[MacPorts] #34019: vtk5 @5.6.1_0+data+python27+qt4_mac+tcltk Unable to verify file checksums
MacPorts
noreply at macports.org
Thu Apr 12 16:25:52 PDT 2012
#34019: vtk5 @5.6.1_0+data+python27+qt4_mac+tcltk Unable to verify file checksums
-------------------------------------+--------------------------------------
Reporter: bobby.mendoza@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.0.4
Keywords: | Port:
-------------------------------------+--------------------------------------
I have been getting checksum errors whenever I upgrade vtkdata-5.8.0:
{{{
Error: Checksum (md5) mismatch for vtkdata-5.8.0.tar.gz
Error: Checksum (sha1) mismatch for vtkdata-5.8.0.tar.gz
Error: Checksum (rmd160) mismatch for vtkdata-5.8.0.tar.gz
Error: Target org.macports.checksum returned: Unable to verify file
checksums
}}}
I have attached the log output. If it helps, here is the result of the
debug upgrade
{{{
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: vtk5 5.8.0_0 exists in the ports tree
DEBUG: vtk5 5.6.1_0 +data+python27+qt4_mac+tcltk is the latest installed
DEBUG: vtk5 5.6.1_0 +data+python27+qt4_mac+tcltk is active
DEBUG: Merging existing variants '+data+python27+qt4_mac+tcltk' into
variants
DEBUG: new fully merged portvariants: qt4_mac + tcltk + data + python27 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/vtk5
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Executing variant tcltk provides tcltk
DEBUG: Executing variant python27 provides python27
DEBUG: Executing variant qt4_mac provides qt4_mac
DEBUG: Executing variant data provides data
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cmake 2.8.7_0 exists in the ports tree
DEBUG: cmake 2.8.7_0 +gui is the latest installed
DEBUG: cmake 2.8.7_0 +gui is active
DEBUG: Merging existing variants '+gui' into variants
DEBUG: new fully merged portvariants: gui +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cmake
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant gui provides gui
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
DEBUG: No need to upgrade! cmake 2.8.7_0 >= cmake 2.8.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libidn 1.22_0 exists in the ports tree
DEBUG: libidn 1.22_0 is the latest installed
DEBUG: libidn 1.22_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/mail/libidn
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! libidn 1.22_0 >= libidn 1.22_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.14_0 exists in the ports tree
DEBUG: libiconv 1.14_0 is the latest installed
DEBUG: libiconv 1.14_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_2 exists in the ports tree
DEBUG: gettext 0.18.1.1_2 is the latest installed
DEBUG: gettext 0.18.1.1_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.9_1 exists in the ports tree
DEBUG: ncurses 5.9_1 is the latest installed
DEBUG: ncurses 5.9_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.1.0_0 exists in the ports tree
DEBUG: expat 2.1.0_0 is the latest installed
DEBUG: expat 2.1.0_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 1.0.1_2 exists in the ports tree
DEBUG: openssl 1.0.1_2 is the latest installed
DEBUG: openssl 1.0.1_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! openssl 1.0.1_2 >= openssl 1.0.1_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.6_0 exists in the ports tree
DEBUG: zlib 1.2.6_0 is the latest installed
DEBUG: zlib 1.2.6_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! zlib 1.2.6_0 >= zlib 1.2.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: qt4-mac 4.7.4_1 exists in the ports tree
DEBUG: qt4-mac 4.7.4_1 +mysql+quartz is the latest installed
DEBUG: qt4-mac 4.7.4_1 +mysql+quartz is active
DEBUG: Merging existing variants '+mysql+quartz' into variants
DEBUG: new fully merged portvariants: mysql + quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/aqua/qt4-mac
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant mysql provides mysql
DEBUG: Executing variant quartz provides quartz
DEBUG: No need to upgrade! qt4-mac 4.7.4_1 >= qt4-mac 4.7.4_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dbus 1.4.18_0 exists in the ports tree
DEBUG: dbus 1.4.18_0 is the latest installed
DEBUG: dbus 1.4.18_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! dbus 1.4.18_0 >= dbus 1.4.18_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.7.11_0 exists in the ports tree
DEBUG: sqlite3 3.7.11_0 is the latest installed
DEBUG: sqlite3 3.7.11_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! sqlite3 3.7.11_0 >= sqlite3 3.7.11_0
DEBUG: epoch: in tree: 20090923 installed: 20090923
DEBUG: libedit 20110802-3.0_0 exists in the ports tree
DEBUG: libedit 20110802-3.0_0 is the latest installed
DEBUG: libedit 20110802-3.0_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! libedit 20110802-3.0_0 >= libedit
20110802-3.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tiff 3.9.5_0 exists in the ports tree
DEBUG: tiff 3.9.5_0 is the latest installed
DEBUG: tiff 3.9.5_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 8d_0 exists in the ports tree
DEBUG: jpeg 8d_0 is the latest installed
DEBUG: jpeg 8d_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.4.11_0 exists in the ports tree
DEBUG: libpng 1.4.11_0 is the latest installed
DEBUG: libpng 1.4.11_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! libpng 1.4.11_0 >= libpng 1.4.11_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libmng 1.0.10_2 exists in the ports tree
DEBUG: libmng 1.0.10_2 is the latest installed
DEBUG: libmng 1.0.10_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libmng
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lcms 1.19_2 exists in the ports tree
DEBUG: lcms 1.19_2 is the latest installed
DEBUG: lcms 1.19_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: mysql5 5.1.61_0 exists in the ports tree
DEBUG: mysql5 5.1.61_0 is the latest installed
DEBUG: mysql5 5.1.61_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/mysql5
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! mysql5 5.1.61_0 >= mysql5 5.1.61_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.2.000_0 exists in the ports tree
DEBUG: readline 6.2.000_0 is the latest installed
DEBUG: readline 6.2.000_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.26_1 exists in the ports tree
DEBUG: pkgconfig 0.26_1 is the latest installed
DEBUG: pkgconfig 0.26_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! pkgconfig 0.26_1 >= pkgconfig 0.26_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glib2 2.32.0_1 exists in the ports tree
DEBUG: glib2 2.32.0_1 is the latest installed
DEBUG: glib2 2.32.0_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! glib2 2.32.0_1 >= glib2 2.32.0_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libffi 3.0.10_2 exists in the ports tree
DEBUG: libffi 3.0.10_2 is the latest installed
DEBUG: libffi 3.0.10_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.12.3_1 exists in the ports tree
DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed
DEBUG: perl5 5.12.3_1 +perl5_12 is active
DEBUG: Merging existing variants '+perl5_12' into variants
DEBUG: new fully merged portvariants: perl5_12 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: Executing variant perl5_12 provides perl5_12
DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.12 5.12.4_0 exists in the ports tree
DEBUG: perl5.12 5.12.4_0 is the latest installed
DEBUG: perl5.12 5.12.4_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! perl5.12 5.12.4_0 >= perl5.12 5.12.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gdbm 1.10_1 exists in the ports tree
DEBUG: gdbm 1.10_1 is the latest installed
DEBUG: gdbm 1.10_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tcl 8.5.11_0 exists in the ports tree
DEBUG: tcl 8.5.11_0 is the latest installed
DEBUG: tcl 8.5.11_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/tcl
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! tcl 8.5.11_0 >= tcl 8.5.11_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tk 8.5.11_0 exists in the ports tree
DEBUG: tk 8.5.11_0 is the latest installed
DEBUG: tk 8.5.11_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/tk
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: No need to upgrade! tk 8.5.11_0 >= tk 8.5.11_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.3.0_0 exists in the ports tree
DEBUG: Xft2 2.3.0_0 is the latest installed
DEBUG: Xft2 2.3.0_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! Xft2 2.3.0_0 >= Xft2 2.3.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.7_0 exists in the ports tree
DEBUG: xrender 0.9.7_0 is the latest installed
DEBUG: xrender 0.9.7_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.4.99.901_0 exists in the ports tree
DEBUG: xorg-libX11 1.4.99.901_0 is the latest installed
DEBUG: xorg-libX11 1.4.99.901_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libX11
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libX11 1.4.99.901_0 >= xorg-libX11
1.4.99.901_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.1.1_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.1.1_0 is the latest installed
DEBUG: xorg-libXdmcp 1.1.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libXdmcp
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.7_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.7_0 is the latest installed
DEBUG: xorg-libXau 1.0.7_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libXau
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.23_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.23_0 is the latest installed
DEBUG: xorg-xproto 7.0.23_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-xproto
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto 7.0.23_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libxcb 1.8.1_1 exists in the ports tree
DEBUG: xorg-libxcb 1.8.1_1 +python27 is the latest installed
DEBUG: xorg-libxcb 1.8.1_1 +python27 is active
DEBUG: Merging existing variants '+python27' into variants
DEBUG: new fully merged portvariants: python27 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libxcb
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant python27 provides python27
DEBUG: No need to upgrade! xorg-libxcb 1.8.1_1 >= xorg-libxcb 1.8.1_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcb-proto 1.7.1_0 exists in the ports tree
DEBUG: xorg-xcb-proto 1.7.1_0 +python27 is the latest installed
DEBUG: xorg-xcb-proto 1.7.1_0 +python27 is active
DEBUG: Merging existing variants '+python27' into variants
DEBUG: new fully merged portvariants: python27 +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-xcb-proto
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: Executing variant python27 provides python27
DEBUG: No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto
1.7.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxml2 2.7.8_0 exists in the ports tree
DEBUG: libxml2 2.7.8_0 is the latest installed
DEBUG: libxml2 2.7.8_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
DEBUG: epoch: in tree: 2 installed: 2
DEBUG: python27 2.7.2_4 exists in the ports tree
DEBUG: python27 2.7.2_4 is the latest installed
DEBUG: python27 2.7.2_4 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! python27 2.7.2_4 >= python27 2.7.2_4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: db46 4.6.21_6 exists in the ports tree
DEBUG: db46 4.6.21_6 is the latest installed
DEBUG: db46 4.6.21_6 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.6_0 exists in the ports tree
DEBUG: bzip2 1.0.6_0 is the latest installed
DEBUG: bzip2 1.0.6_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python_select 0.3_1 exists in the ports tree
DEBUG: python_select 0.3_1 is the latest installed
DEBUG: python_select 0.3_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libpthread-stubs 0.3_0 exists in the ports tree
DEBUG: xorg-libpthread-stubs 0.3_0 is the latest installed
DEBUG: xorg-libpthread-stubs 0.3_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libpthread-stubs
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-
stubs 0.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.6_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.6_0 is the latest installed
DEBUG: xorg-kbproto 1.0.6_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-kbproto
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11.1_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11.1_0 is the latest installed
DEBUG: xorg-renderproto 0.11.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-renderproto
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto
0.11.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.4.9_1 exists in the ports tree
DEBUG: freetype 2.4.9_1 is the latest installed
DEBUG: freetype 2.4.9_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! freetype 2.4.9_1 >= freetype 2.4.9_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.9.0_1 exists in the ports tree
DEBUG: fontconfig 2.9.0_1 is the latest installed
DEBUG: fontconfig 2.9.0_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXScrnSaver 1.2.2_0 exists in the ports tree
DEBUG: xorg-libXScrnSaver 1.2.2_0 is the latest installed
DEBUG: xorg-libXScrnSaver 1.2.2_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libXScrnSaver
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.2_0 >= xorg-
libXScrnSaver 1.2.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.3.1_0 exists in the ports tree
DEBUG: xorg-libXext 1.3.1_0 is the latest installed
DEBUG: xorg-libXext 1.3.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-libXext
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext 1.3.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.2.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.2.1_0 is the latest installed
DEBUG: xorg-xextproto 7.2.1_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-xextproto
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto
7.2.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-scrnsaverproto 1.2.2_0 exists in the ports tree
DEBUG: xorg-scrnsaverproto 1.2.2_0 is the latest installed
DEBUG: xorg-scrnsaverproto 1.2.2_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
/xorg-scrnsaverproto
DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.2_0 >= xorg-
scrnsaverproto 1.2.2_0
DEBUG: Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_vtk5/vtk5/work
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/vtk5/work
DEBUG: changing euid/egid - current euid: 0 - current egid: 0
DEBUG: egid changed to: 501
DEBUG: euid changed to: 502
DEBUG: Starting logging for vtk5
---> Computing dependencies for vtk5
DEBUG: Searching for dependency: cmake
DEBUG: Found Dependency: receipt exists for cmake
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: qt4-mac
DEBUG: Found Dependency: receipt exists for qt4-mac
DEBUG: Searching for dependency: tcl
DEBUG: Found Dependency: receipt exists for tcl
DEBUG: Searching for dependency: tk
DEBUG: Found Dependency: receipt exists for tk
DEBUG: Executing org.macports.main (vtk5)
DEBUG: changing euid/egid - current euid: 0 - current egid: 0
DEBUG: egid changed to: 501
DEBUG: euid changed to: 502
DEBUG: archivefetch phase started at Thu Apr 12 16:15:52 PDT 2012
---> Fetching archive for vtk5
DEBUG: Executing org.macports.archivefetch (vtk5)
DEBUG: euid/egid changed to: 0/0
DEBUG: chowned /opt/local/var/macports/software/vtk5 to macports
DEBUG: euid/egid changed to: 502/501
DEBUG: euid/egid changed to: 0/0
DEBUG: chowned /opt/local/var/macports/incoming to macports
DEBUG: euid/egid changed to: 502/501
---> vtk5-5.8.0_0+data+python27+qt4_mac+tcltk.darwin_11.x86_64.tbz2
doesn't seem to exist in /opt/local/var/macports/software/vtk5
---> Attempting to fetch
vtk5-5.8.0_0+data+python27+qt4_mac+tcltk.darwin_11.x86_64.tbz2 from
http://packages.macports.org/vtk5
% Total % Received % Xferd Average Speed Time Time Time
Current
Dload Upload Total Spent Left
Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:--
0
DEBUG: Fetching archive failed:: The requested URL returned error: 404
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: fetch phase started at Thu Apr 12 16:15:52 PDT 2012
---> Fetching vtk5
DEBUG: euid/egid changed to: 0/0
DEBUG: chowned /opt/local/var/macports/distfiles/vtk5 to macports
DEBUG: euid/egid changed to: 502/501
DEBUG: Executing org.macports.fetch (vtk5)
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: checksum phase started at Thu Apr 12 16:15:52 PDT 2012
---> Verifying checksum(s) for vtk5
DEBUG: Executing org.macports.checksum (vtk5)
---> Checksumming vtk-5.8.0.tar.gz
DEBUG: Correct (md5) checksum for vtk-5.8.0.tar.gz
DEBUG: Correct (sha1) checksum for vtk-5.8.0.tar.gz
DEBUG: Correct (rmd160) checksum for vtk-5.8.0.tar.gz
---> Checksumming vtkdata-5.8.0.tar.gz
Error: Checksum (md5) mismatch for vtkdata-5.8.0.tar.gz
Portfile checksum: vtkdata-5.8.0.tar.gz md5
67263bd972f923d39a60f01104368779
Distfile checksum: vtkdata-5.8.0.tar.gz md5
a05295b81930e894fc0e31866f399151
Error: Checksum (sha1) mismatch for vtkdata-5.8.0.tar.gz
Portfile checksum: vtkdata-5.8.0.tar.gz sha1
7350863d6351a961c4813ad6e73f74428307cd35
Distfile checksum: vtkdata-5.8.0.tar.gz sha1
3bdb4414beaca5a338d1a504f8f261b7915cf39a
Error: Checksum (rmd160) mismatch for vtkdata-5.8.0.tar.gz
Portfile checksum: vtkdata-5.8.0.tar.gz rmd160
b77b5f6919beae406712b93cd333dd4fad5ff3d1
Distfile checksum: vtkdata-5.8.0.tar.gz rmd160
12541bf51f64871a35176558016cf97ccf881291
The correct checksum line may be:
checksums vtk-5.8.0.tar.gz \
md5 37b7297d02d647cc6ca95b38174cb41f \
sha1 ece52f4fa92811fe927581e60ecb39a8a5f68cd9 \
rmd160 f100af93c4a4fc6a601aef563d3dd846d7aee914 \
vtkdata-5.8.0.tar.gz \
md5 a05295b81930e894fc0e31866f399151 \
sha1 3bdb4414beaca5a338d1a504f8f261b7915cf39a \
rmd160 12541bf51f64871a35176558016cf97ccf881291
Error: Target org.macports.checksum returned: Unable to verify file
checksums
DEBUG: Backtrace: Unable to verify file checksums
while executing
"$procedure $targetname"
Warning: the following items did not execute (for vtk5):
org.macports.install org.macports.checksum org.macports.extract
org.macports.patch org.macports.configure org.macports.build
org.macports.destroot
Log for vtk5 is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_vtk5/vtk5/main.log
DEBUG: couldn't open
"/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex":
no such file or directory
while executing
"open [file join $dir tclIndex]"
Error: Unable to upgrade port: 1
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
As reported in the log, I do not have:
{{{
/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex
}}}
But I do have:
{{{
/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/Scripts/tclIndex
}}}
What am I doing wrong? Thanks.
--
Ticket URL: <https://trac.macports.org/ticket/34019>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list