[MacPorts] #36421: gq @ 1.2.1 build failure

[MacPorts]

#36421: gq @ 1.2.1 build failure
--------------------------------+----------------------
  Reporter:  sergey.bobrov83@…  |      Owner:  syzdek@…
      Type:  defect             |     Status:  new
  Priority:  Normal             |  Milestone:
 Component:  ports              |    Version:  2.1.2
Resolution:                     |   Keywords:
      Port:  gq                 |
--------------------------------+----------------------

Comment (by sergey.bobrov83@…):

 after
 {{{
 $ sudo port clean gq
 $ sudo port selfupdate
 $ sudo port install gq
 }}}
 i got the same
 {{{
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main intltool 0.50.2_0 exists in the ports tree
 :debug:main intltool 0.50.2_0  is the latest installed
 :debug:main intltool 0.50.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/intltool
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! intltool 0.50.2_0 >= intltool 0.50.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.1.0_0 exists in the ports tree
 :debug:main expat 2.1.0_0  is the latest installed
 :debug:main expat 2.1.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5.12 5.12.4_1 exists in the ports tree
 :debug:main perl5.12 5.12.4_1  is the latest installed
 :debug:main perl5.12 5.12.4_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdbm 1.10_2 exists in the ports tree
 :debug:main gdbm 1.10_2  is the latest installed
 :debug:main gdbm 1.10_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2  is the latest installed
 :debug:main gettext 0.18.1.1_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.14_0 exists in the ports tree
 :debug:main libiconv 1.14_0  is the latest installed
 :debug:main libiconv 1.14_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.9_1 exists in the ports tree
 :debug:main ncurses 5.9_1  is the latest installed
 :debug:main ncurses 5.9_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5.12-xml-parser 2.400.0_4 exists in the ports tree
 :debug:main p5.12-xml-parser 2.400.0_4 +universal is the latest installed
 :debug:main p5.12-xml-parser 2.400.0_4 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -xml-parser
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for livecheck.version
 :debug:main Re-registering default for configure.universal_args
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! p5.12-xml-parser 2.400.0_4 >= p5.12-xml-
 parser 2.400.0_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5.12-getopt-long 2.380.0_3 exists in the ports tree
 :debug:main p5.12-getopt-long 2.380.0_3  is the latest installed
 :debug:main p5.12-getopt-long 2.380.0_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -getopt-long
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for livecheck.version
 :debug:main Re-registering default for configure.universal_args
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! p5.12-getopt-long 2.380.0_3 >= p5.12
 -getopt-long 2.380.0_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5.12-pathtools 3.330.0_3 exists in the ports tree
 :debug:main p5.12-pathtools 3.330.0_3 +universal is the latest installed
 :debug:main p5.12-pathtools 3.330.0_3 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-pathtools
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for livecheck.version
 :debug:main Re-registering default for configure.universal_args
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! p5.12-pathtools 3.330.0_3 >=
 p5.12-pathtools 3.330.0_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5.12-scalar-list-utils 1.230.0_3 exists in the ports tree
 :debug:main p5.12-scalar-list-utils 1.230.0_3 +universal is the latest
 installed
 :debug:main p5.12-scalar-list-utils 1.230.0_3 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -scalar-list-utils
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for livecheck.version
 :debug:main Re-registering default for configure.universal_args
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! p5.12-scalar-list-utils 1.230.0_3 >= p5.12
 -scalar-list-utils 1.230.0_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main pkgconfig 0.27.1_1 exists in the ports tree
 :debug:main pkgconfig 0.27.1_1  is the latest installed
 :debug:main pkgconfig 0.27.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! pkgconfig 0.27.1_1 >= pkgconfig 0.27.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main glib2 2.32.4_0 exists in the ports tree
 :debug:main glib2 2.32.4_0  is the latest installed
 :debug:main glib2 2.32.4_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! glib2 2.32.4_0 >= glib2 2.32.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.7_0 exists in the ports tree
 :debug:main zlib 1.2.7_0  is the latest installed
 :debug:main zlib 1.2.7_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libffi 3.0.11_0 exists in the ports tree
 :debug:main libffi 3.0.11_0  is the latest installed
 :debug:main libffi 3.0.11_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libffi 3.0.11_0 >= libffi 3.0.11_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5 5.12.4_0 exists in the ports tree
 :debug:main perl5 5.12.4_0 +perl5_12 is the latest installed
 :debug:main perl5 5.12.4_0 +perl5_12 is active
 :debug:main Merging existing variants '+perl5_12' into variants
 :debug:main new fully merged portvariants: perl5_12 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Executing variant perl5_12 provides perl5_12
 :debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gtk2 2.24.12_0 exists in the ports tree
 :debug:main gtk2 2.24.12_0 +universal+x11 is the latest installed
 :debug:main gtk2 2.24.12_0 +universal+x11 is active
 :debug:main Merging existing variants '+universal+x11' into variants
 :debug:main new fully merged portvariants: universal + x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! gtk2 2.24.12_0 >= gtk2 2.24.12_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main atk 2.2.0_2 exists in the ports tree
 :debug:main atk 2.2.0_2 +universal is the latest installed
 :debug:main atk 2.2.0_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! atk 2.2.0_2 >= atk 2.2.0_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gobject-introspection 1.32.1_3 exists in the ports tree
 :debug:main gobject-introspection 1.32.1_3 +universal is the latest
 installed
 :debug:main gobject-introspection 1.32.1_3 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /gobject-introspection
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gobject-introspection 1.32.1_3 >= gobject-
 introspection 1.32.1_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cairo 1.12.2_1 exists in the ports tree
 :debug:main cairo 1.12.2_1 +universal+x11 is the latest installed
 :debug:main cairo 1.12.2_1 +universal+x11 is active
 :debug:main Merging existing variants '+universal+x11' into variants
 :debug:main new fully merged portvariants: universal + x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! cairo 1.12.2_1 >= cairo 1.12.2_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpixman 0.26.2_0 exists in the ports tree
 :debug:main libpixman 0.26.2_0 +universal is the latest installed
 :debug:main libpixman 0.26.2_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libpixman 0.26.2_0 >= libpixman 0.26.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main fontconfig 2.9.0_1 exists in the ports tree
 :debug:main fontconfig 2.9.0_1 +universal is the latest installed
 :debug:main fontconfig 2.9.0_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main freetype 2.4.10_0 exists in the ports tree
 :debug:main freetype 2.4.10_0 +universal is the latest installed
 :debug:main freetype 2.4.10_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! freetype 2.4.10_0 >= freetype 2.4.10_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0  is the latest installed
 :debug:main bzip2 1.0.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpng 1.5.12_0 exists in the ports tree
 :debug:main libpng 1.5.12_0  is the latest installed
 :debug:main libpng 1.5.12_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libpng 1.5.12_0 >= libpng 1.5.12_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xrender 0.9.7_0 exists in the ports tree
 :debug:main xrender 0.9.7_0 +universal is the latest installed
 :debug:main xrender 0.9.7_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libX11 1.5.0_0 exists in the ports tree
 :debug:main xorg-libX11 1.5.0_0 +universal is the latest installed
 :debug:main xorg-libX11 1.5.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libX11
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11 1.5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree
 :debug:main xorg-libXdmcp 1.1.1_0 +universal is the latest installed
 :debug:main xorg-libXdmcp 1.1.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXdmcp
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp
 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXau 1.0.7_0 exists in the ports tree
 :debug:main xorg-libXau 1.0.7_0 +universal is the latest installed
 :debug:main xorg-libXau 1.0.7_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXau
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xproto 7.0.23_0 exists in the ports tree
 :debug:main xorg-xproto 7.0.23_0  is the latest installed
 :debug:main xorg-xproto 7.0.23_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto
 7.0.23_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libxcb 1.8.1_2 exists in the ports tree
 :debug:main xorg-libxcb 1.8.1_2 +python27+universal is the latest
 installed
 :debug:main xorg-libxcb 1.8.1_2 +python27+universal is active
 :debug:main Merging existing variants '+python27+universal' into variants
 :debug:main new fully merged portvariants: universal + python27 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libxcb
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant python27 provides python27
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb 1.8.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-proto 1.7.1_0 exists in the ports tree
 :debug:main xorg-xcb-proto 1.7.1_0 +python27 is the latest installed
 :debug:main xorg-xcb-proto 1.7.1_0 +python27 is active
 :debug:main Merging existing variants '+python27' into variants
 :debug:main new fully merged portvariants: python27 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xcb-proto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Executing variant python27 provides python27
 :debug:main No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto
 1.7.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxml2 2.8.0_0 exists in the ports tree
 :debug:main libxml2 2.8.0_0 +universal is the latest installed
 :debug:main libxml2 2.8.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libxml2 2.8.0_0 >= libxml2 2.8.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xz 5.0.4_0 exists in the ports tree
 :debug:main xz 5.0.4_0  is the latest installed
 :debug:main xz 5.0.4_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main python27 2.7.3_0 exists in the ports tree
 :debug:main python27 2.7.3_0 +universal is the latest installed
 :debug:main python27 2.7.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.1c_0 exists in the ports tree
 :debug:main openssl 1.0.1c_0  is the latest installed
 :debug:main openssl 1.0.1c_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main sqlite3 3.7.14_1 exists in the ports tree
 :debug:main sqlite3 3.7.14_1  is the latest installed
 :debug:main sqlite3 3.7.14_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! sqlite3 3.7.14_1 >= sqlite3 3.7.14_1
 :debug:main epoch: in tree: 20090923 installed: 20090923
 :debug:main libedit 20120601-3.0_0 exists in the ports tree
 :debug:main libedit 20120601-3.0_0  is the latest installed
 :debug:main libedit 20120601-3.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit
 20120601-3.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main db46 4.6.21_6 exists in the ports tree
 :debug:main db46 4.6.21_6  is the latest installed
 :debug:main db46 4.6.21_6 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python_select 0.3_1 exists in the ports tree
 :debug:main python_select 0.3_1  is the latest installed
 :debug:main python_select 0.3_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
 :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
 :debug:main xorg-libpthread-stubs 0.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libpthread-stubs
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
 libpthread-stubs 0.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-kbproto 1.0.6_0 exists in the ports tree
 :debug:main xorg-kbproto 1.0.6_0  is the latest installed
 :debug:main xorg-kbproto 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-kbproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto
 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
 :debug:main xorg-renderproto 0.11.1_0  is the latest installed
 :debug:main xorg-renderproto 0.11.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-renderproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
 renderproto 0.11.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-util 0.3.9_0 exists in the ports tree
 :debug:main xorg-xcb-util 0.3.9_0 +universal is the latest installed
 :debug:main xorg-xcb-util 0.3.9_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xcb-util
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util
 0.3.9_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main pango 1.30.1_2 exists in the ports tree
 :debug:main pango 1.30.1_2 +universal+x11 is the latest installed
 :debug:main pango 1.30.1_2 +universal+x11 is active
 :debug:main Merging existing variants '+universal+x11' into variants
 :debug:main new fully merged portvariants: universal + x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main Executing variant x11 provides x11
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! pango 1.30.1_2 >= pango 1.30.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main Xft2 2.3.1_0 exists in the ports tree
 :debug:main Xft2 2.3.1_0 +universal is the latest installed
 :debug:main Xft2 2.3.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! Xft2 2.3.1_0 >= Xft2 2.3.1_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main gdk-pixbuf2 2.26.4_0 exists in the ports tree
 :debug:main gdk-pixbuf2 2.26.4_0 +universal is the latest installed
 :debug:main gdk-pixbuf2 2.26.4_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics
 /gdk-pixbuf2
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gdk-pixbuf2 2.26.4_0 >= gdk-pixbuf2
 2.26.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jasper 1.900.1_9 exists in the ports tree
 :debug:main jasper 1.900.1_9 +universal is the latest installed
 :debug:main jasper 1.900.1_9 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jpeg 8d_0 exists in the ports tree
 :debug:main jpeg 8d_0 +universal is the latest installed
 :debug:main jpeg 8d_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main tiff 3.9.5_0 exists in the ports tree
 :debug:main tiff 3.9.5_0 +universal is the latest installed
 :debug:main tiff 3.9.5_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXi 1.6.1_0 exists in the ports tree
 :debug:main xorg-libXi 1.6.1_0 +universal is the latest installed
 :debug:main xorg-libXi 1.6.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXi
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXi 1.6.1_0 >= xorg-libXi 1.6.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXext 1.3.1_0 exists in the ports tree
 :debug:main xorg-libXext 1.3.1_0 +universal is the latest installed
 :debug:main xorg-libXext 1.3.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXext
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext
 1.3.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xextproto 7.2.1_0 exists in the ports tree
 :debug:main xorg-xextproto 7.2.1_0  is the latest installed
 :debug:main xorg-xextproto 7.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xextproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto
 7.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-inputproto 2.2_0 exists in the ports tree
 :debug:main xorg-inputproto 2.2_0  is the latest installed
 :debug:main xorg-inputproto 2.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-inputproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-inputproto 2.2_0 >= xorg-inputproto
 2.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree
 :debug:main xorg-libXrandr 1.3.2_0 +universal is the latest installed
 :debug:main xorg-libXrandr 1.3.2_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXrandr
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr
 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-randrproto 1.4.0_0 exists in the ports tree
 :debug:main xorg-randrproto 1.4.0_0  is the latest installed
 :debug:main xorg-randrproto 1.4.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-randrproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-randrproto 1.4.0_0 >= xorg-randrproto
 1.4.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcursor 1.1.13_0 exists in the ports tree
 :debug:main xorg-libXcursor 1.1.13_0 +universal is the latest installed
 :debug:main xorg-libXcursor 1.1.13_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXcursor
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXcursor 1.1.13_0 >= xorg-
 libXcursor 1.1.13_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXfixes 5.0_0 exists in the ports tree
 :debug:main xorg-libXfixes 5.0_0 +universal is the latest installed
 :debug:main xorg-libXfixes 5.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXfixes
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes
 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-fixesproto 5.0_0 exists in the ports tree
 :debug:main xorg-fixesproto 5.0_0  is the latest installed
 :debug:main xorg-fixesproto 5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-fixesproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto
 5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXinerama 1.1.2_0 exists in the ports tree
 :debug:main xorg-libXinerama 1.1.2_0 +universal is the latest installed
 :debug:main xorg-libXinerama 1.1.2_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXinerama
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXinerama 1.1.2_0 >= xorg-
 libXinerama 1.1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-xineramaproto 1.2.1_0  is the latest installed
 :debug:main xorg-xineramaproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-xineramaproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-
 xineramaproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
 :debug:main xorg-libXdamage 1.1.3_0 +universal is the latest installed
 :debug:main xorg-libXdamage 1.1.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXdamage
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage
 1.1.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-damageproto 1.2.1_0  is the latest installed
 :debug:main xorg-damageproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-damageproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-
 damageproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
 :debug:main xorg-libXcomposite 0.4.3_0 +universal is the latest installed
 :debug:main xorg-libXcomposite 0.4.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-libXcomposite
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
 libXcomposite 0.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
 :debug:main xorg-compositeproto 0.4.2_0  is the latest installed
 :debug:main xorg-compositeproto 0.4.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
 /xorg-compositeproto
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
 compositeproto 0.4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main shared-mime-info 1.0_0 exists in the ports tree
 :debug:main shared-mime-info 1.0_0 +universal is the latest installed
 :debug:main shared-mime-info 1.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
 /shared-mime-info
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-info
 1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
 :debug:main hicolor-icon-theme 0.12_0  is the latest installed
 :debug:main hicolor-icon-theme 0.12_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /hicolor-icon-theme
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-
 theme 0.12_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main openldap 2.4.31_1 exists in the ports tree
 :debug:main openldap 2.4.31_1  is the latest installed
 :debug:main openldap 2.4.31_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/openldap
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! openldap 2.4.31_1 >= openldap 2.4.31_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main tcp_wrappers 20_2 exists in the ports tree
 :debug:main tcp_wrappers 20_2  is the latest installed
 :debug:main tcp_wrappers 20_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/tcp_wrappers
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! tcp_wrappers 20_2 >= tcp_wrappers 20_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cyrus-sasl2 2.1.25_2 exists in the ports tree
 :debug:main cyrus-sasl2 2.1.25_2 +kerberos is the latest installed
 :debug:main cyrus-sasl2 2.1.25_2 +kerberos is active
 :debug:main Merging existing variants '+kerberos' into variants
 :debug:main new fully merged portvariants: kerberos +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security
 /cyrus-sasl2
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant kerberos provides kerberos
 :debug:main No need to upgrade! cyrus-sasl2 2.1.25_2 >= cyrus-sasl2
 2.1.25_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main kerberos5 1.7.2_0 exists in the ports tree
 :debug:main kerberos5 1.7.2_0  is the latest installed
 :debug:main kerberos5 1.7.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/kerberos5
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! kerberos5 1.7.2_0 >= kerberos5 1.7.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main icu 4.8.1_0 exists in the ports tree
 :debug:main icu 4.8.1_0  is the latest installed
 :debug:main icu 4.8.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! icu 4.8.1_0 >= icu 4.8.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgnome-keyring 2.30.1_1 exists in the ports tree
 :debug:main libgnome-keyring 2.30.1_1  is the latest installed
 :debug:main libgnome-keyring 2.30.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /libgnome-keyring
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libgnome-keyring 2.30.1_1 >= libgnome-
 keyring 2.30.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgcrypt 1.5.0_0 exists in the ports tree
 :debug:main libgcrypt 1.5.0_0  is the latest installed
 :debug:main libgcrypt 1.5.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgcrypt
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libgcrypt 1.5.0_0 >= libgcrypt 1.5.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgpg-error 1.10_0 exists in the ports tree
 :debug:main libgpg-error 1.10_0  is the latest installed
 :debug:main libgpg-error 1.10_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
 /libgpg-error
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main gnome-keyring 2.30.3_5 exists in the ports tree
 :debug:main gnome-keyring 2.30.3_5  is the latest installed
 :debug:main gnome-keyring 2.30.3_5  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /gnome-keyring
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gnome-keyring 2.30.3_5 >= gnome-keyring
 2.30.3_5
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libtasn1 2.11_0 exists in the ports tree
 :debug:main libtasn1 2.11_0  is the latest installed
 :debug:main libtasn1 2.11_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtasn1
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libtasn1 2.11_0 >= libtasn1 2.11_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main gconf 2.28.1_4 exists in the ports tree
 :debug:main gconf 2.28.1_4 +universal is the latest installed
 :debug:main gconf 2.28.1_4 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gconf
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gconf 2.28.1_4 >= gconf 2.28.1_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus-glib 0.100_0 exists in the ports tree
 :debug:main dbus-glib 0.100_0 +universal is the latest installed
 :debug:main dbus-glib 0.100_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
 /dbus-glib
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! dbus-glib 0.100_0 >= dbus-glib 0.100_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus 1.4.20_1 exists in the ports tree
 :debug:main dbus 1.4.20_1 +startupitem+universal is the latest installed
 :debug:main dbus 1.4.20_1 +startupitem+universal is active
 :debug:main Merging existing variants '+startupitem+universal' into
 variants
 :debug:main new fully merged portvariants: universal + startupitem +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main Executing variant startupitem provides startupitem
 :debug:main No need to upgrade! dbus 1.4.20_1 >= dbus 1.4.20_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main policykit 0.103_2 exists in the ports tree
 :debug:main policykit 0.103_2 +universal is the latest installed
 :debug:main policykit 0.103_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security/policykit
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! policykit 0.103_2 >= policykit 0.103_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main eggdbus 0.6_1 exists in the ports tree
 :debug:main eggdbus 0.6_1 +universal is the latest installed
 :debug:main eggdbus 0.6_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/eggdbus
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! eggdbus 0.6_1 >= eggdbus 0.6_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main orbit2 2.14.19_1 exists in the ports tree
 :debug:main orbit2 2.14.19_1 +universal is the latest installed
 :debug:main orbit2 2.14.19_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orbit2
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! orbit2 2.14.19_1 >= orbit2 2.14.19_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libidl 0.8.14_2 exists in the ports tree
 :debug:main libidl 0.8.14_2 +universal is the latest installed
 :debug:main libidl 0.8.14_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libidl
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libidl 0.8.14_2 >= libidl 0.8.14_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libglade2 2.6.4_6 exists in the ports tree
 :debug:main libglade2 2.6.4_6  is the latest installed
 :debug:main libglade2 2.6.4_6  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/libglade2
 :debug:main OS darwin/12.1.0 (Mac OS X 10.8) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main No need to upgrade! libglade2 2.6.4_6 >= libglade2 2.6.4_6
