[MacPorts] #31462: Samba3 Undefined symbols for architecture x86_64

[MacPorts]

#31462: Samba3 Undefined symbols for architecture x86_64
-----------------------------------------+----------------------------------
 Reporter:  the.ben.stevenson@…          |       Owner:  mww@…           
     Type:  defect                       |      Status:  new             
 Priority:  Normal                       |   Milestone:                  
Component:  ports                        |     Version:  2.0.3           
 Keywords:  lion                         |        Port:  samba3          
-----------------------------------------+----------------------------------
Changes (by ryandesign@…):

  * owner:  macports-tickets@… => mww@…
  * keywords:  osx lion, samba3, arch flag => lion


Old description:

> Everything goes fine, but then the compilation fails because of the arch
> flags.
>

> :info:build make: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source'
> :info:build Using FLAGS      =  -O2 -fno-common -arch x86_64 -O
> -D_SAMBA_BUILD_=3 -fno-common
> -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source/iniparser/src
> -Iinclude -I./include  -I. -I. -I./lib/replace -I./lib/talloc
> -I./lib/tdb/include -I./libaddns -I./librpc -DHAVE_CONFIG_H
> -I/opt/local/include -DHAVE_STRUCT_TIMESPEC -Iinclude -I./include -I. -I.
> -I./lib/replace -I./lib/talloc -I./lib/tdb/include -I./libaddns
> -I./librpc -I./popt -DLDAP_DEPRECATED   -I/include
> -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source/lib
> -D_SAMBA_BUILD_=3
> :info:build       PICFLAG    = -fPIE
> :info:build       LIBS       = -lresolv -liconv
> :info:build       LDFLAGS    = -dynamic -Wl,-search_paths_first -lkrb5
> -L/opt/local/lib -arch x86_64 -L./bin
> :info:build       DYNEXP     =
> :info:build       LDSHFLAGS  = -dynamiclib -flat_namespace -undefined
> suppress  -dynamic -Wl,-search_paths_first -lkrb5 -L/opt/local/lib -arch
> x86_64 -L./bin
> :info:build       SHLIBEXT   = dylib
> :info:build       SONAMEFLAG = #
> :info:build Linking bin/nmbd
> :info:build Undefined symbols for architecture x86_64:
> :info:build   "_error_message", referenced from:
> :info:build       _cli_session_setup_spnego in cliconnect.o
> :info:build       _handle_krberror_packet in clikrb5.o
> :info:build       _smb_krb5_verify_checksum in clikrb5.o
> :info:build       _create_kerberos_key_from_string_direct in clikrb5.o
> :info:build       _krb5_rd_req_return_keyblock_from_keytab in clikrb5.o
> :info:build       _smb_krb5_renew_ticket in clikrb5.o
> :info:build       _cli_krb5_get_ticket in clikrb5.o
> :info:build       ...
> :info:build ld: symbol(s) not found for architecture x86_64
> :info:build collect2: ld returned 1 exit status
> :info:build make: *** [bin/nmbd] Error 1
> :info:build make: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source'
> :info:build shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source"
> && /usr/bin/make -w all " returned error 2
> :error:build Target org.macports.build returned: shell command failed
> (see log for details)
> :debug:build Backtrace: shell command failed (see log for details)
>     while executing
> "command_exec build"
>     (procedure "portbuild::build_main" line 8)
>     invoked from within
> "$procedure $targetname"
> :info:build Warning: the following items did not execute (for samba3):
> org.macports.activate org.macports.build org.macports.destroot
> org.macports.install
> :notice:build Log for samba3 is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/main.log

New description:

 Everything goes fine, but then the compilation fails because of the arch
 flags.

 {{{
 :info:build make: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source'
 :info:build Using FLAGS      =  -O2 -fno-common -arch x86_64 -O
 -D_SAMBA_BUILD_=3 -fno-common
 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source/iniparser/src
 -Iinclude -I./include  -I. -I. -I./lib/replace -I./lib/talloc
 -I./lib/tdb/include -I./libaddns -I./librpc -DHAVE_CONFIG_H
 -I/opt/local/include -DHAVE_STRUCT_TIMESPEC -Iinclude -I./include -I. -I.
 -I./lib/replace -I./lib/talloc -I./lib/tdb/include -I./libaddns -I./librpc
 -I./popt -DLDAP_DEPRECATED   -I/include
 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source/lib
 -D_SAMBA_BUILD_=3
 :info:build       PICFLAG    = -fPIE
 :info:build       LIBS       = -lresolv -liconv
 :info:build       LDFLAGS    = -dynamic -Wl,-search_paths_first -lkrb5
 -L/opt/local/lib -arch x86_64 -L./bin
 :info:build       DYNEXP     =
 :info:build       LDSHFLAGS  = -dynamiclib -flat_namespace -undefined
 suppress  -dynamic -Wl,-search_paths_first -lkrb5 -L/opt/local/lib -arch
 x86_64 -L./bin
 :info:build       SHLIBEXT   = dylib
 :info:build       SONAMEFLAG = #
 :info:build Linking bin/nmbd
 :info:build Undefined symbols for architecture x86_64:
 :info:build   "_error_message", referenced from:
 :info:build       _cli_session_setup_spnego in cliconnect.o
 :info:build       _handle_krberror_packet in clikrb5.o
 :info:build       _smb_krb5_verify_checksum in clikrb5.o
 :info:build       _create_kerberos_key_from_string_direct in clikrb5.o
 :info:build       _krb5_rd_req_return_keyblock_from_keytab in clikrb5.o
 :info:build       _smb_krb5_renew_ticket in clikrb5.o
 :info:build       _cli_krb5_get_ticket in clikrb5.o
 :info:build       ...
 :info:build ld: symbol(s) not found for architecture x86_64
 :info:build collect2: ld returned 1 exit status
 :info:build make: *** [bin/nmbd] Error 1
 :info:build make: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source'
 :info:build shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/work/samba-3.2.15/source"
 && /usr/bin/make -w all " returned error 2
 :error:build Target org.macports.build returned: shell command failed (see
 log for details)
 :debug:build Backtrace: shell command failed (see log for details)
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: the following items did not execute (for samba3):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 :notice:build Log for samba3 is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_samba3/samba3/main.log
 }}}

--

Comment:

 Please clean and try again and attach the new main.log. The log you
 attached before is incomplete so it's hard to tell what happened.

-- 
Ticket URL: <https://trac.macports.org/ticket/31462#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS