[MacPorts] #37017: Error: org.macports.checksum for port gnuplot returned: Unable to verify file checksums

[MacPorts]

#37017: Error: org.macports.checksum for port gnuplot returned: Unable to verify
file checksums
---------------------------+------------------------------------
  Reporter:  mjchen.sub@…  |      Owner:  mojca.miklavec.lists@…
      Type:  defect        |     Status:  new
  Priority:  Normal        |  Milestone:
 Component:  ports         |    Version:  2.1.2
Resolution:                |   Keywords:
      Port:  gnuplot       |
---------------------------+------------------------------------
Changes (by macsforever2000@…):

 * owner:  macports-tickets@… => mojca.miklavec.lists@…
 * keywords:  gnuplot =>
 * port:   => gnuplot


Old description:

> I ran the command below to install:
> sudo port install gnuplot @4.6.1
> After it failed, I ran the commands below and got the message attached
> sudo port clean gnuplot
> sudo port install gnuplot
>
> My mac is 10.6.8, snow leopard.
>
> Thanks,
>
> -Mark
>
> -----
> --->  Computing dependencies for glib2
> --->  Fetching archive for glib2
> --->  Attempting to fetch glib2-2.34.2_0.darwin_10.x86_64.tbz2 from
> http://packages.macports.org/glib2
> --->  Attempting to fetch glib2-2.34.2_0.darwin_10.x86_64.tbz2.rmd160
> from http://packages.macports.org/glib2
> --->  Installing glib2 @2.34.2_0
> --->  Cleaning glib2
> --->  Computing dependencies for glib2
> --->  Deactivating glib2 @2.34.1_0
> --->  Cleaning glib2
> --->  Activating glib2 @2.34.2_0
> --->  Cleaning glib2
> --->  Computing dependencies for gnuplot
> --->  Fetching archive for gnuplot
> --->  Attempting to fetch
> gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_10.x86_64.tbz2
> from http://packages.macports.org/gnuplot
> --->  Attempting to fetch
> gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_10.x86_64.tbz2
> from
> http://mse.uk.packages.macports.org/sites/packages.macports.org/gnuplot
> --->  Attempting to fetch
> gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_10.x86_64.tbz2
> from http://lil.fr.packages.macports.org/gnuplot
> --->  Fetching distfiles for gnuplot
> --->  Verifying checksum(s) for gnuplot
> Error: Checksum (rmd160) mismatch for gnuplot-4.6.1.tar.gz
> Error: Checksum (sha256) mismatch for gnuplot-4.6.1.tar.gz
> Error: Checksum (rmd160) mismatch for gnuplot.pdf
> Error: Checksum (sha256) mismatch for gnuplot.pdf
> ***
> The non-matching file appears to be HTML. See this page for possible
> reasons
> for the checksum mismatch:
> <https://trac.macports.org/wiki/MisbehavingServers>
> ***
> Error: org.macports.checksum for port gnuplot returned: Unable to verify
> file checksums
> To report a bug, follow the instructions in the guide:
>     http://guide.macports.org/#project.tickets
> Error: Processing of port gnuplot failed

New description:

 I ran the command below to install:
 sudo port install gnuplot @4.6.1
 After it failed, I ran the commands below and got the message attached
 sudo port clean gnuplot
 sudo port install gnuplot

 My mac is 10.6.8, snow leopard.

 Thanks,

 -Mark

 {{{
 -----
 --->  Computing dependencies for glib2
 --->  Fetching archive for glib2
 --->  Attempting to fetch glib2-2.34.2_0.darwin_10.x86_64.tbz2 from
 http://packages.macports.org/glib2
 --->  Attempting to fetch glib2-2.34.2_0.darwin_10.x86_64.tbz2.rmd160 from
 http://packages.macports.org/glib2
 --->  Installing glib2 @2.34.2_0
 --->  Cleaning glib2
 --->  Computing dependencies for glib2
 --->  Deactivating glib2 @2.34.1_0
 --->  Cleaning glib2
 --->  Activating glib2 @2.34.2_0
 --->  Cleaning glib2
 --->  Computing dependencies for gnuplot
 --->  Fetching archive for gnuplot
 --->  Attempting to fetch
 gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_10.x86_64.tbz2 from
 http://packages.macports.org/gnuplot
 --->  Attempting to fetch
 gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_10.x86_64.tbz2 from
 http://mse.uk.packages.macports.org/sites/packages.macports.org/gnuplot
 --->  Attempting to fetch
 gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_10.x86_64.tbz2 from
 http://lil.fr.packages.macports.org/gnuplot
 --->  Fetching distfiles for gnuplot
 --->  Verifying checksum(s) for gnuplot
 Error: Checksum (rmd160) mismatch for gnuplot-4.6.1.tar.gz
 Error: Checksum (sha256) mismatch for gnuplot-4.6.1.tar.gz
 Error: Checksum (rmd160) mismatch for gnuplot.pdf
 Error: Checksum (sha256) mismatch for gnuplot.pdf
 ***
 The non-matching file appears to be HTML. See this page for possible
 reasons
 for the checksum mismatch:
 <https://trac.macports.org/wiki/MisbehavingServers>
 ***
 Error: org.macports.checksum for port gnuplot returned: Unable to verify
 file checksums
 To report a bug, follow the instructions in the guide:
     http://guide.macports.org/#project.tickets
 Error: Processing of port gnuplot failed
 }}}

--

Comment:

 In the future, please use WikiFormatting, fill in the Port field and Cc
 the port maintainer(s).

-- 
Ticket URL: <https://trac.macports.org/ticket/37017#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS