[MacPorts] #33331: py26-pybox2d: build fails (was: sudo port install py26-pybox2d)

Thu Feb 23 11:03:35 PST 2012

#33331: py26-pybox2d: build fails
-------------------------------+--------------------------------------------
 Reporter:  shazaum@…          |       Owner:  stromnov@…           
     Type:  defect             |      Status:  new                  
 Priority:  Normal             |   Milestone:                       
Component:  ports              |     Version:  2.0.3                
 Keywords:                     |        Port:  py26-pybox2d         
-------------------------------+--------------------------------------------
Changes (by ryandesign@…):

  * owner:  macports-tickets@… => stromnov@…
  * port:  => py26-pybox2d

Old description:

> version:1
> :debug:main Found Dependency: path: /usr/bin filename: unzip regex:
> ^unzip$
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main swig 2.0.4_0 exists in the ports tree
> :debug:main swig 2.0.4_0  is the latest installed
> :debug:main swig 2.0.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! swig 2.0.4_0 >= swig 2.0.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main pcre 8.12_1 exists in the ports tree
> :debug:main pcre 8.12_1  is the latest installed
> :debug:main pcre 8.12_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! pcre 8.12_1 >= pcre 8.12_1
> :debug:main epoch: in tree: 20090923 installed: 20090923
> :debug:main libedit 20110802-3.0_0 exists in the ports tree
> :debug:main libedit 20110802-3.0_0  is the latest installed
> :debug:main libedit 20110802-3.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit
> 20110802-3.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.9_1 exists in the ports tree
> :debug:main ncurses 5.9_1  is the latest installed
> :debug:main ncurses 5.9_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.6_0 exists in the ports tree
> :debug:main zlib 1.2.6_0  is the latest installed
> :debug:main zlib 1.2.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! zlib 1.2.6_0 >= zlib 1.2.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main bzip2 1.0.6_0 exists in the ports tree
> :debug:main bzip2 1.0.6_0  is the latest installed
> :debug:main bzip2 1.0.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python26 2.6.7_4 exists in the ports tree
> :debug:main python26 2.6.7_4  is the latest installed
> :debug:main python26 2.6.7_4  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! python26 2.6.7_4 >= python26 2.6.7_4
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2  is the latest installed
> :debug:main gettext 0.18.1.1_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.14_0 exists in the ports tree
> :debug:main libiconv 1.14_0  is the latest installed
> :debug:main libiconv 1.14_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.0.1_1 exists in the ports tree
> :debug:main expat 2.0.1_1  is the latest installed
> :debug:main expat 2.0.1_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main openssl 1.0.0g_0 exists in the ports tree
> :debug:main openssl 1.0.0g_0  is the latest installed
> :debug:main openssl 1.0.0g_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! openssl 1.0.0g_0 >= openssl 1.0.0g_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main sqlite3 3.7.10_0 exists in the ports tree
> :debug:main sqlite3 3.7.10_0  is the latest installed
> :debug:main sqlite3 3.7.10_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! sqlite3 3.7.10_0 >= sqlite3 3.7.10_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main db46 4.6.21_6 exists in the ports tree
> :debug:main db46 4.6.21_6  is the latest installed
> :debug:main db46 4.6.21_6  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python_select 0.3_1 exists in the ports tree
> :debug:main python_select 0.3_1  is the latest installed
> :debug:main python_select 0.3_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! python_select 0.3_1 >= python_select
> 0.3_1
> :msg:main --->  Computing dependencies for py26-pybox2d:info:main
> .:debug:main Searching for dependency: unzip
> :debug:main Didn't find receipt, going to depspec regex for: unzip
> :debug:main Found Dependency: path: /usr/bin filename: unzip regex:
> ^unzip$
> :debug:main Found Dependency: path: /usr/bin filename: unzip regex:
> ^unzip$
> :debug:main Searching for dependency: swig
> :debug:main Found Dependency: receipt exists for swig
> :debug:main Searching for dependency: python26
> :debug:main Found Dependency: receipt exists for python26
> :msg:main
> :debug:main Executing org.macports.main (py26-pybox2d)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 502
> :debug:main euid changed to: 504
> :debug:main Skipping completed org.macports.archivefetch (py26-pybox2d)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.fetch (py26-pybox2d)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.checksum (py26-pybox2d)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.extract (py26-pybox2d)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.patch (py26-pybox2d)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.configure (py26-pybox2d)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:build build phase started at Thu Feb 23 16:20:44 BRST 2012
> :notice:build --->  Building py26-pybox2d
> :debug:build Executing proc-pre-org.macports.build-build-0
> :debug:build Executing org.macports.build (py26-pybox2d)
> :debug:build Environment: CFLAGS='-arch x86_64' CXXFLAGS='-arch x86_64'
> CPATH='/opt/local/include' MACOSX_DEPLOYMENT_TARGET='10.7'
> LIBRARY_PATH='/opt/local/lib' F90FLAGS='-m64'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/.CC_PRINT_OPTIONS'
> LDFLAGS='-arch x86_64' FCFLAGS='-m64' OBJCFLAGS='-arch x86_64'
> FFLAGS='-m64' CC_PRINT_OPTIONS='YES'
> :debug:build Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/Box2D-2.0.2b2"
> &&
> /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6
> setup.py --no-user-cfg build'
> :debug:build Executing command line:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/Box2D-2.0.2b2"
> &&
> /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6
> setup.py --no-user-cfg build
> :info:build Using setuptools.
> :info:build running build
> :info:build running build_py
> :info:build copying ./__init__.py ->
> build/lib.macosx-10.7-x86_64-2.6/Box2D
> :info:build running build_ext
> :info:build building 'Box2D._Box2D' extension
> :info:build swigging Box2D/Box2D.i to Box2D/Box2D_wrap.cpp
> :info:build swig -python -c++ -IBox2D -O -small -includeall
> -ignoremissing -w201 -outdir . -o Box2D/Box2D_wrap.cpp Box2D/Box2D.i
> :info:build Box2D/Box2D_printing.i:29: Error: Syntax error in input(3).
> :info:build error: command 'swig' failed with exit status 1
> :info:build shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/Box2D-2.0.2b2"
> &&
> /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6
> setup.py --no-user-cfg build " returned error 1
> :error:build Target org.macports.build returned: shell command failed
> (see log for details)
> :debug:build Backtrace: shell command failed (see log for details)
>     while executing
> "command_exec build"
>     (procedure "portbuild::build_main" line 8)
>     invoked from within
> "$procedure $targetname"
> :info:build Warning: the following items did not execute (for
> py26-pybox2d): org.macports.activate org.macports.build
> org.macports.destroot org.macports.install
> :notice:build Log for py26-pybox2d is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/main.log

