[MacPorts] #33107: avr-gcc: update to 4.6.2

[MacPorts]

#33107: avr-gcc: update to 4.6.2
---------------------------------------+------------------------------------
 Reporter:  marc.sowen@…               |       Owner:  titus@…           
     Type:  update                     |      Status:  assigned          
 Priority:  Normal                     |   Milestone:                    
Component:  ports                      |     Version:                    
 Keywords:  haspatch                   |        Port:  avr-gcc           
---------------------------------------+------------------------------------

Comment(by marc.sowen@…):

 Ok, I have installed avr-binutils-2.22 from #33201 and your new avr-
 gcc-4.6.2 and after that avr-libc 1.8.0 from trunk. Currently I seem to be
 unable to link:

 $:~/Downloads/LUFA-111009/Projects/AVRISP-MKII$ make


 -------- begin --------
 avr-gcc (GCC) 4.6.2
 Copyright (C) 2011 Free Software Foundation, Inc.
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
 PURPOSE.


 Linking: AVRISP-MKII.elf
 avr-gcc -mmcu=at90usb162 -I. -gdwarf-2 -DF_CPU=16000000UL
 -DF_USB=16000000UL -DBOARD=BOARD_USBTINYMKII -DARCH=ARCH_AVR8 -D
 USB_DEVICE_ONLY -D DEVICE_STATE_AS_GPIOR=0 -D ORDERED_EP_CONFIG -D
 FIXED_CONTROL_ENDPOINT_SIZE=16 -D FIXED_NUM_CONFIGURATIONS=1 -D
 USE_FLASH_DESCRIPTORS -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED |
 USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -D NO_INTERNAL_SERIAL -D
 NO_DEVICE_REMOTE_WAKEUP -D NO_DEVICE_SELF_POWER -D AUX_LINE_PORT=PORTB -D
 AUX_LINE_PIN=PINB -D AUX_LINE_DDR=DDRB -D AUX_LINE_MASK="(1 << 4)" -D
 ENABLE_ISP_PROTOCOL -D ENABLE_XPROG_PROTOCOL -D VTARGET_ADC_CHANNEL=2 -D
 VTARGET_REF_VOLTS=5 -D VTARGET_SCALE_FACTOR=1 -Os -funsigned-char
 -funsigned-bitfields -ffunction-sections -fno-inline-small-functions
 -fpack-struct -fshort-enums -fno-strict-aliasing -fno-split-wide-types
 -Wall -Wstrict-prototypes -Wa,-adhlns=AVRISP-MKII.o -I../../ -std=c99 -MMD
 -MP -MF .dep/AVRISP-MKII.elf.d AVRISP-MKII.o Descriptors.o
 Lib/V2Protocol.o Lib/V2ProtocolParams.o Lib/ISP/ISPProtocol.o
 Lib/ISP/ISPTarget.o Lib/XPROG/XPROGProtocol.o Lib/XPROG/XPROGTarget.o
 Lib/XPROG/XMEGANVM.o Lib/XPROG/TINYNVM.o
 ../../LUFA/Drivers/USB/Core/AVR8/Device_AVR8.o
 ../../LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.o
 ../../LUFA/Drivers/USB/Core/AVR8/Host_AVR8.o
 ../../LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.o
 ../../LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.o
 ../../LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.o
 ../../LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.o
 ../../LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.o
 ../../LUFA/Drivers/USB/Core/ConfigDescriptor.o
 ../../LUFA/Drivers/USB/Core/DeviceStandardReq.o
 ../../LUFA/Drivers/USB/Core/Events.o
 ../../LUFA/Drivers/USB/Core/HostStandardReq.o
 ../../LUFA/Drivers/USB/Core/USBTask.o
 ../../LUFA/Drivers/USB/Class/Common/HIDParser.o --output AVRISP-MKII.elf
 -Wl,-Map=AVRISP-MKII.map,--cref -Wl,--relax -Wl,--gc-sections     -lm
 collect2: ld terminated with signal 11 [Segmentation fault: 11]
 make: *** [AVRISP-MKII.elf] Error 1

 (I removed the build lines)

 I will check whether LTO is the problem.

-- 
Ticket URL: <https://trac.macports.org/ticket/33107#comment:12>
MacPorts <http://www.macports.org/>
Ports system for Mac OS