 :msg:main --->  Computing dependencies for gq:info:main .:debug:main gq
 has no conflicts
 :debug:main Searching for dependency: intltool
 :debug:main Found Dependency: receipt exists for intltool
 :debug:main Searching for dependency: pkgconfig
 :debug:main Found Dependency: receipt exists for pkgconfig
 :debug:main Searching for dependency: glib2
 :debug:main Found Dependency: receipt exists for glib2
 :debug:main Searching for dependency: gtk2
 :debug:main Found Dependency: receipt exists for gtk2
 :debug:main Searching for dependency: expat
 :debug:main Found Dependency: receipt exists for expat
 :debug:main Searching for dependency: openldap
 :debug:main Found Dependency: receipt exists for openldap
 :debug:main Searching for dependency: openssl
 :debug:main Found Dependency: receipt exists for openssl
 :debug:main Searching for dependency: libgnome-keyring
 :debug:main Found Dependency: receipt exists for libgnome-keyring
 :debug:main Searching for dependency: libglade2
 :debug:main Found Dependency: receipt exists for libglade2
 :msg:main
 :debug:main Executing org.macports.main (gq)
 :debug:main changing euid/egid - current euid: 0 - current egid: 0
 :debug:main egid changed to: 501
 :debug:main euid changed to: 502
 :debug:main Skipping completed org.macports.archivefetch (gq)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.fetch (gq)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.checksum (gq)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.extract (gq)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.patch (gq)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.configure (gq)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:build build phase started at Tue Oct  2 17:47:20 EEST 2012
 :notice:build --->  Building gq
 :debug:build Executing org.macports.build (gq)
 :debug:build Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.8'
 :debug:build Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1"
 && /usr/bin/make -j2 -w all'
 :debug:build Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1"
 && /usr/bin/make -j2 -w all
 :info:build make: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1'
 :info:build /usr/bin/make  all-recursive
 :info:build make[1]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1'
 :info:build Making all in data
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/data'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/data'
 :info:build Making all in icons
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/icons'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/icons'
 :info:build Making all in pixmaps
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/pixmaps'
 :info:build make[2]: Nothing to be done for `all'.
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/pixmaps'
 :info:build Making all in src
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/src'
 :info:build /usr/bin/make  all-am
 :info:build make[3]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/src'
 :info:build if /usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I..  -Wall -W -Wno-
 unused -Wmissing-declarations -Wcast-align -Wpointer-arith -Wfloat-equal
 -D_REENTRANT -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include
 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
 -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0
 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include/pixman-1
 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15
 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libglade-2.0
 -I/opt/local/include/libxml2   -I/opt/local/include   -I/opt/local/include
 -I/opt/local/include -I/opt/local/include  -pipe -O2 -arch x86_64 -MT
 configfile.o -MD -MP -MF ".deps/configfile.Tpo" -c -o configfile.o
 configfile.c; \
 :info:build     then mv -f ".deps/configfile.Tpo" ".deps/configfile.Po";
 else rm -f ".deps/configfile.Tpo"; exit 1; fi
 :info:build if /usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I..  -Wall -W -Wno-
 unused -Wmissing-declarations -Wcast-align -Wpointer-arith -Wfloat-equal
 -D_REENTRANT -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include
 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
 -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0
 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include/pixman-1
 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15
 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libglade-2.0
 -I/opt/local/include/libxml2   -I/opt/local/include   -I/opt/local/include
 -I/opt/local/include -I/opt/local/include  -pipe -O2 -arch x86_64 -MT
 debug.o -MD -MP -MF ".deps/debug.Tpo" -c -o debug.o debug.c; \
 :info:build     then mv -f ".deps/debug.Tpo" ".deps/debug.Po"; else rm -f
 ".deps/debug.Tpo"; exit 1; fi
 :info:build debug.c:58:30: warning: format specifies type 'int' but the
 argument has type 'size_t' (aka 'unsigned long') [-Wformat]
 :info:build           printf("+ gq_malloc: %s (%d bytes @ 0x%x)\n", msg,
 size,
 :info:build                                    ~^
 ~~~~
 :info:build                                    %zd
 :info:build 1 warning generated.
 :info:build In file included from configfile.c:44:
 :info:build In file included from ./gq-server-list.h:29:
 :info:build /opt/local/include/glib-2.0/glib/gmacros.h:32:2: error: "Only
 <glib.h> can be included directly."
 :info:build #error "Only <glib.h> can be included directly."
 :info:build  ^
 :info:build if /usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I..  -Wall -W -Wno-
 unused -Wmissing-declarations -Wcast-align -Wpointer-arith -Wfloat-equal
 -D_REENTRANT -I/opt/local/include/glib-2.0
 -I/opt/local/lib/glib-2.0/include -I/opt/local/include
 -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include
 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo
 -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0
 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include/pixman-1
 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15
 -I/opt/local/include/gnome-keyring-1 -I/opt/local/include/libglade-2.0
 -I/opt/local/include/libxml2   -I/opt/local/include   -I/opt/local/include
 -I/opt/local/include -I/opt/local/include  -pipe -O2 -arch x86_64 -MT
 dt_binary.o -MD -MP -MF ".deps/dt_binary.Tpo" -c -o dt_binary.o
 dt_binary.c; \
 :info:build     then mv -f ".deps/dt_binary.Tpo" ".deps/dt_binary.Po";
 else rm -f ".deps/dt_binary.Tpo"; exit 1; fi
 :info:build configfile.c:387:28: warning: unused parameter 'list'
 [-Wunused-parameter]
 :info:build write_server(GQServerList* list, GqServer* server, gpointer
 user_data) {
 :info:build                            ^
 :info:build configfile.c:731:17: warning: unused parameter 'user_data'
 [-Wunused-parameter]
 :info:build                             gpointer user_data)
 :info:build                                      ^
 :info:build 2 warnings and 1 error generated.
 :info:build make[3]: *** [configfile.o] Error 1
 :info:build make[3]: *** Waiting for unfinished jobs....
 :info:build dt_binary.c:98:61: warning: unused parameter 'form' [-Wunused-
 parameter]
 :info:build static void dt_binary_set_encoding_in_menu(struct formfill
 *form,
 :info:build                                                             ^
 :info:build dt_binary.c:121:53: warning: unused parameter 'widget'
 [-Wunused-parameter]
 :info:build static void dt_binary_encoding_activated(GtkWidget *widget,
 :info:build                                                     ^
 :info:build dt_binary.c:201:55: warning: unused parameter 'form'
 [-Wunused-parameter]
 :info:build GtkWidget *dt_binary_get_data_widget(struct formfill *form,
 :info:build                                                       ^
 :info:build dt_binary.c:202:21: warning: unused parameter 'activatefunc'
 [-Wunused-parameter]
 :info:build                                      GCallback *activatefunc,
 :info:build                                                 ^
 :info:build dt_binary.c:203:19: warning: unused parameter 'funcdata'
 [-Wunused-parameter]
 :info:build                                      gpointer funcdata)
 :info:build                                               ^
 :info:build dt_binary.c:368:65: warning: unused parameter 'form'
 [-Wunused-parameter]
 :info:build static GByteArray *dt_binary_get_data_internal(struct formfill
 *form,
 :info:build
 ^
 :info:build dt_binary.c:412:61: warning: unused parameter 'form'
 [-Wunused-parameter]
 :info:build static void dt_binary_delete_data_internal(struct formfill
 *form,
 :info:build                                                             ^
 :info:build dt_binary.c:552:41: warning: unused parameter 'self'
 [-Wunused-parameter]
 :info:build gq_display_binary_init(GQDisplayBinary* self) {}
 :info:build                                         ^
 :info:build 8 warnings generated.
 :info:build make[3]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/src'
 :info:build make[2]: *** [all] Error 2
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1/src'
 :info:build make[1]: *** [all-recursive] Error 1
 :info:build make[1]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1'
 :info:build make: *** [all] Error 2
 :info:build make: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1'
 :info:build Command failed:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/work/gq-1.2.1"
 && /usr/bin/make -j2 -w all
 :info:build Exit code: 2
 :error:build org.macports.build for port gq returned: command execution
 failed
 :debug:build Error code: CHILDSTATUS 91303 2
 :debug:build Backtrace: command execution failed
     while executing
 "system -nice 0 $fullcmdstring"
     ("eval" body line 1)
     invoked from within
 "eval system $notty $nice \$fullcmdstring"
     invoked from within
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: targets not executed for gq: org.macports.activate
 org.macports.build org.macports.destroot org.macports.install
 :notice:build Please see the log file for port gq for details:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_gq/gq/main.log
 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/36421#comment:3>
MacPorts <http://www.macports.org/>
Ports system for Mac OS