New description:

 {{{
 version:1
 :debug:main Found Dependency: path: /usr/bin filename: unzip regex:
 ^unzip$
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main swig 2.0.4_0 exists in the ports tree
 :debug:main swig 2.0.4_0  is the latest installed
 :debug:main swig 2.0.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! swig 2.0.4_0 >= swig 2.0.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main pcre 8.12_1 exists in the ports tree
 :debug:main pcre 8.12_1  is the latest installed
 :debug:main pcre 8.12_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! pcre 8.12_1 >= pcre 8.12_1
 :debug:main epoch: in tree: 20090923 installed: 20090923
 :debug:main libedit 20110802-3.0_0 exists in the ports tree
 :debug:main libedit 20110802-3.0_0  is the latest installed
 :debug:main libedit 20110802-3.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit
 20110802-3.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.9_1 exists in the ports tree
 :debug:main ncurses 5.9_1  is the latest installed
 :debug:main ncurses 5.9_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.6_0 exists in the ports tree
 :debug:main zlib 1.2.6_0  is the latest installed
 :debug:main zlib 1.2.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! zlib 1.2.6_0 >= zlib 1.2.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0  is the latest installed
 :debug:main bzip2 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python26 2.6.7_4 exists in the ports tree
 :debug:main python26 2.6.7_4  is the latest installed
 :debug:main python26 2.6.7_4  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! python26 2.6.7_4 >= python26 2.6.7_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2  is the latest installed
 :debug:main gettext 0.18.1.1_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.14_0 exists in the ports tree
 :debug:main libiconv 1.14_0  is the latest installed
 :debug:main libiconv 1.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_1 exists in the ports tree
 :debug:main expat 2.0.1_1  is the latest installed
 :debug:main expat 2.0.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.0g_0 exists in the ports tree
 :debug:main openssl 1.0.0g_0  is the latest installed
 :debug:main openssl 1.0.0g_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! openssl 1.0.0g_0 >= openssl 1.0.0g_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main sqlite3 3.7.10_0 exists in the ports tree
 :debug:main sqlite3 3.7.10_0  is the latest installed
 :debug:main sqlite3 3.7.10_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! sqlite3 3.7.10_0 >= sqlite3 3.7.10_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main db46 4.6.21_6 exists in the ports tree
 :debug:main db46 4.6.21_6  is the latest installed
 :debug:main db46 4.6.21_6  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python_select 0.3_1 exists in the ports tree
 :debug:main python_select 0.3_1  is the latest installed
 :debug:main python_select 0.3_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
 :msg:main --->  Computing dependencies for py26-pybox2d:info:main
 .:debug:main Searching for dependency: unzip
 :debug:main Didn't find receipt, going to depspec regex for: unzip
 :debug:main Found Dependency: path: /usr/bin filename: unzip regex:
 ^unzip$
 :debug:main Found Dependency: path: /usr/bin filename: unzip regex:
 ^unzip$
 :debug:main Searching for dependency: swig
 :debug:main Found Dependency: receipt exists for swig
 :debug:main Searching for dependency: python26
 :debug:main Found Dependency: receipt exists for python26
 :msg:main
 :debug:main Executing org.macports.main (py26-pybox2d)
 :debug:main changing euid/egid - current euid: 0 - current egid: 0
 :debug:main egid changed to: 502
 :debug:main euid changed to: 504
 :debug:main Skipping completed org.macports.archivefetch (py26-pybox2d)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.fetch (py26-pybox2d)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.checksum (py26-pybox2d)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.extract (py26-pybox2d)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.patch (py26-pybox2d)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.configure (py26-pybox2d)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:build build phase started at Thu Feb 23 16:20:44 BRST 2012
 :notice:build --->  Building py26-pybox2d
 :debug:build Executing proc-pre-org.macports.build-build-0
 :debug:build Executing org.macports.build (py26-pybox2d)
 :debug:build Environment: CFLAGS='-arch x86_64' CXXFLAGS='-arch x86_64'
 CPATH='/opt/local/include' MACOSX_DEPLOYMENT_TARGET='10.7'
 LIBRARY_PATH='/opt/local/lib' F90FLAGS='-m64'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/.CC_PRINT_OPTIONS'
 LDFLAGS='-arch x86_64' FCFLAGS='-m64' OBJCFLAGS='-arch x86_64'
 FFLAGS='-m64' CC_PRINT_OPTIONS='YES'
 :debug:build Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/Box2D-2.0.2b2"
 &&
 /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6
 setup.py --no-user-cfg build'
 :debug:build Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/Box2D-2.0.2b2"
 &&
 /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6
 setup.py --no-user-cfg build
 :info:build Using setuptools.
 :info:build running build
 :info:build running build_py
 :info:build copying ./__init__.py ->
 build/lib.macosx-10.7-x86_64-2.6/Box2D
 :info:build running build_ext
 :info:build building 'Box2D._Box2D' extension
 :info:build swigging Box2D/Box2D.i to Box2D/Box2D_wrap.cpp
 :info:build swig -python -c++ -IBox2D -O -small -includeall -ignoremissing
 -w201 -outdir . -o Box2D/Box2D_wrap.cpp Box2D/Box2D.i
 :info:build Box2D/Box2D_printing.i:29: Error: Syntax error in input(3).
 :info:build error: command 'swig' failed with exit status 1
 :info:build shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/Box2D-2.0.2b2"
 &&
 /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6
 setup.py --no-user-cfg build " returned error 1
 :error:build Target org.macports.build returned: shell command failed (see
 log for details)
 :debug:build Backtrace: shell command failed (see log for details)
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: the following items did not execute (for
 py26-pybox2d): org.macports.activate org.macports.build
 org.macports.destroot org.macports.install
 :notice:build Log for py26-pybox2d is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/main.log
 }}}

--

Comment:

 The log you pasted is not clean. (It contains lines that say "Skipping
 completed".) Please "`sudo port clean py26-pybox2d`" and try again, then
 attach the complete main.log.

-- 
Ticket URL: <https://trac.macports.org/ticket/33331#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS