[MacPorts] #33846: aspell: build fails
MacPorts
noreply at macports.org
Tue Apr 10 13:23:31 PDT 2012
#33846: aspell: build fails
----------------------------+-----------------------------------------------
Reporter: amatasc@… | Owner: jochen@…
Type: defect | Status: assigned
Priority: Normal | Milestone:
Component: ports | Version: 2.0.4
Keywords: | Port: aspell
----------------------------+-----------------------------------------------
Changes (by jochen@…):
* status: new => assigned
Old description:
> {{{
> amatasc:~ amatasc$ sudo port -v selfupdate
> Password:
> Warning: xcodebuild exists but failed to execute
> ---> Updating MacPorts base sources using rsync
> receiving file list ... done
> base.tar
>
> sent 10894 bytes received 111 bytes 3144.29 bytes/sec
> total size is 3236352 speedup is 294.08
> receiving file list ... done
> base.tar.rmd160
>
> sent 64 bytes received 116 bytes 72.00 bytes/sec
> total size is 512 speedup is 2.84
> MacPorts base version 2.0.4 installed,
> MacPorts base version 2.0.4 downloaded.
> ---> Updating the ports tree
> Synchronizing local ports tree from
> rsync://rsync.macports.org/release/tarballs/ports.tar
> receiving file list ... done
> ports.tar
>
> sent 49548 bytes received 1468 bytes 6001.88 bytes/sec
> total size is 49940992 speedup is 978.93
> receiving file list ... done
> ports.tar.rmd160
>
> sent 64 bytes received 636 bytes 280.00 bytes/sec
> total size is 512 speedup is 0.73
> Warning: xcodebuild exists but failed to execute
> Creating port index in
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports
>
> Total number of ports parsed: 0
> Ports successfully parsed: 0
> Ports failed: 0
> Up-to-date ports skipped: 13779
>
> ---> MacPorts base is already the latest version
>
> The ports tree has been updated. To upgrade your installed ports, you
> should run
> port upgrade outdated
> amatasc:~ amatasc$ port upgrade outdated
> Error: No ports matched the given expression
> amatasc:~ amatasc$ sudo port upgrade outdated
> Warning: xcodebuild exists but failed to execute
> Error: No ports matched the given expression
> amatasc:~ amatasc$ port
> MacPorts 2.0.4
> Entering interactive mode... ("help" for help, "quit" to quit)
> [Users/amatasc] > help
> port
> [-bcdfknopqRstuvy] [-D portdir] [-F cmdfile] action [privopts]
> [actionflags]
> [[portname|pseudo-portname|port-url] [@version] [+-variant]...
> [option=value]...]...
>
> Supported actions
> ------------------
> activate, archive, archivefetch, build, cat, cd, checksum, clean,
> configure,
> contents, deactivate, dependents, deps, destroot, dir, distcheck,
> distfiles,
> dmg, dpkg, echo, ed, edit, exit, extract, fetch, file, gohome, help,
> info, install, installed, lint, list, livecheck, load, location, log,
> logfile, mdmg, mirror, mpkg, notes, outdated, patch, pkg, platform,
> portpkg, provides, quit, rdependents, rdeps, rpm, search, select,
> selfupdate,
> setrequested, space, srpm, submit, sync, test, unarchive, uninstall,
> unload, unsetrequested, upgrade, url, usage, variants, version, work
>
> Pseudo-portnames
> ----------------
> Pseudo-portnames are words that may be used in place of a portname, and
> which expand to some set of ports. The common pseudo-portnames are:
> all, current, active, inactive, actinact, installed, uninstalled,
> outdated,
> obsolete, requested, unrequested and leaves.
> These pseudo-portnames expand to the set of ports named.
>
> Pseudo-portnames starting with variants:, variant:, description:,
> depends:,
> depends_lib:, depends_run:, depends_build:, depends_fetch:,
> depends_extract:,
> portdir:, homepage:, epoch:, platforms:, platform:, name:,
> long_description:,
> maintainers:, maintainer:, categories:, category:, version:, revision:,
> and
> license: each select a set of ports based on a regex search of metadata
> about the ports. In all such cases, a standard regex pattern following
> the colon will be used to select the set of ports to which the
> pseudo-portname expands.
>
> Pseudo-portnames starting with depof:, rdepof:, dependentof:, and
> rdependentof:
> select ports that are direct or recursive dependencies or dependents of
> the
> following portname, respectively.
>
> Portnames that contain standard glob characters will be expanded to the
> set of ports matching the glob pattern.
>
> Port expressions
> ----------------
> Portnames, port glob patterns, and pseudo-portnames may be logically
> combined using expressions consisting of and, or, not, !, (, and ).
>
> For more information
> --------------------
> See man pages: port(1), macports.conf(5), portfile(7), portgroup(7),
> porthier(7), portstyle(7). Also, see http://www.macports.org.
>
> [Users/amatasc] > quit
> Goodbye
> amatasc:~ amatasc$ sudo port install gedit
> Warning: xcodebuild exists but failed to execute
> Warning: Xcode appears to be installed but xcodebuild is unusable; some
> ports will likely fail to build.
> Warning: You may need to run `sudo xcode-select -switch
> /Applications/Xcode.app`
> ---> Computing dependencies for gedit
> ---> Dependencies to be installed: enchant aspell gettext expat expat
> libiconv gperf ncurses ncursesw gettext texinfo xz glib2 libffi perl5
> perl5.12 gdbm perl5.12 perl5 perl5 zlib glib2 hunspell readline pkgconfig
> pkgconfig pkgconfig gconf dbus-glib dbus gtk-doc docbook-xml docbook-
> xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4
> docbook-xml-4.5 docbook-xml-5.0 docbook-xsl docbook-xsl gnome-doc-utils
> intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-
> list-utils p5.12-xml-parser intltool iso-codes iso-codes libxslt libxml2
> libxml2 libxslt py27-libxml2 python27 bzip2 db46 libedit openssl
> python_select sqlite3 python27 rarian getopt rarian gnome-doc-utils gtk2
> atk gdk-pixbuf2 jasper jpeg libpng tiff hicolor-icon-theme pango Xft2
> fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto xorg-inputproto
> xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-libxcb xorg-
> libpthread-stubs xorg-xcb-proto xorg-xcmiscproto xorg-xextproto xorg-
> xf86bigfontproto xorg-xtrans xorg-renderproto cairo libpixman xorg-xcb-
> util shared-mime-info xorg-libXcomposite xorg-compositeproto xorg-libXext
> autoconf help2man p5.12-locale-gettext m4 autoconf automake libtool xorg-
> util-macros xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-
> libXdamage xorg-damageproto xorg-libXi xorg-libXinerama xorg-
> xineramaproto xorg-libXrandr xorg-randrproto orbit2 libidl policykit
> eggdbus py27-pygtksourceview gtksourceview2 py27-gobject py27-gtk
> libglade2 py27-cairo py27-numpy fftw-3 py27-nose nosetests_select
> py27-distribute py27-py xorg-libsm xorg-libice
> ---> Fetching archive for expat
> ---> Attempting to fetch expat-2.0.1_1.darwin_11.x86_64.tbz2 from
> http://packages.macports.org/expat
> ---> Fetching expat
> ---> Attempting to fetch expat-2.0.1.tar.gz from
> http://lil.fr.distfiles.macports.org/expat
> ---> Verifying checksum(s) for expat
> ---> Extracting expat
> ---> Configuring expat
> ---> Building expat
> ---> Staging expat into destroot
> ---> Installing expat @2.0.1_1
> ---> Activating expat @2.0.1_1
> ---> Cleaning expat
> ---> Cleaning expat
> ---> Fetching archive for gperf
> ---> Attempting to fetch gperf-3.0.4_2.darwin_11.x86_64.tbz2 from
> http://packages.macports.org/gperf
> ---> Fetching gperf
> ---> Attempting to fetch gperf-3.0.4.tar.gz from
> http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gperf
> ---> Verifying checksum(s) for gperf
> ---> Extracting gperf
> ---> Applying patches to gperf
> ---> Configuring gperf
> ---> Building gperf
> ---> Staging gperf into destroot
> ---> Installing gperf @3.0.4_2
> ---> Activating gperf @3.0.4_2
> ---> Cleaning gperf
> ---> Fetching archive for libiconv
> ---> Attempting to fetch libiconv-1.14_0.darwin_11.x86_64.tbz2 from
> http://packages.macports.org/libiconv
> ---> Fetching libiconv
> ---> Attempting to fetch libiconv-1.14.tar.gz from
> http://lil.fr.distfiles.macports.org/libiconv
> ---> Verifying checksum(s) for libiconv
> ---> Extracting libiconv
> ---> Applying patches to libiconv
> ---> Configuring libiconv
> ---> Building libiconv
> ---> Staging libiconv into destroot
> ---> Installing libiconv @1.14_0
> ---> Activating libiconv @1.14_0
> ---> Cleaning libiconv
> ---> Fetching archive for ncursesw
> ---> Attempting to fetch ncursesw-5.8_0.darwin_11.noarch.tbz2 from
> http://packages.macports.org/ncursesw
> ---> Fetching ncursesw
> ---> Verifying checksum(s) for ncursesw
> ---> Extracting ncursesw
> ---> Configuring ncursesw
> ---> Building ncursesw
> ---> Staging ncursesw into destroot
> ---> Installing ncursesw @5.8_0
> ---> Activating ncursesw @5.8_0
> ---> Cleaning ncursesw
> ---> Fetching archive for ncurses
> ---> Attempting to fetch ncurses-5.9_1.darwin_11.x86_64.tbz2 from
> http://packages.macports.org/ncurses
> ---> Fetching ncurses
> ---> Attempting to fetch ncurses-5.9.tar.gz from
> http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/ncurses
> ---> Verifying checksum(s) for ncurses
> ---> Extracting ncurses
> ---> Applying patches to ncurses
> ---> Configuring ncurses
> ---> Building ncurses
> ---> Staging ncurses into destroot
> ---> Installing ncurses @5.9_1
> ---> Activating ncurses @5.9_1
> ---> Cleaning ncurses
> ---> Fetching archive for gettext
> ---> Attempting to fetch gettext-0.18.1.1_2.darwin_11.x86_64.tbz2 from
> http://packages.macports.org/gettext
> ---> Fetching gettext
> ---> Attempting to fetch gettext-0.18.1.1.tar.gz from
> http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gettext
> ---> Verifying checksum(s) for gettext
> ---> Extracting gettext
> ---> Applying patches to gettext
> ---> Configuring gettext
> ---> Building gettext
> ---> Staging gettext into destroot
> ---> Installing gettext @0.18.1.1_2
> ---> Activating gettext @0.18.1.1_2
> ---> Cleaning gettext
> ---> Cleaning gettext
> ---> Fetching archive for xz
> ---> Attempting to fetch xz-5.0.3_0.darwin_11.x86_64.tbz2 from
> http://packages.macports.org/xz
> ---> Fetching xz
> ---> Attempting to fetch xz-5.0.3.tar.bz2 from
> http://lil.fr.distfiles.macports.org/xz
> ---> Verifying checksum(s) for xz
> ---> Extracting xz
> ---> Configuring xz
> ---> Building xz
> ---> Staging xz into destroot
> ---> Installing xz @5.0.3_0
> ---> Activating xz @5.0.3_0
> ---> Cleaning xz
> ---> Fetching archive for texinfo
> ---> Attempting to fetch texinfo-4.13_2.darwin_11.x86_64.tbz2 from
> http://packages.macports.org/texinfo
> ---> Fetching texinfo
> ---> Attempting to fetch texinfo-4.13.tar.lzma from
> http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/texinfo
> ---> Verifying checksum(s) for texinfo
> ---> Extracting texinfo
> ---> Configuring texinfo
> ---> Building texinfo
> ---> Staging texinfo into destroot
> ---> Installing texinfo @4.13_2
> ---> Activating texinfo @4.13_2
> ---> Cleaning texinfo
> ---> Fetching archive for aspell
> ---> Attempting to fetch aspell-0.60.6_4+nonls.darwin_11.x86_64.tbz2
> from http://packages.macports.org/aspell
> ---> Fetching aspell
> ---> Attempting to fetch aspell-0.60.6.tar.gz from
> ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/distfiles/
> ---> Verifying checksum(s) for aspell
> ---> Extracting aspell
> ---> Applying patches to aspell
> ---> Configuring aspell
> ---> Building aspell
> Error: Target org.macports.build returned: shell command failed (see log
> for details)
> Error: Failed to install aspell
> Log for aspell is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_textproc_aspell/aspell/main.log
> Error: The following dependencies were not installed: enchant aspell
> glib2 libffi perl5 perl5.12 gdbm perl5.12 perl5 perl5 zlib glib2 hunspell
> readline pkgconfig pkgconfig pkgconfig gconf dbus-glib dbus gtk-doc
> docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3
> docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl docbook-xsl
> gnome-doc-utils intltool gnome-common p5.12-getopt-long p5.12-pathtools
> p5.12-scalar-list-utils p5.12-xml-parser intltool iso-codes iso-codes
> libxslt libxml2 libxml2 libxslt py27-libxml2 python27 bzip2 db46 libedit
> openssl python_select sqlite3 python27 rarian getopt rarian gnome-doc-
> utils gtk2 atk gdk-pixbuf2 jasper jpeg libpng tiff hicolor-icon-theme
> pango Xft2 fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto
> xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-
> libxcb xorg-libpthread-stubs xorg-xcb-proto xorg-xcmiscproto xorg-
> xextproto xorg-xf86bigfontproto xorg-xtrans xorg-renderproto cairo
> libpixman xorg-xcb-util shared-mime-info xorg-libXcomposite xorg-
> compositeproto xorg-libXext autoconf help2man p5.12-locale-gettext m4
> autoconf automake libtool xorg-util-macros xorg-libXfixes xorg-fixesproto
> xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-
> libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto orbit2
> libidl policykit eggdbus py27-pygtksourceview gtksourceview2 py27-gobject
> py27-gtk libglade2 py27-cairo py27-numpy fftw-3 py27-nose
> nosetests_select py27-distribute py27-py xorg-libsm xorg-libice
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
> amatasc:~ amatasc$
> }}}
New description:
Hi amatasc,
can you please provide the information suggested by ryandesign? Otherwise
I'll close this as worksforme...
Best
--
--
Ticket URL: <https://trac.macports.org/ticket/33846#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list