[MacPorts] #35734: midori: Undefined symbols: _webkit_web_view_get_selected_text (was: installing xfce failed due to failure to build midori)

Sat Aug 18 15:51:49 PDT 2012

#35734: midori: Undefined symbols: _webkit_web_view_get_selected_text
-----------------------------------+----------------------------------------
 Reporter:  atlasfallen@…          |       Owner:  afb@…           
     Type:  defect                 |      Status:  new             
 Priority:  Normal                 |   Milestone:                  
Component:  ports                  |     Version:  2.1.2           
 Keywords:                         |        Port:  midori          
-----------------------------------+----------------------------------------
Changes (by ryandesign@…):

  * owner:  macports-tickets@… => afb@…

Old description:

> "org.macports.build for port midori returned: command execution failed"
> below is the content of the log file for attempting to install midori
> alone.
> My goal is to install the xfce port, midori is just the obstacle along
> the way
> I'm open to suggestion on getting midori to build, or a work-a-round
> resulting in successful port installation of xfce minus midori.
> Thanks!
> system:
> ibook g3 900mhz 640mb ram
> OS X 10.4.11
> xcode 2.5
> macports built from source a couple days ago
>

> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gtk2 2.24.11_0 exists in the ports tree
> :debug:main gtk2 2.24.11_0 +x11 is the latest installed
> :debug:main gtk2 2.24.11_0 +x11 is active
> :debug:main Merging existing variants '+x11' into variants
> :debug:main new fully merged portvariants: x11 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant x11 provides x11
> :debug:main No need to upgrade! gtk2 2.24.11_0 >= gtk2 2.24.11_0
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main atk 2.2.0_2 exists in the ports tree
> :debug:main atk 2.2.0_2  is the latest installed
> :debug:main atk 2.2.0_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! atk 2.2.0_2 >= atk 2.2.0_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main glib2 2.32.4_0 exists in the ports tree
> :debug:main glib2 2.32.4_0  is the latest installed
> :debug:main glib2 2.32.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! glib2 2.32.4_0 >= glib2 2.32.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2  is the latest installed
> :debug:main gettext 0.18.1.1_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.14_0 exists in the ports tree
> :debug:main libiconv 1.14_0  is the latest installed
> :debug:main libiconv 1.14_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.9_1 exists in the ports tree
> :debug:main ncurses 5.9_1  is the latest installed
> :debug:main ncurses 5.9_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.1.0_0 exists in the ports tree
> :debug:main expat 2.1.0_0  is the latest installed
> :debug:main expat 2.1.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.7_0 exists in the ports tree
> :debug:main zlib 1.2.7_0  is the latest installed
> :debug:main zlib 1.2.7_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libffi 3.0.11_0 exists in the ports tree
> :debug:main libffi 3.0.11_0  is the latest installed
> :debug:main libffi 3.0.11_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libffi 3.0.11_0 >= libffi 3.0.11_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5 5.12.4_0 exists in the ports tree
> :debug:main perl5 5.12.4_0 +perl5_12 is the latest installed
> :debug:main perl5 5.12.4_0 +perl5_12 is active
> :debug:main Merging existing variants '+perl5_12' into variants
> :debug:main new fully merged portvariants: perl5_12 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Executing variant perl5_12 provides perl5_12
> :debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5.12 5.12.4_1 exists in the ports tree
> :debug:main perl5.12 5.12.4_1  is the latest installed
> :debug:main perl5.12 5.12.4_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gdbm 1.10_2 exists in the ports tree
> :debug:main gdbm 1.10_2  is the latest installed
> :debug:main gdbm 1.10_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main python27 2.7.3_0 exists in the ports tree
> :debug:main python27 2.7.3_0  is the latest installed
> :debug:main python27 2.7.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main openssl 1.0.1c_0 exists in the ports tree
> :debug:main openssl 1.0.1c_0  is the latest installed
> :debug:main openssl 1.0.1c_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main sqlite3 3.7.13_0 exists in the ports tree
> :debug:main sqlite3 3.7.13_0  is the latest installed
> :debug:main sqlite3 3.7.13_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! sqlite3 3.7.13_0 >= sqlite3 3.7.13_0
> :debug:main epoch: in tree: 20090923 installed: 20090923
> :debug:main libedit 20120601-3.0_0 exists in the ports tree
> :debug:main libedit 20120601-3.0_0  is the latest installed
> :debug:main libedit 20120601-3.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit
> 20120601-3.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main db46 4.6.21_6 exists in the ports tree
> :debug:main db46 4.6.21_6 +java is the latest installed
> :debug:main db46 4.6.21_6 +java is active
> :debug:main Merging existing variants '+java' into variants
