing org.macports.archivefetch (dsniff)
:debug:archivefetch Can't run archivefetch on this port without elevated
privileges. Escalating privileges back to root.
:debug:archivefetch euid changed to: 0. egid changed to: 0.
:debug:archivefetch changing euid/egid - current euid: 0 - current egid: 0
:debug:archivefetch egid changed to: 501
:debug:archivefetch euid changed to: 504
:info:archivefetch ---> dsniff-2.3_5.darwin_10.x86_64.tbz2 doesn't seem
to exist in /opt/local/var/macports/software/dsniff
:msg:archivefetch ---> Attempting to fetch
dsniff-2.3_5.darwin_10.x86_64.tbz2 from
http://packages.macports.org/dsniff
:debug:archivefetch Fetching archive failed:: The requested URL returned
error: 404
:debug:archivefetch Privilege de-escalation not attempted as not running
as root.
:debug:fetch fetch phase started at Fri Sep 23 15:44:11 EDT 2011
:notice:fetch ---> Fetching dsniff
:debug:fetch Can't run fetch on this port without elevated privileges.
Escalating privileges back to root.
:debug:fetch euid changed to: 0. egid changed to: 0.
:debug:fetch changing euid/egid - current euid: 0 - current egid: 0
:debug:fetch egid changed to: 501
:debug:fetch euid changed to: 504
:debug:fetch Executing org.macports.fetch (dsniff)
:info:fetch ---> dsniff-2.3.tar.gz doesn't seem to exist in
/opt/local/var/macports/distfiles/dsniff
:debug:fetch Pinging monkey.org...
:debug:fetch Pinging distfiles.macports.org...
:debug:fetch Pinging aarnet.au.distfiles.macports.org...
:debug:fetch Pinging her.gr.distfiles.macports.org...
:debug:fetch Pinging lil.fr.distfiles.macports.org...
:debug:fetch Pinging sea.us.distfiles.macports.org...
:debug:fetch Pinging ykf.ca.distfiles.macports.org...
:debug:fetch monkey.org ping time is 34.293
:debug:fetch distfiles.macports.org ping time is 87.367
:debug:fetch aarnet.au.distfiles.macports.org ping time is 266.928
:debug:fetch her.gr.distfiles.macports.org ping time is 173.648
:debug:fetch lil.fr.distfiles.macports.org ping time is 99.914
:debug:fetch sea.us.distfiles.macports.org ping time is 10000
:debug:fetch ykf.ca.distfiles.macports.org ping time is 37.557
:notice:fetch ---> Attempting to fetch dsniff-2.3.tar.gz from
http://monkey.org/~dugsong/dsniff/
:debug:fetch Privilege de-escalation not attempted as not running as root.
:debug:checksum checksum phase started at Fri Sep 23 15:44:15 EDT 2011
:notice:checksum ---> Verifying checksum(s) for dsniff
:debug:checksum Executing org.macports.checksum (dsniff)
:info:checksum ---> Checksumming dsniff-2.3.tar.gz
:debug:checksum Correct (md5) checksum for dsniff-2.3.tar.gz
:debug:checksum Privilege de-escalation not attempted as not running as
root.
:debug:extract extract phase started at Fri Sep 23 15:44:15 EDT 2011
:notice:extract ---> Extracting dsniff
:debug:extract Executing org.macports.extract (dsniff)
:info:extract ---> Extracting dsniff-2.3.tar.gz
:debug:extract setting option extract.args to
'/opt/local/var/macports/distfiles/dsniff/dsniff-2.3.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:extract Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work"
&& /usr/bin/gzip -dc
'/opt/local/var/macports/distfiles/dsniff/dsniff-2.3.tar.gz' |
/usr/bin/gnutar --no-same-owner -xf -'
:debug:extract Executing command line: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work"
&& /usr/bin/gzip -dc
'/opt/local/var/macports/distfiles/dsniff/dsniff-2.3.tar.gz' |
/usr/bin/gnutar --no-same-owner -xf -
:debug:extract euid/egid changed to: 0/0
:debug:extract chowned
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work
to macports
:debug:extract euid/egid changed to: 504/501
:debug:extract Privilege de-escalation not attempted as not running as
root.
:debug:patch patch phase started at Fri Sep 23 15:44:15 EDT 2011
:debug:patch Executing org.macports.patch (dsniff)
:notice:patch ---> Applying patches to dsniff
:info:patch ---> Applying
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/dsniff/files
/patch-pcaputil.c
:debug:patch Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3"
&& /usr/bin/patch -p0'
:debug:patch Executing command line: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3"
&& /usr/bin/patch -p0 <
'/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/dsniff/files
/patch-pcaputil.c'
:info:patch patching file pcaputil.c
:info:patch ---> Applying
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/dsniff/files
/patch-sshcrypto.c
:debug:patch Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3"
&& /usr/bin/patch -p0'
:debug:patch Executing command line: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3"
&& /usr/bin/patch -p0 <
'/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/dsniff/files
/patch-sshcrypto.c'
:info:patch patching file sshcrypto.c
:debug:patch Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Fri Sep 23 15:44:15 EDT 2011
:notice:configure ---> Configuring dsniff
:debug:configure Using compiler 'Mac OS X gcc 4.2'
:debug:configure Executing org.macports.configure (dsniff)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2
-DBIND_8_COMPAT -arch x86_64' CPPFLAGS='-I/opt/local/include'
CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib'
MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS'
F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64'
OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install
-c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64'
CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
:debug:configure Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3"
&& ./configure --prefix=/opt/local --mandir=/opt/local/share/man'
:debug:configure Executing command line: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3"
&& ./configure --prefix=/opt/local --mandir=/opt/local/share/man
:info:configure creating cache ./config.cache
:info:configure checking for gcc... /usr/bin/gcc-4.2
:info:configure checking whether the C compiler (/usr/bin/gcc-4.2 -pipe
-O2 -DBIND_8_COMPAT -arch x86_64 -L/opt/local/lib -arch x86_64) works...
yes
:info:configure checking whether the C compiler (/usr/bin/gcc-4.2 -pipe
-O2 -DBIND_8_COMPAT -arch x86_64 -L/opt/local/lib -arch x86_64) is a
cross-compiler... no
:info:configure checking whether we are using GNU C... yes
:info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
:info:configure checking for a BSD compatible install... /usr/bin/install
-c
:info:configure checking for ranlib... ranlib
:info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2
-E
:info:configure checking for X... libraries , headers
:info:configure checking for dnet_ntoa in -ldnet... no
:info:configure checking for dnet_ntoa in -ldnet_stub... no
:info:configure checking for gethostbyname... yes
:info:configure checking for connect... yes
:info:configure checking for remove... yes
:info:configure checking for shmat... yes
:info:configure checking for IceConnectionNumber in -lICE... yes
:info:configure checking for ANSI C header files... yes
:info:configure checking for err.h... yes
:info:configure checking for fcntl.h... yes
:info:configure checking for sys/ioctl.h... yes
:info:configure checking for sys/queue.h... yes
:info:configure checking for unistd.h... yes
:info:configure checking for libgen.h... yes
:info:configure checking for net/if_tun.h... no
:info:configure checking for MIN and MAX in sys/param.h... yes
:info:configure checking for working const... yes
:info:configure checking for size_t... yes
:info:configure checking whether struct tm is in sys/time.h or time.h...
time.h
:info:configure checking for u_int32_t... yes
:info:configure checking for u_int64_t... yes
:info:configure checking for in_addr_t... yes
:info:configure checking whether /usr/bin/gcc-4.2 needs -traditional... no
:info:configure checking for 8-bit clean memcmp... yes
:info:configure checking return type of signal handlers... void
:info:configure checking for strftime... yes
:info:configure checking for gethostname... yes
:info:configure checking for socket... yes
:info:configure checking for strdup... yes
:info:configure checking for strstr... yes
:info:configure checking for xdr_fhstatus in -lrpcsvc... no
:info:configure checking for socket in -lsocket... no
:info:configure checking for gethostbyname in -lnsl... no
:info:configure checking for dn_expand in -lresolv... yes
:info:configure checking for dirname... yes
:info:configure checking for strlcpy... yes
:info:configure checking for strlcat... yes
:info:configure checking for strsep... yes
:info:configure checking for MD5Update... no
:info:configure checking for warnx... yes
:info:configure checking for ether_ntoa... yes
:info:configure checking for Berkeley DB with 1.85 compatibility... yes
:info:configure checking for libpcap... yes
:info:configure checking for libnet... yes
:info:configure checking for libnids... yes
:info:configure checking whether libnids version is good... yes
:info:configure checking for OpenSSL... yes
:info:configure updating cache ./config.cache
:info:configure creating ./config.status
:info:configure creating Makefile
:info:configure creating config.h
:debug:configure Privilege de-escalation not attempted as not running as
root.
:debug:build build phase started at Fri Sep 23 15:44:20 EDT 2011
:notice:build ---> Building dsniff
:debug:build Executing org.macports.build (dsniff)
:debug:build Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:build Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3"
&& /usr/bin/make -j4 -w all'
:debug:build Executing command line: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3"
&& /usr/bin/make -j4 -w all
:info:build make: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3'
:info:build /usr/bin/gcc-4.2 -pipe -O2 -DBIND_8_COMPAT -arch x86_64
-D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS
-DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I.
-I/opt/local/include -I/opt/local/include -I/opt/local/include
-I/opt/local/include -I./missing -c ./missing/dummy.c
:info:build /usr/bin/gcc-4.2 -pipe -O2 -DBIND_8_COMPAT -arch x86_64
-D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS
-DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I.
-I/opt/local/include -I/opt/local/include -I/opt/local/include
-I/opt/local/include -I./missing -c ./missing/md5.c
:info:build /usr/bin/gcc-4.2 -pipe -O2 -DBIND_8_COMPAT -arch x86_64
-D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS
-DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I.
-I/opt/local/include -I/opt/local/include -I/opt/local/include
-I/opt/local/include -I./missing -c ./arpspoof.c
:info:build /usr/bin/gcc-4.2 -pipe -O2 -DBIND_8_COMPAT -arch x86_64
-D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS
-DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I.
-I/opt/local/include -I/opt/local/include -I/opt/local/include
-I/opt/local/include -I./missing -c ./arp.c
:info:build /usr/bin/gcc-4.2 -pipe -O2 -DBIND_8_COMPAT -arch x86_64
-D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS
-DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I.
-I/opt/local/include -I/opt/local/include -I/opt/local/include
-I/opt/local/include -I./missing -c ./dnsspoof.c
:info:build ./arpspoof.c:25: warning: ‘struct ether_addr’ declared inside
parameter list
:info:build ./arpspoof.c:25: warning: its scope is only this definition or
declaration, which is probably not what you want
:info:build ./arpspoof.c:26: warning: ‘struct ether_addr’ declared inside
parameter list
:info:build ./arpspoof.c: In function ‘arp_send’:
:info:build ./arpspoof.c:49: warning: passing argument 1 of
‘libnet_get_hwaddr’ from incompatible pointer type
:info:build ./arpspoof.c:49: error: too many arguments to function
‘libnet_get_hwaddr’
:info:build ./arpspoof.c:60: warning: passing argument 6 of
‘libnet_build_ethernet’ from incompatible pointer type
:info:build ./arpspoof.c:60: error: too few arguments to function
‘libnet_build_ethernet’
:info:build ./arpspoof.c:64: error: ‘ETH_H’ undeclared (first use in this
function)
:info:build ./arpspoof.c:64: error: (Each undeclared identifier is
reported only once
:info:build ./arpspoof.c:64: error: for each function it appears in.)
:info:build ./arpspoof.c:64: error: too few arguments to function
‘libnet_build_arp’
:info:build ./arpspoof.c:67: warning: passing argument 1 of ‘ether_ntoa’
from incompatible pointer type
:info:build ./arpspoof.c:71: warning: passing argument 1 of ‘ether_ntoa’
from incompatible pointer type
:info:build ./arpspoof.c:73: warning: format ‘%s’ expects type ‘char *’,
but argument 4 has type ‘int’
:info:build ./arpspoof.c:73: warning: format ‘%s’ expects type ‘char *’,
but argument 5 has type ‘int’
:info:build ./arpspoof.c:77: warning: passing argument 1 of ‘ether_ntoa’
from incompatible pointer type
:info:build ./arpspoof.c:78: warning: format ‘%s’ expects type ‘char *’,
but argument 4 has type ‘int’
:info:build ./arpspoof.c:80: warning: passing argument 1 of ‘ether_ntoa’
from incompatible pointer type
:info:build ./arpspoof.c: In function ‘arp_find’:
:info:build ./arpspoof.c:114: warning: passing argument 2 of
‘arp_cache_lookup’ from incompatible pointer type
:info:build ./arpspoof.c: In function ‘main’:
:info:build ./arpspoof.c:181: warning: assignment makes pointer from
integer without a cast
:info:build make: *** [arpspoof.o] Error 1
:info:build make: *** Waiting for unfinished jobs....
:info:build ./dnsspoof.c: In function ‘dns_init’:
:info:build ./dnsspoof.c:95: warning: assignment makes pointer from
integer without a cast
:info:build ./dnsspoof.c: In function ‘dns_spoof’:
:info:build ./dnsspoof.c:191: error: dereferencing pointer to incomplete
type
:info:build ./dnsspoof.c:213: error: ‘IP_H’ undeclared (first use in this
function)
:info:build ./dnsspoof.c:213: error: (Each undeclared identifier is
reported only once
:info:build ./dnsspoof.c:213: error: for each function it appears in.)
:info:build ./dnsspoof.c:213: error: ‘UDP_H’ undeclared (first use in this
function)
:info:build ./dnsspoof.c:236: error: ‘PRu16’ undeclared (first use in this
function)
:info:build ./dnsspoof.c:237: error: dereferencing pointer to incomplete
type
:info:build ./dnsspoof.c:238: error: dereferencing pointer to incomplete
type
:info:build ./dnsspoof.c:241: warning: passing argument 3 of
‘libnet_build_udp’ makes integer from pointer without a cast
:info:build ./dnsspoof.c:241: error: too few arguments to function
‘libnet_build_udp’
:info:build ./dnsspoof.c:252: warning: passing argument 1 of
‘libnet_do_checksum’ from incompatible pointer type
:info:build ./dnsspoof.c:252: warning: passing argument 2 of
‘libnet_do_checksum’ makes pointer from integer without a cast
:info:build ./dnsspoof.c:252: error: too few arguments to function
‘libnet_do_checksum’
:info:build ./dnsspoof.c:258: error: dereferencing pointer to incomplete
type
:info:build ./dnsspoof.c:259: error: dereferencing pointer to incomplete
type
:info:build ./dnsspoof.c:260: warning: format ‘%s’ expects type ‘char *’,
but argument 3 has type ‘int’
:info:build ./dnsspoof.c:260: warning: format ‘%s’ expects type ‘char *’,
but argument 5 has type ‘int’
:info:build ./dnsspoof.c: In function ‘main’:
:info:build ./dnsspoof.c:304: warning: format ‘%s’ expects type ‘char *’,
but argument 6 has type ‘int’
:info:build ./dnsspoof.c:316: error: too few arguments to function
‘libnet_seed_prand’
:info:build make: *** [dnsspoof.o] Error 1
:info:build ./arp.c: In function ‘arp_cache_lookup’:
:info:build ./arp.c:74: warning: incompatible implicit declaration of
built-in function ‘memcpy’
:info:build make: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3'
:info:build shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3"
&& /usr/bin/make -j4 -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see
log for details)
:debug:build Backtrace: shell command failed (see log for details)
while executing
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for dsniff):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
:notice:build Log for dsniff is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/main.log
--
Ticket URL: <https://trac.macports.org/ticket/31390>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list