[MacPorts] #34545: Can't install kdevplatform
MacPorts
noreply at macports.org
Sun May 20 18:20:49 PDT 2012
#34545: Can't install kdevplatform
-------------------------------+--------------------------------------------
Reporter: dave@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.1.1
Keywords: | Port: kdevplatform
-------------------------------+--------------------------------------------
{{{
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main cmake 2.8.8_0 exists in the ports tree
:debug:main cmake 2.8.8_0 is the latest installed
:debug:main cmake 2.8.8_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/Users/dave/Public/MacPorts/Portfiles/devel/cmake
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port cmake.
:debug:main Requested variant +quartz is not provided by port cmake.
:debug:main No need to upgrade! cmake 2.8.8_0 >= cmake 2.8.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libidn 1.22_0 exists in the ports tree
:debug:main libidn 1.22_0 is the latest installed
:debug:main libidn 1.22_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/mail/libidn
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libidn.
:debug:main Requested variant +quartz is not provided by port libidn.
:debug:main No need to upgrade! libidn 1.22_0 >= libidn 1.22_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0 is the latest installed
:debug:main libiconv 1.14_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port libiconv.
:debug:main Requested variant +quartz is not provided by port libiconv.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 is the latest installed
:debug:main gettext 0.18.1.1_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port gettext.
:debug:main Requested variant +quartz is not provided by port gettext.
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1 is the latest installed
:debug:main ncurses 5.9_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port ncurses.
:debug:main Requested variant +quartz is not provided by port ncurses.
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.1.0_0 exists in the ports tree
:debug:main expat 2.1.0_0 is the latest installed
:debug:main expat 2.1.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port expat.
:debug:main Requested variant +quartz is not provided by port expat.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 is the latest installed
:debug:main openssl 1.0.1c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port openssl.
:debug:main Requested variant +quartz is not provided by port openssl.
:debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 is the latest installed
:debug:main zlib 1.2.7_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port zlib.
:debug:main Requested variant +quartz is not provided by port zlib.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main pkgconfig 0.26_1 exists in the ports tree
:debug:main pkgconfig 0.26_1 is the latest installed
:debug:main pkgconfig 0.26_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port pkgconfig.
:debug:main Requested variant +quartz is not provided by port pkgconfig.
:debug:main No need to upgrade! pkgconfig 0.26_1 >= pkgconfig 0.26_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main glib2 2.32.3_0 exists in the ports tree
:debug:main glib2 2.32.3_0 is the latest installed
:debug:main glib2 2.32.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port glib2.
:debug:main Requested variant +quartz is not provided by port glib2.
:debug:main No need to upgrade! glib2 2.32.3_0 >= glib2 2.32.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libffi 3.0.10_2 exists in the ports tree
:debug:main libffi 3.0.10_2 is the latest installed
:debug:main libffi 3.0.10_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port libffi.
:debug:main Requested variant +quartz is not provided by port libffi.
:debug:main No need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.3_1 exists in the ports tree
:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
:debug:main perl5 5.12.3_1 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: no_x11 + perl5_12 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port perl5.
:debug:main Requested variant +quartz is not provided by port perl5.
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.4_0 exists in the ports tree
:debug:main perl5.12 5.12.4_0 is the latest installed
:debug:main perl5.12 5.12.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port perl5.12.
:debug:main Requested variant +quartz is not provided by port perl5.12.
:debug:main No need to upgrade! perl5.12 5.12.4_0 >= perl5.12 5.12.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.10_1 exists in the ports tree
:debug:main gdbm 1.10_1 is the latest installed
:debug:main gdbm 1.10_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port gdbm.
:debug:main Requested variant +quartz is not provided by port gdbm.
:debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main automoc 0.9.88_3 exists in the ports tree
:debug:main automoc 0.9.88_3 is the latest installed
:debug:main automoc 0.9.88_3 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automoc
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port automoc.
:debug:main Requested variant +quartz is not provided by port automoc.
:debug:main No need to upgrade! automoc 0.9.88_3 >= automoc 0.9.88_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main qt4-mac 4.7.4_1 exists in the ports tree
:debug:main qt4-mac 4.7.4_1 +quartz is the latest installed
:debug:main qt4-mac 4.7.4_1 +quartz is active
:debug:main Merging existing variants '+quartz' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/aqua/qt4-mac
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port qt4-mac.
:debug:main Executing variant quartz provides quartz
:debug:main No need to upgrade! qt4-mac 4.7.4_1 >= qt4-mac 4.7.4_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbus 1.4.20_1 exists in the ports tree
:debug:main dbus 1.4.20_1 +startupitem is the latest installed
:debug:main dbus 1.4.20_1 +startupitem is active
:debug:main Merging existing variants '+startupitem' into variants
:debug:main new fully merged portvariants: no_x11 + startupitem + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port dbus.
:debug:main Requested variant +quartz is not provided by port dbus.
:debug:main Executing variant startupitem provides startupitem
:debug:main No need to upgrade! dbus 1.4.20_1 >= dbus 1.4.20_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.12_0 exists in the ports tree
:debug:main sqlite3 3.7.12_0 is the latest installed
:debug:main sqlite3 3.7.12_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port sqlite3.
:debug:main Requested variant +quartz is not provided by port sqlite3.
:debug:main No need to upgrade! sqlite3 3.7.12_0 >= sqlite3 3.7.12_0
:debug:main epoch: in tree: 20090923 installed: 20090923
:debug:main libedit 20110802-3.0_0 exists in the ports tree
:debug:main libedit 20110802-3.0_0 is the latest installed
:debug:main libedit 20110802-3.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port libedit.
:debug:main Requested variant +quartz is not provided by port libedit.
:debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit
20110802-3.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.5_0 exists in the ports tree
:debug:main tiff 3.9.5_0 is the latest installed
:debug:main tiff 3.9.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port tiff.
:debug:main Requested variant +quartz is not provided by port tiff.
:debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8d_0 exists in the ports tree
:debug:main jpeg 8d_0 is the latest installed
:debug:main jpeg 8d_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port jpeg.
:debug:main Requested variant +quartz is not provided by port jpeg.
:debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.4.11_0 exists in the ports tree
:debug:main libpng 1.4.11_0 is the latest installed
:debug:main libpng 1.4.11_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libpng.
:debug:main Requested variant +quartz is not provided by port libpng.
:debug:main No need to upgrade! libpng 1.4.11_0 >= libpng 1.4.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libmng 1.0.10_2 exists in the ports tree
:debug:main libmng 1.0.10_2 is the latest installed
:debug:main libmng 1.0.10_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libmng
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libmng.
:debug:main Requested variant +quartz is not provided by port libmng.
:debug:main No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main lcms 1.19_2 exists in the ports tree
:debug:main lcms 1.19_2 is the latest installed
:debug:main lcms 1.19_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port lcms.
:debug:main Requested variant +quartz is not provided by port lcms.
:debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main phonon 4.4.2_3 exists in the ports tree
:debug:main phonon 4.4.2_3 is the latest installed
:debug:main phonon 4.4.2_3 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/phonon
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port phonon.
:debug:main Requested variant +quartz is not provided by port phonon.
:debug:main No need to upgrade! phonon 4.4.2_3 >= phonon 4.4.2_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main kdelibs4 4.8.3_0 exists in the ports tree
:debug:main kdelibs4 4.8.3_0 is the latest installed
:debug:main kdelibs4 4.8.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/kde/kdelibs4
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port kdelibs4.
:debug:main Requested variant +quartz is not provided by port kdelibs4.
:debug:main No need to upgrade! kdelibs4 4.8.3_0 >= kdelibs4 4.8.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0 is the latest installed
:debug:main bzip2 1.0.6_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port bzip2.
:debug:main Requested variant +quartz is not provided by port bzip2.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main soprano 2.7.4_0 exists in the ports tree
:debug:main soprano 2.7.4_0 is the latest installed
:debug:main soprano 2.7.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/soprano
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port soprano.
:debug:main Requested variant +quartz is not provided by port soprano.
:debug:main No need to upgrade! soprano 2.7.4_0 >= soprano 2.7.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main clucene 0.9.21b_0 exists in the ports tree
:debug:main clucene 0.9.21b_0 is the latest installed
:debug:main clucene 0.9.21b_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/clucene
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port clucene.
:debug:main Requested variant +quartz is not provided by port clucene.
:debug:main No need to upgrade! clucene 0.9.21b_0 >= clucene 0.9.21b_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main strigi 0.7.5_1 exists in the ports tree
:debug:main strigi 0.7.5_1 is the latest installed
:debug:main strigi 0.7.5_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/strigi
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port strigi.
:debug:main Requested variant +quartz is not provided by port strigi.
:debug:main No need to upgrade! strigi 0.7.5_1 >= strigi 0.7.5_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.8_0 exists in the ports tree
:debug:main libxml2 2.7.8_0 is the latest installed
:debug:main libxml2 2.7.8_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libxml2.
:debug:main Requested variant +quartz is not provided by port libxml2.
:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main ffmpeg 0.7.11_1 exists in the ports tree
:debug:main ffmpeg 0.7.11_1 +mmx is the latest installed
:debug:main ffmpeg 0.7.11_1 +mmx is active
:debug:main Merging existing variants '+mmx' into variants
:debug:main new fully merged portvariants: no_x11 + mmx + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/ffmpeg
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port ffmpeg.
:debug:main Requested variant +quartz is not provided by port ffmpeg.
:debug:main Executing variant mmx provides mmx
:debug:main No need to upgrade! ffmpeg 0.7.11_1 >= ffmpeg 0.7.11_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main lame 3.99_1 exists in the ports tree
:debug:main lame 3.99_1 is the latest installed
:debug:main lame 3.99_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/lame
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port lame.
:debug:main Requested variant +quartz is not provided by port lame.
:debug:main No need to upgrade! lame 3.99_1 >= lame 3.99_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libvorbis 1.3.2_1 exists in the ports tree
:debug:main libvorbis 1.3.2_1 is the latest installed
:debug:main libvorbis 1.3.2_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/libvorbis
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libvorbis.
:debug:main Requested variant +quartz is not provided by port libvorbis.
:debug:main No need to upgrade! libvorbis 1.3.2_1 >= libvorbis 1.3.2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libogg 1.3.0_1 exists in the ports tree
:debug:main libogg 1.3.0_1 is the latest installed
:debug:main libogg 1.3.0_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libogg
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libogg.
:debug:main Requested variant +quartz is not provided by port libogg.
:debug:main No need to upgrade! libogg 1.3.0_1 >= libogg 1.3.0_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main libtheora 1.1.1_1 exists in the ports tree
:debug:main libtheora 1.1.1_1 is the latest installed
:debug:main libtheora 1.1.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libtheora
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libtheora.
:debug:main Requested variant +quartz is not provided by port libtheora.
:debug:main No need to upgrade! libtheora 1.1.1_1 >= libtheora 1.1.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main dirac 1.0.2_1 exists in the ports tree
:debug:main dirac 1.0.2_1 is the latest installed
:debug:main dirac 1.0.2_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/dirac
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port dirac.
:debug:main Requested variant +quartz is not provided by port dirac.
:debug:main No need to upgrade! dirac 1.0.2_1 >= dirac 1.0.2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main cppunit 1.12.1_0 exists in the ports tree
:debug:main cppunit 1.12.1_0 is the latest installed
:debug:main cppunit 1.12.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cppunit
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port cppunit.
:debug:main Requested variant +quartz is not provided by port cppunit.
:debug:main No need to upgrade! cppunit 1.12.1_0 >= cppunit 1.12.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main schroedinger 1.0.11_0 exists in the ports tree
:debug:main schroedinger 1.0.11_0 is the latest installed
:debug:main schroedinger 1.0.11_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/schroedinger
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port
schroedinger.
:debug:main Requested variant +quartz is not provided by port
schroedinger.
:debug:main No need to upgrade! schroedinger 1.0.11_0 >= schroedinger
1.0.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main orc 0.4.16_0 exists in the ports tree
:debug:main orc 0.4.16_0 is the latest installed
:debug:main orc 0.4.16_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orc
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port orc.
:debug:main Requested variant +quartz is not provided by port orc.
:debug:main No need to upgrade! orc 0.4.16_0 >= orc 0.4.16_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main openjpeg 1.5.0_1 exists in the ports tree
:debug:main openjpeg 1.5.0_1 is the latest installed
:debug:main openjpeg 1.5.0_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/openjpeg
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port openjpeg.
:debug:main Requested variant +quartz is not provided by port openjpeg.
:debug:main No need to upgrade! openjpeg 1.5.0_1 >= openjpeg 1.5.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main lcms2 2.3_0 exists in the ports tree
:debug:main lcms2 2.3_0 is the latest installed
:debug:main lcms2 2.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port lcms2.
:debug:main Requested variant +quartz is not provided by port lcms2.
:debug:main No need to upgrade! lcms2 2.3_0 >= lcms2 2.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jbigkit 2.0_2 exists in the ports tree
:debug:main jbigkit 2.0_2 is the latest installed
:debug:main jbigkit 2.0_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jbigkit
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port jbigkit.
:debug:main Requested variant +quartz is not provided by port jbigkit.
:debug:main No need to upgrade! jbigkit 2.0_2 >= jbigkit 2.0_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main speex 1.2rc1_0 exists in the ports tree
:debug:main speex 1.2rc1_0 is the latest installed
:debug:main speex 1.2rc1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/speex
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port speex.
:debug:main Requested variant +quartz is not provided by port speex.
:debug:main No need to upgrade! speex 1.2rc1_0 >= speex 1.2rc1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main XviD 1.3.2_2 exists in the ports tree
:debug:main XviD 1.3.2_2 is the latest installed
:debug:main XviD 1.3.2_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/XviD
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port XviD.
:debug:main Requested variant +quartz is not provided by port XviD.
:debug:main No need to upgrade! XviD 1.3.2_2 >= XviD 1.3.2_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main x264 20111210_0 exists in the ports tree
:debug:main x264 20111210_0 is the latest installed
:debug:main x264 20111210_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/x264
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port x264.
:debug:main Requested variant +quartz is not provided by port x264.
:debug:main No need to upgrade! x264 20111210_0 >= x264 20111210_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libvpx 1.0.0_0 exists in the ports tree
:debug:main libvpx 1.0.0_0 is the latest installed
:debug:main libvpx 1.0.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libvpx
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port libvpx.
:debug:main Requested variant +quartz is not provided by port libvpx.
:debug:main No need to upgrade! libvpx 1.0.0_0 >= libvpx 1.0.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libsdl 1.2.15_0 exists in the ports tree
:debug:main libsdl 1.2.15_0 +no_x11 is the latest installed
:debug:main libsdl 1.2.15_0 +no_x11 is active
:debug:main Merging existing variants '+no_x11-x11' into variants
:debug:main new fully merged portvariants: x11 - no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libsdl
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Requested variant +quartz is not provided by port libsdl.
:debug:main Executing variant no_x11 provides no_x11
:debug:main No need to upgrade! libsdl 1.2.15_0 >= libsdl 1.2.15_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main raptor2 2.0.7_0 exists in the ports tree
:debug:main raptor2 2.0.7_0 is the latest installed
:debug:main raptor2 2.0.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/www/raptor2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port raptor2.
:debug:main Requested variant +quartz is not provided by port raptor2.
:debug:main No need to upgrade! raptor2 2.0.7_0 >= raptor2 2.0.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main curl 7.25.0_1 exists in the ports tree
:debug:main curl 7.25.0_1 +ssl is the latest installed
:debug:main curl 7.25.0_1 +ssl is active
:debug:main Merging existing variants '+ssl' into variants
:debug:main new fully merged portvariants: no_x11 + ssl + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/curl
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port curl.
:debug:main Requested variant +quartz is not provided by port curl.
:debug:main Executing variant ssl provides ssl
:debug:main No need to upgrade! curl 7.25.0_1 >= curl 7.25.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main curl-ca-bundle 7.25.0_0 exists in the ports tree
:debug:main curl-ca-bundle 7.25.0_0 is the latest installed
:debug:main curl-ca-bundle 7.25.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net
/curl-ca-bundle
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port curl-ca-
bundle.
:debug:main Requested variant +quartz is not provided by port curl-ca-
bundle.
:debug:main No need to upgrade! curl-ca-bundle 7.25.0_0 >= curl-ca-bundle
7.25.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxslt 1.1.26_0 exists in the ports tree
:debug:main libxslt 1.1.26_0 +doc is the latest installed
:debug:main libxslt 1.1.26_0 +doc is active
:debug:main Merging existing variants '+doc' into variants
:debug:main new fully merged portvariants: no_x11 + doc + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxslt
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libxslt.
:debug:main Requested variant +quartz is not provided by port libxslt.
:debug:main Executing variant doc provides doc
:debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main redland 1.0.15_0 exists in the ports tree
:debug:main redland 1.0.15_0 +db46 is the latest installed
:debug:main redland 1.0.15_0 +db46 is active
:debug:main Merging existing variants '+db46' into variants
:debug:main new fully merged portvariants: db46 + no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/www/redland
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Requested variant +no_x11 is not provided by port redland.
:debug:main Requested variant +quartz is not provided by port redland.
:debug:main Executing variant db46 provides db46
:debug:main No need to upgrade! redland 1.0.15_0 >= redland 1.0.15_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libtool 2.4.2_0 exists in the ports tree
:debug:main libtool 2.4.2_0 is the latest installed
:debug:main libtool 2.4.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libtool.
:debug:main Requested variant +quartz is not provided by port libtool.
:debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main rasqal 0.9.28_0 exists in the ports tree
:debug:main rasqal 0.9.28_0 is the latest installed
:debug:main rasqal 0.9.28_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/www/rasqal
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port rasqal.
:debug:main Requested variant +quartz is not provided by port rasqal.
:debug:main No need to upgrade! rasqal 0.9.28_0 >= rasqal 0.9.28_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main mhash 0.9.9.9_0 exists in the ports tree
:debug:main mhash 0.9.9.9_0 is the latest installed
:debug:main mhash 0.9.9.9_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/mhash
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port mhash.
:debug:main Requested variant +quartz is not provided by port mhash.
:debug:main No need to upgrade! mhash 0.9.9.9_0 >= mhash 0.9.9.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main mpfr 3.1.0-p3_1 exists in the ports tree
:debug:main mpfr 3.1.0-p3_1 is the latest installed
:debug:main mpfr 3.1.0-p3_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/mpfr
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port mpfr.
:debug:main Requested variant +quartz is not provided by port mpfr.
:debug:main No need to upgrade! mpfr 3.1.0-p3_1 >= mpfr 3.1.0-p3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gmp 5.0.4_0 exists in the ports tree
:debug:main gmp 5.0.4_0 is the latest installed
:debug:main gmp 5.0.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmp
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port gmp.
:debug:main Requested variant +quartz is not provided by port gmp.
:debug:main No need to upgrade! gmp 5.0.4_0 >= gmp 5.0.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6 +java is the latest installed
:debug:main db46 4.6.21_6 +java is active
:debug:main Merging existing variants '+java' into variants
:debug:main new fully merged portvariants: no_x11 + java + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port db46.
:debug:main Requested variant +quartz is not provided by port db46.
:debug:main Executing variant java provides java
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiodbc 3.52.8_0 exists in the ports tree
:debug:main libiodbc 3.52.8_0 is the latest installed
:debug:main libiodbc 3.52.8_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libiodbc
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/github-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libiodbc.
:debug:main Requested variant +quartz is not provided by port libiodbc.
:debug:main No need to upgrade! libiodbc 3.52.8_0 >= libiodbc 3.52.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main virtuoso 6.1.5_0 exists in the ports tree
:debug:main virtuoso 6.1.5_0 is the latest installed
:debug:main virtuoso 6.1.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/virtuoso
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port virtuoso.
:debug:main Requested variant +quartz is not provided by port virtuoso.
:debug:main No need to upgrade! virtuoso 6.1.5_0 >= virtuoso 6.1.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main cyrus-sasl2 2.1.23_3 exists in the ports tree
:debug:main cyrus-sasl2 2.1.23_3 +kerberos is the latest installed
:debug:main cyrus-sasl2 2.1.23_3 +kerberos is active
:debug:main Merging existing variants '+kerberos' into variants
:debug:main new fully merged portvariants: kerberos + no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security
/cyrus-sasl2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port cyrus-sasl2.
:debug:main Requested variant +quartz is not provided by port cyrus-sasl2.
:debug:main Executing variant kerberos provides kerberos
:debug:main No need to upgrade! cyrus-sasl2 2.1.23_3 >= cyrus-sasl2
2.1.23_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main pcre 8.30_0 exists in the ports tree
:debug:main pcre 8.30_0 is the latest installed
:debug:main pcre 8.30_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pcre
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port pcre.
:debug:main Requested variant +quartz is not provided by port pcre.
:debug:main No need to upgrade! pcre 8.30_0 >= pcre 8.30_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main shared-mime-info 1.0_0 exists in the ports tree
:debug:main shared-mime-info 1.0_0 is the latest installed
:debug:main shared-mime-info 1.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
/shared-mime-info
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port shared-mime-
info.
:debug:main Requested variant +quartz is not provided by port shared-mime-
info.
:debug:main No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-info
1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main giflib 4.2.0_1 exists in the ports tree
:debug:main giflib 4.2.0_1 +no_x11 is the latest installed
:debug:main giflib 4.2.0_1 +no_x11 is active
:debug:main Merging existing variants '+no_x11-x11' into variants
:debug:main new fully merged portvariants: x11 - no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/giflib
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Requested variant +quartz is not provided by port giflib.
:debug:main Executing variant no_x11 provides no_x11
:debug:main No need to upgrade! giflib 4.2.0_1 >= giflib 4.2.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main jasper 1.900.1_9 exists in the ports tree
:debug:main jasper 1.900.1_9 is the latest installed
:debug:main jasper 1.900.1_9 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port jasper.
:debug:main Requested variant +quartz is not provided by port jasper.
:debug:main No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
:debug:main epoch: in tree: 0 installed: 0
:debug:main openexr 1.7.0_0 exists in the ports tree
:debug:main openexr 1.7.0_0 is the latest installed
:debug:main openexr 1.7.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/openexr
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port openexr.
:debug:main Requested variant +quartz is not provided by port openexr.
:debug:main No need to upgrade! openexr 1.7.0_0 >= openexr 1.7.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ilmbase 1.0.2_0 exists in the ports tree
:debug:main ilmbase 1.0.2_0 is the latest installed
:debug:main ilmbase 1.0.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/ilmbase
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port ilmbase.
:debug:main Requested variant +quartz is not provided by port ilmbase.
:debug:main No need to upgrade! ilmbase 1.0.2_0 >= ilmbase 1.0.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libart_lgpl 2.3.21_0 exists in the ports tree
:debug:main libart_lgpl 2.3.21_0 is the latest installed
:debug:main libart_lgpl 2.3.21_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libart_lgpl
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libart_lgpl.
:debug:main Requested variant +quartz is not provided by port libart_lgpl.
:debug:main No need to upgrade! libart_lgpl 2.3.21_0 >= libart_lgpl
2.3.21_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main enchant 1.6.0_1 exists in the ports tree
:debug:main enchant 1.6.0_1 is the latest installed
:debug:main enchant 1.6.0_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/enchant
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port enchant.
:debug:main Requested variant +quartz is not provided by port enchant.
:debug:main No need to upgrade! enchant 1.6.0_1 >= enchant 1.6.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main aspell 0.60.6_4 exists in the ports tree
:debug:main aspell 0.60.6_4 +nonls is the latest installed
:debug:main aspell 0.60.6_4 +nonls is active
:debug:main Merging existing variants '+nonls' into variants
:debug:main new fully merged portvariants: no_x11 + nonls + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/aspell
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Requested variant +no_x11 is not provided by port aspell.
:debug:main Requested variant +quartz is not provided by port aspell.
:debug:main Executing variant nonls provides nonls
:debug:main No need to upgrade! aspell 0.60.6_4 >= aspell 0.60.6_4
:debug:main epoch: in tree: 0 installed: 0
:debug:main texinfo 4.13_2 exists in the ports tree
:debug:main texinfo 4.13_2 is the latest installed
:debug:main texinfo 4.13_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/texinfo
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port texinfo.
:debug:main Requested variant +quartz is not provided by port texinfo.
:debug:main No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main hunspell 1.3.2_0 exists in the ports tree
:debug:main hunspell 1.3.2_0 is the latest installed
:debug:main hunspell 1.3.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/hunspell
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port hunspell.
:debug:main Requested variant +quartz is not provided by port hunspell.
:debug:main No need to upgrade! hunspell 1.3.2_0 >= hunspell 1.3.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0 is the latest installed
:debug:main readline 6.2.000_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port readline.
:debug:main Requested variant +quartz is not provided by port readline.
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main aspell-dict-en 7.1_0 exists in the ports tree
:debug:main aspell-dict-en 7.1_0 is the latest installed
:debug:main aspell-dict-en 7.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/aspell-dict-en
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Requested variant +no_x11 is not provided by port aspell-dict-
en.
:debug:main Requested variant +quartz is not provided by port aspell-dict-
en.
:debug:main No need to upgrade! aspell-dict-en 7.1_0 >= aspell-dict-en
7.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main attica 0.3.0_0 exists in the ports tree
:debug:main attica 0.3.0_0 is the latest installed
:debug:main attica 0.3.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/kde/attica
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port attica.
:debug:main Requested variant +quartz is not provided by port attica.
:debug:main No need to upgrade! attica 0.3.0_0 >= attica 0.3.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main liblzma 5.0.3_0 exists in the ports tree
:debug:main liblzma 5.0.3_0 is the latest installed
:debug:main liblzma 5.0.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/liblzma
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port liblzma.
:debug:main Requested variant +quartz is not provided by port liblzma.
:debug:main No need to upgrade! liblzma 5.0.3_0 >= liblzma 5.0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main avahi 0.6.31_1 exists in the ports tree
:debug:main avahi 0.6.31_1 +gtk+python27 is the latest installed
:debug:main avahi 0.6.31_1 +gtk+python27 is active
:debug:main Merging existing variants '+gtk+python27' into variants
:debug:main new fully merged portvariants: no_x11 + gtk + quartz +
python27 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/avahi
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port avahi.
:debug:main Requested variant +quartz is not provided by port avahi.
:debug:main Executing variant gtk provides gtk
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! avahi 0.6.31_1 >= avahi 0.6.31_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libdaemon 0.14_0 exists in the ports tree
:debug:main libdaemon 0.14_0 is the latest installed
:debug:main libdaemon 0.14_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libdaemon
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port libdaemon.
:debug:main Requested variant +quartz is not provided by port libdaemon.
:debug:main No need to upgrade! libdaemon 0.14_0 >= libdaemon 0.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libglade2 2.6.4_4 exists in the ports tree
:debug:main libglade2 2.6.4_4 +quartz is the latest installed
:debug:main libglade2 2.6.4_4 +quartz is active
:debug:main Merging existing variants '+quartz' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/libglade2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Requested variant +no_x11 is not provided by port libglade2.
:debug:main Executing variant quartz provides quartz
:debug:main No need to upgrade! libglade2 2.6.4_4 >= libglade2 2.6.4_4
:debug:main epoch: in tree: 0 installed: 0
:debug:main fontconfig 2.9.0_1 exists in the ports tree
:debug:main fontconfig 2.9.0_1 is the latest installed
:debug:main fontconfig 2.9.0_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port fontconfig.
:debug:main Requested variant +quartz is not provided by port fontconfig.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main freetype 2.4.9_1 exists in the ports tree
:debug:main freetype 2.4.9_1 is the latest installed
:debug:main freetype 2.4.9_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port freetype.
:debug:main Requested variant +quartz is not provided by port freetype.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! freetype 2.4.9_1 >= freetype 2.4.9_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gtk2 2.24.10_0 exists in the ports tree
:debug:main gtk2 2.24.10_0 +no_x11+quartz is the latest installed
:debug:main gtk2 2.24.10_0 +no_x11+quartz is active
:debug:main Merging existing variants '+no_x11+quartz' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant no_x11 provides no_x11
:debug:main Executing variant quartz provides quartz
:debug:main No need to upgrade! gtk2 2.24.10_0 >= gtk2 2.24.10_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main atk 2.2.0_0 exists in the ports tree
:debug:main atk 2.2.0_0 is the latest installed
:debug:main atk 2.2.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port atk.
:debug:main Requested variant +quartz is not provided by port atk.
:debug:main No need to upgrade! atk 2.2.0_0 >= atk 2.2.0_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main pango 1.30.0_0 exists in the ports tree
:debug:main pango 1.30.0_0 +no_x11+quartz is the latest installed
:debug:main pango 1.30.0_0 +no_x11+quartz is active
:debug:main Merging existing variants '+no_x11+quartz-x11' into variants
:debug:main new fully merged portvariants: x11 - no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Executing variant quartz provides quartz
:debug:main Executing variant no_x11 provides no_x11
:debug:main No need to upgrade! pango 1.30.0_0 >= pango 1.30.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main cairo 1.12.2_0 exists in the ports tree
:debug:main cairo 1.12.2_0 +no_x11+quartz is the latest installed
:debug:main cairo 1.12.2_0 +no_x11+quartz is active
:debug:main Merging existing variants '+no_x11+quartz-x11' into variants
:debug:main new fully merged portvariants: x11 - no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main Executing variant quartz provides quartz
:debug:main Executing variant no_x11 provides no_x11
:debug:main No need to upgrade! cairo 1.12.2_0 >= cairo 1.12.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpixman 0.24.4_0 exists in the ports tree
:debug:main libpixman 0.24.4_0 is the latest installed
:debug:main libpixman 0.24.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port libpixman.
:debug:main Requested variant +quartz is not provided by port libpixman.
:debug:main No need to upgrade! libpixman 0.24.4_0 >= libpixman 0.24.4_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main gdk-pixbuf2 2.26.1_0 exists in the ports tree
:debug:main gdk-pixbuf2 2.26.1_0 is the latest installed
:debug:main gdk-pixbuf2 2.26.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics
/gdk-pixbuf2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port gdk-pixbuf2.
:debug:main Requested variant +quartz is not provided by port gdk-pixbuf2.
:debug:main No need to upgrade! gdk-pixbuf2 2.26.1_0 >= gdk-pixbuf2
2.26.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
:debug:main hicolor-icon-theme 0.12_0 is the latest installed
:debug:main hicolor-icon-theme 0.12_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
/hicolor-icon-theme
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Requested variant +no_x11 is not provided by port hicolor-
icon-theme.
:debug:main Requested variant +quartz is not provided by port hicolor-
icon-theme.
:debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-
theme 0.12_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbus-python27 0.84.0_0 exists in the ports tree
:debug:main dbus-python27 0.84.0_0 is the latest installed
:debug:main dbus-python27 0.84.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
/dbus-python27
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port dbus-
python27.
:debug:main Requested variant +quartz is not provided by port dbus-
python27.
:debug:main No need to upgrade! dbus-python27 0.84.0_0 >= dbus-python27
0.84.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbus-glib 0.98_0 exists in the ports tree
:debug:main dbus-glib 0.98_0 is the latest installed
:debug:main dbus-glib 0.98_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
/dbus-glib
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port dbus-glib.
:debug:main Requested variant +quartz is not provided by port dbus-glib.
:debug:main No need to upgrade! dbus-glib 0.98_0 >= dbus-glib 0.98_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main py27-gobject 2.26.0_2 exists in the ports tree
:debug:main py27-gobject 2.26.0_2 is the latest installed
:debug:main py27-gobject 2.26.0_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py27-gobject
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port
py27-gobject.
:debug:main Requested variant +quartz is not provided by port
py27-gobject.
:debug:main No need to upgrade! py27-gobject 2.26.0_2 >= py27-gobject
2.26.0_2
:debug:main epoch: in tree: 2 installed: 2
:debug:main python27 2.7.3_0 exists in the ports tree
:debug:main python27 2.7.3_0 is the latest installed
:debug:main python27 2.7.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port python27.
:debug:main Requested variant +quartz is not provided by port python27.
:debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python_select 0.3_1 exists in the ports tree
:debug:main python_select 0.3_1 is the latest installed
:debug:main python_select 0.3_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port
python_select.
:debug:main Requested variant +quartz is not provided by port
python_select.
:debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main py27-gdbm 2.7.3_0 exists in the ports tree
:debug:main py27-gdbm 2.7.3_0 is the latest installed
:debug:main py27-gdbm 2.7.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python
/py-gdbm
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl
:debug:main Re-registering default for build.cmd
:debug:main Re-registering default for destroot.cmd
:debug:main Re-registering default for destroot.destdir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port py27-gdbm.
:debug:main Requested variant +quartz is not provided by port py27-gdbm.
:debug:main No need to upgrade! py27-gdbm 2.7.3_0 >= py27-gdbm 2.7.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main py27-gtk 2.22.0_1 exists in the ports tree
:debug:main py27-gtk 2.22.0_1 is the latest installed
:debug:main py27-gtk 2.22.0_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py27-gtk
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Requested variant +no_x11 is not provided by port py27-gtk.
:debug:main Executing variant quartz provides quartz
:debug:main Skipping upgrade since py27-gtk 2.22.0_1 >= py27-gtk 2.22.0_1,
even though installed variants "" do not match "+quartz".
:debug:main epoch: in tree: 0 installed: 0
:debug:main py27-cairo 1.8.10_1 exists in the ports tree
:debug:main py27-cairo 1.8.10_1 is the latest installed
:debug:main py27-cairo 1.8.10_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py27-cairo
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port py27-cairo.
:debug:main Requested variant +quartz is not provided by port py27-cairo.
:debug:main No need to upgrade! py27-cairo 1.8.10_1 >= py27-cairo 1.8.10_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main intltool 0.50.2_0 exists in the ports tree
:debug:main intltool 0.50.2_0 is the latest installed
:debug:main intltool 0.50.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/intltool
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Requested variant +no_x11 is not provided by port intltool.
:debug:main Requested variant +quartz is not provided by port intltool.
:debug:main No need to upgrade! intltool 0.50.2_0 >= intltool 0.50.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5.12-xml-parser 2.400.0_3 exists in the ports tree
:debug:main p5.12-xml-parser 2.400.0_3 is the latest installed
:debug:main p5.12-xml-parser 2.400.0_3 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
-xml-parser
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for livecheck.version
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port p5.12-xml-
parser.
:debug:main Requested variant +quartz is not provided by port p5.12-xml-
parser.
:debug:main No need to upgrade! p5.12-xml-parser 2.400.0_3 >= p5.12-xml-
parser 2.400.0_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5.12-getopt-long 2.380.0_2 exists in the ports tree
:debug:main p5.12-getopt-long 2.380.0_2 is the latest installed
:debug:main p5.12-getopt-long 2.380.0_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
-getopt-long
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for livecheck.version
:debug:main Re-registering default for configure.universal_args
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Requested variant +no_x11 is not provided by port p5.12
-getopt-long.
:debug:main Requested variant +quartz is not provided by port p5.12
-getopt-long.
:debug:main No need to upgrade! p5.12-getopt-long 2.380.0_2 >= p5.12
-getopt-long 2.380.0_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5.12-pathtools 3.330.0_2 exists in the ports tree
:debug:main p5.12-pathtools 3.330.0_2 is the latest installed
:debug:main p5.12-pathtools 3.330.0_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-pathtools
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for livecheck.version
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port
p5.12-pathtools.
:debug:main Requested variant +quartz is not provided by port
p5.12-pathtools.
:debug:main No need to upgrade! p5.12-pathtools 3.330.0_2 >=
p5.12-pathtools 3.330.0_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5.12-scalar-list-utils 1.230.0_2 exists in the ports tree
:debug:main p5.12-scalar-list-utils 1.230.0_2 is the latest installed
:debug:main p5.12-scalar-list-utils 1.230.0_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
-scalar-list-utils
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for livecheck.version
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port p5.12
-scalar-list-utils.
:debug:main Requested variant +quartz is not provided by port p5.12
-scalar-list-utils.
:debug:main No need to upgrade! p5.12-scalar-list-utils 1.230.0_2 >= p5.12
-scalar-list-utils 1.230.0_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main qca 2.0.3_0 exists in the ports tree
:debug:main qca 2.0.3_0 is the latest installed
:debug:main qca 2.0.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/qca
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port qca.
:debug:main Requested variant +quartz is not provided by port qca.
:debug:main No need to upgrade! qca 2.0.3_0 >= qca 2.0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbusmenu-qt 0.9.0_0 exists in the ports tree
:debug:main dbusmenu-qt 0.9.0_0 is the latest installed
:debug:main dbusmenu-qt 0.9.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
/dbusmenu-qt
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port dbusmenu-qt.
:debug:main Requested variant +quartz is not provided by port dbusmenu-qt.
:debug:main No need to upgrade! dbusmenu-qt 0.9.0_0 >= dbusmenu-qt 0.9.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main qjson 0.7.1_1 exists in the ports tree
:debug:main qjson 0.7.1_1 is the latest installed
:debug:main qjson 0.7.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/qjson
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port qjson.
:debug:main Requested variant +quartz is not provided by port qjson.
:debug:main No need to upgrade! qjson 0.7.1_1 >= qjson 0.7.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml 5.0_0 exists in the ports tree
:debug:main docbook-xml 5.0_0 is the latest installed
:debug:main docbook-xml 5.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/docbook-xml
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port docbook-xml.
:debug:main Requested variant +quartz is not provided by port docbook-xml.
:debug:main No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
:debug:main docbook-xml-4.1.2 4.1.2_1 is the latest installed
:debug:main docbook-xml-4.1.2 4.1.2_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/docbook-xml-4.1.2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port docbook-
xml-4.1.2.
:debug:main Requested variant +quartz is not provided by port docbook-
xml-4.1.2.
:debug:main No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-
xml-4.1.2 4.1.2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main xmlcatmgr 2.2_1 exists in the ports tree
:debug:main xmlcatmgr 2.2_1 is the latest installed
:debug:main xmlcatmgr 2.2_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/xmlcatmgr
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port xmlcatmgr.
:debug:main Requested variant +quartz is not provided by port xmlcatmgr.
:debug:main No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.2 4.2_0 exists in the ports tree
:debug:main docbook-xml-4.2 4.2_0 is the latest installed
:debug:main docbook-xml-4.2 4.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/docbook-xml-4.2
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port docbook-
xml-4.2.
:debug:main Requested variant +quartz is not provided by port docbook-
xml-4.2.
:debug:main No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2
4.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.3 4.3_0 exists in the ports tree
:debug:main docbook-xml-4.3 4.3_0 is the latest installed
:debug:main docbook-xml-4.3 4.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/docbook-xml-4.3
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port docbook-
xml-4.3.
:debug:main Requested variant +quartz is not provided by port docbook-
xml-4.3.
:debug:main No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3
4.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.4 4.4_0 exists in the ports tree
:debug:main docbook-xml-4.4 4.4_0 is the latest installed
:debug:main docbook-xml-4.4 4.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/docbook-xml-4.4
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port docbook-
xml-4.4.
:debug:main Requested variant +quartz is not provided by port docbook-
xml-4.4.
:debug:main No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4
4.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.5 4.5_0 exists in the ports tree
:debug:main docbook-xml-4.5 4.5_0 is the latest installed
:debug:main docbook-xml-4.5 4.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/docbook-xml-4.5
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port docbook-
xml-4.5.
:debug:main Requested variant +quartz is not provided by port docbook-
xml-4.5.
:debug:main No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5
4.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-5.0 5.0_0 exists in the ports tree
:debug:main docbook-xml-5.0 5.0_0 is the latest installed
:debug:main docbook-xml-5.0 5.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/docbook-xml-5.0
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port docbook-
xml-5.0.
:debug:main Requested variant +quartz is not provided by port docbook-
xml-5.0.
:debug:main No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0
5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xsl 1.76.1_1 exists in the ports tree
:debug:main docbook-xsl 1.76.1_1 is the latest installed
:debug:main docbook-xsl 1.76.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/docbook-xsl
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port docbook-xsl.
:debug:main Requested variant +quartz is not provided by port docbook-xsl.
:debug:main No need to upgrade! docbook-xsl 1.76.1_1 >= docbook-xsl
1.76.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main grantlee 0.2.0_0 exists in the ports tree
:debug:main grantlee 0.2.0_0 is the latest installed
:debug:main grantlee 0.2.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/grantlee
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port grantlee.
:debug:main Requested variant +quartz is not provided by port grantlee.
:debug:main No need to upgrade! grantlee 0.2.0_0 >= grantlee 0.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main kerberos5 1.7.2_0 exists in the ports tree
:debug:main kerberos5 1.7.2_0 is the latest installed
:debug:main kerberos5 1.7.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/kerberos5
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +no_x11 is not provided by port kerberos5.
:debug:main Requested variant +quartz is not provided by port kerberos5.
:debug:main No need to upgrade! kerberos5 1.7.2_0 >= kerberos5 1.7.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main shared-desktop-ontologies 0.9.0_0 exists in the ports tree
:debug:main shared-desktop-ontologies 0.9.0_0 is the latest installed
:debug:main shared-desktop-ontologies 0.9.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/kde
/shared-desktop-ontologies
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Requested variant +no_x11 is not provided by port shared-
desktop-ontologies.
:debug:main Requested variant +quartz is not provided by port shared-
desktop-ontologies.
:debug:main No need to upgrade! shared-desktop-ontologies 0.9.0_0 >=
shared-desktop-ontologies 0.9.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xsl-ns 1.76.1_0 exists in the ports tree
:debug:main docbook-xsl-ns 1.76.1_0 is the latest installed
:debug:main docbook-xsl-ns 1.76.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc
/docbook-xsl-ns
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Requested variant +no_x11 is not provided by port docbook-xsl-
ns.
:debug:main Requested variant +quartz is not provided by port docbook-xsl-
ns.
:debug:main No need to upgrade! docbook-xsl-ns 1.76.1_0 >= docbook-xsl-ns
1.76.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main boost 1.49.0_0 exists in the ports tree
:debug:main boost 1.49.0_0 +python26 is the latest installed
:debug:main boost 1.49.0_0 +python26 is active
:debug:main Merging existing variants '+python26' into variants
:debug:main new fully merged portvariants: no_x11 + python26 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/boost
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port boost.
:debug:main Requested variant +quartz is not provided by port boost.
:debug:main Executing variant python26 provides python26
:debug:main No need to upgrade! boost 1.49.0_0 >= boost 1.49.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main icu 4.8.1_0 exists in the ports tree
:debug:main icu 4.8.1_0 is the latest installed
:debug:main icu 4.8.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port icu.
:debug:main Requested variant +quartz is not provided by port icu.
:debug:main No need to upgrade! icu 4.8.1_0 >= icu 4.8.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python26 2.6.8_0 exists in the ports tree
:debug:main python26 2.6.8_0 is the latest installed
:debug:main python26 2.6.8_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_x11 + quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python26
:debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main Requested variant +no_x11 is not provided by port python26.
:debug:main Requested variant +quartz is not provided by port python26.
:debug:main No need to upgrade! python26 2.6.8_0 >= python26 2.6.8_0
:msg:main ---> Computing dependencies for kdevplatform:info:main
.:debug:main kdevplatform has no conflicts
:debug:main Searching for dependency: cmake
:debug:main Found Dependency: receipt exists for cmake
:debug:main Searching for dependency: pkgconfig
:debug:main Found Dependency: receipt exists for pkgconfig
:debug:main Searching for dependency: automoc
:debug:main Found Dependency: receipt exists for automoc
:debug:main Searching for dependency: qt4-mac
:debug:main Found Dependency: receipt exists for qt4-mac
:debug:main Searching for dependency: phonon
:debug:main Found Dependency: receipt exists for phonon
:debug:main Searching for dependency: kdelibs4
:debug:main Found Dependency: receipt exists for kdelibs4
:debug:main Searching for dependency: boost
:debug:main Found Dependency: receipt exists for boost
:msg:main
:debug:main Executing org.macports.main (kdevplatform)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 502
:debug:main Skipping completed org.macports.archivefetch (kdevplatform)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.fetch (kdevplatform)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.checksum (kdevplatform)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.extract (kdevplatform)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.patch (kdevplatform)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.configure (kdevplatform)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:build build phase started at Sun May 20 21:15:02 EDT 2012
:notice:build ---> Building kdevplatform
:debug:build Executing org.macports.build (kdevplatform)
:debug:build Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/.CC_PRINT_OPTIONS'
QTDIR='/opt/local' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.7' QMAKESPEC='macx-g++'
MOC='/opt/local/bin/moc' QMAKE='/opt/local/bin/qmake'
:debug:build Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build"
&& /usr/bin/make -w all'
:debug:build Executing command line: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build"
&& /usr/bin/make -w all
:info:build make: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build /opt/local/bin/cmake
-H/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
-B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
--check-build-system CMakeFiles/Makefile.cmake 0
:info:build /opt/local/bin/cmake -E cmake_progress_start
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles/progress.marks
:info:build /usr/bin/make -f CMakeFiles/Makefile2 all
:info:build make[1]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build /usr/bin/make -f
sublime/CMakeFiles/sublime_automoc.dir/build.make
sublime/CMakeFiles/sublime_automoc.dir/depend
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build cd
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
&& /opt/local/bin/cmake -E cmake_depends "Unix Makefiles"
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/CMakeFiles/sublime_automoc.dir/DependInfo.cmake
--color=
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build /usr/bin/make -f
sublime/CMakeFiles/sublime_automoc.dir/build.make
sublime/CMakeFiles/sublime_automoc.dir/build
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build cd
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime
&& /opt/local/bin/automoc4
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/sublime_automoc.cpp
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime
/opt/local/bin/moc /opt/local/bin/cmake
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build /opt/local/bin/cmake -E cmake_progress_report
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles
:info:build [ 0%] Built target sublime_automoc
:info:build /usr/bin/make -f sublime/CMakeFiles/sublime.dir/build.make
sublime/CMakeFiles/sublime.dir/depend
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build cd
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
&& /opt/local/bin/cmake -E cmake_depends "Unix Makefiles"
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/CMakeFiles/sublime.dir/DependInfo.cmake
--color=
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build /usr/bin/make -f sublime/CMakeFiles/sublime.dir/build.make
sublime/CMakeFiles/sublime.dir/build
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build make[2]: Nothing to be done for
`sublime/CMakeFiles/sublime.dir/build'.
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build /opt/local/bin/cmake -E cmake_progress_report
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles
98
:info:build [ 1%] Built target sublime
:info:build /usr/bin/make -f
sublime/examples/CMakeFiles/example1_automoc.dir/build.make
sublime/examples/CMakeFiles/example1_automoc.dir/depend
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build cd
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
&& /opt/local/bin/cmake -E cmake_depends "Unix Makefiles"
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime/examples
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples/CMakeFiles/example1_automoc.dir/DependInfo.cmake
--color=
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build /usr/bin/make -f
sublime/examples/CMakeFiles/example1_automoc.dir/build.make
sublime/examples/CMakeFiles/example1_automoc.dir/build
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build cd
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
&& /opt/local/bin/automoc4
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples/example1_automoc.cpp
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime/examples
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
/opt/local/bin/moc /opt/local/bin/cmake
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build /opt/local/bin/cmake -E cmake_progress_report
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/CMakeFiles
:info:build [ 1%] Built target example1_automoc
:info:build /usr/bin/make -f
sublime/examples/CMakeFiles/example1.dir/build.make
sublime/examples/CMakeFiles/example1.dir/depend
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build cd
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
&& /opt/local/bin/cmake -E cmake_depends "Unix Makefiles"
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/kdevplatform-1.3.1/sublime/examples
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples/CMakeFiles/example1.dir/DependInfo.cmake
--color=
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build /usr/bin/make -f
sublime/examples/CMakeFiles/example1.dir/build.make
sublime/examples/CMakeFiles/example1.dir/build
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build Linking CXX executable example1.app/Contents/MacOS/example1
:info:build cd
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build/sublime/examples
&& /opt/local/bin/cmake -E cmake_link_script
CMakeFiles/example1.dir/link.txt --verbose=1
:info:build /usr/bin/llvm-g++-4.2 -pipe -O2 -arch x86_64 -fno-common
-Woverloaded-virtual -fvisibility=hidden -Werror=return-type -fvisibility-
inlines-hidden -O2 -DNDEBUG -DQT_NO_DEBUG -arch x86_64 -isysroot /
-mmacosx-version-min=10.7 -Wl,-search_paths_first
-Wl,-headerpad_max_install_names -arch x86_64
CMakeFiles/example1.dir/example1_automoc.o
CMakeFiles/example1.dir/example1main.o CMakeFiles/example1.dir/example1.o
-o example1.app/Contents/MacOS/example1
/opt/local/lib/libkdeui.5.8.0.dylib /opt/local/lib/libkparts.4.8.0.dylib
../../lib/libsublime.5.0.0.dylib /opt/local/lib/libkparts.4.8.0.dylib
/opt/local/lib/libkio.5.8.0.dylib /opt/local/lib/libQtNetwork.dylib
/opt/local/lib/libQtXml.dylib /opt/local/lib/libnepomukutils.4.8.0.dylib
/opt/local/lib/libnepomuk.4.8.0.dylib /opt/local/lib/libkdeui.5.8.0.dylib
/opt/local/lib/libQtGui.dylib /opt/local/lib/libQtSvg.dylib
/opt/local/lib/libkdecore.5.8.0.dylib /opt/local/lib/libQtCore.dylib
/opt/local/lib/libQtDBus.dylib -framework Carbon
/opt/local/lib/libsoprano.dylib
:info:build Undefined symbols for architecture x86_64:
:info:build "Sublime::Controller::Controller(QObject*)", referenced
from:
:info:build Example1Main::Example1Main()in example1main.o
:info:build Example1Main::Example1Main()in example1main.o
:info:build "Sublime::UrlDocument::UrlDocument(Sublime::Controller*,
KUrl const&)", referenced from:
:info:build Example1Main::Example1Main()in example1main.o
:info:build Example1Main::Example1Main()in example1main.o
:info:build "Sublime::ToolDocument::ToolDocument(QString const&,
Sublime::Controller*, Sublime::ToolFactory*)", referenced from:
:info:build Example1Main::Example1Main()in example1main.o
:info:build Example1Main::Example1Main()in example1main.o
:info:build "Sublime::Area::Area(Sublime::Controller*, QString const&,
QString const&)", referenced from:
:info:build Example1Main::Example1Main()in example1main.o
:info:build Example1Main::Example1Main()in example1main.o
:info:build "Sublime::Controller::addDefaultArea(Sublime::Area*)",
referenced from:
:info:build Example1Main::Example1Main()in example1main.o
:info:build Example1Main::Example1Main()in example1main.o
:info:build "Sublime::Document::createView()", referenced from:
:info:build Example1Main::Example1Main()in example1main.o
:info:build Example1Main::Example1Main()in example1main.o
:info:build "Sublime::Area::addView(Sublime::View*, Sublime::View*)",
referenced from:
:info:build Example1Main::Example1Main()in example1main.o
:info:build Example1Main::Example1Main()in example1main.o
:info:build "Sublime::Area::addToolView(Sublime::View*,
Sublime::Position)", referenced from:
:info:build Example1Main::Example1Main()in example1main.o
:info:build Example1Main::Example1Main()in example1main.o
:info:build "Sublime::Area::addView(Sublime::View*, Sublime::View*,
Qt::Orientation)", referenced from:
:info:build Example1Main::Example1Main()in example1main.o
:info:build Example1Main::Example1Main()in example1main.o
:info:build "Sublime::MainWindow::staticMetaObject", referenced from:
:info:build Example1Main::updateTitle(Sublime::Area*) in
example1main.o
:info:build "Sublime::MainWindow::MainWindow(Sublime::Controller*,
QFlags<Qt::WindowType>)", referenced from:
:info:build Example1Main::selectArea2() in example1main.o
:info:build Example1Main::selectArea1() in example1main.o
:info:build "Sublime::Controller::showArea(Sublime::Area*,
Sublime::MainWindow*)", referenced from:
:info:build Example1Main::selectArea2() in example1main.o
:info:build Example1Main::selectArea1() in example1main.o
:info:build ld: symbol(s) not found for architecture x86_64
:info:build collect2: ld returned 1 exit status
:info:build make[2]: ***
[sublime/examples/example1.app/Contents/MacOS/example1] Error 1
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build make[1]: *** [sublime/examples/CMakeFiles/example1.dir/all]
Error 2
:info:build make[1]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build'
:info:build Command failed: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/work/build"
&& /usr/bin/make -w all
:info:build Exit code: 2
:error:build org.macports.build for port kdevplatform returned: command
execution failed
:debug:build Error code: CHILDSTATUS 94391 2
:debug:build Backtrace: command execution failed
while executing
"system -nice 0 $fullcmdstring"
("eval" body line 1)
invoked from within
"eval system $notty $nice \$fullcmdstring"
invoked from within
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
:info:build Warning: targets not executed for kdevplatform:
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
:notice:build Please see the log file for port kdevplatform for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdevplatform/kdevplatform/main.log
}}}
--
Ticket URL: <https://trac.macports.org/ticket/34545>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list