> :debug:main new fully merged portvariants: java +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant java provides java
> :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main bzip2 1.0.6_0 exists in the ports tree
> :debug:main bzip2 1.0.6_0  is the latest installed
> :debug:main bzip2 1.0.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python_select 0.3_1 exists in the ports tree
> :debug:main python_select 0.3_1  is the latest installed
> :debug:main python_select 0.3_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! python_select 0.3_1 >= python_select
> 0.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gobject-introspection 1.32.1_3 exists in the ports tree
> :debug:main gobject-introspection 1.32.1_3  is the latest installed
> :debug:main gobject-introspection 1.32.1_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /gobject-introspection
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gobject-introspection 1.32.1_3 >=
> gobject-introspection 1.32.1_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main cairo 1.12.2_0 exists in the ports tree
> :debug:main cairo 1.12.2_0 +x11 is the latest installed
> :debug:main cairo 1.12.2_0 +x11 is active
> :debug:main Merging existing variants '+x11' into variants
> :debug:main new fully merged portvariants: x11 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant x11 provides x11
> :debug:main No need to upgrade! cairo 1.12.2_0 >= cairo 1.12.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpixman 0.26.2_0 exists in the ports tree
> :debug:main libpixman 0.26.2_0  is the latest installed
> :debug:main libpixman 0.26.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libpixman 0.26.2_0 >= libpixman 0.26.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main fontconfig 2.9.0_1 exists in the ports tree
> :debug:main fontconfig 2.9.0_1  is the latest installed
> :debug:main fontconfig 2.9.0_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main freetype 2.4.10_0 exists in the ports tree
> :debug:main freetype 2.4.10_0  is the latest installed
> :debug:main freetype 2.4.10_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! freetype 2.4.10_0 >= freetype 2.4.10_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpng 1.4.12_0 exists in the ports tree
> :debug:main libpng 1.4.12_0  is the latest installed
> :debug:main libpng 1.4.12_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libpng 1.4.12_0 >= libpng 1.4.12_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xrender 0.9.7_0 exists in the ports tree
> :debug:main xrender 0.9.7_0  is the latest installed
> :debug:main xrender 0.9.7_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libX11 1.5.0_0 exists in the ports tree
> :debug:main xorg-libX11 1.5.0_0  is the latest installed
> :debug:main xorg-libX11 1.5.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libX11
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11
> 1.5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree
> :debug:main xorg-libXdmcp 1.1.1_0  is the latest installed
> :debug:main xorg-libXdmcp 1.1.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXdmcp
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp
> 1.1.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXau 1.0.7_0 exists in the ports tree
> :debug:main xorg-libXau 1.0.7_0  is the latest installed
> :debug:main xorg-libXau 1.0.7_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXau
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau
> 1.0.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xproto 7.0.23_0 exists in the ports tree
> :debug:main xorg-xproto 7.0.23_0  is the latest installed
> :debug:main xorg-xproto 7.0.23_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto
> 7.0.23_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libxcb 1.8.1_2 exists in the ports tree
> :debug:main xorg-libxcb 1.8.1_2 +python27 is the latest installed
> :debug:main xorg-libxcb 1.8.1_2 +python27 is active
> :debug:main Merging existing variants '+python27' into variants
> :debug:main new fully merged portvariants: python27 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libxcb
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant python27 provides python27
> :debug:main No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb
> 1.8.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xcb-proto 1.7.1_0 exists in the ports tree
> :debug:main xorg-xcb-proto 1.7.1_0 +python27 is the latest installed
> :debug:main xorg-xcb-proto 1.7.1_0 +python27 is active
> :debug:main Merging existing variants '+python27' into variants
> :debug:main new fully merged portvariants: python27 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xcb-proto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Executing variant python27 provides python27
> :debug:main No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto
> 1.7.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libxml2 2.7.8_0 exists in the ports tree
> :debug:main libxml2 2.7.8_0  is the latest installed
> :debug:main libxml2 2.7.8_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
> :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
> :debug:main xorg-libpthread-stubs 0.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libpthread-stubs
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
> libpthread-stubs 0.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-kbproto 1.0.6_0 exists in the ports tree
> :debug:main xorg-kbproto 1.0.6_0  is the latest installed
> :debug:main xorg-kbproto 1.0.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-kbproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto
> 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
> :debug:main xorg-renderproto 0.11.1_0  is the latest installed
> :debug:main xorg-renderproto 0.11.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-renderproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
> renderproto 0.11.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xcb-util 0.3.9_0 exists in the ports tree
> :debug:main xorg-xcb-util 0.3.9_0  is the latest installed
> :debug:main xorg-xcb-util 0.3.9_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xcb-util
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util
> 0.3.9_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main pango 1.30.1_1 exists in the ports tree
> :debug:main pango 1.30.1_1 +x11 is the latest installed
> :debug:main pango 1.30.1_1 +x11 is active
> :debug:main Merging existing variants '+x11' into variants
> :debug:main new fully merged portvariants: x11 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Executing variant x11 provides x11
> :debug:main No need to upgrade! pango 1.30.1_1 >= pango 1.30.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main Xft2 2.3.1_0 exists in the ports tree
> :debug:main Xft2 2.3.1_0  is the latest installed
> :debug:main Xft2 2.3.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! Xft2 2.3.1_0 >= Xft2 2.3.1_0
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main gdk-pixbuf2 2.26.2_0 exists in the ports tree
> :debug:main gdk-pixbuf2 2.26.2_0  is the latest installed
> :debug:main gdk-pixbuf2 2.26.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics
> /gdk-pixbuf2
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gdk-pixbuf2 2.26.2_0 >= gdk-pixbuf2
> 2.26.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jasper 1.900.1_9 exists in the ports tree
> :debug:main jasper 1.900.1_9  is the latest installed
> :debug:main jasper 1.900.1_9  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jpeg 8d_0 exists in the ports tree
> :debug:main jpeg 8d_0  is the latest installed
> :debug:main jpeg 8d_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main tiff 3.9.5_0 exists in the ports tree
> :debug:main tiff 3.9.5_0  is the latest installed
> :debug:main tiff 3.9.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXi 1.6.1_0 exists in the ports tree
> :debug:main xorg-libXi 1.6.1_0  is the latest installed
> :debug:main xorg-libXi 1.6.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXi
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXi 1.6.1_0 >= xorg-libXi 1.6.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXext 1.3.1_0 exists in the ports tree
> :debug:main xorg-libXext 1.3.1_0  is the latest installed
> :debug:main xorg-libXext 1.3.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXext
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext
> 1.3.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xextproto 7.2.1_0 exists in the ports tree
> :debug:main xorg-xextproto 7.2.1_0  is the latest installed
> :debug:main xorg-xextproto 7.2.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xextproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto
> 7.2.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-inputproto 2.2_0 exists in the ports tree
> :debug:main xorg-inputproto 2.2_0  is the latest installed
> :debug:main xorg-inputproto 2.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-inputproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-inputproto 2.2_0 >= xorg-inputproto
> 2.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree
> :debug:main xorg-libXrandr 1.3.2_0  is the latest installed
> :debug:main xorg-libXrandr 1.3.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXrandr
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr
> 1.3.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-randrproto 1.4.0_0 exists in the ports tree
> :debug:main xorg-randrproto 1.4.0_0  is the latest installed
> :debug:main xorg-randrproto 1.4.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-randrproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-randrproto 1.4.0_0 >= xorg-
> randrproto 1.4.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXcursor 1.1.13_0 exists in the ports tree
> :debug:main xorg-libXcursor 1.1.13_0  is the latest installed
> :debug:main xorg-libXcursor 1.1.13_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXcursor
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXcursor 1.1.13_0 >= xorg-
> libXcursor 1.1.13_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXfixes 5.0_0 exists in the ports tree
> :debug:main xorg-libXfixes 5.0_0  is the latest installed
> :debug:main xorg-libXfixes 5.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXfixes
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes
> 5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-fixesproto 5.0_0 exists in the ports tree
> :debug:main xorg-fixesproto 5.0_0  is the latest installed
