[MacPorts] #33846: I don't install gedit

Sat Mar 31 16:05:34 PDT 2012

#33846: I don't install gedit
----------------------------+-----------------------------------------------
 Reporter:  amatasc@…       |       Owner:  macports-tickets@…                   
     Type:  defect          |      Status:  new                                  
 Priority:  Normal          |   Milestone:                                       
Component:  ports           |     Version:  2.0.4                                
 Keywords:                  |        Port:                                       
----------------------------+-----------------------------------------------
 amatasc:~ amatasc$ sudo port -v selfupdate
 Password:
 Warning: xcodebuild exists but failed to execute
 --->  Updating MacPorts base sources using rsync
 receiving file list ... done
 base.tar

 sent 10894 bytes  received 111 bytes  3144.29 bytes/sec
 total size is 3236352  speedup is 294.08
 receiving file list ... done
 base.tar.rmd160

 sent 64 bytes  received 116 bytes  72.00 bytes/sec
 total size is 512  speedup is 2.84
 MacPorts base version 2.0.4 installed,
 MacPorts base version 2.0.4 downloaded.
 --->  Updating the ports tree
 Synchronizing local ports tree from
 rsync://rsync.macports.org/release/tarballs/ports.tar
 receiving file list ... done
 ports.tar

 sent 49548 bytes  received 1468 bytes  6001.88 bytes/sec
 total size is 49940992  speedup is 978.93
 receiving file list ... done
 ports.tar.rmd160

 sent 64 bytes  received 636 bytes  280.00 bytes/sec
 total size is 512  speedup is 0.73
 Warning: xcodebuild exists but failed to execute
 Creating port index in
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports

 Total number of ports parsed:   0
 Ports successfully parsed:      0
 Ports failed:                   0
 Up-to-date ports skipped:       13779

 --->  MacPorts base is already the latest version

 The ports tree has been updated. To upgrade your installed ports, you
 should run
   port upgrade outdated
 amatasc:~ amatasc$ port upgrade outdated
 Error: No ports matched the given expression
 amatasc:~ amatasc$ sudo port upgrade outdated
 Warning: xcodebuild exists but failed to execute
 Error: No ports matched the given expression
 amatasc:~ amatasc$ port
 MacPorts 2.0.4
 Entering interactive mode... ("help" for help, "quit" to quit)
 [Users/amatasc] > help
 port
         [-bcdfknopqRstuvy] [-D portdir] [-F cmdfile] action [privopts]
 [actionflags]
         [[portname|pseudo-portname|port-url] [@version] [+-variant]...
 [option=value]...]...

 Supported actions
 ------------------
 activate, archive, archivefetch, build, cat, cd, checksum, clean,
 configure,
 contents, deactivate, dependents, deps, destroot, dir, distcheck,
 distfiles,
 dmg, dpkg, echo, ed, edit, exit, extract, fetch, file, gohome, help,
 info, install, installed, lint, list, livecheck, load, location, log,
 logfile, mdmg, mirror, mpkg, notes, outdated, patch, pkg, platform,
 portpkg, provides, quit, rdependents, rdeps, rpm, search, select,
 selfupdate,
 setrequested, space, srpm, submit, sync, test, unarchive, uninstall,
 unload, unsetrequested, upgrade, url, usage, variants, version, work

 Pseudo-portnames
 ----------------
 Pseudo-portnames are words that may be used in place of a portname, and
 which expand to some set of ports. The common pseudo-portnames are:
 all, current, active, inactive, actinact, installed, uninstalled,
 outdated,
 obsolete, requested, unrequested and leaves.
 These pseudo-portnames expand to the set of ports named.

 Pseudo-portnames starting with variants:, variant:, description:,
 depends:,
 depends_lib:, depends_run:, depends_build:, depends_fetch:,
 depends_extract:,
 portdir:, homepage:, epoch:, platforms:, platform:, name:,
 long_description:,
 maintainers:, maintainer:, categories:, category:, version:, revision:,
 and
 license: each select a set of ports based on a regex search of metadata
 about the ports. In all such cases, a standard regex pattern following
 the colon will be used to select the set of ports to which the
 pseudo-portname expands.

 Pseudo-portnames starting with depof:, rdepof:, dependentof:, and
 rdependentof:
 select ports that are direct or recursive dependencies or dependents of
 the
 following portname, respectively.

 Portnames that contain standard glob characters will be expanded to the
 set of ports matching the glob pattern.

 Port expressions
 ----------------
 Portnames, port glob patterns, and pseudo-portnames may be logically
 combined using expressions consisting of and, or, not, !, (, and ).

 For more information
 --------------------
 See man pages: port(1), macports.conf(5), portfile(7), portgroup(7),
 porthier(7), portstyle(7). Also, see http://www.macports.org.

 [Users/amatasc] > quit
 Goodbye
 amatasc:~ amatasc$ sudo port install gedit
 Warning: xcodebuild exists but failed to execute
 Warning: Xcode appears to be installed but xcodebuild is unusable; some
 ports will likely fail to build.
 Warning: You may need to run `sudo xcode-select -switch
 /Applications/Xcode.app`
 --->  Computing dependencies for gedit
 --->  Dependencies to be installed: enchant aspell gettext expat expat
 libiconv gperf ncurses ncursesw gettext texinfo xz glib2 libffi perl5
 perl5.12 gdbm perl5.12 perl5 perl5 zlib glib2 hunspell readline pkgconfig
 pkgconfig pkgconfig gconf dbus-glib dbus gtk-doc docbook-xml docbook-
 xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4
 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl docbook-xsl gnome-doc-utils
 intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-list-
 utils p5.12-xml-parser intltool iso-codes iso-codes libxslt libxml2
 libxml2 libxslt py27-libxml2 python27 bzip2 db46 libedit openssl
 python_select sqlite3 python27 rarian getopt rarian gnome-doc-utils gtk2
 atk gdk-pixbuf2 jasper jpeg libpng tiff hicolor-icon-theme pango Xft2
 fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto xorg-inputproto
 xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-libxcb xorg-
 libpthread-stubs xorg-xcb-proto xorg-xcmiscproto xorg-xextproto xorg-
 xf86bigfontproto xorg-xtrans xorg-renderproto cairo libpixman xorg-xcb-
 util shared-mime-info xorg-libXcomposite xorg-compositeproto xorg-libXext
 autoconf help2man p5.12-locale-gettext m4 autoconf automake libtool xorg-
 util-macros xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage
 xorg-damageproto xorg-libXi xorg-libXinerama xorg-xineramaproto xorg-
 libXrandr xorg-randrproto orbit2 libidl policykit eggdbus
 py27-pygtksourceview gtksourceview2 py27-gobject py27-gtk libglade2
 py27-cairo py27-numpy fftw-3 py27-nose nosetests_select py27-distribute
 py27-py xorg-libsm xorg-libice
 --->  Fetching archive for expat
 --->  Attempting to fetch expat-2.0.1_1.darwin_11.x86_64.tbz2 from
 http://packages.macports.org/expat
 --->  Fetching expat
 --->  Attempting to fetch expat-2.0.1.tar.gz from
 http://lil.fr.distfiles.macports.org/expat
 --->  Verifying checksum(s) for expat
 --->  Extracting expat
 --->  Configuring expat
 --->  Building expat
 --->  Staging expat into destroot
 --->  Installing expat @2.0.1_1
 --->  Activating expat @2.0.1_1
 --->  Cleaning expat
 --->  Cleaning expat
 --->  Fetching archive for gperf
 --->  Attempting to fetch gperf-3.0.4_2.darwin_11.x86_64.tbz2 from
 http://packages.macports.org/gperf
 --->  Fetching gperf
 --->  Attempting to fetch gperf-3.0.4.tar.gz from
 http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gperf
 --->  Verifying checksum(s) for gperf
 --->  Extracting gperf
 --->  Applying patches to gperf
 --->  Configuring gperf
 --->  Building gperf
 --->  Staging gperf into destroot
 --->  Installing gperf @3.0.4_2
 --->  Activating gperf @3.0.4_2
 --->  Cleaning gperf
 --->  Fetching archive for libiconv
 --->  Attempting to fetch libiconv-1.14_0.darwin_11.x86_64.tbz2 from
 http://packages.macports.org/libiconv
 --->  Fetching libiconv
 --->  Attempting to fetch libiconv-1.14.tar.gz from
 http://lil.fr.distfiles.macports.org/libiconv
 --->  Verifying checksum(s) for libiconv
 --->  Extracting libiconv
 --->  Applying patches to libiconv
 --->  Configuring libiconv
 --->  Building libiconv
 --->  Staging libiconv into destroot
 --->  Installing libiconv @1.14_0
 --->  Activating libiconv @1.14_0
 --->  Cleaning libiconv
 --->  Fetching archive for ncursesw
 --->  Attempting to fetch ncursesw-5.8_0.darwin_11.noarch.tbz2 from
 http://packages.macports.org/ncursesw
 --->  Fetching ncursesw
 --->  Verifying checksum(s) for ncursesw
 --->  Extracting ncursesw
 --->  Configuring ncursesw
 --->  Building ncursesw
 --->  Staging ncursesw into destroot
 --->  Installing ncursesw @5.8_0
 --->  Activating ncursesw @5.8_0
 --->  Cleaning ncursesw
 --->  Fetching archive for ncurses
 --->  Attempting to fetch ncurses-5.9_1.darwin_11.x86_64.tbz2 from
 http://packages.macports.org/ncurses
 --->  Fetching ncurses
 --->  Attempting to fetch ncurses-5.9.tar.gz from
 http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/ncurses
 --->  Verifying checksum(s) for ncurses
 --->  Extracting ncurses
 --->  Applying patches to ncurses
 --->  Configuring ncurses
 --->  Building ncurses
 --->  Staging ncurses into destroot
 --->  Installing ncurses @5.9_1
 --->  Activating ncurses @5.9_1
 --->  Cleaning ncurses
 --->  Fetching archive for gettext
 --->  Attempting to fetch gettext-0.18.1.1_2.darwin_11.x86_64.tbz2 from
 http://packages.macports.org/gettext
 --->  Fetching gettext
 --->  Attempting to fetch gettext-0.18.1.1.tar.gz from
 http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gettext
 --->  Verifying checksum(s) for gettext
 --->  Extracting gettext
 --->  Applying patches to gettext
 --->  Configuring gettext
 --->  Building gettext
 --->  Staging gettext into destroot
 --->  Installing gettext @0.18.1.1_2
 --->  Activating gettext @0.18.1.1_2
 --->  Cleaning gettext
 --->  Cleaning gettext
 --->  Fetching archive for xz
 --->  Attempting to fetch xz-5.0.3_0.darwin_11.x86_64.tbz2 from
 http://packages.macports.org/xz
 --->  Fetching xz
 --->  Attempting to fetch xz-5.0.3.tar.bz2 from
 http://lil.fr.distfiles.macports.org/xz
 --->  Verifying checksum(s) for xz
 --->  Extracting xz
 --->  Configuring xz
 --->  Building xz
 --->  Staging xz into destroot
 --->  Installing xz @5.0.3_0
 --->  Activating xz @5.0.3_0
 --->  Cleaning xz
 --->  Fetching archive for texinfo
 --->  Attempting to fetch texinfo-4.13_2.darwin_11.x86_64.tbz2 from
 http://packages.macports.org/texinfo
 --->  Fetching texinfo
 --->  Attempting to fetch texinfo-4.13.tar.lzma from
 http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/texinfo
 --->  Verifying checksum(s) for texinfo
 --->  Extracting texinfo
 --->  Configuring texinfo
 --->  Building texinfo
 --->  Staging texinfo into destroot
 --->  Installing texinfo @4.13_2
 --->  Activating texinfo @4.13_2
 --->  Cleaning texinfo
 --->  Fetching archive for aspell
 --->  Attempting to fetch aspell-0.60.6_4+nonls.darwin_11.x86_64.tbz2 from
 http://packages.macports.org/aspell
 --->  Fetching aspell
 --->  Attempting to fetch aspell-0.60.6.tar.gz from
 ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/distfiles/
 --->  Verifying checksum(s) for aspell
 --->  Extracting aspell
 --->  Applying patches to aspell
 --->  Configuring aspell
 --->  Building aspell
 Error: Target org.macports.build returned: shell command failed (see log
 for details)
 Error: Failed to install aspell
 Log for aspell is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_textproc_aspell/aspell/main.log
 Error: The following dependencies were not installed: enchant aspell glib2
 libffi perl5 perl5.12 gdbm perl5.12 perl5 perl5 zlib glib2 hunspell
 readline pkgconfig pkgconfig pkgconfig gconf dbus-glib dbus gtk-doc
 docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3
 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl docbook-xsl
 gnome-doc-utils intltool gnome-common p5.12-getopt-long p5.12-pathtools
 p5.12-scalar-list-utils p5.12-xml-parser intltool iso-codes iso-codes
 libxslt libxml2 libxml2 libxslt py27-libxml2 python27 bzip2 db46 libedit
 openssl python_select sqlite3 python27 rarian getopt rarian gnome-doc-
 utils gtk2 atk gdk-pixbuf2 jasper jpeg libpng tiff hicolor-icon-theme
 pango Xft2 fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto xorg-
 inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-libxcb
 xorg-libpthread-stubs xorg-xcb-proto xorg-xcmiscproto xorg-xextproto xorg-
 xf86bigfontproto xorg-xtrans xorg-renderproto cairo libpixman xorg-xcb-
 util shared-mime-info xorg-libXcomposite xorg-compositeproto xorg-libXext
 autoconf help2man p5.12-locale-gettext m4 autoconf automake libtool xorg-
 util-macros xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage
 xorg-damageproto xorg-libXi xorg-libXinerama xorg-xineramaproto xorg-
 libXrandr xorg-randrproto orbit2 libidl policykit eggdbus
 py27-pygtksourceview gtksourceview2 py27-gobject py27-gtk libglade2
 py27-cairo py27-numpy fftw-3 py27-nose nosetests_select py27-distribute
 py27-py xorg-libsm xorg-libice
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>
 amatasc:~ amatasc$

-- 
Ticket URL: <https://trac.macports.org/ticket/33846>
MacPorts <http://www.macports.org/>
Ports system for Mac OS