[MacPorts] #33648: libzzip: configure fails (was: lizzip fails to install)
MacPorts
noreply at macports.org
Fri Mar 16 07:57:53 PDT 2012
#33648: libzzip: configure fails
----------------------------------------+-----------------------------------
Reporter: alexey.petruchik@… | Owner: jmr@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.0.4
Keywords: | Port: libzzip
----------------------------------------+-----------------------------------
Changes (by ryandesign@…):
* cc: ryandesign@… (added)
* owner: macports-tickets@… => jmr@…
* port: => libzzip
Old description:
> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main pkgconfig 0.26_1 exists in the ports tree
> :debug:main pkgconfig 0.26_1 is the latest installed
> :debug:main pkgconfig 0.26_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! pkgconfig 0.26_1 >= pkgconfig 0.26_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main glib2 2.30.3_0 exists in the ports tree
> :debug:main glib2 2.30.3_0 +universal is the latest installed
> :debug:main glib2 2.30.3_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! glib2 2.30.3_0 >= glib2 2.30.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2 is the latest installed
> :debug:main gettext 0.18.1.1_2 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.14_0 exists in the ports tree
> :debug:main libiconv 1.14_0 is the latest installed
> :debug:main libiconv 1.14_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.9_1 exists in the ports tree
> :debug:main ncurses 5.9_1 is the latest installed
> :debug:main ncurses 5.9_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.0.1_1 exists in the ports tree
> :debug:main expat 2.0.1_1 is the latest installed
> :debug:main expat 2.0.1_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.6_0 exists in the ports tree
> :debug:main zlib 1.2.6_0 is the latest installed
> :debug:main zlib 1.2.6_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! zlib 1.2.6_0 >= zlib 1.2.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libffi 3.0.10_2 exists in the ports tree
> :debug:main libffi 3.0.10_2 is the latest installed
> :debug:main libffi 3.0.10_2 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5 5.12.3_1 exists in the ports tree
> :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
> :debug:main perl5 5.12.3_1 +perl5_12 is active
> :debug:main Merging existing variants '+perl5_12' into variants
> :debug:main new fully merged portvariants: perl5_12 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Executing variant perl5_12 provides perl5_12
> :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5.12 5.12.3_3 exists in the ports tree
> :debug:main perl5.12 5.12.3_3 is the latest installed
> :debug:main perl5.12 5.12.3_3 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gdbm 1.10_1 exists in the ports tree
> :debug:main gdbm 1.10_1 is the latest installed
> :debug:main gdbm 1.10_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xmlto 0.0.25_0 exists in the ports tree
> :debug:main xmlto 0.0.25_0 is the latest installed
> :debug:main xmlto 0.0.25_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/xmlto
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xmlto 0.0.25_0 >= xmlto 0.0.25_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main coreutils 8.15_0 exists in the ports tree
> :debug:main coreutils 8.15_0 is the latest installed
> :debug:main coreutils 8.15_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/coreutils
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! coreutils 8.15_0 >= coreutils 8.15_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gmp 5.0.4_0 exists in the ports tree
> :debug:main gmp 5.0.4_0 +universal is the latest installed
> :debug:main gmp 5.0.4_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmp
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! gmp 5.0.4_0 >= gmp 5.0.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main findutils 4.4.2_1 exists in the ports tree
> :debug:main findutils 4.4.2_1 is the latest installed
> :debug:main findutils 4.4.2_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/findutils
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! findutils 4.4.2_1 >= findutils 4.4.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main getopt 1.1.4_1 exists in the ports tree
> :debug:main getopt 1.1.4_1 is the latest installed
> :debug:main getopt 1.1.4_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/getopt
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! getopt 1.1.4_1 >= getopt 1.1.4_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpaper 1.1.24_0 exists in the ports tree
> :debug:main libpaper 1.1.24_0 is the latest installed
> :debug:main libpaper 1.1.24_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/libpaper
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libpaper 1.1.24_0 >= libpaper 1.1.24_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libxml2 2.7.8_0 exists in the ports tree
> :debug:main libxml2 2.7.8_0 +universal is the latest installed
> :debug:main libxml2 2.7.8_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libxslt 1.1.26_0 exists in the ports tree
> :debug:main libxslt 1.1.26_0 is the latest installed
> :debug:main libxslt 1.1.26_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxslt
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml 5.0_0 exists in the ports tree