> :debug:main xorg-fixesproto 5.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-fixesproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto
> 5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXinerama 1.1.2_0 exists in the ports tree
> :debug:main xorg-libXinerama 1.1.2_0  is the latest installed
> :debug:main xorg-libXinerama 1.1.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXinerama
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXinerama 1.1.2_0 >= xorg-
> libXinerama 1.1.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
> :debug:main xorg-xineramaproto 1.2.1_0  is the latest installed
> :debug:main xorg-xineramaproto 1.2.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xineramaproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-
> xineramaproto 1.2.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
> :debug:main xorg-libXdamage 1.1.3_0  is the latest installed
> :debug:main xorg-libXdamage 1.1.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXdamage
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-
> libXdamage 1.1.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
> :debug:main xorg-damageproto 1.2.1_0  is the latest installed
> :debug:main xorg-damageproto 1.2.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-damageproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-
> damageproto 1.2.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
> :debug:main xorg-libXcomposite 0.4.3_0  is the latest installed
> :debug:main xorg-libXcomposite 0.4.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXcomposite
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
> libXcomposite 0.4.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
> :debug:main xorg-compositeproto 0.4.2_0  is the latest installed
> :debug:main xorg-compositeproto 0.4.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-compositeproto
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
> compositeproto 0.4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main shared-mime-info 1.0_0 exists in the ports tree
> :debug:main shared-mime-info 1.0_0  is the latest installed
> :debug:main shared-mime-info 1.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
> /shared-mime-info
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-
> info 1.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
> :debug:main hicolor-icon-theme 0.12_0  is the latest installed
> :debug:main hicolor-icon-theme 0.12_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /hicolor-icon-theme
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-
> icon-theme 0.12_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main webkit-gtk 1.6.3_4 exists in the ports tree
> :debug:main webkit-gtk 1.6.3_4 +svg+video is the latest installed
> :debug:main webkit-gtk 1.6.3_4 +svg+video is active
> :debug:main Merging existing variants '+svg+video' into variants
> :debug:main new fully merged portvariants: svg + video +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/www
> /webkit-gtk
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant video provides video
> :debug:main Executing variant svg provides svg
> :debug:main No need to upgrade! webkit-gtk 1.6.3_4 >= webkit-gtk 1.6.3_4
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libsoup 2.38.1_0 exists in the ports tree
> :debug:main libsoup 2.38.1_0  is the latest installed
> :debug:main libsoup 2.38.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/libsoup
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libsoup 2.38.1_0 >= libsoup 2.38.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main glib-networking 2.28.7_4 exists in the ports tree
> :debug:main glib-networking 2.28.7_4  is the latest installed
> :debug:main glib-networking 2.28.7_4  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /glib-networking
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! glib-networking 2.28.7_4 >= glib-
> networking 2.28.7_4
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gnutls 2.12.19_0 exists in the ports tree
> :debug:main gnutls 2.12.19_0  is the latest installed
> :debug:main gnutls 2.12.19_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gnutls
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gnutls 2.12.19_0 >= gnutls 2.12.19_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libgcrypt 1.5.0_0 exists in the ports tree
> :debug:main libgcrypt 1.5.0_0  is the latest installed
> :debug:main libgcrypt 1.5.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgcrypt
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libgcrypt 1.5.0_0 >= libgcrypt 1.5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libgpg-error 1.10_0 exists in the ports tree
> :debug:main libgpg-error 1.10_0  is the latest installed
> :debug:main libgpg-error 1.10_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
> /libgpg-error
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error
> 1.10_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libtasn1 2.11_0 exists in the ports tree
> :debug:main libtasn1 2.11_0  is the latest installed
> :debug:main libtasn1 2.11_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtasn1
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libtasn1 2.11_0 >= libtasn1 2.11_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main lzo2 2.05_1 exists in the ports tree
> :debug:main lzo2 2.05_1  is the latest installed
> :debug:main lzo2 2.05_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! lzo2 2.05_1 >= lzo2 2.05_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main readline 6.2.000_0 exists in the ports tree
> :debug:main readline 6.2.000_0  is the latest installed
> :debug:main readline 6.2.000_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main libproxy 0.4.7_0 exists in the ports tree
> :debug:main libproxy 0.4.7_0 +python27 is the latest installed
> :debug:main libproxy 0.4.7_0 +python27 is active
> :debug:main Merging existing variants '+python27' into variants
> :debug:main new fully merged portvariants: python27 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/libproxy
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant python27 provides python27
> :debug:main No need to upgrade! libproxy 0.4.7_0 >= libproxy 0.4.7_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main gconf 2.28.1_3 exists in the ports tree
> :debug:main gconf 2.28.1_3  is the latest installed
> :debug:main gconf 2.28.1_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gconf
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gconf 2.28.1_3 >= gconf 2.28.1_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main dbus-glib 0.100_0 exists in the ports tree
> :debug:main dbus-glib 0.100_0  is the latest installed
> :debug:main dbus-glib 0.100_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
> /dbus-glib
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! dbus-glib 0.100_0 >= dbus-glib 0.100_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main dbus 1.4.20_1 exists in the ports tree
> :debug:main dbus 1.4.20_1 +startupitem is the latest installed
> :debug:main dbus 1.4.20_1 +startupitem is active
> :debug:main Merging existing variants '+startupitem' into variants
> :debug:main new fully merged portvariants: startupitem +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant startupitem provides startupitem
> :debug:main No need to upgrade! dbus 1.4.20_1 >= dbus 1.4.20_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main policykit 0.103_1 exists in the ports tree
> :debug:main policykit 0.103_1  is the latest installed
> :debug:main policykit 0.103_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security/policykit
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! policykit 0.103_1 >= policykit 0.103_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main eggdbus 0.6_1 exists in the ports tree
> :debug:main eggdbus 0.6_1  is the latest installed
> :debug:main eggdbus 0.6_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/eggdbus
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! eggdbus 0.6_1 >= eggdbus 0.6_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main p5-xml-parser 2.400.0_4 exists in the ports tree
> :debug:main p5-xml-parser 2.400.0_4  is the latest installed
> :debug:main no version of p5-xml-parser is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :msg:main --->  p5-xml-parser is replaced by p5.12-xml-parser
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
> -xml-parser
> :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:main Re-registering default for livecheck.version
> :debug:main Re-registering default for configure.universal_args
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main ignoring versions, installing replacement port
> :debug:main Attempting ln -sf
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5
> -xml-parser/p5.12-xml-parser/work
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
> -xml-parser/work
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 500
> :debug:main euid changed to: 502
> :debug:main Starting logging for p5.12-xml-parser
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean orbit2 2.14.19_1 exists in the ports tree
> :debug:clean orbit2 2.14.19_1  is the latest installed
> :debug:clean orbit2 2.14.19_1  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orbit2
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean No need to upgrade! orbit2 2.14.19_1 >= orbit2 2.14.19_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libidl 0.8.14_2 exists in the ports tree
> :debug:clean libidl 0.8.14_2  is the latest installed
> :debug:clean libidl 0.8.14_2  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libidl
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean No need to upgrade! libidl 0.8.14_2 >= libidl 0.8.14_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean curl-ca-bundle 7.27.0_0 exists in the ports tree
> :debug:clean curl-ca-bundle 7.27.0_0  is the latest installed
> :debug:clean curl-ca-bundle 7.27.0_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net
> /curl-ca-bundle
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean universal_variant is false, so not adding the default
> universal variant
> :debug:clean No need to upgrade! curl-ca-bundle 7.27.0_0 >= curl-ca-
> bundle 7.27.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libgnome-keyring 2.30.1_1 exists in the ports tree
> :debug:clean libgnome-keyring 2.30.1_1  is the latest installed
> :debug:clean libgnome-keyring 2.30.1_1  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /libgnome-keyring
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! libgnome-keyring 2.30.1_1 >= libgnome-
> keyring 2.30.1_1
> :debug:clean epoch: in tree: 1 installed: 1
> :debug:clean gnome-keyring 2.30.3_4 exists in the ports tree
> :debug:clean gnome-keyring 2.30.3_4  is the latest installed
> :debug:clean gnome-keyring 2.30.3_4  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /gnome-keyring
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! gnome-keyring 2.30.3_4 >= gnome-keyring
> 2.30.3_4
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean gmake 3.82_0 exists in the ports tree
> :debug:clean gmake 3.82_0  is the latest installed
> :debug:clean gmake 3.82_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmake
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! gmake 3.82_0 >= gmake 3.82_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean icu 4.8.1_0 exists in the ports tree
> :debug:clean icu 4.8.1_0  is the latest installed
> :debug:clean icu 4.8.1_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean No need to upgrade! icu 4.8.1_0 >= icu 4.8.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libxslt 1.1.26_0 exists in the ports tree
> :debug:clean libxslt 1.1.26_0  is the latest installed
> :debug:clean libxslt 1.1.26_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxslt
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean enchant 1.6.0_1 exists in the ports tree
> :debug:clean enchant 1.6.0_1  is the latest installed
> :debug:clean enchant 1.6.0_1  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/enchant
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! enchant 1.6.0_1 >= enchant 1.6.0_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean aspell 0.60.6_4 exists in the ports tree
> :debug:clean aspell 0.60.6_4 +nonls is the latest installed
> :debug:clean aspell 0.60.6_4 +nonls is active
> :debug:clean Merging existing variants '+nonls' into variants
> :debug:clean new fully merged portvariants: nonls +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/aspell
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean adding the default universal variant
> :debug:clean Executing variant nonls provides nonls
> :debug:clean No need to upgrade! aspell 0.60.6_4 >= aspell 0.60.6_4
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean texinfo 4.13_2 exists in the ports tree
> :debug:clean texinfo 4.13_2  is the latest installed
> :debug:clean texinfo 4.13_2  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/texinfo
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean hunspell 1.3.2_0 exists in the ports tree
> :debug:clean hunspell 1.3.2_0  is the latest installed
> :debug:clean hunspell 1.3.2_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/hunspell
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! hunspell 1.3.2_0 >= hunspell 1.3.2_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libXt 1.1.3_0 exists in the ports tree
> :debug:clean xorg-libXt 1.1.3_0  is the latest installed
> :debug:clean xorg-libXt 1.1.3_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXt
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! xorg-libXt 1.1.3_0 >= xorg-libXt 1.1.3_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libsm 1.2.1_0 exists in the ports tree
> :debug:clean xorg-libsm 1.2.1_0  is the latest installed
> :debug:clean xorg-libsm 1.2.1_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libsm
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libice 1.0.8_0 exists in the ports tree
> :debug:clean xorg-libice 1.0.8_0  is the latest installed
> :debug:clean xorg-libice 1.0.8_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libice
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! xorg-libice 1.0.8_0 >= xorg-libice
> 1.0.8_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean gst-plugins-base 0.10.36_2 exists in the ports tree
> :debug:clean gst-plugins-base 0.10.36_2  is the latest installed
> :debug:clean gst-plugins-base 0.10.36_2  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /gst-plugins-base
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean No need to upgrade! gst-plugins-base 0.10.36_2 >= gst-
> plugins-base 0.10.36_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean gstreamer 0.10.36_2 exists in the ports tree
> :debug:clean gstreamer 0.10.36_2  is the latest installed
> :debug:clean gstreamer 0.10.36_2  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gstreamer
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean No need to upgrade! gstreamer 0.10.36_2 >= gstreamer
> 0.10.36_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean bison 2.6.2_0 exists in the ports tree
> :debug:clean bison 2.6.2_0  is the latest installed
> :debug:clean bison 2.6.2_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/bison
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! bison 2.6.2_0 >= bison 2.6.2_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean m4 1.4.16_0 exists in the ports tree
> :debug:clean m4 1.4.16_0  is the latest installed
> :debug:clean m4 1.4.16_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean flex 2.5.37_0 exists in the ports tree
> :debug:clean flex 2.5.37_0  is the latest installed
> :debug:clean flex 2.5.37_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/flex
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! flex 2.5.37_0 >= flex 2.5.37_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean gnome-vfs 2.24.4_1 exists in the ports tree
> :debug:clean gnome-vfs 2.24.4_1  is the latest installed
> :debug:clean gnome-vfs 2.24.4_1  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /gnome-vfs
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean No need to upgrade! gnome-vfs 2.24.4_1 >= gnome-vfs 2.24.4_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean desktop-file-utils 0.15_1 exists in the ports tree
> :debug:clean desktop-file-utils 0.15_1  is the latest installed
> :debug:clean desktop-file-utils 0.15_1  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /desktop-file-utils
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! desktop-file-utils 0.15_1 >= desktop-
> file-utils 0.15_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean popt 1.16_0 exists in the ports tree
> :debug:clean popt 1.16_0  is the latest installed
> :debug:clean popt 1.16_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/popt
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! popt 1.16_0 >= popt 1.16_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean gnome-mime-data 2.18.0_3 exists in the ports tree
> :debug:clean gnome-mime-data 2.18.0_3  is the latest installed
> :debug:clean gnome-mime-data 2.18.0_3  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /gnome-mime-data
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-
> data 2.18.0_3
> :debug:clean epoch: in tree: 1 installed: 1
> :debug:clean libtheora 1.1.1_1 exists in the ports tree
> :debug:clean libtheora 1.1.1_1  is the latest installed
> :debug:clean libtheora 1.1.1_1  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libtheora
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! libtheora 1.1.1_1 >= libtheora 1.1.1_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libvorbis 1.3.3_0 exists in the ports tree
> :debug:clean libvorbis 1.3.3_0  is the latest installed
> :debug:clean libvorbis 1.3.3_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/libvorbis
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean No need to upgrade! libvorbis 1.3.3_0 >= libvorbis 1.3.3_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libogg 1.3.0_1 exists in the ports tree
> :debug:clean libogg 1.3.0_1  is the latest installed
> :debug:clean libogg 1.3.0_1  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libogg
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! libogg 1.3.0_1 >= libogg 1.3.0_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean orc 0.4.16_0 exists in the ports tree
> :debug:clean orc 0.4.16_0  is the latest installed
> :debug:clean orc 0.4.16_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orc
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean No need to upgrade! orc 0.4.16_0 >= orc 0.4.16_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean pkgconfig 0.27_0 exists in the ports tree
> :debug:clean pkgconfig 0.27_0  is the latest installed
> :debug:clean pkgconfig 0.27_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! pkgconfig 0.27_0 >= pkgconfig 0.27_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean intltool 0.50.2_0 exists in the ports tree
> :debug:clean intltool 0.50.2_0  is the latest installed
> :debug:clean intltool 0.50.2_0  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/intltool
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean No need to upgrade! intltool 0.50.2_0 >= intltool 0.50.2_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean p5.12-getopt-long 2.380.0_3 exists in the ports tree
> :debug:clean p5.12-getopt-long 2.380.0_3  is the latest installed
> :debug:clean p5.12-getopt-long 2.380.0_3  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
> -getopt-long
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:clean Re-registering default for livecheck.version
> :debug:clean Re-registering default for configure.universal_args
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean No need to upgrade! p5.12-getopt-long 2.380.0_3 >= p5.12
> -getopt-long 2.380.0_3
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean p5.12-pathtools 3.330.0_3 exists in the ports tree
> :debug:clean p5.12-pathtools 3.330.0_3  is the latest installed
> :debug:clean p5.12-pathtools 3.330.0_3  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-pathtools
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:clean Re-registering default for livecheck.version
> :debug:clean Re-registering default for configure.universal_args
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! p5.12-pathtools 3.330.0_3 >=
> p5.12-pathtools 3.330.0_3
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean p5.12-scalar-list-utils 1.230.0_3 exists in the ports tree
> :debug:clean p5.12-scalar-list-utils 1.230.0_3  is the latest installed
> :debug:clean p5.12-scalar-list-utils 1.230.0_3  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
> -scalar-list-utils
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:clean Re-registering default for livecheck.version
> :debug:clean Re-registering default for configure.universal_args
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! p5.12-scalar-list-utils 1.230.0_3 >=
> p5.12-scalar-list-utils 1.230.0_3
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libnotify 0.5.2_2 exists in the ports tree
> :debug:clean libnotify 0.5.2_2  is the latest installed
> :debug:clean libnotify 0.5.2_2  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libnotify
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean adding the default universal variant
> :debug:clean No need to upgrade! libnotify 0.5.2_2 >= libnotify 0.5.2_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean vala 0.16.0_1 exists in the ports tree
> :debug:clean vala 0.16.0_1  is the latest installed
> :debug:clean vala 0.16.0_1  is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/vala
> :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean No need to upgrade! vala 0.16.0_1 >= vala 0.16.0_1
> :msg:clean --->  Computing dependencies for midori:info:clean
> .:debug:clean midori has no conflicts
> :debug:clean Searching for dependency: gtk2
> :debug:clean Found Dependency: receipt exists for gtk2
> :debug:clean Searching for dependency: glib2
> :debug:clean Found Dependency: receipt exists for glib2
> :debug:clean Searching for dependency: webkit-gtk
> :debug:clean Found Dependency: receipt exists for webkit-gtk
> :debug:clean Searching for dependency: libxml2
> :debug:clean Found Dependency: receipt exists for libxml2
> :debug:clean Searching for dependency: pkgconfig
> :debug:clean Found Dependency: receipt exists for pkgconfig
> :debug:clean Searching for dependency: intltool
> :debug:clean Found Dependency: receipt exists for intltool
> :debug:clean Searching for dependency: libnotify
> :debug:clean Found Dependency: receipt exists for libnotify
> :debug:clean Searching for dependency: vala
> :debug:clean Found Dependency: receipt exists for vala
> :msg:clean
> :debug:main Executing org.macports.main (midori)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 500
> :debug:main euid changed to: 502
> :debug:main Skipping completed org.macports.archivefetch (midori)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.fetch (midori)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.checksum (midori)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.extract (midori)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.patch (midori)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.configure (midori)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:build build phase started at Sat Aug 18 10:25:16 CDT 2012
> :notice:build --->  Building midori
> :debug:build Executing org.macports.build (midori)
> :debug:build Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.4'
> :debug:build Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9"
> && /usr/bin/make -w all'
> :debug:build Executing command line:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9"
> && /usr/bin/make -w all
> :info:build make: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9'
> :info:build Waf: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9/_build_'
> :info:build [ 60/115] cc_link: _build_/default/midori/main_2.o ->
> _build_/default/midori/midori
> :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: Undefined
> symbols:
> :info:build _webkit_web_view_get_selected_text
> :info:build collect2: ld returned 1 exit status
> :info:build Waf: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9/_build_'
> :info:build Build failed:  -> task failed (err #1):
> :info:build     {task: cc_link main_2.o -> midori}
> :info:build make: *** [all] Error 1
> :info:build make: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9'
> :info:build Command failed:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9"
> && /usr/bin/make -w all
> :info:build Exit code: 2
> :error:build org.macports.build for port midori returned: command
> execution failed
> :debug:build Error code: CHILDSTATUS 4753 2
> :debug:build Backtrace: command execution failed
>     while executing
> "system -nice 0 $fullcmdstring"
>     ("eval" body line 1)
>     invoked from within
> "eval system $notty $nice \$fullcmdstring"
>     invoked from within
> "command_exec build"
>     (procedure "portbuild::build_main" line 8)
>     invoked from within
> "$procedure $targetname"
> :info:build Warning: targets not executed for midori:
> org.macports.activate org.macports.build org.macports.destroot
> org.macports.install
> :notice:build Please see the log file for port midori for details:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/main.log

New description:

 "org.macports.build for port midori returned: command execution failed"
 [[br]]
 below is the content of the log file for attempting to install midori
 alone. [[br]]
 My goal is to install the xfce port, midori is just the obstacle along the
 way [[br]]
 I'm open to suggestion on getting midori to build, or a work-a-round
 resulting in successful port installation of xfce minus midori. [[br]]
 Thanks! [[br]]
 system: [[br]]
 ibook g3 900mhz 640mb ram [[br]]
 OS X 10.4.11 [[br]]
 xcode 2.5 [[br]]
 macports built from source a couple days ago

 (log contents removed by admin)

--

Comment:

 Remember to use WikiFormatting when writing in Trac.

 Since this was not a clean build, please "sudo port clean midori", then
 try again, and attach the new main.log if it fails again.

-- 
Ticket URL: <https://trac.macports.org/ticket/35734#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS