[MacPorts] #35734: installing xfce failed due to failure to build midori

Sat Aug 18 12:19:48 PDT 2012

#35734: installing xfce failed due to failure to build midori
-----------------------------------+----------------------------------------
 Reporter:  atlasfallen@…          |       Owner:  macports-tickets@…                   
     Type:  defect                 |      Status:  new                                  
 Priority:  Normal                 |   Milestone:                                       
Component:  ports                  |     Version:  2.1.2                                
 Keywords:                         |        Port:  midori                               
-----------------------------------+----------------------------------------
 "org.macports.build for port midori returned: command execution failed"
 below is the content of the log file for attempting to install midori
 alone.
 My goal is to install the xfce port, midori is just the obstacle along the
 way
 I'm open to suggestion on getting midori to build, or a work-a-round
 resulting in successful port installation of xfce minus midori.
 Thanks!
 system:
 ibook g3 900mhz 640mb ram
 OS X 10.4.11
 xcode 2.5
 macports built from source a couple days ago


 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gtk2 2.24.11_0 exists in the ports tree
 :debug:main gtk2 2.24.11_0 +x11 is the latest installed
 :debug:main gtk2 2.24.11_0 +x11 is active
 :debug:main Merging existing variants '+x11' into variants
 :debug:main new fully merged portvariants: x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! gtk2 2.24.11_0 >= gtk2 2.24.11_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main atk 2.2.0_2 exists in the ports tree
 :debug:main atk 2.2.0_2  is the latest installed
 :debug:main atk 2.2.0_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! atk 2.2.0_2 >= atk 2.2.0_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main glib2 2.32.4_0 exists in the ports tree
 :debug:main glib2 2.32.4_0  is the latest installed
 :debug:main glib2 2.32.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! glib2 2.32.4_0 >= glib2 2.32.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2  is the latest installed
 :debug:main gettext 0.18.1.1_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.14_0 exists in the ports tree
 :debug:main libiconv 1.14_0  is the latest installed
 :debug:main libiconv 1.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.9_1 exists in the ports tree
 :debug:main ncurses 5.9_1  is the latest installed
 :debug:main ncurses 5.9_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.1.0_0 exists in the ports tree
 :debug:main expat 2.1.0_0  is the latest installed
 :debug:main expat 2.1.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.7_0 exists in the ports tree
 :debug:main zlib 1.2.7_0  is the latest installed
 :debug:main zlib 1.2.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libffi 3.0.11_0 exists in the ports tree
 :debug:main libffi 3.0.11_0  is the latest installed
 :debug:main libffi 3.0.11_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libffi 3.0.11_0 >= libffi 3.0.11_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5 5.12.4_0 exists in the ports tree
 :debug:main perl5 5.12.4_0 +perl5_12 is the latest installed
 :debug:main perl5 5.12.4_0 +perl5_12 is active
 :debug:main Merging existing variants '+perl5_12' into variants
 :debug:main new fully merged portvariants: perl5_12 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Executing variant perl5_12 provides perl5_12
 :debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5.12 5.12.4_1 exists in the ports tree
 :debug:main perl5.12 5.12.4_1  is the latest installed
 :debug:main perl5.12 5.12.4_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdbm 1.10_2 exists in the ports tree
 :debug:main gdbm 1.10_2  is the latest installed
 :debug:main gdbm 1.10_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main python27 2.7.3_0 exists in the ports tree
 :debug:main python27 2.7.3_0  is the latest installed
 :debug:main python27 2.7.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.1c_0 exists in the ports tree
 :debug:main openssl 1.0.1c_0  is the latest installed
 :debug:main openssl 1.0.1c_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main sqlite3 3.7.13_0 exists in the ports tree
 :debug:main sqlite3 3.7.13_0  is the latest installed
 :debug:main sqlite3 3.7.13_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! sqlite3 3.7.13_0 >= sqlite3 3.7.13_0
 :debug:main epoch: in tree: 20090923 installed: 20090923
 :debug:main libedit 20120601-3.0_0 exists in the ports tree
 :debug:main libedit 20120601-3.0_0  is the latest installed
 :debug:main libedit 20120601-3.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit
 20120601-3.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main db46 4.6.21_6 exists in the ports tree
 :debug:main db46 4.6.21_6 +java is the latest installed
 :debug:main db46 4.6.21_6 +java is active
 :debug:main Merging existing variants '+java' into variants
 :debug:main new fully merged portvariants: java +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant java provides java
 :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0  is the latest installed
 :debug:main bzip2 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python_select 0.3_1 exists in the ports tree
 :debug:main python_select 0.3_1  is the latest installed
 :debug:main python_select 0.3_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gobject-introspection 1.32.1_3 exists in the ports tree
 :debug:main gobject-introspection 1.32.1_3  is the latest installed
 :debug:main gobject-introspection 1.32.1_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /gobject-introspection
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gobject-introspection 1.32.1_3 >= gobject-
 introspection 1.32.1_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cairo 1.12.2_0 exists in the ports tree
 :debug:main cairo 1.12.2_0 +x11 is the latest installed
 :debug:main cairo 1.12.2_0 +x11 is active
 :debug:main Merging existing variants '+x11' into variants
 :debug:main new fully merged portvariants: x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! cairo 1.12.2_0 >= cairo 1.12.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpixman 0.26.2_0 exists in the ports tree
 :debug:main libpixman 0.26.2_0  is the latest installed
 :debug:main libpixman 0.26.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libpixman 0.26.2_0 >= libpixman 0.26.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main fontconfig 2.9.0_1 exists in the ports tree
 :debug:main fontconfig 2.9.0_1  is the latest installed
 :debug:main fontconfig 2.9.0_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main freetype 2.4.10_0 exists in the ports tree
 :debug:main freetype 2.4.10_0  is the latest installed
 :debug:main freetype 2.4.10_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! freetype 2.4.10_0 >= freetype 2.4.10_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpng 1.4.12_0 exists in the ports tree
 :debug:main libpng 1.4.12_0  is the latest installed
 :debug:main libpng 1.4.12_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libpng 1.4.12_0 >= libpng 1.4.12_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xrender 0.9.7_0 exists in the ports tree
 :debug:main xrender 0.9.7_0  is the latest installed
 :debug:main xrender 0.9.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libX11 1.5.0_0 exists in the ports tree
 :debug:main xorg-libX11 1.5.0_0  is the latest installed
 :debug:main xorg-libX11 1.5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libX11
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11 1.5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree
 :debug:main xorg-libXdmcp 1.1.1_0  is the latest installed
 :debug:main xorg-libXdmcp 1.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXdmcp
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp
 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXau 1.0.7_0 exists in the ports tree
 :debug:main xorg-libXau 1.0.7_0  is the latest installed
 :debug:main xorg-libXau 1.0.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXau
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xproto 7.0.23_0 exists in the ports tree
 :debug:main xorg-xproto 7.0.23_0  is the latest installed
 :debug:main xorg-xproto 7.0.23_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto
 7.0.23_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libxcb 1.8.1_2 exists in the ports tree
 :debug:main xorg-libxcb 1.8.1_2 +python27 is the latest installed
 :debug:main xorg-libxcb 1.8.1_2 +python27 is active
 :debug:main Merging existing variants '+python27' into variants
 :debug:main new fully merged portvariants: python27 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libxcb
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant python27 provides python27
 :debug:main No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb 1.8.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-proto 1.7.1_0 exists in the ports tree
 :debug:main xorg-xcb-proto 1.7.1_0 +python27 is the latest installed
 :debug:main xorg-xcb-proto 1.7.1_0 +python27 is active
 :debug:main Merging existing variants '+python27' into variants
 :debug:main new fully merged portvariants: python27 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xcb-proto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Executing variant python27 provides python27
 :debug:main No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto
 1.7.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxml2 2.7.8_0 exists in the ports tree
 :debug:main libxml2 2.7.8_0  is the latest installed
 :debug:main libxml2 2.7.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
 :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
 :debug:main xorg-libpthread-stubs 0.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libpthread-stubs
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
 libpthread-stubs 0.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-kbproto 1.0.6_0 exists in the ports tree
 :debug:main xorg-kbproto 1.0.6_0  is the latest installed
 :debug:main xorg-kbproto 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-kbproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto
 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
 :debug:main xorg-renderproto 0.11.1_0  is the latest installed
 :debug:main xorg-renderproto 0.11.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-renderproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
 renderproto 0.11.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-util 0.3.9_0 exists in the ports tree
 :debug:main xorg-xcb-util 0.3.9_0  is the latest installed
 :debug:main xorg-xcb-util 0.3.9_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xcb-util
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util
 0.3.9_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main pango 1.30.1_1 exists in the ports tree
 :debug:main pango 1.30.1_1 +x11 is the latest installed
 :debug:main pango 1.30.1_1 +x11 is active
 :debug:main Merging existing variants '+x11' into variants
 :debug:main new fully merged portvariants: x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! pango 1.30.1_1 >= pango 1.30.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main Xft2 2.3.1_0 exists in the ports tree
 :debug:main Xft2 2.3.1_0  is the latest installed
 :debug:main Xft2 2.3.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! Xft2 2.3.1_0 >= Xft2 2.3.1_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main gdk-pixbuf2 2.26.2_0 exists in the ports tree
 :debug:main gdk-pixbuf2 2.26.2_0  is the latest installed
 :debug:main gdk-pixbuf2 2.26.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics
 /gdk-pixbuf2
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gdk-pixbuf2 2.26.2_0 >= gdk-pixbuf2
 2.26.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jasper 1.900.1_9 exists in the ports tree
 :debug:main jasper 1.900.1_9  is the latest installed
 :debug:main jasper 1.900.1_9  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jpeg 8d_0 exists in the ports tree
 :debug:main jpeg 8d_0  is the latest installed
 :debug:main jpeg 8d_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main tiff 3.9.5_0 exists in the ports tree
 :debug:main tiff 3.9.5_0  is the latest installed
 :debug:main tiff 3.9.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXi 1.6.1_0 exists in the ports tree
 :debug:main xorg-libXi 1.6.1_0  is the latest installed
 :debug:main xorg-libXi 1.6.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXi
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXi 1.6.1_0 >= xorg-libXi 1.6.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXext 1.3.1_0 exists in the ports tree
 :debug:main xorg-libXext 1.3.1_0  is the latest installed
 :debug:main xorg-libXext 1.3.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXext
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext
 1.3.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xextproto 7.2.1_0 exists in the ports tree
 :debug:main xorg-xextproto 7.2.1_0  is the latest installed
 :debug:main xorg-xextproto 7.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xextproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto
 7.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-inputproto 2.2_0 exists in the ports tree
 :debug:main xorg-inputproto 2.2_0  is the latest installed
 :debug:main xorg-inputproto 2.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-inputproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-inputproto 2.2_0 >= xorg-inputproto
 2.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree
 :debug:main xorg-libXrandr 1.3.2_0  is the latest installed
 :debug:main xorg-libXrandr 1.3.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXrandr
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr
 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-randrproto 1.4.0_0 exists in the ports tree
 :debug:main xorg-randrproto 1.4.0_0  is the latest installed
 :debug:main xorg-randrproto 1.4.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-randrproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-randrproto 1.4.0_0 >= xorg-randrproto
 1.4.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcursor 1.1.13_0 exists in the ports tree
 :debug:main xorg-libXcursor 1.1.13_0  is the latest installed
 :debug:main xorg-libXcursor 1.1.13_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXcursor
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXcursor 1.1.13_0 >= xorg-
 libXcursor 1.1.13_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXfixes 5.0_0 exists in the ports tree
 :debug:main xorg-libXfixes 5.0_0  is the latest installed
 :debug:main xorg-libXfixes 5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXfixes
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes
 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-fixesproto 5.0_0 exists in the ports tree
 :debug:main xorg-fixesproto 5.0_0  is the latest installed
 :debug:main xorg-fixesproto 5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-fixesproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto
 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXinerama 1.1.2_0 exists in the ports tree
 :debug:main xorg-libXinerama 1.1.2_0  is the latest installed
 :debug:main xorg-libXinerama 1.1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXinerama
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXinerama 1.1.2_0 >= xorg-
 libXinerama 1.1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-xineramaproto 1.2.1_0  is the latest installed
 :debug:main xorg-xineramaproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xineramaproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-
 xineramaproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
 :debug:main xorg-libXdamage 1.1.3_0  is the latest installed
 :debug:main xorg-libXdamage 1.1.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXdamage
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage
 1.1.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-damageproto 1.2.1_0  is the latest installed
 :debug:main xorg-damageproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-damageproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-
 damageproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
 :debug:main xorg-libXcomposite 0.4.3_0  is the latest installed
 :debug:main xorg-libXcomposite 0.4.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXcomposite
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
 libXcomposite 0.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
 :debug:main xorg-compositeproto 0.4.2_0  is the latest installed
 :debug:main xorg-compositeproto 0.4.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-compositeproto
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
 compositeproto 0.4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main shared-mime-info 1.0_0 exists in the ports tree
 :debug:main shared-mime-info 1.0_0  is the latest installed
 :debug:main shared-mime-info 1.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
 /shared-mime-info
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-info
 1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
 :debug:main hicolor-icon-theme 0.12_0  is the latest installed
 :debug:main hicolor-icon-theme 0.12_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /hicolor-icon-theme
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-
 theme 0.12_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main webkit-gtk 1.6.3_4 exists in the ports tree
 :debug:main webkit-gtk 1.6.3_4 +svg+video is the latest installed
 :debug:main webkit-gtk 1.6.3_4 +svg+video is active
 :debug:main Merging existing variants '+svg+video' into variants
 :debug:main new fully merged portvariants: svg + video +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/www
 /webkit-gtk
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant video provides video
 :debug:main Executing variant svg provides svg
 :debug:main No need to upgrade! webkit-gtk 1.6.3_4 >= webkit-gtk 1.6.3_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libsoup 2.38.1_0 exists in the ports tree
 :debug:main libsoup 2.38.1_0  is the latest installed
 :debug:main libsoup 2.38.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/libsoup
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libsoup 2.38.1_0 >= libsoup 2.38.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main glib-networking 2.28.7_4 exists in the ports tree
 :debug:main glib-networking 2.28.7_4  is the latest installed
 :debug:main glib-networking 2.28.7_4  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /glib-networking
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! glib-networking 2.28.7_4 >= glib-
 networking 2.28.7_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gnutls 2.12.19_0 exists in the ports tree
 :debug:main gnutls 2.12.19_0  is the latest installed
 :debug:main gnutls 2.12.19_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gnutls
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gnutls 2.12.19_0 >= gnutls 2.12.19_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgcrypt 1.5.0_0 exists in the ports tree
 :debug:main libgcrypt 1.5.0_0  is the latest installed
 :debug:main libgcrypt 1.5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgcrypt
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libgcrypt 1.5.0_0 >= libgcrypt 1.5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgpg-error 1.10_0 exists in the ports tree
 :debug:main libgpg-error 1.10_0  is the latest installed
 :debug:main libgpg-error 1.10_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
 /libgpg-error
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libtasn1 2.11_0 exists in the ports tree
 :debug:main libtasn1 2.11_0  is the latest installed
 :debug:main libtasn1 2.11_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtasn1
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libtasn1 2.11_0 >= libtasn1 2.11_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main lzo2 2.05_1 exists in the ports tree
 :debug:main lzo2 2.05_1  is the latest installed
 :debug:main lzo2 2.05_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! lzo2 2.05_1 >= lzo2 2.05_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main readline 6.2.000_0 exists in the ports tree
 :debug:main readline 6.2.000_0  is the latest installed
 :debug:main readline 6.2.000_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main libproxy 0.4.7_0 exists in the ports tree
 :debug:main libproxy 0.4.7_0 +python27 is the latest installed
 :debug:main libproxy 0.4.7_0 +python27 is active
 :debug:main Merging existing variants '+python27' into variants