> :debug:main docbook-xml 5.0_0 is the latest installed
> :debug:main docbook-xml 5.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
> :debug:main docbook-xml-4.1.2 4.1.2_1 is the latest installed
> :debug:main docbook-xml-4.1.2 4.1.2_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.1.2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-
> xml-4.1.2 4.1.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xmlcatmgr 2.2_1 exists in the ports tree
> :debug:main xmlcatmgr 2.2_1 is the latest installed
> :debug:main xmlcatmgr 2.2_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/xmlcatmgr
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.2 4.2_0 exists in the ports tree
> :debug:main docbook-xml-4.2 4.2_0 is the latest installed
> :debug:main docbook-xml-4.2 4.2_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.2
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2
> 4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.3 4.3_0 exists in the ports tree
> :debug:main docbook-xml-4.3 4.3_0 is the latest installed
> :debug:main docbook-xml-4.3 4.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.3
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3
> 4.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.4 4.4_0 exists in the ports tree
> :debug:main docbook-xml-4.4 4.4_0 is the latest installed
> :debug:main docbook-xml-4.4 4.4_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.4
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4
> 4.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-4.5 4.5_0 exists in the ports tree
> :debug:main docbook-xml-4.5 4.5_0 is the latest installed
> :debug:main docbook-xml-4.5 4.5_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-4.5
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5
> 4.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xml-5.0 5.0_0 exists in the ports tree
> :debug:main docbook-xml-5.0 5.0_0 is the latest installed
> :debug:main docbook-xml-5.0 5.0_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xml-5.0
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0
> 5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main docbook-xsl 1.76.1_0 exists in the ports tree
> :debug:main docbook-xsl 1.76.1_0 is the latest installed
> :debug:main docbook-xsl 1.76.1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
> /docbook-xsl
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! docbook-xsl 1.76.1_0 >= docbook-xsl
> 1.76.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main fop 1.0_1 exists in the ports tree
> :debug:main fop 1.0_1 is the latest installed
> :debug:main fop 1.0_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/fop
> :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! fop 1.0_1 >= fop 1.0_1
> :msg:main ---> Computing dependencies for libzzip:info:main .:debug:main
> Searching for dependency: pkgconfig
> :debug:main Found Dependency: receipt exists for pkgconfig
> :debug:main Searching for dependency: xmlto
> :debug:main Found Dependency: receipt exists for xmlto
> :debug:main Searching for dependency: zlib
> :debug:main Found Dependency: receipt exists for zlib
> :msg:main
> :debug:main Executing org.macports.main (libzzip)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 501
> :debug:main euid changed to: 502
> :debug:main Skipping completed org.macports.archivefetch (libzzip)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.fetch (libzzip)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.checksum (libzzip)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.extract (libzzip)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.patch (libzzip)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:configure configure phase started at Fri Mar 16 16:02:08 FET 2012
> :notice:configure ---> Configuring libzzip
> :debug:configure Using compiler 'Mac OS X clang'
> :debug:configure Executing org.macports.configure (libzzip)
> :debug:configure Environment: CPATH='/opt/local/include'
> ac_cv_path_PAX=':' CFLAGS='-pipe -O2 -arch x86_64 -arch i386'
> CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64 -arch
> i386' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.7'
> CXX='/usr/bin/clang++'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_archivers_libzzip/libzzip/work/.CC_PRINT_OPTIONS'
> F90FLAGS='-pipe -O2' LDFLAGS='-L/opt/local/lib -arch x86_64 -arch i386'
> FCFLAGS='-pipe -O2' OBJC='/usr/bin/clang' GI_SCANNER_DISABLE_CACHE='1'
> INSTALL='/usr/bin/install -c' PYTHON='/usr/bin/python' OBJCFLAGS='-pipe
> -O2 -arch x86_64 -arch i386' FFLAGS='-pipe -O2' CC_PRINT_OPTIONS='YES'
> CC='/usr/bin/clang'
> :debug:configure Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_archivers_libzzip/libzzip/work/zziplib-0.13.62"
> && ./configure --prefix=/opt/local --disable-dependency-tracking'
> :debug:configure Executing command line: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_archivers_libzzip/libzzip/work/zziplib-0.13.62"
> && ./configure --prefix=/opt/local --disable-dependency-tracking
> :info:configure checking build system type... i386-apple-darwin11.3.0
> :info:configure checking host system type... i386-apple-darwin11.3.0
> :info:configure checking target system type... i386-apple-darwin11.3.0
> :info:configure continue configure in default builddir
> "./Darwin_11.3.0_x86_64.d"
> :info:configure ....exec /bin/sh ".././configure" "--srcdir=.."
> "--enable-builddir=Darwin_11.3.0_x86_64.d" '--prefix=/opt/local'
> '--disable-dependency-tracking' 'CC=/usr/bin/clang' 'CFLAGS=-pipe -O2
> -arch x86_64 -arch i386' 'LDFLAGS=-L/opt/local/lib -arch x86_64 -arch
> i386' 'CPPFLAGS=-I/opt/local/include'
> :info:configure checking build system type... i386-apple-darwin11.3.0
> :info:configure checking host system type... i386-apple-darwin11.3.0
> :info:configure checking target system type... i386-apple-darwin11.3.0
> :info:configure checking for gsed... sed
> :info:configure checking default prefix system... is /opt-package
> :info:configure ...using thread-safe linkage
> :info:configure checking zlib install prefix... none
> :info:configure checking rpm spec file... ../zziplib.spec
> :info:configure checking for spec package... zziplib
> :info:configure checking for spec version... 0.13.62
> :info:configure checking for spec license type... LGPLv2.1+
> :info:configure checking for spec summary... ZZipLib - libZ-based ZIP-
> access Library with an Easy-to-Use API
> :info:configure checking for spec category... System/Libraries
> :info:configure checking for spec icon... zziplib-icon.png (fallback)
> :info:configure checking for a BSD-compatible install... /usr/bin/install
> -c
> :info:configure checking whether build environment is sane... yes
> :info:configure checking for a thread-safe mkdir -p...
> /opt/local/bin/gmkdir -p
> :info:configure checking for gawk... no
> :info:configure checking for mawk... no
> :info:configure checking for nawk... no
> :info:configure checking for awk... awk
> :info:configure checking whether make sets $(MAKE)... yes
> :info:configure checking for gcc... /usr/bin/clang
> :info:configure checking whether the C compiler works... yes
> :info:configure checking for C compiler default output file name... a.out
> :info:configure checking for suffix of executables...
> :info:configure checking whether we are cross compiling... no
> :info:configure checking for suffix of object files... o
> :info:configure checking whether we are using the GNU C compiler... yes
> :info:configure checking whether /usr/bin/clang accepts -g... yes
> :info:configure checking for /usr/bin/clang option to accept ISO C89...
> none needed
> :info:configure checking for style of include used by make... GNU
> :info:configure checking dependency style of /usr/bin/clang... none
> :info:configure checking for a sed that does not truncate output...
> /usr/bin/sed
> :info:configure checking for grep that handles long lines and -e...
> /usr/bin/grep
> :info:configure checking for egrep... /usr/bin/grep -E
> :info:configure checking for fgrep... /usr/bin/grep -F
> :info:configure checking for ld used by /usr/bin/clang... /usr/bin/ld
> :info:configure checking if the linker (/usr/bin/ld) is GNU ld... no
> :info:configure checking for BSD- or MS-compatible name lister (nm)...
> /usr/bin/nm
> :info:configure checking the name lister (/usr/bin/nm) interface... BSD
> nm
> :info:configure checking whether ln -s works... yes
> :info:configure checking the maximum length of command line arguments...
> 196608
> :info:configure checking whether the shell understands some XSI
> constructs... yes
> :info:configure checking whether the shell understands "+="... yes
> :info:configure checking for /usr/bin/ld option to reload object files...
> -r
> :info:configure checking for objdump... objdump
> :info:configure checking how to recognize dependent libraries... pass_all
> :info:configure checking for ar... ar
> :info:configure checking for strip... strip
> :info:configure checking for ranlib... ranlib
> :info:configure checking command to parse /usr/bin/nm output from
> /usr/bin/clang object... ok
> :info:configure checking for dsymutil... dsymutil
> :info:configure checking for nmedit... nmedit
> :info:configure checking for lipo... lipo
> :info:configure checking for otool... otool
> :info:configure checking for otool64... no
> :info:configure checking for -single_module linker flag... yes
> :info:configure checking for -exported_symbols_list linker flag... yes
> :info:configure checking how to run the C preprocessor... /usr/bin/clang
> -E
> :info:configure checking for ANSI C header files... yes
> :info:configure checking for sys/types.h... yes
> :info:configure checking for sys/stat.h... yes
> :info:configure checking for stdlib.h... yes
> :info:configure checking for string.h... yes
> :info:configure checking for memory.h... yes
> :info:configure checking for strings.h... yes
> :info:configure checking for inttypes.h... yes
> :info:configure checking for stdint.h... yes
> :info:configure checking for unistd.h... yes
> :info:configure checking for dlfcn.h... yes
> :info:configure checking for objdir... .libs
> :info:configure checking if /usr/bin/clang supports -fno-rtti -fno-
> exceptions... yes
> :info:configure checking for /usr/bin/clang option to produce PIC...
> -fno-common -DPIC
> :info:configure checking if /usr/bin/clang PIC flag -fno-common -DPIC
> works... yes
> :info:configure checking if /usr/bin/clang static flag -static works...
> no
> :info:configure checking if /usr/bin/clang supports -c -o file.o... yes
> :info:configure checking if /usr/bin/clang supports -c -o file.o...
> (cached) yes
> :info:configure checking whether the /usr/bin/clang linker (/usr/bin/ld)
> supports shared libraries... yes
> :info:configure checking dynamic linker characteristics... darwin11.3.0
> dyld
> :info:configure checking how to hardcode library paths into programs...
> immediate
> :info:configure checking whether stripping libraries is possible... yes
> :info:configure checking if libtool supports shared libraries... yes
> :info:configure checking whether to build shared libraries... yes
> :info:configure checking whether to build static libraries... yes
> :info:configure checking out linker version info 0.13.62 ... /0/13:62
> (-0.so.13.0.62)
> :info:configure creating zzip/_msvc.in via zzip/_msvc.sed of config.h.in
> :info:configure checking whether to enable maintainer-specific portions
> of Makefiles... no
> :info:configure checking our pkgconfig libname... zziplib
> :info:configure checking our pkgconfig version... 0.13.62
> :info:configure checking our pkgconfig_libdir... ${libdir}/pkgconfig
> :info:configure expanded our pkgconfig_libdir... /opt/local/lib/pkgconfig
> :info:configure checking our pkgconfig_libfile... zziplib.pc
> :info:configure checking our package / suffix... zziplib /
> :info:configure checking our pkgconfig description... ZZipLib - libZ-
> based ZIP-access Library with an Easy-to-Use API
> :info:configure checking our pkgconfig requires... zzip-zlib-config
> :info:configure checking our pkgconfig ext libs... -lzzip
> :info:configure checking our pkgconfig cppflags... -I/opt/local/include
> :info:configure checking our pkgconfig ldflags... -L/opt/local/lib -arch
> x86_64 -arch i386
> :info:configure generate the pkgconfig later... zzip/zziplib.pc
> :info:configure noninstalled pkgconfig -L
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_archivers_libzzip/libzzip/work/zziplib-0.13.62/Darwin_11.3.0_x86_64.d/zzip/.libs
> :info:configure noninstalled pkgconfig -I
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_archivers_libzzip/libzzip/work/zziplib-0.13.62/Darwin_11.3.0_x86_64.d/..
> :info:configure checking for pax... (cached) :
> :info:configure checking for gnutar... /usr/bin/gnutar
> :info:configure checking for portable tar tool... gnutar
> :info:configure checking for command to create portable tar archives...
> '/usr/bin/gnutar' cf
> :info:configure checking for command to extract portable tar archives...
> '/usr/bin/gnutar' xf
> :info:configure checking for perl5... /opt/local/bin/perl5
> :info:configure checking for python... /usr/bin/python
> :info:configure checking for zip... /usr/bin/zip
> :info:configure checking for xmlto... /opt/local/bin/xmlto
> :info:configure checking for inline... inline
> :info:configure checking for an ANSI C-conforming const... yes
> :info:configure checking for C restrict keyword... restrict
> :info:configure checking for ANSI C header files... (cached) yes
> :info:configure checking for dirent.h that defines DIR... yes
> :info:configure checking for library containing opendir... none required
> :info:configure checking for stdint.h... (cached) yes
> :info:configure checking for unistd.h... (cached) yes
> :info:configure checking windows.h usability... no
> :info:configure checking windows.h presence... no
> :info:configure checking for windows.h... no
> :info:configure checking winnt.h usability... no
> :info:configure checking winnt.h presence... no
> :info:configure checking for winnt.h... no
> :info:configure checking winbase.h usability... no
> :info:configure checking winbase.h presence... no
> :info:configure checking for winbase.h... no
> :info:configure checking sys/int_types.h usability... no
> :info:configure checking sys/int_types.h presence... no
> :info:configure checking for sys/int_types.h... no
> :info:configure checking for sys/types.h... (cached) yes
> :info:configure checking sys/mman.h usability... yes
> :info:configure checking sys/mman.h presence... yes
> :info:configure checking for sys/mman.h... yes
> :info:configure checking for sys/stat.h... (cached) yes
> :info:configure checking sys/param.h usability... yes
> :info:configure checking sys/param.h presence... yes
> :info:configure checking for sys/param.h... yes
> :info:configure checking io.h usability... no
> :info:configure checking io.h presence... no
> :info:configure checking for io.h... no
> :info:configure checking direct.h usability... no
> :info:configure checking direct.h presence... no
> :info:configure checking for direct.h... no
> :info:configure checking zlib.h usability... yes
> :info:configure checking zlib.h presence... yes
> :info:configure checking for zlib.h... yes
> :info:configure checking byteswap.h usability... no
> :info:configure checking byteswap.h presence... no
> :info:configure checking for byteswap.h... no
> :info:configure checking fnmatch.h usability... yes
> :info:configure checking fnmatch.h presence... yes
> :info:configure checking for fnmatch.h... yes
> :info:configure checking for strcasecmp... yes
> :info:configure checking for strndup... yes
> :info:configure checking for off_t... yes
> :info:configure checking for size_t... yes
> :info:configure checking for ssize_t... yes
> :info:configure checking for off64_t... no
> :info:configure checking for __int64... no
> :info:configure checking size of short... 2
> :info:configure checking size of int... 4
> :info:configure checking size of long... configure: error: cannot
> determine a size for long
> :info:configure shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_archivers_libzzip/libzzip/work/zziplib-0.13.62"
> && ./configure --prefix=/opt/local --disable-dependency-tracking "
> returned error 1
> :error:configure Target org.macports.configure returned: configure
> failure: shell command failed (see log for details)
> :debug:configure Backtrace: configure failure: shell command failed (see
> log for details)
> while executing
> "$procedure $targetname"
> :info:configure Warning: the following items did not execute (for
> libzzip): org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> :notice:configure Log for libzzip is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_archivers_libzzip/libzzip/main.log
New description:
(description removed by admin; it was identical to the attached main.log)
--
Comment:
The log says:
{{{
:info:configure checking size of long... configure: error: cannot
determine a size for long
}}}
Joshua, I assume at least part of the configure patches you removed in
r90863 are still needed...
--
Ticket URL: <https://trac.macports.org/ticket/33648#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list