[MacPorts] #34545: Can't install kdevplatform
MacPorts
noreply at macports.org
Mon Jun 4 12:07:51 PDT 2012
#34545: Can't install kdevplatform
-------------------------------+--------------------------------------------
Reporter: dave@… | Owner: nicos@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.1.1
Keywords: | Port: kdevplatform
-------------------------------+--------------------------------------------
Old description:
> {{{
>
> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main cmake 2.8.8_0 exists in the ports tree
> :debug:main cmake 2.8.8_0 is the latest installed
> :debug:main cmake 2.8.8_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /Users/dave/Public/MacPorts/Portfiles/devel/cmake
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port cmake.
> :debug:main Requested variant +quartz is not provided by port cmake.
> :debug:main No need to upgrade! cmake 2.8.8_0 >= cmake 2.8.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libidn 1.22_0 exists in the ports tree
> :debug:main libidn 1.22_0 is the latest installed
> :debug:main libidn 1.22_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/mail/libidn
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libidn.
> :debug:main Requested variant +quartz is not provided by port libidn.
> :debug:main No need to upgrade! libidn 1.22_0 >= libidn 1.22_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.14_0 exists in the ports tree
> :debug:main libiconv 1.14_0 is the latest installed
> :debug:main libiconv 1.14_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal + no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port libiconv.
> :debug:main Requested variant +quartz is not provided by port libiconv.
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2 is the latest installed
> :debug:main gettext 0.18.1.1_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port gettext.
> :debug:main Requested variant +quartz is not provided by port gettext.
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.9_1 exists in the ports tree
> :debug:main ncurses 5.9_1 is the latest installed
> :debug:main ncurses 5.9_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port ncurses.
> :debug:main Requested variant +quartz is not provided by port ncurses.
> :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.1.0_0 exists in the ports tree
> :debug:main expat 2.1.0_0 is the latest installed
> :debug:main expat 2.1.0_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal + no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port expat.
> :debug:main Requested variant +quartz is not provided by port expat.
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main openssl 1.0.1c_0 exists in the ports tree
> :debug:main openssl 1.0.1c_0 is the latest installed
> :debug:main openssl 1.0.1c_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port openssl.
> :debug:main Requested variant +quartz is not provided by port openssl.
> :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.7_0 exists in the ports tree
> :debug:main zlib 1.2.7_0 is the latest installed
> :debug:main zlib 1.2.7_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal + no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port zlib.
> :debug:main Requested variant +quartz is not provided by port zlib.
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main pkgconfig 0.26_1 exists in the ports tree
> :debug:main pkgconfig 0.26_1 is the latest installed
> :debug:main pkgconfig 0.26_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port pkgconfig.
> :debug:main Requested variant +quartz is not provided by port pkgconfig.
> :debug:main No need to upgrade! pkgconfig 0.26_1 >= pkgconfig 0.26_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main glib2 2.32.3_0 exists in the ports tree
> :debug:main glib2 2.32.3_0 is the latest installed
> :debug:main glib2 2.32.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port glib2.
> :debug:main Requested variant +quartz is not provided by port glib2.
> :debug:main No need to upgrade! glib2 2.32.3_0 >= glib2 2.32.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libffi 3.0.10_2 exists in the ports tree
> :debug:main libffi 3.0.10_2 is the latest installed
> :debug:main libffi 3.0.10_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port libffi.
> :debug:main Requested variant +quartz is not provided by port libffi.
> :debug:main No need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5 5.12.3_1 exists in the ports tree
> :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
> :debug:main perl5 5.12.3_1 +perl5_12 is active
> :debug:main Merging existing variants '+perl5_12' into variants
> :debug:main new fully merged portvariants: no_x11 + perl5_12 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port perl5.
> :debug:main Requested variant +quartz is not provided by port perl5.
> :debug:main Executing variant perl5_12 provides perl5_12
> :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5.12 5.12.4_0 exists in the ports tree
> :debug:main perl5.12 5.12.4_0 is the latest installed
> :debug:main perl5.12 5.12.4_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port perl5.12.
> :debug:main Requested variant +quartz is not provided by port perl5.12.
> :debug:main No need to upgrade! perl5.12 5.12.4_0 >= perl5.12 5.12.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gdbm 1.10_1 exists in the ports tree
> :debug:main gdbm 1.10_1 is the latest installed
> :debug:main gdbm 1.10_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port gdbm.
> :debug:main Requested variant +quartz is not provided by port gdbm.
> :debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main automoc 0.9.88_3 exists in the ports tree
> :debug:main automoc 0.9.88_3 is the latest installed
> :debug:main automoc 0.9.88_3 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automoc
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Re-registering default for configure.dir
> :debug:main Re-registering default for build.dir
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port automoc.
> :debug:main Requested variant +quartz is not provided by port automoc.
> :debug:main No need to upgrade! automoc 0.9.88_3 >= automoc 0.9.88_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main qt4-mac 4.7.4_1 exists in the ports tree
> :debug:main qt4-mac 4.7.4_1 +quartz is the latest installed
> :debug:main qt4-mac 4.7.4_1 +quartz is active
> :debug:main Merging existing variants '+quartz' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/aqua/qt4-mac
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port qt4-mac.
> :debug:main Executing variant quartz provides quartz
> :debug:main No need to upgrade! qt4-mac 4.7.4_1 >= qt4-mac 4.7.4_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main dbus 1.4.20_1 exists in the ports tree
> :debug:main dbus 1.4.20_1 +startupitem is the latest installed
> :debug:main dbus 1.4.20_1 +startupitem is active
> :debug:main Merging existing variants '+startupitem' into variants
> :debug:main new fully merged portvariants: no_x11 + startupitem + quartz
> +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port dbus.
> :debug:main Requested variant +quartz is not provided by port dbus.
> :debug:main Executing variant startupitem provides startupitem
> :debug:main No need to upgrade! dbus 1.4.20_1 >= dbus 1.4.20_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main sqlite3 3.7.12_0 exists in the ports tree
> :debug:main sqlite3 3.7.12_0 is the latest installed
> :debug:main sqlite3 3.7.12_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port sqlite3.
> :debug:main Requested variant +quartz is not provided by port sqlite3.
> :debug:main No need to upgrade! sqlite3 3.7.12_0 >= sqlite3 3.7.12_0
> :debug:main epoch: in tree: 20090923 installed: 20090923
> :debug:main libedit 20110802-3.0_0 exists in the ports tree
> :debug:main libedit 20110802-3.0_0 is the latest installed
> :debug:main libedit 20110802-3.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port libedit.
> :debug:main Requested variant +quartz is not provided by port libedit.
> :debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit
> 20110802-3.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main tiff 3.9.5_0 exists in the ports tree
> :debug:main tiff 3.9.5_0 is the latest installed
> :debug:main tiff 3.9.5_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port tiff.
> :debug:main Requested variant +quartz is not provided by port tiff.
> :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jpeg 8d_0 exists in the ports tree
> :debug:main jpeg 8d_0 is the latest installed
> :debug:main jpeg 8d_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port jpeg.
> :debug:main Requested variant +quartz is not provided by port jpeg.
> :debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpng 1.4.11_0 exists in the ports tree
> :debug:main libpng 1.4.11_0 is the latest installed
> :debug:main libpng 1.4.11_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libpng.
> :debug:main Requested variant +quartz is not provided by port libpng.
> :debug:main No need to upgrade! libpng 1.4.11_0 >= libpng 1.4.11_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libmng 1.0.10_2 exists in the ports tree
> :debug:main libmng 1.0.10_2 is the latest installed
> :debug:main libmng 1.0.10_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libmng
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libmng.
> :debug:main Requested variant +quartz is not provided by port libmng.
> :debug:main No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main lcms 1.19_2 exists in the ports tree
> :debug:main lcms 1.19_2 is the latest installed
> :debug:main lcms 1.19_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port lcms.
> :debug:main Requested variant +quartz is not provided by port lcms.
> :debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main phonon 4.4.2_3 exists in the ports tree
> :debug:main phonon 4.4.2_3 is the latest installed
> :debug:main phonon 4.4.2_3 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/phonon
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port phonon.
> :debug:main Requested variant +quartz is not provided by port phonon.
> :debug:main No need to upgrade! phonon 4.4.2_3 >= phonon 4.4.2_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main kdelibs4 4.8.3_0 exists in the ports tree
> :debug:main kdelibs4 4.8.3_0 is the latest installed
> :debug:main kdelibs4 4.8.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/kde/kdelibs4
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Re-registering default for configure.dir
> :debug:main Re-registering default for build.dir
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port kdelibs4.
> :debug:main Requested variant +quartz is not provided by port kdelibs4.
> :debug:main No need to upgrade! kdelibs4 4.8.3_0 >= kdelibs4 4.8.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main bzip2 1.0.6_0 exists in the ports tree
> :debug:main bzip2 1.0.6_0 is the latest installed
> :debug:main bzip2 1.0.6_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal + no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port bzip2.
> :debug:main Requested variant +quartz is not provided by port bzip2.
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main soprano 2.7.4_0 exists in the ports tree
> :debug:main soprano 2.7.4_0 is the latest installed
> :debug:main soprano 2.7.4_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/soprano
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Re-registering default for configure.dir
> :debug:main Re-registering default for build.dir
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port soprano.
> :debug:main Requested variant +quartz is not provided by port soprano.
> :debug:main No need to upgrade! soprano 2.7.4_0 >= soprano 2.7.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main clucene 0.9.21b_0 exists in the ports tree
> :debug:main clucene 0.9.21b_0 is the latest installed
> :debug:main clucene 0.9.21b_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/clucene
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port clucene.
> :debug:main Requested variant +quartz is not provided by port clucene.
> :debug:main No need to upgrade! clucene 0.9.21b_0 >= clucene 0.9.21b_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main strigi 0.7.5_1 exists in the ports tree
> :debug:main strigi 0.7.5_1 is the latest installed
> :debug:main strigi 0.7.5_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/strigi
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Re-registering default for configure.dir
> :debug:main Re-registering default for build.dir
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port strigi.
> :debug:main Requested variant +quartz is not provided by port strigi.
> :debug:main No need to upgrade! strigi 0.7.5_1 >= strigi 0.7.5_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libxml2 2.7.8_0 exists in the ports tree
> :debug:main libxml2 2.7.8_0 is the latest installed
> :debug:main libxml2 2.7.8_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libxml2.
> :debug:main Requested variant +quartz is not provided by port libxml2.
> :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main ffmpeg 0.7.11_1 exists in the ports tree
> :debug:main ffmpeg 0.7.11_1 +mmx is the latest installed
> :debug:main ffmpeg 0.7.11_1 +mmx is active
> :debug:main Merging existing variants '+mmx' into variants
> :debug:main new fully merged portvariants: no_x11 + mmx + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/ffmpeg
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port ffmpeg.
> :debug:main Requested variant +quartz is not provided by port ffmpeg.
> :debug:main Executing variant mmx provides mmx
> :debug:main No need to upgrade! ffmpeg 0.7.11_1 >= ffmpeg 0.7.11_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main lame 3.99_1 exists in the ports tree
> :debug:main lame 3.99_1 is the latest installed
> :debug:main lame 3.99_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/lame
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port lame.
> :debug:main Requested variant +quartz is not provided by port lame.
> :debug:main No need to upgrade! lame 3.99_1 >= lame 3.99_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libvorbis 1.3.2_1 exists in the ports tree
> :debug:main libvorbis 1.3.2_1 is the latest installed
> :debug:main libvorbis 1.3.2_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/libvorbis
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libvorbis.
> :debug:main Requested variant +quartz is not provided by port libvorbis.
> :debug:main No need to upgrade! libvorbis 1.3.2_1 >= libvorbis 1.3.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libogg 1.3.0_1 exists in the ports tree
> :debug:main libogg 1.3.0_1 is the latest installed
> :debug:main libogg 1.3.0_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libogg
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libogg.
> :debug:main Requested variant +quartz is not provided by port libogg.
> :debug:main No need to upgrade! libogg 1.3.0_1 >= libogg 1.3.0_1
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main libtheora 1.1.1_1 exists in the ports tree
> :debug:main libtheora 1.1.1_1 is the latest installed
> :debug:main libtheora 1.1.1_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libtheora
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libtheora.
> :debug:main Requested variant +quartz is not provided by port libtheora.
> :debug:main No need to upgrade! libtheora 1.1.1_1 >= libtheora 1.1.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main dirac 1.0.2_1 exists in the ports tree
> :debug:main dirac 1.0.2_1 is the latest installed
> :debug:main dirac 1.0.2_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/dirac
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port dirac.
> :debug:main Requested variant +quartz is not provided by port dirac.
> :debug:main No need to upgrade! dirac 1.0.2_1 >= dirac 1.0.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main cppunit 1.12.1_0 exists in the ports tree
> :debug:main cppunit 1.12.1_0 is the latest installed
> :debug:main cppunit 1.12.1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cppunit
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port cppunit.
> :debug:main Requested variant +quartz is not provided by port cppunit.
> :debug:main No need to upgrade! cppunit 1.12.1_0 >= cppunit 1.12.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main schroedinger 1.0.11_0 exists in the ports tree
> :debug:main schroedinger 1.0.11_0 is the latest installed
> :debug:main schroedinger 1.0.11_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/schroedinger
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port
> schroedinger.
> :debug:main Requested variant +quartz is not provided by port
> schroedinger.
> :debug:main No need to upgrade! schroedinger 1.0.11_0 >= schroedinger
> 1.0.11_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main orc 0.4.16_0 exists in the ports tree
> :debug:main orc 0.4.16_0 is the latest installed
> :debug:main orc 0.4.16_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orc
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port orc.
> :debug:main Requested variant +quartz is not provided by port orc.
> :debug:main No need to upgrade! orc 0.4.16_0 >= orc 0.4.16_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main openjpeg 1.5.0_1 exists in the ports tree
> :debug:main openjpeg 1.5.0_1 is the latest installed
> :debug:main openjpeg 1.5.0_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/openjpeg
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port openjpeg.
> :debug:main Requested variant +quartz is not provided by port openjpeg.
> :debug:main No need to upgrade! openjpeg 1.5.0_1 >= openjpeg 1.5.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main lcms2 2.3_0 exists in the ports tree
> :debug:main lcms2 2.3_0 is the latest installed
> :debug:main lcms2 2.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port lcms2.
> :debug:main Requested variant +quartz is not provided by port lcms2.
> :debug:main No need to upgrade! lcms2 2.3_0 >= lcms2 2.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jbigkit 2.0_2 exists in the ports tree
> :debug:main jbigkit 2.0_2 is the latest installed
> :debug:main jbigkit 2.0_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jbigkit
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port jbigkit.
> :debug:main Requested variant +quartz is not provided by port jbigkit.
> :debug:main No need to upgrade! jbigkit 2.0_2 >= jbigkit 2.0_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main speex 1.2rc1_0 exists in the ports tree
> :debug:main speex 1.2rc1_0 is the latest installed
> :debug:main speex 1.2rc1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/speex
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port speex.
> :debug:main Requested variant +quartz is not provided by port speex.
> :debug:main No need to upgrade! speex 1.2rc1_0 >= speex 1.2rc1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main XviD 1.3.2_2 exists in the ports tree
> :debug:main XviD 1.3.2_2 is the latest installed
> :debug:main XviD 1.3.2_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/XviD
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port XviD.
> :debug:main Requested variant +quartz is not provided by port XviD.
> :debug:main No need to upgrade! XviD 1.3.2_2 >= XviD 1.3.2_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main x264 20111210_0 exists in the ports tree
> :debug:main x264 20111210_0 is the latest installed
> :debug:main x264 20111210_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/x264
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port x264.
> :debug:main Requested variant +quartz is not provided by port x264.
> :debug:main No need to upgrade! x264 20111210_0 >= x264 20111210_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libvpx 1.0.0_0 exists in the ports tree
> :debug:main libvpx 1.0.0_0 is the latest installed
> :debug:main libvpx 1.0.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libvpx
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port libvpx.
> :debug:main Requested variant +quartz is not provided by port libvpx.
> :debug:main No need to upgrade! libvpx 1.0.0_0 >= libvpx 1.0.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libsdl 1.2.15_0 exists in the ports tree
> :debug:main libsdl 1.2.15_0 +no_x11 is the latest installed
> :debug:main libsdl 1.2.15_0 +no_x11 is active
> :debug:main Merging existing variants '+no_x11-x11' into variants
> :debug:main new fully merged portvariants: x11 - no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libsdl
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Requested variant +quartz is not provided by port libsdl.
> :debug:main Executing variant no_x11 provides no_x11
> :debug:main No need to upgrade! libsdl 1.2.15_0 >= libsdl 1.2.15_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main raptor2 2.0.7_0 exists in the ports tree
> :debug:main raptor2 2.0.7_0 is the latest installed
> :debug:main raptor2 2.0.7_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/www/raptor2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port raptor2.
> :debug:main Requested variant +quartz is not provided by port raptor2.
> :debug:main No need to upgrade! raptor2 2.0.7_0 >= raptor2 2.0.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main curl 7.25.0_1 exists in the ports tree
> :debug:main curl 7.25.0_1 +ssl is the latest installed
> :debug:main curl 7.25.0_1 +ssl is active
> :debug:main Merging existing variants '+ssl' into variants
> :debug:main new fully merged portvariants: no_x11 + ssl + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/curl
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port curl.
> :debug:main Requested variant +quartz is not provided by port curl.
> :debug:main Executing variant ssl provides ssl
> :debug:main No need to upgrade! curl 7.25.0_1 >= curl 7.25.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main curl-ca-bundle 7.25.0_0 exists in the ports tree
> :debug:main curl-ca-bundle 7.25.0_0 is the latest installed
> :debug:main curl-ca-bundle 7.25.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net
> /curl-ca-bundle
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port curl-ca-
> bundle.
> :debug:main Requested variant +quartz is not provided by port curl-ca-
> bundle.
> :debug:main No need to upgrade! curl-ca-bundle 7.25.0_0 >= curl-ca-bundle
> 7.25.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libxslt 1.1.26_0 exists in the ports tree
> :debug:main libxslt 1.1.26_0 +doc is the latest installed
> :debug:main libxslt 1.1.26_0 +doc is active
> :debug:main Merging existing variants '+doc' into variants
> :debug:main new fully merged portvariants: no_x11 + doc + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxslt
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libxslt.
> :debug:main Requested variant +quartz is not provided by port libxslt.
> :debug:main Executing variant doc provides doc
> :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main redland 1.0.15_0 exists in the ports tree
> :debug:main redland 1.0.15_0 +db46 is the latest installed
> :debug:main redland 1.0.15_0 +db46 is active
> :debug:main Merging existing variants '+db46' into variants
> :debug:main new fully merged portvariants: db46 + no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/www/redland
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Requested variant +no_x11 is not provided by port redland.
> :debug:main Requested variant +quartz is not provided by port redland.
> :debug:main Executing variant db46 provides db46
> :debug:main No need to upgrade! redland 1.0.15_0 >= redland 1.0.15_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libtool 2.4.2_0 exists in the ports tree
> :debug:main libtool 2.4.2_0 is the latest installed
> :debug:main libtool 2.4.2_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libtool.
> :debug:main Requested variant +quartz is not provided by port libtool.
> :debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main rasqal 0.9.28_0 exists in the ports tree
> :debug:main rasqal 0.9.28_0 is the latest installed
> :debug:main rasqal 0.9.28_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/www/rasqal
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port rasqal.
> :debug:main Requested variant +quartz is not provided by port rasqal.
> :debug:main No need to upgrade! rasqal 0.9.28_0 >= rasqal 0.9.28_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main mhash 0.9.9.9_0 exists in the ports tree
> :debug:main mhash 0.9.9.9_0 is the latest installed
> :debug:main mhash 0.9.9.9_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/mhash
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port mhash.
> :debug:main Requested variant +quartz is not provided by port mhash.
> :debug:main No need to upgrade! mhash 0.9.9.9_0 >= mhash 0.9.9.9_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main mpfr 3.1.0-p3_1 exists in the ports tree
> :debug:main mpfr 3.1.0-p3_1 is the latest installed
> :debug:main mpfr 3.1.0-p3_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/mpfr
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port mpfr.
> :debug:main Requested variant +quartz is not provided by port mpfr.
> :debug:main No need to upgrade! mpfr 3.1.0-p3_1 >= mpfr 3.1.0-p3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gmp 5.0.4_0 exists in the ports tree
> :debug:main gmp 5.0.4_0 is the latest installed
> :debug:main gmp 5.0.4_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmp
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port gmp.
> :debug:main Requested variant +quartz is not provided by port gmp.
> :debug:main No need to upgrade! gmp 5.0.4_0 >= gmp 5.0.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main db46 4.6.21_6 exists in the ports tree
> :debug:main db46 4.6.21_6 +java is the latest installed
> :debug:main db46 4.6.21_6 +java is active
> :debug:main Merging existing variants '+java' into variants
> :debug:main new fully merged portvariants: no_x11 + java + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port db46.
> :debug:main Requested variant +quartz is not provided by port db46.
> :debug:main Executing variant java provides java
> :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiodbc 3.52.8_0 exists in the ports tree
> :debug:main libiodbc 3.52.8_0 is the latest installed
> :debug:main libiodbc 3.52.8_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libiodbc
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/github-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libiodbc.
> :debug:main Requested variant +quartz is not provided by port libiodbc.
> :debug:main No need to upgrade! libiodbc 3.52.8_0 >= libiodbc 3.52.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main virtuoso 6.1.5_0 exists in the ports tree
> :debug:main virtuoso 6.1.5_0 is the latest installed
> :debug:main virtuoso 6.1.5_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/virtuoso
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port virtuoso.
> :debug:main Requested variant +quartz is not provided by port virtuoso.
> :debug:main No need to upgrade! virtuoso 6.1.5_0 >= virtuoso 6.1.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main cyrus-sasl2 2.1.23_3 exists in the ports tree
> :debug:main cyrus-sasl2 2.1.23_3 +kerberos is the latest installed
> :debug:main cyrus-sasl2 2.1.23_3 +kerberos is active
> :debug:main Merging existing variants '+kerberos' into variants
> :debug:main new fully merged portvariants: kerberos + no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security
> /cyrus-sasl2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port cyrus-
> sasl2.
> :debug:main Requested variant +quartz is not provided by port cyrus-
> sasl2.
> :debug:main Executing variant kerberos provides kerberos
> :debug:main No need to upgrade! cyrus-sasl2 2.1.23_3 >= cyrus-sasl2
> 2.1.23_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main pcre 8.30_0 exists in the ports tree
> :debug:main pcre 8.30_0 is the latest installed
> :debug:main pcre 8.30_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pcre
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port pcre.
> :debug:main Requested variant +quartz is not provided by port pcre.
> :debug:main No need to upgrade! pcre 8.30_0 >= pcre 8.30_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main shared-mime-info 1.0_0 exists in the ports tree
> :debug:main shared-mime-info 1.0_0 is the latest installed
> :debug:main shared-mime-info 1.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
> /shared-mime-info
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port shared-
> mime-info.
> :debug:main Requested variant +quartz is not provided by port shared-
> mime-info.
> :debug:main No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-
> info 1.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main giflib 4.2.0_1 exists in the ports tree
> :debug:main giflib 4.2.0_1 +no_x11 is the latest installed
> :debug:main giflib 4.2.0_1 +no_x11 is active
> :debug:main Merging existing variants '+no_x11-x11' into variants
> :debug:main new fully merged portvariants: x11 - no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/giflib
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Requested variant +quartz is not provided by port giflib.
> :debug:main Executing variant no_x11 provides no_x11
> :debug:main No need to upgrade! giflib 4.2.0_1 >= giflib 4.2.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jasper 1.900.1_9 exists in the ports tree
> :debug:main jasper 1.900.1_9 is the latest installed
> :debug:main jasper 1.900.1_9 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port jasper.
> :debug:main Requested variant +quartz is not provided by port jasper.
> :debug:main No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main openexr 1.7.0_0 exists in the ports tree
> :debug:main openexr 1.7.0_0 is the latest installed
> :debug:main openexr 1.7.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/openexr
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port openexr.
> :debug:main Requested variant +quartz is not provided by port openexr.
> :debug:main No need to upgrade! openexr 1.7.0_0 >= openexr 1.7.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ilmbase 1.0.2_0 exists in the ports tree
> :debug:main ilmbase 1.0.2_0 is the latest installed
> :debug:main ilmbase 1.0.2_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/ilmbase
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port ilmbase.
> :debug:main Requested variant +quartz is not provided by port ilmbase.
> :debug:main No need to upgrade! ilmbase 1.0.2_0 >= ilmbase 1.0.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libart_lgpl 2.3.21_0 exists in the ports tree
> :debug:main libart_lgpl 2.3.21_0 is the latest installed
> :debug:main libart_lgpl 2.3.21_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libart_lgpl
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port
> libart_lgpl.
> :debug:main Requested variant +quartz is not provided by port
> libart_lgpl.
> :debug:main No need to upgrade! libart_lgpl 2.3.21_0 >= libart_lgpl
> 2.3.21_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main enchant 1.6.0_1 exists in the ports tree
> :debug:main enchant 1.6.0_1 is the latest installed
> :debug:main enchant 1.6.0_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/enchant
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port enchant.
> :debug:main Requested variant +quartz is not provided by port enchant.
> :debug:main No need to upgrade! enchant 1.6.0_1 >= enchant 1.6.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main aspell 0.60.6_4 exists in the ports tree
> :debug:main aspell 0.60.6_4 +nonls is the latest installed
> :debug:main aspell 0.60.6_4 +nonls is active
> :debug:main Merging existing variants '+nonls' into variants
> :debug:main new fully merged portvariants: no_x11 + nonls + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/aspell
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Requested variant +no_x11 is not provided by port aspell.
> :debug:main Requested variant +quartz is not provided by port aspell.
> :debug:main Executing variant nonls provides nonls
> :debug:main No need to upgrade! aspell 0.60.6_4 >= aspell 0.60.6_4
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main texinfo 4.13_2 exists in the ports tree
> :debug:main texinfo 4.13_2 is the latest installed
> :debug:main texinfo 4.13_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/texinfo
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port texinfo.
> :debug:main Requested variant +quartz is not provided by port texinfo.
> :debug:main No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main hunspell 1.3.2_0 exists in the ports tree
> :debug:main hunspell 1.3.2_0 is the latest installed
> :debug:main hunspell 1.3.2_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/hunspell
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port hunspell.
> :debug:main Requested variant +quartz is not provided by port hunspell.
> :debug:main No need to upgrade! hunspell 1.3.2_0 >= hunspell 1.3.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main readline 6.2.000_0 exists in the ports tree
> :debug:main readline 6.2.000_0 is the latest installed
> :debug:main readline 6.2.000_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port readline.
> :debug:main Requested variant +quartz is not provided by port readline.
> :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main aspell-dict-en 7.1_0 exists in the ports tree
> :debug:main aspell-dict-en 7.1_0 is the latest installed
> :debug:main aspell-dict-en 7.1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /aspell-dict-en
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant +no_x11 is not provided by port aspell-
> dict-en.
> :debug:main Requested variant +quartz is not provided by port aspell-
> dict-en.
> :debug:main No need to upgrade! aspell-dict-en 7.1_0 >= aspell-dict-en
> 7.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main attica 0.3.0_0 exists in the ports tree
> :debug:main attica 0.3.0_0 is the latest installed
> :debug:main attica 0.3.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/kde/attica
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Re-registering default for configure.dir
> :debug:main Re-registering default for build.dir
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port attica.
> :debug:main Requested variant +quartz is not provided by port attica.
> :debug:main No need to upgrade! attica 0.3.0_0 >= attica 0.3.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main liblzma 5.0.3_0 exists in the ports tree
> :debug:main liblzma 5.0.3_0 is the latest installed
> :debug:main liblzma 5.0.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/liblzma
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port liblzma.
> :debug:main Requested variant +quartz is not provided by port liblzma.
> :debug:main No need to upgrade! liblzma 5.0.3_0 >= liblzma 5.0.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main avahi 0.6.31_1 exists in the ports tree
> :debug:main avahi 0.6.31_1 +gtk+python27 is the latest installed
> :debug:main avahi 0.6.31_1 +gtk+python27 is active
> :debug:main Merging existing variants '+gtk+python27' into variants
> :debug:main new fully merged portvariants: no_x11 + gtk + quartz +
> python27 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/avahi
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port avahi.
> :debug:main Requested variant +quartz is not provided by port avahi.
> :debug:main Executing variant gtk provides gtk
> :debug:main Executing variant python27 provides python27
> :debug:main No need to upgrade! avahi 0.6.31_1 >= avahi 0.6.31_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libdaemon 0.14_0 exists in the ports tree
> :debug:main libdaemon 0.14_0 is the latest installed
> :debug:main libdaemon 0.14_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libdaemon
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port libdaemon.
> :debug:main Requested variant +quartz is not provided by port libdaemon.
> :debug:main No need to upgrade! libdaemon 0.14_0 >= libdaemon 0.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libglade2 2.6.4_4 exists in the ports tree
> :debug:main libglade2 2.6.4_4 +quartz is the latest installed
> :debug:main libglade2 2.6.4_4 +quartz is active
> :debug:main Merging existing variants '+quartz' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/libglade2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Requested variant +no_x11 is not provided by port libglade2.
> :debug:main Executing variant quartz provides quartz
> :debug:main No need to upgrade! libglade2 2.6.4_4 >= libglade2 2.6.4_4
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main fontconfig 2.9.0_1 exists in the ports tree
> :debug:main fontconfig 2.9.0_1 is the latest installed
> :debug:main fontconfig 2.9.0_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal + no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port fontconfig.
> :debug:main Requested variant +quartz is not provided by port fontconfig.
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main freetype 2.4.9_1 exists in the ports tree
> :debug:main freetype 2.4.9_1 is the latest installed
> :debug:main freetype 2.4.9_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal + no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port freetype.
> :debug:main Requested variant +quartz is not provided by port freetype.
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! freetype 2.4.9_1 >= freetype 2.4.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gtk2 2.24.10_0 exists in the ports tree
> :debug:main gtk2 2.24.10_0 +no_x11+quartz is the latest installed
> :debug:main gtk2 2.24.10_0 +no_x11+quartz is active
> :debug:main Merging existing variants '+no_x11+quartz' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant no_x11 provides no_x11
> :debug:main Executing variant quartz provides quartz
> :debug:main No need to upgrade! gtk2 2.24.10_0 >= gtk2 2.24.10_0
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main atk 2.2.0_0 exists in the ports tree
> :debug:main atk 2.2.0_0 is the latest installed
> :debug:main atk 2.2.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port atk.
> :debug:main Requested variant +quartz is not provided by port atk.
> :debug:main No need to upgrade! atk 2.2.0_0 >= atk 2.2.0_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main pango 1.30.0_0 exists in the ports tree
> :debug:main pango 1.30.0_0 +no_x11+quartz is the latest installed
> :debug:main pango 1.30.0_0 +no_x11+quartz is active
> :debug:main Merging existing variants '+no_x11+quartz-x11' into variants
> :debug:main new fully merged portvariants: x11 - no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Executing variant quartz provides quartz
> :debug:main Executing variant no_x11 provides no_x11
> :debug:main No need to upgrade! pango 1.30.0_0 >= pango 1.30.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main cairo 1.12.2_0 exists in the ports tree
> :debug:main cairo 1.12.2_0 +no_x11+quartz is the latest installed
> :debug:main cairo 1.12.2_0 +no_x11+quartz is active
> :debug:main Merging existing variants '+no_x11+quartz-x11' into variants
> :debug:main new fully merged portvariants: x11 - no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant quartz provides quartz
> :debug:main Executing variant no_x11 provides no_x11
> :debug:main No need to upgrade! cairo 1.12.2_0 >= cairo 1.12.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpixman 0.24.4_0 exists in the ports tree
> :debug:main libpixman 0.24.4_0 is the latest installed
> :debug:main libpixman 0.24.4_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port libpixman.
> :debug:main Requested variant +quartz is not provided by port libpixman.
> :debug:main No need to upgrade! libpixman 0.24.4_0 >= libpixman 0.24.4_0
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main gdk-pixbuf2 2.26.1_0 exists in the ports tree
> :debug:main gdk-pixbuf2 2.26.1_0 is the latest installed
> :debug:main gdk-pixbuf2 2.26.1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics
> /gdk-pixbuf2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port gdk-
> pixbuf2.
> :debug:main Requested variant +quartz is not provided by port gdk-
> pixbuf2.
> :debug:main No need to upgrade! gdk-pixbuf2 2.26.1_0 >= gdk-pixbuf2
> 2.26.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
> :debug:main hicolor-icon-theme 0.12_0 is the latest installed
> :debug:main hicolor-icon-theme 0.12_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /hicolor-icon-theme
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant +no_x11 is not provided by port hicolor-
> icon-theme.
> :debug:main Requested variant +quartz is not provided by port hicolor-
> icon-theme.
> :debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-
> icon-theme 0.12_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main dbus-python27 0.84.0_0 exists in the ports tree
> :debug:main dbus-python27 0.84.0_0 is the latest installed
> :debug:main dbus-python27 0.84.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
> /dbus-python27
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port dbus-
> python27.
> :debug:main Requested variant +quartz is not provided by port dbus-
> python27.
> :debug:main No need to upgrade! dbus-python27 0.84.0_0 >= dbus-python27
> 0.84.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main dbus-glib 0.98_0 exists in the ports tree
> :debug:main dbus-glib 0.98_0 is the latest installed
> :debug:main dbus-glib 0.98_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
> /dbus-glib
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port dbus-glib.
> :debug:main Requested variant +quartz is not provided by port dbus-glib.
> :debug:main No need to upgrade! dbus-glib 0.98_0 >= dbus-glib 0.98_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main py27-gobject 2.26.0_2 exists in the ports tree
> :debug:main py27-gobject 2.26.0_2 is the latest installed
> :debug:main py27-gobject 2.26.0_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py27-gobject
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port
> py27-gobject.
> :debug:main Requested variant +quartz is not provided by port
> py27-gobject.
> :debug:main No need to upgrade! py27-gobject 2.26.0_2 >= py27-gobject
> 2.26.0_2
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main python27 2.7.3_0 exists in the ports tree
> :debug:main python27 2.7.3_0 is the latest installed
> :debug:main python27 2.7.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port python27.
> :debug:main Requested variant +quartz is not provided by port python27.
> :debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python_select 0.3_1 exists in the ports tree
> :debug:main python_select 0.3_1 is the latest installed
> :debug:main python_select 0.3_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port
> python_select.
> :debug:main Requested variant +quartz is not provided by port
> python_select.
> :debug:main No need to upgrade! python_select 0.3_1 >= python_select
> 0.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main py27-gdbm 2.7.3_0 exists in the ports tree
> :debug:main py27-gdbm 2.7.3_0 is the latest installed
> :debug:main py27-gdbm 2.7.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python
> /py-gdbm
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl
> :debug:main Re-registering default for build.cmd
> :debug:main Re-registering default for destroot.cmd
> :debug:main Re-registering default for destroot.destdir
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port py27-gdbm.
> :debug:main Requested variant +quartz is not provided by port py27-gdbm.
> :debug:main No need to upgrade! py27-gdbm 2.7.3_0 >= py27-gdbm 2.7.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main py27-gtk 2.22.0_1 exists in the ports tree
> :debug:main py27-gtk 2.22.0_1 is the latest installed
> :debug:main py27-gtk 2.22.0_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py27-gtk
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Requested variant +no_x11 is not provided by port py27-gtk.
> :debug:main Executing variant quartz provides quartz
> :debug:main Skipping upgrade since py27-gtk 2.22.0_1 >= py27-gtk
> 2.22.0_1, even though installed variants "" do not match "+quartz".
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main py27-cairo 1.8.10_1 exists in the ports tree
> :debug:main py27-cairo 1.8.10_1 is the latest installed
> :debug:main py27-cairo 1.8.10_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py27-cairo
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port py27-cairo.
> :debug:main Requested variant +quartz is not provided by port py27-cairo.
> :debug:main No need to upgrade! py27-cairo 1.8.10_1 >= py27-cairo
> 1.8.10_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main intltool 0.50.2_0 exists in the ports tree
> :debug:main intltool 0.50.2_0 is the latest installed
> :debug:main intltool 0.50.2_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/intltool
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant +no_x11 is not provided by port intltool.
> :debug:main Requested variant +quartz is not provided by port intltool.
> :debug:main No need to upgrade! intltool 0.50.2_0 >= intltool 0.50.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main p5.12-xml-parser 2.400.0_3 exists in the ports tree
> :debug:main p5.12-xml-parser 2.400.0_3 is the latest installed
> :debug:main p5.12-xml-parser 2.400.0_3 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
> -xml-parser
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:main Re-registering default for livecheck.version
> :debug:main Re-registering default for configure.universal_args
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port p5.12-xml-
> parser.
> :debug:main Requested variant +quartz is not provided by port p5.12-xml-
> parser.
> :debug:main No need to upgrade! p5.12-xml-parser 2.400.0_3 >= p5.12-xml-
> parser 2.400.0_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main p5.12-getopt-long 2.380.0_2 exists in the ports tree
> :debug:main p5.12-getopt-long 2.380.0_2 is the latest installed
> :debug:main p5.12-getopt-long 2.380.0_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
> -getopt-long
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:main Re-registering default for livecheck.version
> :debug:main Re-registering default for configure.universal_args
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant +no_x11 is not provided by port p5.12
> -getopt-long.
> :debug:main Requested variant +quartz is not provided by port p5.12
> -getopt-long.
> :debug:main No need to upgrade! p5.12-getopt-long 2.380.0_2 >= p5.12
> -getopt-long 2.380.0_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main p5.12-pathtools 3.330.0_2 exists in the ports tree
> :debug:main p5.12-pathtools 3.330.0_2 is the latest installed
> :debug:main p5.12-pathtools 3.330.0_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-pathtools
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:main Re-registering default for livecheck.version
> :debug:main Re-registering default for configure.universal_args
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port
> p5.12-pathtools.
> :debug:main Requested variant +quartz is not provided by port
> p5.12-pathtools.
> :debug:main No need to upgrade! p5.12-pathtools 3.330.0_2 >=
> p5.12-pathtools 3.330.0_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main p5.12-scalar-list-utils 1.230.0_2 exists in the ports tree
> :debug:main p5.12-scalar-list-utils 1.230.0_2 is the latest installed
> :debug:main p5.12-scalar-list-utils 1.230.0_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
> -scalar-list-utils
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:main Re-registering default for livecheck.version
> :debug:main Re-registering default for configure.universal_args
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port p5.12
> -scalar-list-utils.
> :debug:main Requested variant +quartz is not provided by port p5.12
> -scalar-list-utils.
> :debug:main No need to upgrade! p5.12-scalar-list-utils 1.230.0_2 >=
> p5.12-scalar-list-utils 1.230.0_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main qca 2.0.3_0 exists in the ports tree
> :debug:main qca 2.0.3_0 is the latest installed
> :debug:main qca 2.0.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/qca
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port qca.
> :debug:main Requested variant +quartz is not provided by port qca.
> :debug:main No need to upgrade! qca 2.0.3_0 >= qca 2.0.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main dbusmenu-qt 0.9.0_0 exists in the ports tree
> :debug:main dbusmenu-qt 0.9.0_0 is the latest installed
> :debug:main dbusmenu-qt 0.9.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
> /dbusmenu-qt
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Re-registering default for configure.dir
> :debug:main Re-registering default for build.dir
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port dbusmenu-
> qt.
> :debug:main Requested variant +quartz is not provided by port dbusmenu-
> qt.
> :debug:main No need to upgrade! dbusmenu-qt 0.9.0_0 >= dbusmenu-qt
> 0.9.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main qjson 0.7.1_1 exists in the ports tree
> :debug:main qjson 0.7.1_1 is the latest installed
> :debug:main qjson 0.7.1_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/qjson
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Re-registering default for configure.dir
> :debug:main Re-registering default for build.dir
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port qjson.
> :debug:main Requested variant +quartz is not provided by port qjson.
> :debug:main No need to upgrade! qjson 0.7.1_1 >= qjson 0.7.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml 5.0_0 exists in the ports tree
> :debug:main docbook-xml 5.0_0 is the latest installed
> :debug:main docbook-xml 5.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port docbook-
> xml.
> :debug:main Requested variant +quartz is not provided by port docbook-
> xml.
> :debug:main No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
> :debug:main docbook-xml-4.1.2 4.1.2_1 is the latest installed
> :debug:main docbook-xml-4.1.2 4.1.2_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.1.2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port docbook-
> xml-4.1.2.
> :debug:main Requested variant +quartz is not provided by port docbook-
> xml-4.1.2.
> :debug:main No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-
> xml-4.1.2 4.1.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xmlcatmgr 2.2_1 exists in the ports tree
> :debug:main xmlcatmgr 2.2_1 is the latest installed
> :debug:main xmlcatmgr 2.2_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/xmlcatmgr
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port xmlcatmgr.
> :debug:main Requested variant +quartz is not provided by port xmlcatmgr.
> :debug:main No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.2 4.2_0 exists in the ports tree
> :debug:main docbook-xml-4.2 4.2_0 is the latest installed
> :debug:main docbook-xml-4.2 4.2_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port docbook-
> xml-4.2.
> :debug:main Requested variant +quartz is not provided by port docbook-
> xml-4.2.
> :debug:main No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2
> 4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.3 4.3_0 exists in the ports tree
> :debug:main docbook-xml-4.3 4.3_0 is the latest installed
> :debug:main docbook-xml-4.3 4.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.3
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port docbook-
> xml-4.3.
> :debug:main Requested variant +quartz is not provided by port docbook-
> xml-4.3.
> :debug:main No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3
> 4.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.4 4.4_0 exists in the ports tree
> :debug:main docbook-xml-4.4 4.4_0 is the latest installed
> :debug:main docbook-xml-4.4 4.4_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.4
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port docbook-
> xml-4.4.
> :debug:main Requested variant +quartz is not provided by port docbook-
> xml-4.4.
> :debug:main No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4
> 4.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.5 4.5_0 exists in the ports tree
> :debug:main docbook-xml-4.5 4.5_0 is the latest installed
> :debug:main docbook-xml-4.5 4.5_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.5
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port docbook-
> xml-4.5.
> :debug:main Requested variant +quartz is not provided by port docbook-
> xml-4.5.
> :debug:main No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5
> 4.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-5.0 5.0_0 exists in the ports tree
> :debug:main docbook-xml-5.0 5.0_0 is the latest installed
> :debug:main docbook-xml-5.0 5.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-5.0
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port docbook-
> xml-5.0.
> :debug:main Requested variant +quartz is not provided by port docbook-
> xml-5.0.
> :debug:main No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0
> 5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xsl 1.76.1_1 exists in the ports tree
> :debug:main docbook-xsl 1.76.1_1 is the latest installed
> :debug:main docbook-xsl 1.76.1_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xsl
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port docbook-
> xsl.
> :debug:main Requested variant +quartz is not provided by port docbook-
> xsl.
> :debug:main No need to upgrade! docbook-xsl 1.76.1_1 >= docbook-xsl
> 1.76.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main grantlee 0.2.0_0 exists in the ports tree
> :debug:main grantlee 0.2.0_0 is the latest installed
> :debug:main grantlee 0.2.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/grantlee
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Re-registering default for configure.dir
> :debug:main Re-registering default for build.dir
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port grantlee.
> :debug:main Requested variant +quartz is not provided by port grantlee.
> :debug:main No need to upgrade! grantlee 0.2.0_0 >= grantlee 0.2.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main kerberos5 1.7.2_0 exists in the ports tree
> :debug:main kerberos5 1.7.2_0 is the latest installed
> :debug:main kerberos5 1.7.2_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/kerberos5
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Requested variant +no_x11 is not provided by port kerberos5.
> :debug:main Requested variant +quartz is not provided by port kerberos5.
> :debug:main No need to upgrade! kerberos5 1.7.2_0 >= kerberos5 1.7.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main shared-desktop-ontologies 0.9.0_0 exists in the ports tree
> :debug:main shared-desktop-ontologies 0.9.0_0 is the latest installed
> :debug:main shared-desktop-ontologies 0.9.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/kde
> /shared-desktop-ontologies
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
> :debug:main Re-registering default for configure.dir
> :debug:main Re-registering default for build.dir
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant +no_x11 is not provided by port shared-
> desktop-ontologies.
> :debug:main Requested variant +quartz is not provided by port shared-
> desktop-ontologies.
> :debug:main No need to upgrade! shared-desktop-ontologies 0.9.0_0 >=
> shared-desktop-ontologies 0.9.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xsl-ns 1.76.1_0 exists in the ports tree
> :debug:main docbook-xsl-ns 1.76.1_0 is the latest installed
> :debug:main docbook-xsl-ns 1.76.1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xsl-ns
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Requested variant +no_x11 is not provided by port docbook-
> xsl-ns.
> :debug:main Requested variant +quartz is not provided by port docbook-
> xsl-ns.
> :debug:main No need to upgrade! docbook-xsl-ns 1.76.1_0 >= docbook-xsl-ns
> 1.76.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main boost 1.49.0_0 exists in the ports tree
> :debug:main boost 1.49.0_0 +python26 is the latest installed
> :debug:main boost 1.49.0_0 +python26 is active
> :debug:main Merging existing variants '+python26' into variants
> :debug:main new fully merged portvariants: no_x11 + python26 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/boost
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port boost.
> :debug:main Requested variant +quartz is not provided by port boost.
> :debug:main Executing variant python26 provides python26
> :debug:main No need to upgrade! boost 1.49.0_0 >= boost 1.49.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main icu 4.8.1_0 exists in the ports tree
> :debug:main icu 4.8.1_0 is the latest installed
> :debug:main icu 4.8.1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port icu.
> :debug:main Requested variant +quartz is not provided by port icu.
> :debug:main No need to upgrade! icu 4.8.1_0 >= icu 4.8.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python26 2.6.8_0 exists in the ports tree
> :debug:main python26 2.6.8_0 is the latest installed
> :debug:main python26 2.6.8_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: no_x11 + quartz +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python26
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Requested variant +no_x11 is not provided by port python26.
> :debug:main Requested variant +quartz is not provided by port python26.
> :debug:main No need to upgrade! python26 2.6.8_0 >= python26 2.6.8_0
> :msg:main ---> Computing dependencies for kdevplatform:info:main
> .:debug:main kdevplatform has no conflicts
> :debug:main Searching for dependency: cmake
> :debug:main Found Dependency: receipt exists for cmake
> :debug:main Searching for dependency: pkgconfig
> :debug:main Found Dependency: receipt exists for pkgconfig
> :debug:main Searching for dependency: automoc
> :debug:main Found Dependency: receipt exists for automoc
> :debug:main Searching for dependency: qt4-mac
> :debug:main Found Dependency: receipt exists for qt4-mac
> :debug:main Searching for dependency: phonon
> :debug:main Found Dependency: receipt exists for phonon
> :debug:main Searching for dependency: kdelibs4
> :debug:main Found Dependency: receipt exists for kdelibs4
> :debug:main Searching for dependency: boost
> :debug:main Found Dependency: receipt exists for boost
> :msg:main
> :debug:main Executing org.macports.main (kdevplatform)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 501
> :debug:main euid changed to: 502
> :debug:main Skipping completed org.macports.archivefetch (kdevplatform)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.fetch (kdevplatform)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.checksum (kdevplatform)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.extract (kdevplatform)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.patch (kdevplatform)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.configure (kdevplatform)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:build build phase started at Sun May 20 21:15:02 EDT 2012
> :notice:build ---> Building kdevplatform
> :debug:build Executing org.macports.build (kdevplatform)
> :debug:build Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/.CC_PRINT_OPTIONS'
> QTDIR='/opt/local' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.7' QMAKESPEC='macx-g++'
> MOC='/opt/local/bin/moc' QMAKE='/opt/local/bin/qmake'
> :debug:build Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build"
> && /usr/bin/make -w all'
> :debug:build Executing command line: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build"
> && /usr/bin/make -w all
> :info:build make: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build /opt/local/bin/cmake
> -H/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
> -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
> --check-build-system CMakeFiles/Makefile.cmake 0
> :info:build /opt/local/bin/cmake -E cmake_progress_start
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles/progress.marks
> :info:build /usr/bin/make -f CMakeFiles/Makefile2 all
> :info:build make[1]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build /usr/bin/make -f
> sublime/CMakeFiles/sublime_automoc.dir/build.make
> sublime/CMakeFiles/sublime_automoc.dir/depend
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build cd
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
> && /opt/local/bin/cmake -E cmake_depends "Unix Makefiles"
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/CMakeFiles/sublime_automoc.dir/DependInfo.cmake
> --color=
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build /usr/bin/make -f
> sublime/CMakeFiles/sublime_automoc.dir/build.make
> sublime/CMakeFiles/sublime_automoc.dir/build
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build cd
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime
> && /opt/local/bin/automoc4
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/sublime_automoc.cpp
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime
> /opt/local/bin/moc /opt/local/bin/cmake
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build /opt/local/bin/cmake -E cmake_progress_report
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles
> :info:build [ 0%] Built target sublime_automoc
> :info:build /usr/bin/make -f sublime/CMakeFiles/sublime.dir/build.make
> sublime/CMakeFiles/sublime.dir/depend
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build cd
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
> && /opt/local/bin/cmake -E cmake_depends "Unix Makefiles"
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/CMakeFiles/sublime.dir/DependInfo.cmake
> --color=
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build /usr/bin/make -f sublime/CMakeFiles/sublime.dir/build.make
> sublime/CMakeFiles/sublime.dir/build
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build make[2]: Nothing to be done for
> `sublime/CMakeFiles/sublime.dir/build'.
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build /opt/local/bin/cmake -E cmake_progress_report
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles
> 98
> :info:build [ 1%] Built target sublime
> :info:build /usr/bin/make -f
> sublime/examples/CMakeFiles/example1_automoc.dir/build.make
> sublime/examples/CMakeFiles/example1_automoc.dir/depend
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build cd
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
> && /opt/local/bin/cmake -E cmake_depends "Unix Makefiles"
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime/examples
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples/CMakeFiles/example1_automoc.dir/DependInfo.cmake
> --color=
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build /usr/bin/make -f
> sublime/examples/CMakeFiles/example1_automoc.dir/build.make
> sublime/examples/CMakeFiles/example1_automoc.dir/build
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build cd
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
> && /opt/local/bin/automoc4
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples/example1_automoc.cpp
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime/examples
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
> /opt/local/bin/moc /opt/local/bin/cmake
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build /opt/local/bin/cmake -E cmake_progress_report
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles
> :info:build [ 1%] Built target example1_automoc
> :info:build /usr/bin/make -f
> sublime/examples/CMakeFiles/example1.dir/build.make
> sublime/examples/CMakeFiles/example1.dir/depend
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build cd
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
> && /opt/local/bin/cmake -E cmake_depends "Unix Makefiles"
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime/examples
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples/CMakeFiles/example1.dir/DependInfo.cmake
> --color=
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build /usr/bin/make -f
> sublime/examples/CMakeFiles/example1.dir/build.make
> sublime/examples/CMakeFiles/example1.dir/build
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build Linking CXX executable example1.app/Contents/MacOS/example1
> :info:build cd
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
> && /opt/local/bin/cmake -E cmake_link_script
> CMakeFiles/example1.dir/link.txt --verbose=1
> :info:build /usr/bin/llvm-g++-4.2 -pipe -O2 -arch x86_64 -fno-common
> -Woverloaded-virtual -fvisibility=hidden -Werror=return-type
> -fvisibility-inlines-hidden -O2 -DNDEBUG -DQT_NO_DEBUG -arch x86_64
> -isysroot / -mmacosx-version-min=10.7 -Wl,-search_paths_first
> -Wl,-headerpad_max_install_names -arch x86_64
> CMakeFiles/example1.dir/example1_automoc.o
> CMakeFiles/example1.dir/example1main.o CMakeFiles/example1.dir/example1.o
> -o example1.app/Contents/MacOS/example1
> /opt/local/lib/libkdeui.5.8.0.dylib /opt/local/lib/libkparts.4.8.0.dylib
> ../../lib/libsublime.5.0.0.dylib /opt/local/lib/libkparts.4.8.0.dylib
> /opt/local/lib/libkio.5.8.0.dylib /opt/local/lib/libQtNetwork.dylib
> /opt/local/lib/libQtXml.dylib /opt/local/lib/libnepomukutils.4.8.0.dylib
> /opt/local/lib/libnepomuk.4.8.0.dylib /opt/local/lib/libkdeui.5.8.0.dylib
> /opt/local/lib/libQtGui.dylib /opt/local/lib/libQtSvg.dylib
> /opt/local/lib/libkdecore.5.8.0.dylib /opt/local/lib/libQtCore.dylib
> /opt/local/lib/libQtDBus.dylib -framework Carbon
> /opt/local/lib/libsoprano.dylib
> :info:build Undefined symbols for architecture x86_64:
> :info:build "Sublime::Controller::Controller(QObject*)", referenced
> from:
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build "Sublime::UrlDocument::UrlDocument(Sublime::Controller*,
> KUrl const&)", referenced from:
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build "Sublime::ToolDocument::ToolDocument(QString const&,
> Sublime::Controller*, Sublime::ToolFactory*)", referenced from:
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build "Sublime::Area::Area(Sublime::Controller*, QString const&,
> QString const&)", referenced from:
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build "Sublime::Controller::addDefaultArea(Sublime::Area*)",
> referenced from:
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build "Sublime::Document::createView()", referenced from:
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build "Sublime::Area::addView(Sublime::View*, Sublime::View*)",
> referenced from:
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build "Sublime::Area::addToolView(Sublime::View*,
> Sublime::Position)", referenced from:
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build "Sublime::Area::addView(Sublime::View*, Sublime::View*,
> Qt::Orientation)", referenced from:
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build Example1Main::Example1Main()in example1main.o
> :info:build "Sublime::MainWindow::staticMetaObject", referenced from:
> :info:build Example1Main::updateTitle(Sublime::Area*) in
> example1main.o
> :info:build "Sublime::MainWindow::MainWindow(Sublime::Controller*,
> QFlags<Qt::WindowType>)", referenced from:
> :info:build Example1Main::selectArea2() in example1main.o
> :info:build Example1Main::selectArea1() in example1main.o
> :info:build "Sublime::Controller::showArea(Sublime::Area*,
> Sublime::MainWindow*)", referenced from:
> :info:build Example1Main::selectArea2() in example1main.o
> :info:build Example1Main::selectArea1() in example1main.o
> :info:build ld: symbol(s) not found for architecture x86_64
> :info:build collect2: ld returned 1 exit status
> :info:build make[2]: ***
> [sublime/examples/example1.app/Contents/MacOS/example1] Error 1
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build make[1]: *** [sublime/examples/CMakeFiles/example1.dir/all]
> Error 2
> :info:build make[1]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build make: *** [all] Error 2
> :info:build make: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
> :info:build Command failed: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build"
> && /usr/bin/make -w all
> :info:build Exit code: 2
> :error:build org.macports.build for port kdevplatform returned: command
> execution failed
> :debug:build Error code: CHILDSTATUS 94391 2
> :debug:build Backtrace: command execution failed
> while executing
> "system -nice 0 $fullcmdstring"
> ("eval" body line 1)
> invoked from within
> "eval system $notty $nice \$fullcmdstring"
> invoked from within
> "command_exec build"
> (procedure "portbuild::build_main" line 8)
> invoked from within
> "$procedure $targetname"
> :info:build Warning: targets not executed for kdevplatform:
> org.macports.activate org.macports.build org.macports.destroot
> org.macports.install
> :notice:build Please see the log file for port kdevplatform for details:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/main.log
> }}}
New description:
--
Comment(by macsforever2000@…):
Done.
--
Ticket URL: <https://trac.macports.org/ticket/34545#comment:7>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list