 :debug:main new fully merged portvariants: python27 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/libproxy
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant python27 provides python27
 :debug:main No need to upgrade! libproxy 0.4.7_0 >= libproxy 0.4.7_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main gconf 2.28.1_3 exists in the ports tree
 :debug:main gconf 2.28.1_3  is the latest installed
 :debug:main gconf 2.28.1_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gconf
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gconf 2.28.1_3 >= gconf 2.28.1_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus-glib 0.100_0 exists in the ports tree
 :debug:main dbus-glib 0.100_0  is the latest installed
 :debug:main dbus-glib 0.100_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
 /dbus-glib
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! dbus-glib 0.100_0 >= dbus-glib 0.100_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus 1.4.20_1 exists in the ports tree
 :debug:main dbus 1.4.20_1 +startupitem is the latest installed
 :debug:main dbus 1.4.20_1 +startupitem is active
 :debug:main Merging existing variants '+startupitem' into variants
 :debug:main new fully merged portvariants: startupitem +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant startupitem provides startupitem
 :debug:main No need to upgrade! dbus 1.4.20_1 >= dbus 1.4.20_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main policykit 0.103_1 exists in the ports tree
 :debug:main policykit 0.103_1  is the latest installed
 :debug:main policykit 0.103_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security/policykit
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! policykit 0.103_1 >= policykit 0.103_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main eggdbus 0.6_1 exists in the ports tree
 :debug:main eggdbus 0.6_1  is the latest installed
 :debug:main eggdbus 0.6_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/eggdbus
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! eggdbus 0.6_1 >= eggdbus 0.6_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5-xml-parser 2.400.0_4 exists in the ports tree
 :debug:main p5-xml-parser 2.400.0_4  is the latest installed
 :debug:main no version of p5-xml-parser is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :msg:main --->  p5-xml-parser is replaced by p5.12-xml-parser
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -xml-parser
 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for livecheck.version
 :debug:main Re-registering default for configure.universal_args
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main ignoring versions, installing replacement port
 :debug:main Attempting ln -sf
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5
 -xml-parser/p5.12-xml-parser/work
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -xml-parser/work
 :debug:main changing euid/egid - current euid: 0 - current egid: 0
 :debug:main egid changed to: 500
 :debug:main euid changed to: 502
 :debug:main Starting logging for p5.12-xml-parser
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean orbit2 2.14.19_1 exists in the ports tree
 :debug:clean orbit2 2.14.19_1  is the latest installed
 :debug:clean orbit2 2.14.19_1  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orbit2
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean universal variant already exists, so not adding the default
 one
 :debug:clean No need to upgrade! orbit2 2.14.19_1 >= orbit2 2.14.19_1
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean libidl 0.8.14_2 exists in the ports tree
 :debug:clean libidl 0.8.14_2  is the latest installed
 :debug:clean libidl 0.8.14_2  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libidl
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean universal variant already exists, so not adding the default
 one
 :debug:clean No need to upgrade! libidl 0.8.14_2 >= libidl 0.8.14_2
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean curl-ca-bundle 7.27.0_0 exists in the ports tree
 :debug:clean curl-ca-bundle 7.27.0_0  is the latest installed
 :debug:clean curl-ca-bundle 7.27.0_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net
 /curl-ca-bundle
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean universal_variant is false, so not adding the default
 universal variant
 :debug:clean No need to upgrade! curl-ca-bundle 7.27.0_0 >= curl-ca-bundle
 7.27.0_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean libgnome-keyring 2.30.1_1 exists in the ports tree
 :debug:clean libgnome-keyring 2.30.1_1  is the latest installed
 :debug:clean libgnome-keyring 2.30.1_1  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /libgnome-keyring
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! libgnome-keyring 2.30.1_1 >= libgnome-
 keyring 2.30.1_1
 :debug:clean epoch: in tree: 1 installed: 1
 :debug:clean gnome-keyring 2.30.3_4 exists in the ports tree
 :debug:clean gnome-keyring 2.30.3_4  is the latest installed
 :debug:clean gnome-keyring 2.30.3_4  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /gnome-keyring
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! gnome-keyring 2.30.3_4 >= gnome-keyring
 2.30.3_4
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean gmake 3.82_0 exists in the ports tree
 :debug:clean gmake 3.82_0  is the latest installed
 :debug:clean gmake 3.82_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmake
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! gmake 3.82_0 >= gmake 3.82_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean icu 4.8.1_0 exists in the ports tree
 :debug:clean icu 4.8.1_0  is the latest installed
 :debug:clean icu 4.8.1_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean universal variant already exists, so not adding the default
 one
 :debug:clean No need to upgrade! icu 4.8.1_0 >= icu 4.8.1_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean libxslt 1.1.26_0 exists in the ports tree
 :debug:clean libxslt 1.1.26_0  is the latest installed
 :debug:clean libxslt 1.1.26_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxslt
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean enchant 1.6.0_1 exists in the ports tree
 :debug:clean enchant 1.6.0_1  is the latest installed
 :debug:clean enchant 1.6.0_1  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/enchant
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! enchant 1.6.0_1 >= enchant 1.6.0_1
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean aspell 0.60.6_4 exists in the ports tree
 :debug:clean aspell 0.60.6_4 +nonls is the latest installed
 :debug:clean aspell 0.60.6_4 +nonls is active
 :debug:clean Merging existing variants '+nonls' into variants
 :debug:clean new fully merged portvariants: nonls +
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/aspell
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean adding the default universal variant
 :debug:clean Executing variant nonls provides nonls
 :debug:clean No need to upgrade! aspell 0.60.6_4 >= aspell 0.60.6_4
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean texinfo 4.13_2 exists in the ports tree
 :debug:clean texinfo 4.13_2  is the latest installed
 :debug:clean texinfo 4.13_2  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/texinfo
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean hunspell 1.3.2_0 exists in the ports tree
 :debug:clean hunspell 1.3.2_0  is the latest installed
 :debug:clean hunspell 1.3.2_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/hunspell
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! hunspell 1.3.2_0 >= hunspell 1.3.2_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean xorg-libXt 1.1.3_0 exists in the ports tree
 :debug:clean xorg-libXt 1.1.3_0  is the latest installed
 :debug:clean xorg-libXt 1.1.3_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXt
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! xorg-libXt 1.1.3_0 >= xorg-libXt 1.1.3_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean xorg-libsm 1.2.1_0 exists in the ports tree
 :debug:clean xorg-libsm 1.2.1_0  is the latest installed
 :debug:clean xorg-libsm 1.2.1_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libsm
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean xorg-libice 1.0.8_0 exists in the ports tree
 :debug:clean xorg-libice 1.0.8_0  is the latest installed
 :debug:clean xorg-libice 1.0.8_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libice
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! xorg-libice 1.0.8_0 >= xorg-libice
 1.0.8_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean gst-plugins-base 0.10.36_2 exists in the ports tree
 :debug:clean gst-plugins-base 0.10.36_2  is the latest installed
 :debug:clean gst-plugins-base 0.10.36_2  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /gst-plugins-base
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean universal variant already exists, so not adding the default
 one
 :debug:clean No need to upgrade! gst-plugins-base 0.10.36_2 >= gst-
 plugins-base 0.10.36_2
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean gstreamer 0.10.36_2 exists in the ports tree
 :debug:clean gstreamer 0.10.36_2  is the latest installed
 :debug:clean gstreamer 0.10.36_2  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gstreamer
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean universal variant already exists, so not adding the default
 one
 :debug:clean No need to upgrade! gstreamer 0.10.36_2 >= gstreamer
 0.10.36_2
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean bison 2.6.2_0 exists in the ports tree
 :debug:clean bison 2.6.2_0  is the latest installed
 :debug:clean bison 2.6.2_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/bison
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! bison 2.6.2_0 >= bison 2.6.2_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean m4 1.4.16_0 exists in the ports tree
 :debug:clean m4 1.4.16_0  is the latest installed
 :debug:clean m4 1.4.16_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean flex 2.5.37_0 exists in the ports tree
 :debug:clean flex 2.5.37_0  is the latest installed
 :debug:clean flex 2.5.37_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/flex
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! flex 2.5.37_0 >= flex 2.5.37_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean gnome-vfs 2.24.4_1 exists in the ports tree
