[MacPorts] #31395: libtorrent-rasterbar installation failure - wrong boost?
MacPorts
noreply at macports.org
Sun Sep 25 11:58:12 PDT 2011
#31395: libtorrent-rasterbar installation failure - wrong boost?
-------------------------------------+--------------------------------------
Reporter: brentshifley@… | Owner: macports-tickets@…
Type: defect | Status: closed
Priority: Normal | Milestone:
Component: ports | Version: 2.0.3
Resolution: worksforme | Keywords:
Port: libtorrent-rasterbar |
-------------------------------------+--------------------------------------
Changes (by macsforever2000@…):
* status: new => closed
* resolution: => worksforme
* port: => libtorrent-rasterbar
Old description:
> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main pkgconfig 0.26_0 exists in the ports tree
> :debug:main pkgconfig 0.26_0 is the latest installed
> :debug:main pkgconfig 0.26_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main glib2 2.28.8_0 exists in the ports tree
> :debug:main glib2 2.28.8_0 is the latest installed
> :debug:main glib2 2.28.8_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2 is the latest installed
> :debug:main gettext 0.18.1.1_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.14_0 exists in the ports tree
> :debug:main libiconv 1.14_0 is the latest installed
> :debug:main libiconv 1.14_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.9_1 exists in the ports tree
> :debug:main ncurses 5.9_1 is the latest installed
> :debug:main ncurses 5.9_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.0.1_1 exists in the ports tree
> :debug:main expat 2.0.1_1 is the latest installed
> :debug:main expat 2.0.1_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.5_0 exists in the ports tree
> :debug:main zlib 1.2.5_0 is the latest installed
> :debug:main zlib 1.2.5_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5 5.12.3_1 exists in the ports tree
> :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
> :debug:main perl5 5.12.3_1 +perl5_12 is active
> :debug:main Merging existing variants '+perl5_12' into variants
> :debug:main new fully merged portvariants: perl5_12 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Executing variant perl5_12 provides perl5_12
> :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5.12 5.12.3_2 exists in the ports tree
> :debug:main perl5.12 5.12.3_2 is the latest installed
> :debug:main perl5.12 5.12.3_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gdbm 1.9.1_0 exists in the ports tree
> :debug:main gdbm 1.9.1_0 is the latest installed
> :debug:main gdbm 1.9.1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python26 2.6.7_1 exists in the ports tree
> :debug:main python26 2.6.7_1 is the latest installed
> :debug:main python26 2.6.7_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python26
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! python26 2.6.7_1 >= python26 2.6.7_1
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main openssl 1.0.0e_1 exists in the ports tree
> :debug:main openssl 1.0.0e_1 is the latest installed
> :debug:main openssl 1.0.0e_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main sqlite3 3.7.8_0 exists in the ports tree
> :debug:main sqlite3 3.7.8_0 is the latest installed
> :debug:main sqlite3 3.7.8_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! sqlite3 3.7.8_0 >= sqlite3 3.7.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main readline 6.2.000_0 exists in the ports tree
> :debug:main readline 6.2.000_0 is the latest installed
> :debug:main readline 6.2.000_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main db46 4.6.21_6 exists in the ports tree
> :debug:main db46 4.6.21_6 +java is the latest installed
> :debug:main db46 4.6.21_6 +java is active
> :debug:main Merging existing variants '+java' into variants
> :debug:main new fully merged portvariants: java +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant java provides java
> :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main bzip2 1.0.6_0 exists in the ports tree
> :debug:main bzip2 1.0.6_0 is the latest installed
> :debug:main bzip2 1.0.6_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python_select 0.3_1 exists in the ports tree
> :debug:main python_select 0.3_1 is the latest installed
> :debug:main python_select 0.3_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! python_select 0.3_1 >= python_select
> 0.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libgeoip 1.4.7_0 exists in the ports tree
> :debug:main libgeoip 1.4.7_0 is the latest installed
> :debug:main libgeoip 1.4.7_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgeoip
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libgeoip 1.4.7_0 >= libgeoip 1.4.7_0
> :msg:main ---> Computing dependencies for libtorrent-rasterbar:info:main
> .:debug:main Checking for conflicts against libtorrent-rasterbar
> :debug:main Searching for dependency: libtorrent-rasterbar-devel
> :debug:main Didn't find receipt, going to depspec regex for: libtorrent-
> rasterbar-devel
> :debug:main Searching for dependency: pkgconfig
> :debug:main Found Dependency: receipt exists for pkgconfig
> :debug:main Searching for dependency: python26
> :debug:main Found Dependency: receipt exists for python26
> :debug:main Searching for dependency: libgeoip
> :debug:main Found Dependency: receipt exists for libgeoip
> :debug:main Searching for dependency: openssl
> :debug:main Found Dependency: receipt exists for openssl
> :msg:main
> :debug:main Executing org.macports.main (libtorrent-rasterbar)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 501
> :debug:main euid changed to: 502
> :debug:main Skipping completed org.macports.archivefetch (libtorrent-
> rasterbar)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.fetch (libtorrent-rasterbar)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.checksum (libtorrent-
> rasterbar)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.extract (libtorrent-
> rasterbar)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.patch (libtorrent-rasterbar)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:configure configure phase started at Sun Sep 25 06:58:48 CDT 2011
> :notice:configure ---> Configuring libtorrent-rasterbar
> :debug:configure Using compiler 'Mac OS X gcc 4.2'
> :debug:configure Executing proc-pre-org.macports.configure-configure-0
> :error:configure
> ****
> **** libtorrent-rasterbar requires port boost installed with variant
> +python26.
> **** Please do the following then try installing libtorrent-rasterbar
> again:
> ****
> **** sudo port install boost +python26
> ****
>
> :error:configure Target org.macports.configure returned: incompatible
> boost installation
> :debug:configure Backtrace: incompatible boost installation
> while executing
> "$pre $targetname"
> :info:configure Warning: the following items did not execute (for
> libtorrent-rasterbar): org.macports.activate org.macports.configure
> org.macports.build org.macports.destroot org.macports.install
> :notice:configure Log for libtorrent-rasterbar is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_net_libtorrent-rasterbar/libtorrent-
> rasterbar/main.log
New description:
{{{
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main pkgconfig 0.26_0 exists in the ports tree
:debug:main pkgconfig 0.26_0 is the latest installed
:debug:main pkgconfig 0.26_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main glib2 2.28.8_0 exists in the ports tree
:debug:main glib2 2.28.8_0 is the latest installed
:debug:main glib2 2.28.8_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 is the latest installed
:debug:main gettext 0.18.1.1_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0 is the latest installed
:debug:main libiconv 1.14_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1 is the latest installed
:debug:main ncurses 5.9_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 is the latest installed
:debug:main expat 2.0.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0 is the latest installed
:debug:main zlib 1.2.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.3_1 exists in the ports tree
:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
:debug:main perl5 5.12.3_1 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: perl5_12 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.3_2 exists in the ports tree
:debug:main perl5.12 5.12.3_2 is the latest installed
:debug:main perl5.12 5.12.3_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.9.1_0 exists in the ports tree
:debug:main gdbm 1.9.1_0 is the latest installed
:debug:main gdbm 1.9.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python26 2.6.7_1 exists in the ports tree
:debug:main python26 2.6.7_1 is the latest installed
:debug:main python26 2.6.7_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python26
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! python26 2.6.7_1 >= python26 2.6.7_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0e_1 exists in the ports tree
:debug:main openssl 1.0.0e_1 is the latest installed
:debug:main openssl 1.0.0e_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.8_0 exists in the ports tree
:debug:main sqlite3 3.7.8_0 is the latest installed
:debug:main sqlite3 3.7.8_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! sqlite3 3.7.8_0 >= sqlite3 3.7.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0 is the latest installed
:debug:main readline 6.2.000_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6 +java is the latest installed
:debug:main db46 4.6.21_6 +java is active
:debug:main Merging existing variants '+java' into variants
:debug:main new fully merged portvariants: java +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant java provides java
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0 is the latest installed
:debug:main bzip2 1.0.6_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python_select 0.3_1 exists in the ports tree
:debug:main python_select 0.3_1 is the latest installed
:debug:main python_select 0.3_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libgeoip 1.4.7_0 exists in the ports tree
:debug:main libgeoip 1.4.7_0 is the latest installed
:debug:main libgeoip 1.4.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgeoip
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libgeoip 1.4.7_0 >= libgeoip 1.4.7_0
:msg:main ---> Computing dependencies for libtorrent-rasterbar:info:main
.:debug:main Checking for conflicts against libtorrent-rasterbar
:debug:main Searching for dependency: libtorrent-rasterbar-devel
:debug:main Didn't find receipt, going to depspec regex for: libtorrent-
rasterbar-devel
:debug:main Searching for dependency: pkgconfig
:debug:main Found Dependency: receipt exists for pkgconfig
:debug:main Searching for dependency: python26
:debug:main Found Dependency: receipt exists for python26
:debug:main Searching for dependency: libgeoip
:debug:main Found Dependency: receipt exists for libgeoip
:debug:main Searching for dependency: openssl
:debug:main Found Dependency: receipt exists for openssl
:msg:main
:debug:main Executing org.macports.main (libtorrent-rasterbar)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 502
:debug:main Skipping completed org.macports.archivefetch (libtorrent-
rasterbar)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.fetch (libtorrent-rasterbar)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.checksum (libtorrent-
rasterbar)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.extract (libtorrent-rasterbar)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.patch (libtorrent-rasterbar)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Sun Sep 25 06:58:48 CDT 2011
:notice:configure ---> Configuring libtorrent-rasterbar
:debug:configure Using compiler 'Mac OS X gcc 4.2'
:debug:configure Executing proc-pre-org.macports.configure-configure-0
:error:configure
****
**** libtorrent-rasterbar requires port boost installed with variant
+python26.
**** Please do the following then try installing libtorrent-rasterbar
again:
****
**** sudo port install boost +python26
****
:error:configure Target org.macports.configure returned: incompatible
boost installation
:debug:configure Backtrace: incompatible boost installation
while executing
"$pre $targetname"
:info:configure Warning: the following items did not execute (for
libtorrent-rasterbar): org.macports.activate org.macports.configure
org.macports.build org.macports.destroot org.macports.install
:notice:configure Log for libtorrent-rasterbar is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
.org_release_tarballs_ports_net_libtorrent-rasterbar/libtorrent-
rasterbar/main.log
}}}
--
Comment:
You need to do what the message says. Namely:
{{{
sudo port install boost +python26
}}}
--
Ticket URL: <https://trac.macports.org/ticket/31395#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list