 :debug:clean gnome-vfs 2.24.4_1  is the latest installed
 :debug:clean gnome-vfs 2.24.4_1  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /gnome-vfs
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean universal variant already exists, so not adding the default
 one
 :debug:clean No need to upgrade! gnome-vfs 2.24.4_1 >= gnome-vfs 2.24.4_1
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean desktop-file-utils 0.15_1 exists in the ports tree
 :debug:clean desktop-file-utils 0.15_1  is the latest installed
 :debug:clean desktop-file-utils 0.15_1  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /desktop-file-utils
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! desktop-file-utils 0.15_1 >= desktop-
 file-utils 0.15_1
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean popt 1.16_0 exists in the ports tree
 :debug:clean popt 1.16_0  is the latest installed
 :debug:clean popt 1.16_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/popt
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! popt 1.16_0 >= popt 1.16_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean gnome-mime-data 2.18.0_3 exists in the ports tree
 :debug:clean gnome-mime-data 2.18.0_3  is the latest installed
 :debug:clean gnome-mime-data 2.18.0_3  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /gnome-mime-data
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean only one arch supported, so not adding the default universal
 variant
 :debug:clean No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-
 data 2.18.0_3
 :debug:clean epoch: in tree: 1 installed: 1
 :debug:clean libtheora 1.1.1_1 exists in the ports tree
 :debug:clean libtheora 1.1.1_1  is the latest installed
 :debug:clean libtheora 1.1.1_1  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libtheora
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! libtheora 1.1.1_1 >= libtheora 1.1.1_1
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean libvorbis 1.3.3_0 exists in the ports tree
 :debug:clean libvorbis 1.3.3_0  is the latest installed
 :debug:clean libvorbis 1.3.3_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/libvorbis
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean universal variant already exists, so not adding the default
 one
 :debug:clean No need to upgrade! libvorbis 1.3.3_0 >= libvorbis 1.3.3_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean libogg 1.3.0_1 exists in the ports tree
 :debug:clean libogg 1.3.0_1  is the latest installed
 :debug:clean libogg 1.3.0_1  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libogg
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! libogg 1.3.0_1 >= libogg 1.3.0_1
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean orc 0.4.16_0 exists in the ports tree
 :debug:clean orc 0.4.16_0  is the latest installed
 :debug:clean orc 0.4.16_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orc
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean universal variant already exists, so not adding the default
 one
 :debug:clean No need to upgrade! orc 0.4.16_0 >= orc 0.4.16_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean pkgconfig 0.27_0 exists in the ports tree
 :debug:clean pkgconfig 0.27_0  is the latest installed
 :debug:clean pkgconfig 0.27_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! pkgconfig 0.27_0 >= pkgconfig 0.27_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean intltool 0.50.2_0 exists in the ports tree
 :debug:clean intltool 0.50.2_0  is the latest installed
 :debug:clean intltool 0.50.2_0  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/intltool
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean only one arch supported, so not adding the default universal
 variant
 :debug:clean No need to upgrade! intltool 0.50.2_0 >= intltool 0.50.2_0
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean p5.12-getopt-long 2.380.0_3 exists in the ports tree
 :debug:clean p5.12-getopt-long 2.380.0_3  is the latest installed
 :debug:clean p5.12-getopt-long 2.380.0_3  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -getopt-long
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:clean Re-registering default for livecheck.version
 :debug:clean Re-registering default for configure.universal_args
 :debug:clean only one arch supported, so not adding the default universal
 variant
 :debug:clean No need to upgrade! p5.12-getopt-long 2.380.0_3 >= p5.12
 -getopt-long 2.380.0_3
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean p5.12-pathtools 3.330.0_3 exists in the ports tree
 :debug:clean p5.12-pathtools 3.330.0_3  is the latest installed
 :debug:clean p5.12-pathtools 3.330.0_3  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-pathtools
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:clean Re-registering default for livecheck.version
 :debug:clean Re-registering default for configure.universal_args
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! p5.12-pathtools 3.330.0_3 >=
 p5.12-pathtools 3.330.0_3
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean p5.12-scalar-list-utils 1.230.0_3 exists in the ports tree
 :debug:clean p5.12-scalar-list-utils 1.230.0_3  is the latest installed
 :debug:clean p5.12-scalar-list-utils 1.230.0_3  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -scalar-list-utils
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:clean Re-registering default for livecheck.version
 :debug:clean Re-registering default for configure.universal_args
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! p5.12-scalar-list-utils 1.230.0_3 >=
 p5.12-scalar-list-utils 1.230.0_3
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean libnotify 0.5.2_2 exists in the ports tree
 :debug:clean libnotify 0.5.2_2  is the latest installed
 :debug:clean libnotify 0.5.2_2  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libnotify
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean adding the default universal variant
 :debug:clean No need to upgrade! libnotify 0.5.2_2 >= libnotify 0.5.2_2
 :debug:clean epoch: in tree: 0 installed: 0
 :debug:clean vala 0.16.0_1 exists in the ports tree
 :debug:clean vala 0.16.0_1  is the latest installed
 :debug:clean vala 0.16.0_1  is active
 :debug:clean Merging existing variants '' into variants
 :debug:clean new fully merged portvariants:
 :debug:clean Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/vala
 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
 :debug:clean org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:clean org.macports.distfiles registered provides 'distfiles', a
 pre-existing procedure. Target override will not be provided
 :debug:clean adding the default universal variant
 :debug:clean Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:clean No need to upgrade! vala 0.16.0_1 >= vala 0.16.0_1
 :msg:clean --->  Computing dependencies for midori:info:clean
 .:debug:clean midori has no conflicts
 :debug:clean Searching for dependency: gtk2
 :debug:clean Found Dependency: receipt exists for gtk2
 :debug:clean Searching for dependency: glib2
 :debug:clean Found Dependency: receipt exists for glib2
 :debug:clean Searching for dependency: webkit-gtk
 :debug:clean Found Dependency: receipt exists for webkit-gtk
 :debug:clean Searching for dependency: libxml2
 :debug:clean Found Dependency: receipt exists for libxml2
 :debug:clean Searching for dependency: pkgconfig
 :debug:clean Found Dependency: receipt exists for pkgconfig
 :debug:clean Searching for dependency: intltool
 :debug:clean Found Dependency: receipt exists for intltool
 :debug:clean Searching for dependency: libnotify
 :debug:clean Found Dependency: receipt exists for libnotify
 :debug:clean Searching for dependency: vala
 :debug:clean Found Dependency: receipt exists for vala
 :msg:clean
 :debug:main Executing org.macports.main (midori)
 :debug:main changing euid/egid - current euid: 0 - current egid: 0
 :debug:main egid changed to: 500
 :debug:main euid changed to: 502
 :debug:main Skipping completed org.macports.archivefetch (midori)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.fetch (midori)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.checksum (midori)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.extract (midori)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.patch (midori)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.configure (midori)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:build build phase started at Sat Aug 18 10:25:16 CDT 2012
 :notice:build --->  Building midori
 :debug:build Executing org.macports.build (midori)
 :debug:build Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.4'
 :debug:build Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9"
 && /usr/bin/make -w all'
 :debug:build Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9"
 && /usr/bin/make -w all
 :info:build make: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9'
 :info:build Waf: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9/_build_'
 :info:build [ 60/115] cc_link: _build_/default/midori/main_2.o ->
 _build_/default/midori/midori
 :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: Undefined
 symbols:
 :info:build _webkit_web_view_get_selected_text
 :info:build collect2: ld returned 1 exit status
 :info:build Waf: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9/_build_'
 :info:build Build failed:  -> task failed (err #1):
 :info:build     {task: cc_link main_2.o -> midori}
 :info:build make: *** [all] Error 1
 :info:build make: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9'
 :info:build Command failed:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9"
 && /usr/bin/make -w all
 :info:build Exit code: 2
 :error:build org.macports.build for port midori returned: command
 execution failed
 :debug:build Error code: CHILDSTATUS 4753 2
 :debug:build Backtrace: command execution failed
     while executing
 "system -nice 0 $fullcmdstring"
     ("eval" body line 1)
     invoked from within
 "eval system $notty $nice \$fullcmdstring"
     invoked from within
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: targets not executed for midori:
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 :notice:build Please see the log file for port midori for details:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/main.log

-- 
Ticket URL: <https://trac.macports.org/ticket/35734>
MacPorts <http://www.macports.org/>
Ports system for Mac OS