[MacPorts] #36206: lib2geom 0.2.0 Build execution failed

Tue Sep 18 12:29:47 PDT 2012

#36206: lib2geom 0.2.0 Build execution failed
--------------------------+--------------------------------
  Reporter:  z.almeraj@…  |      Owner:  macports-tickets@…
      Type:  defect       |     Status:  new
  Priority:  Normal       |  Milestone:
 Component:  ports        |    Version:  2.0.3
Resolution:               |   Keywords:
      Port:  lib2geom     |
--------------------------+--------------------------------

Comment (by z.almeraj@…):

 Replying to [comment:3 ciserlohn@…]:
 > @z.almeraj:
 > Version 2.0.3? If this is your MacPorts version please do a selfupdate
 first. The current version is 2.1.2. Then try a clean install and attach
 the log if it fails:
 > {{{
 > $ sudo port selfupdate
 > $ sudo port clean lib2geom
 > $ sudo port -d install libe2geom
 > }}}

 I did as you mentioned. I had 2.1.2 installed. My mistake. The debug log
 is below

 {{{

 Zainab-AlMerajs-MacBook-Pro:~ zainabalmeraj$ sudo port selfupdate
 Password:
 --->  Updating MacPorts base sources using rsync
 MacPorts base version 2.1.2 installed,
 MacPorts base version 2.1.2 downloaded.
 --->  Updating the ports tree
 --->  MacPorts base is already the latest version

 The ports tree has been updated. To upgrade your installed ports, you
 should run
   port upgrade outdated
 Zainab-AlMerajs-MacBook-Pro:~ zainabalmeraj$ sudo port clean lib2geom
 --->  Cleaning lib2geom
 Zainab-AlMerajs-MacBook-Pro:~ zainabalmeraj$ sudo port -d install lib2geom
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Attempting ln -sf
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: Starting logging for lib2geom
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gtkmm 2.24.2_1 exists in the ports tree
 DEBUG: gtkmm 2.24.2_1  is the latest installed
 DEBUG: gtkmm 2.24.2_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtkmm
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! gtkmm 2.24.2_1 >= gtkmm 2.24.2_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gtk2 2.24.12_0 exists in the ports tree
 DEBUG: gtk2 2.24.12_0 +x11 is the latest installed
 DEBUG: gtk2 2.24.12_0 +x11 is active
 DEBUG: Merging existing variants '+x11' into variants
 DEBUG: new fully merged portvariants: x11 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk2
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Executing variant x11 provides x11
 DEBUG: No need to upgrade! gtk2 2.24.12_0 >= gtk2 2.24.12_0
 DEBUG: epoch: in tree: 2 installed: 2
 DEBUG: atk 2.2.0_2 exists in the ports tree
 DEBUG: atk 2.2.0_2  is the latest installed
 DEBUG: atk 2.2.0_2  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! atk 2.2.0_2 >= atk 2.2.0_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: glib2 2.32.4_0 exists in the ports tree
 DEBUG: glib2 2.32.4_0  is the latest installed
 DEBUG: glib2 2.32.4_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! glib2 2.32.4_0 >= glib2 2.32.4_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.18.1.1_2 exists in the ports tree
 DEBUG: gettext 0.18.1.1_2  is the latest installed
 DEBUG: gettext 0.18.1.1_2  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.14_0 exists in the ports tree
 DEBUG: libiconv 1.14_0  is the latest installed
 DEBUG: libiconv 1.14_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.9_1 exists in the ports tree
 DEBUG: ncurses 5.9_1  is the latest installed
 DEBUG: ncurses 5.9_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.1.0_0 exists in the ports tree
 DEBUG: expat 2.1.0_0  is the latest installed
 DEBUG: expat 2.1.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.7_0 exists in the ports tree
 DEBUG: zlib 1.2.7_0  is the latest installed
 DEBUG: zlib 1.2.7_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libffi 3.0.11_0 exists in the ports tree
 DEBUG: libffi 3.0.11_0  is the latest installed
 DEBUG: libffi 3.0.11_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! libffi 3.0.11_0 >= libffi 3.0.11_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.12.4_0 exists in the ports tree
 DEBUG: perl5 5.12.4_0 +perl5_12 is the latest installed
 DEBUG: perl5 5.12.4_0 +perl5_12 is active
 DEBUG: Merging existing variants '+perl5_12' into variants
 DEBUG: new fully merged portvariants: perl5_12 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: universal_variant is false, so not adding the default universal
 variant
 DEBUG: Executing variant perl5_12 provides perl5_12
 DEBUG: No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.12 5.12.4_1 exists in the ports tree
 DEBUG: perl5.12 5.12.4_1  is the latest installed
 DEBUG: perl5.12 5.12.4_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gdbm 1.10_2 exists in the ports tree
 DEBUG: gdbm 1.10_2  is the latest installed
 DEBUG: gdbm 1.10_2  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gobject-introspection 1.32.1_3 exists in the ports tree
 DEBUG: gobject-introspection 1.32.1_3  is the latest installed
 DEBUG: gobject-introspection 1.32.1_3  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gobject-introspection
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! gobject-introspection 1.32.1_3 >= gobject-
 introspection 1.32.1_3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: cairo 1.12.2_1 exists in the ports tree
 DEBUG: cairo 1.12.2_1 +x11 is the latest installed
 DEBUG: cairo 1.12.2_1 +x11 is active
 DEBUG: Merging existing variants '+x11' into variants
 DEBUG: new fully merged portvariants: x11 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Executing variant x11 provides x11
 DEBUG: No need to upgrade! cairo 1.12.2_1 >= cairo 1.12.2_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpixman 0.26.2_0 exists in the ports tree
 DEBUG: libpixman 0.26.2_0  is the latest installed
 DEBUG: libpixman 0.26.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! libpixman 0.26.2_0 >= libpixman 0.26.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: fontconfig 2.9.0_1 exists in the ports tree
 DEBUG: fontconfig 2.9.0_1  is the latest installed
 DEBUG: fontconfig 2.9.0_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freetype 2.4.10_0 exists in the ports tree
 DEBUG: freetype 2.4.10_0  is the latest installed
 DEBUG: freetype 2.4.10_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! freetype 2.4.10_0 >= freetype 2.4.10_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: bzip2 1.0.6_0 exists in the ports tree
 DEBUG: bzip2 1.0.6_0  is the latest installed
 DEBUG: bzip2 1.0.6_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpng 1.5.12_0 exists in the ports tree
 DEBUG: libpng 1.5.12_0  is the latest installed
 DEBUG: libpng 1.5.12_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! libpng 1.5.12_0 >= libpng 1.5.12_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xrender 0.9.7_0 exists in the ports tree
 DEBUG: xrender 0.9.7_0  is the latest installed
 DEBUG: xrender 0.9.7_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.5.0_0 exists in the ports tree
 DEBUG: xorg-libX11 1.5.0_0  is the latest installed
 DEBUG: xorg-libX11 1.5.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11 1.5.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.1.1_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.1.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.7_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.7_0  is the latest installed
 DEBUG: xorg-libXau 1.0.7_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.23_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.23_0  is the latest installed
 DEBUG: xorg-xproto 7.0.23_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto 7.0.23_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libxcb 1.8.1_2 exists in the ports tree
 DEBUG: xorg-libxcb 1.8.1_2 +python26 is the latest installed
 DEBUG: xorg-libxcb 1.8.1_2 +python26 is active
 DEBUG: Merging existing variants '+python26' into variants
 DEBUG: new fully merged portvariants: python26 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libxcb
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Executing variant python26 provides python26
 DEBUG: No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb 1.8.1_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcb-proto 1.7.1_0 exists in the ports tree
 DEBUG: xorg-xcb-proto 1.7.1_0 +python26 is the latest installed
 DEBUG: xorg-xcb-proto 1.7.1_0 +python26 is active
 DEBUG: Merging existing variants '+python26' into variants
 DEBUG: new fully merged portvariants: python26 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-proto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: Executing variant python26 provides python26
 DEBUG: No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto
 1.7.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libxml2 2.8.0_0 exists in the ports tree
 DEBUG: libxml2 2.8.0_0  is the latest installed
 DEBUG: libxml2 2.8.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! libxml2 2.8.0_0 >= libxml2 2.8.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xz 5.0.4_0 exists in the ports tree
 DEBUG: xz 5.0.4_0  is the latest installed
 DEBUG: xz 5.0.4_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/xz
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: python26 2.6.8_0 exists in the ports tree
 DEBUG: python26 2.6.8_0  is the latest installed
 DEBUG: python26 2.6.8_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! python26 2.6.8_0 >= python26 2.6.8_0
 DEBUG: epoch: in tree: 1 installed: 1
 DEBUG: openssl 1.0.1c_0 exists in the ports tree
 DEBUG: openssl 1.0.1c_0  is the latest installed
 DEBUG: openssl 1.0.1c_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: sqlite3 3.7.14_1 exists in the ports tree
 DEBUG: sqlite3 3.7.14_1  is the latest installed
 DEBUG: sqlite3 3.7.14_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! sqlite3 3.7.14_1 >= sqlite3 3.7.14_1
 DEBUG: epoch: in tree: 20090923 installed: 20090923
 DEBUG: libedit 20120601-3.0_0 exists in the ports tree
 DEBUG: libedit 20120601-3.0_0  is the latest installed
 DEBUG: libedit 20120601-3.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! libedit 20120601-3.0_0 >= libedit
 20120601-3.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: db46 4.6.21_6 exists in the ports tree
 DEBUG: db46 4.6.21_6  is the latest installed
 DEBUG: db46 4.6.21_6  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Executing variant java provides java
 DEBUG: Skipping upgrade since db46 4.6.21_6 >= db46 4.6.21_6, even though
 installed variants "" do not match "+java".
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: python_select 0.3_1 exists in the ports tree
 DEBUG: python_select 0.3_1  is the latest installed
 DEBUG: python_select 0.3_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 DEBUG: universal_variant is false, so not adding the default universal
 variant
 DEBUG: No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libpthread-stubs 0.3_0 exists in the ports tree
 DEBUG: xorg-libpthread-stubs 0.3_0  is the latest installed
 DEBUG: xorg-libpthread-stubs 0.3_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libpthread-stubs
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-
 stubs 0.3_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.6_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.6_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.6_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-renderproto 0.11.1_0 exists in the ports tree
 DEBUG: xorg-renderproto 0.11.1_0  is the latest installed
 DEBUG: xorg-renderproto 0.11.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto
 0.11.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcb-util 0.3.9_0 exists in the ports tree
 DEBUG: xorg-xcb-util 0.3.9_0  is the latest installed
 DEBUG: xorg-xcb-util 0.3.9_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-util
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util 0.3.9_0
 DEBUG: epoch: in tree: 2 installed: 2
 DEBUG: python27 2.7.3_0 exists in the ports tree
 DEBUG: python27 2.7.3_0  is the latest installed
 DEBUG: python27 2.7.3_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
 DEBUG: epoch: in tree: 1 installed: 1
 DEBUG: pango 1.30.1_2 exists in the ports tree
 DEBUG: pango 1.30.1_2 +x11 is the latest installed
 DEBUG: pango 1.30.1_2 +x11 is active
 DEBUG: Merging existing variants '+x11' into variants
 DEBUG: new fully merged portvariants: x11 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Executing variant x11 provides x11
 DEBUG: No need to upgrade! pango 1.30.1_2 >= pango 1.30.1_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: Xft2 2.3.1_0 exists in the ports tree
 DEBUG: Xft2 2.3.1_0  is the latest installed
 DEBUG: Xft2 2.3.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! Xft2 2.3.1_0 >= Xft2 2.3.1_0
 DEBUG: epoch: in tree: 2 installed: 2
 DEBUG: gdk-pixbuf2 2.26.3_0 exists in the ports tree
 DEBUG: gdk-pixbuf2 2.26.3_0  is the latest installed
 DEBUG: gdk-pixbuf2 2.26.3_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics
 /gdk-pixbuf2
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! gdk-pixbuf2 2.26.3_0 >= gdk-pixbuf2 2.26.3_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jasper 1.900.1_9 exists in the ports tree
 DEBUG: jasper 1.900.1_9  is the latest installed
 DEBUG: jasper 1.900.1_9  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jpeg 8d_0 exists in the ports tree
 DEBUG: jpeg 8d_0  is the latest installed
 DEBUG: jpeg 8d_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tiff 3.9.5_0 exists in the ports tree
 DEBUG: tiff 3.9.5_0  is the latest installed
 DEBUG: tiff 3.9.5_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXi 1.6.1_0 exists in the ports tree
 DEBUG: xorg-libXi 1.6.1_0  is the latest installed
 DEBUG: xorg-libXi 1.6.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXi
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXi 1.6.1_0 >= xorg-libXi 1.6.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXext 1.3.1_0 exists in the ports tree
 DEBUG: xorg-libXext 1.3.1_0  is the latest installed
 DEBUG: xorg-libXext 1.3.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext 1.3.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.2.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.2.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.2.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto
 7.2.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.2_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.2_0  is the latest installed
 DEBUG: xorg-inputproto 2.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-inputproto 2.2_0 >= xorg-inputproto 2.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXrandr 1.3.2_0 exists in the ports tree
 DEBUG: xorg-libXrandr 1.3.2_0  is the latest installed
 DEBUG: xorg-libXrandr 1.3.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr
 1.3.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-randrproto 1.4.0_0 exists in the ports tree
 DEBUG: xorg-randrproto 1.4.0_0  is the latest installed
 DEBUG: xorg-randrproto 1.4.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 randrproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-randrproto 1.4.0_0 >= xorg-randrproto
 1.4.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXcursor 1.1.13_0 exists in the ports tree
 DEBUG: xorg-libXcursor 1.1.13_0  is the latest installed
 DEBUG: xorg-libXcursor 1.1.13_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcursor
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXcursor 1.1.13_0 >= xorg-libXcursor
 1.1.13_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXfixes 5.0_0 exists in the ports tree
 DEBUG: xorg-libXfixes 5.0_0  is the latest installed
 DEBUG: xorg-libXfixes 5.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXfixes
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes 5.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-fixesproto 5.0_0 exists in the ports tree
 DEBUG: xorg-fixesproto 5.0_0  is the latest installed
 DEBUG: xorg-fixesproto 5.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 fixesproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXinerama 1.1.2_0 exists in the ports tree
 DEBUG: xorg-libXinerama 1.1.2_0  is the latest installed
 DEBUG: xorg-libXinerama 1.1.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXinerama
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXinerama 1.1.2_0 >= xorg-libXinerama
 1.1.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xineramaproto 1.2.1_0 exists in the ports tree
 DEBUG: xorg-xineramaproto 1.2.1_0  is the latest installed
 DEBUG: xorg-xineramaproto 1.2.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xineramaproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-
 xineramaproto 1.2.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdamage 1.1.3_0 exists in the ports tree
 DEBUG: xorg-libXdamage 1.1.3_0  is the latest installed
 DEBUG: xorg-libXdamage 1.1.3_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdamage
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage
 1.1.3_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-damageproto 1.2.1_0 exists in the ports tree
 DEBUG: xorg-damageproto 1.2.1_0  is the latest installed
 DEBUG: xorg-damageproto 1.2.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 damageproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-damageproto
 1.2.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXcomposite 0.4.3_0 exists in the ports tree
 DEBUG: xorg-libXcomposite 0.4.3_0  is the latest installed
 DEBUG: xorg-libXcomposite 0.4.3_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcomposite
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
 libXcomposite 0.4.3_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-compositeproto 0.4.2_0 exists in the ports tree
 DEBUG: xorg-compositeproto 0.4.2_0  is the latest installed
 DEBUG: xorg-compositeproto 0.4.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 compositeproto
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
 compositeproto 0.4.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: shared-mime-info 1.0_0 exists in the ports tree
 DEBUG: shared-mime-info 1.0_0  is the latest installed
 DEBUG: shared-mime-info 1.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /shared-mime-info
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-info
 1.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: hicolor-icon-theme 0.12_0 exists in the ports tree
 DEBUG: hicolor-icon-theme 0.12_0  is the latest installed
 DEBUG: hicolor-icon-theme 0.12_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /hicolor-icon-theme
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme
 0.12_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: glibmm 2.32.1_0 exists in the ports tree
 DEBUG: glibmm 2.32.1_0  is the latest installed
 DEBUG: glibmm 2.32.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glibmm
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! glibmm 2.32.1_0 >= glibmm 2.32.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libsigcxx2 2.2.10_0 exists in the ports tree
 DEBUG: libsigcxx2 2.2.10_0  is the latest installed
 DEBUG: libsigcxx2 2.2.10_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsigcxx2
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! libsigcxx2 2.2.10_0 >= libsigcxx2 2.2.10_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: cairomm 1.10.0_1 exists in the ports tree
 DEBUG: cairomm 1.10.0_1  is the latest installed
 DEBUG: cairomm 1.10.0_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairomm
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! cairomm 1.10.0_1 >= cairomm 1.10.0_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pangomm 2.28.4_1 exists in the ports tree
 DEBUG: pangomm 2.28.4_1  is the latest installed
 DEBUG: pangomm 2.28.4_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pangomm
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! pangomm 2.28.4_1 >= pangomm 2.28.4_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: atkmm 2.22.6_0 exists in the ports tree
 DEBUG: atkmm 2.22.6_0  is the latest installed
 DEBUG: atkmm 2.22.6_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/atkmm
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! atkmm 2.22.6_0 >= atkmm 2.22.6_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: boost 1.50.0_0 exists in the ports tree
 DEBUG: boost 1.50.0_0 +no_single+no_static is the latest installed
 DEBUG: boost 1.50.0_0 +no_single+no_static is active
 DEBUG: Merging existing variants '+no_single+no_static' into variants
 DEBUG: new fully merged portvariants: no_static + no_single +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Executing variant no_static provides no_static
 DEBUG: Executing variant no_single provides no_single
 DEBUG: No need to upgrade! boost 1.50.0_0 >= boost 1.50.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: icu 4.8.1_0 exists in the ports tree
 DEBUG: icu 4.8.1_0  is the latest installed
 DEBUG: icu 4.8.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: No need to upgrade! icu 4.8.1_0 >= icu 4.8.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gsl 1.15_2 exists in the ports tree
 DEBUG: gsl 1.15_2  is the latest installed
 DEBUG: gsl 1.15_2  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/gsl
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: No need to upgrade! gsl 1.15_2 >= gsl 1.15_2
 --->  Computing dependencies for lib2geom
 DEBUG: lib2geom has no conflicts
 DEBUG: Searching for dependency: gtkmm
 DEBUG: Found Dependency: receipt exists for gtkmm
 DEBUG: Searching for dependency: boost
 DEBUG: Found Dependency: receipt exists for boost
 DEBUG: Searching for dependency: gsl
 DEBUG: Found Dependency: receipt exists for gsl
 DEBUG: Executing org.macports.main (lib2geom)
 DEBUG: archivefetch phase started at Tue Sep 18 14:42:37 EDT 2012
 --->  Fetching archive for lib2geom
 DEBUG: Executing org.macports.archivefetch (lib2geom)
 --->  lib2geom-0.2.0_0.darwin_10.x86_64.tbz2 doesn't seem to exist in
 /opt/local/var/macports/incoming/verified
 --->  Attempting to fetch lib2geom-0.2.0_0.darwin_10.x86_64.tbz2 from
 http://packages.macports.org/lib2geom
   % Total    % Received % Xferd  Average Speed   Time    Time     Time
 Current
                                  Dload  Upload   Total   Spent    Left
 Speed
 100  433k  100  433k    0     0   261k      0  0:00:01  0:00:01 --:--:--
 278k
 --->  Attempting to fetch lib2geom-0.2.0_0.darwin_10.x86_64.tbz2.rmd160
 from http://packages.macports.org/lib2geom
   % Total    % Received % Xferd  Average Speed   Time    Time     Time
 Current
                                  Dload  Upload   Total   Spent    Left
 Speed
 102   512  102   512    0     0   2065      0 --:--:-- --:--:-- --:--:--
 4530
 DEBUG: Skipping completed org.macports.fetch (lib2geom)
 DEBUG: Skipping completed org.macports.checksum (lib2geom)
 DEBUG: Skipping completed org.macports.extract (lib2geom)
 DEBUG: Skipping completed org.macports.patch (lib2geom)
 DEBUG: Skipping completed org.macports.configure (lib2geom)
 DEBUG: Skipping completed org.macports.build (lib2geom)
 DEBUG: Skipping completed org.macports.destroot (lib2geom)
 DEBUG: install phase started at Tue Sep 18 14:42:39 EDT 2012
 --->  Installing lib2geom @0.2.0_0
 DEBUG: Executing org.macports.install (lib2geom)
 DEBUG: activate phase started at Tue Sep 18 14:42:39 EDT 2012
 DEBUG: Executing org.macports.activate (lib2geom)
 --->  Activating lib2geom @0.2.0_0
 DEBUG: Using /usr/bin/tar
 DEBUG: Using /usr/bin/bzip2
 ./
 ./+COMMENT
 ./+CONTENTS
 ./+DESC
 ./+PORTFILE
 ./+STATE
 ./opt/
 ./opt/local/
 ./opt/local/include/
 ./opt/local/lib/
 ./opt/local/lib/lib2geom.dylib
 ./opt/local/lib/pkgconfig/
 ./opt/local/lib/pkgconfig/2geom.pc
 ./opt/local/include/2geom/
 ./opt/local/include/2geom/2geom/
 ./opt/local/include/2geom/2geom/angle.h
 ./opt/local/include/2geom/2geom/arc-length.h
 ./opt/local/include/2geom/2geom/basic-intersection.h
 ./opt/local/include/2geom/2geom/bezier-curve.h
 ./opt/local/include/2geom/2geom/bezier-to-sbasis.h
 ./opt/local/include/2geom/2geom/bezier-utils.h
 ./opt/local/include/2geom/2geom/bezier.h
 ./opt/local/include/2geom/2geom/chebyshev.h
 ./opt/local/include/2geom/2geom/choose.h
 ./opt/local/include/2geom/2geom/circle.h
 ./opt/local/include/2geom/2geom/circulator.h
 ./opt/local/include/2geom/2geom/concepts.h
 ./opt/local/include/2geom/2geom/conjugate_gradient.h
 ./opt/local/include/2geom/2geom/convex-cover.h
 ./opt/local/include/2geom/2geom/coord.h
 ./opt/local/include/2geom/2geom/crossing.h
 ./opt/local/include/2geom/2geom/curve.h
 ./opt/local/include/2geom/2geom/curves.h
 ./opt/local/include/2geom/2geom/d2-sbasis.h
 ./opt/local/include/2geom/2geom/d2.h
 ./opt/local/include/2geom/2geom/ellipse.h
 ./opt/local/include/2geom/2geom/elliptical-arc.h
 ./opt/local/include/2geom/2geom/exception.h
 ./opt/local/include/2geom/2geom/forward.h
 ./opt/local/include/2geom/2geom/geom.h
 ./opt/local/include/2geom/2geom/hvlinesegment.h
 ./opt/local/include/2geom/2geom/interval.h
 ./opt/local/include/2geom/2geom/isnan.h
 ./opt/local/include/2geom/2geom/line.h
 ./opt/local/include/2geom/2geom/linear.h
 ./opt/local/include/2geom/2geom/matrix.h
 ./opt/local/include/2geom/2geom/nearest-point.h
 ./opt/local/include/2geom/2geom/ord.h
 ./opt/local/include/2geom/2geom/path-intersection.h
 ./opt/local/include/2geom/2geom/path.h
 ./opt/local/include/2geom/2geom/pathvector.h
 ./opt/local/include/2geom/2geom/piecewise.h
 ./opt/local/include/2geom/2geom/point-l.h
 ./opt/local/include/2geom/2geom/point-ops.h
 ./opt/local/include/2geom/2geom/point.h
 ./opt/local/include/2geom/2geom/poly.h
 ./opt/local/include/2geom/2geom/quadtree.h
 ./opt/local/include/2geom/2geom/ray.h
 ./opt/local/include/2geom/2geom/rect.h
 ./opt/local/include/2geom/2geom/region.h
 ./opt/local/include/2geom/2geom/sbasis-2d.h
 ./opt/local/include/2geom/2geom/sbasis-curve.h
 ./opt/local/include/2geom/2geom/sbasis-geometric.h
 ./opt/local/include/2geom/2geom/sbasis-math.h
 ./opt/local/include/2geom/2geom/sbasis-poly.h
 ./opt/local/include/2geom/2geom/sbasis-to-bezier.h
 ./opt/local/include/2geom/2geom/sbasis.h
 ./opt/local/include/2geom/2geom/shape.h
 ./opt/local/include/2geom/2geom/solver.h
 ./opt/local/include/2geom/2geom/svg-elliptical-arc.h
 ./opt/local/include/2geom/2geom/svg-path-parser.h
 ./opt/local/include/2geom/2geom/svg-path.h
 ./opt/local/include/2geom/2geom/sweep.h
 ./opt/local/include/2geom/2geom/transforms.h
 ./opt/local/include/2geom/2geom/utils.h
 DEBUG: activating directory: /
 DEBUG: activating directory: /opt
 DEBUG: activating directory: /opt/local
 DEBUG: activating directory: /opt/local/include
 DEBUG: activating directory: /opt/local/include/2geom
 DEBUG: activating directory: /opt/local/include/2geom/2geom
 DEBUG: activating file: /opt/local/include/2geom/2geom/angle.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/arc-length.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/basic-
 intersection.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/bezier-curve.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/bezier-to-sbasis.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/bezier-utils.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/bezier.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/chebyshev.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/choose.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/circle.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/circulator.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/concepts.h
 DEBUG: activating file:
 /opt/local/include/2geom/2geom/conjugate_gradient.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/convex-cover.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/coord.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/crossing.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/curve.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/curves.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/d2-sbasis.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/d2.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/ellipse.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/elliptical-arc.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/exception.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/forward.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/geom.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/hvlinesegment.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/interval.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/isnan.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/line.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/linear.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/matrix.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/nearest-point.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/ord.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/path-intersection.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/path.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/pathvector.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/piecewise.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/point-l.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/point-ops.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/point.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/poly.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/quadtree.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/ray.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/rect.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/region.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/sbasis-2d.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/sbasis-curve.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/sbasis-geometric.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/sbasis-math.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/sbasis-poly.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/sbasis-to-bezier.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/sbasis.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/shape.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/solver.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/svg-elliptical-
 arc.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/svg-path-parser.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/svg-path.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/sweep.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/transforms.h
 DEBUG: activating file: /opt/local/include/2geom/2geom/utils.h
 DEBUG: activating directory: /opt/local/lib
 DEBUG: activating file: /opt/local/lib/lib2geom.dylib
 DEBUG: activating directory: /opt/local/lib/pkgconfig
 DEBUG: activating file: /opt/local/lib/pkgconfig/2geom.pc
 DEBUG: Executing org.macports.main (lib2geom)
 DEBUG: clean phase started at Tue Sep 18 14:42:40 EDT 2012
 --->  Cleaning lib2geom
 DEBUG: Executing org.macports.clean (lib2geom)
 --->  Removing work directory for lib2geom
 DEBUG: Removing directory:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: delete:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: No work directory found to remove at
 /Users/zainabalmeraj/.macports/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: Removing symlink:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: delete:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: Removing directory:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: delete:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: Updating binary flag for file 1 of 62:
 /opt/local/include/2geom/2geom/angle.h
 DEBUG: Updating binary flag for file 2 of 62:
 /opt/local/include/2geom/2geom/arc-length.h
 DEBUG: Updating binary flag for file 3 of 62:
 /opt/local/include/2geom/2geom/basic-intersection.h
 DEBUG: Updating binary flag for file 4 of 62:
 /opt/local/include/2geom/2geom/bezier-curve.h
 DEBUG: Updating binary flag for file 5 of 62:
 /opt/local/include/2geom/2geom/bezier-to-sbasis.h
 DEBUG: Updating binary flag for file 6 of 62:
 /opt/local/include/2geom/2geom/bezier-utils.h
 DEBUG: Updating binary flag for file 7 of 62:
 /opt/local/include/2geom/2geom/bezier.h
 DEBUG: Updating binary flag for file 8 of 62:
 /opt/local/include/2geom/2geom/chebyshev.h
 DEBUG: Updating binary flag for file 9 of 62:
 /opt/local/include/2geom/2geom/choose.h
 DEBUG: Updating binary flag for file 10 of 62:
 /opt/local/include/2geom/2geom/circle.h
 DEBUG: Updating binary flag for file 11 of 62:
 /opt/local/include/2geom/2geom/circulator.h
 DEBUG: Updating binary flag for file 12 of 62:
 /opt/local/include/2geom/2geom/concepts.h
 DEBUG: Updating binary flag for file 13 of 62:
 /opt/local/include/2geom/2geom/conjugate_gradient.h
 DEBUG: Updating binary flag for file 14 of 62:
 /opt/local/include/2geom/2geom/convex-cover.h
 DEBUG: Updating binary flag for file 15 of 62:
 /opt/local/include/2geom/2geom/coord.h
 DEBUG: Updating binary flag for file 16 of 62:
 /opt/local/include/2geom/2geom/crossing.h
 DEBUG: Updating binary flag for file 17 of 62:
 /opt/local/include/2geom/2geom/curve.h
 DEBUG: Updating binary flag for file 18 of 62:
 /opt/local/include/2geom/2geom/curves.h
 DEBUG: Updating binary flag for file 19 of 62:
 /opt/local/include/2geom/2geom/d2-sbasis.h
 DEBUG: Updating binary flag for file 20 of 62:
 /opt/local/include/2geom/2geom/d2.h
 DEBUG: Updating binary flag for file 21 of 62:
 /opt/local/include/2geom/2geom/ellipse.h
 DEBUG: Updating binary flag for file 22 of 62:
 /opt/local/include/2geom/2geom/elliptical-arc.h
 DEBUG: Updating binary flag for file 23 of 62:
 /opt/local/include/2geom/2geom/exception.h
 DEBUG: Updating binary flag for file 24 of 62:
 /opt/local/include/2geom/2geom/forward.h
 DEBUG: Updating binary flag for file 25 of 62:
 /opt/local/include/2geom/2geom/geom.h
 DEBUG: Updating binary flag for file 26 of 62:
 /opt/local/include/2geom/2geom/hvlinesegment.h
 DEBUG: Updating binary flag for file 27 of 62:
 /opt/local/include/2geom/2geom/interval.h
 DEBUG: Updating binary flag for file 28 of 62:
 /opt/local/include/2geom/2geom/isnan.h
 DEBUG: Updating binary flag for file 29 of 62:
 /opt/local/include/2geom/2geom/line.h
 DEBUG: Updating binary flag for file 30 of 62:
 /opt/local/include/2geom/2geom/linear.h
 DEBUG: Updating binary flag for file 31 of 62:
 /opt/local/include/2geom/2geom/matrix.h
 DEBUG: Updating binary flag for file 32 of 62:
 /opt/local/include/2geom/2geom/nearest-point.h
 DEBUG: Updating binary flag for file 33 of 62:
 /opt/local/include/2geom/2geom/ord.h
 DEBUG: Updating binary flag for file 34 of 62:
 /opt/local/include/2geom/2geom/path-intersection.h
 DEBUG: Updating binary flag for file 35 of 62:
 /opt/local/include/2geom/2geom/path.h
 DEBUG: Updating binary flag for file 36 of 62:
 /opt/local/include/2geom/2geom/pathvector.h
 DEBUG: Updating binary flag for file 37 of 62:
 /opt/local/include/2geom/2geom/piecewise.h
 DEBUG: Updating binary flag for file 38 of 62:
 /opt/local/include/2geom/2geom/point-l.h
 DEBUG: Updating binary flag for file 39 of 62:
 /opt/local/include/2geom/2geom/point-ops.h
 DEBUG: Updating binary flag for file 40 of 62:
 /opt/local/include/2geom/2geom/point.h
 DEBUG: Updating binary flag for file 41 of 62:
 /opt/local/include/2geom/2geom/poly.h
 DEBUG: Updating binary flag for file 42 of 62:
 /opt/local/include/2geom/2geom/quadtree.h
 DEBUG: Updating binary flag for file 43 of 62:
 /opt/local/include/2geom/2geom/ray.h
 DEBUG: Updating binary flag for file 44 of 62:
 /opt/local/include/2geom/2geom/rect.h
 DEBUG: Updating binary flag for file 45 of 62:
 /opt/local/include/2geom/2geom/region.h
 DEBUG: Updating binary flag for file 46 of 62:
 /opt/local/include/2geom/2geom/sbasis-2d.h
 DEBUG: Updating binary flag for file 47 of 62:
 /opt/local/include/2geom/2geom/sbasis-curve.h
 DEBUG: Updating binary flag for file 48 of 62:
 /opt/local/include/2geom/2geom/sbasis-geometric.h
 DEBUG: Updating binary flag for file 49 of 62:
 /opt/local/include/2geom/2geom/sbasis-math.h
 DEBUG: Updating binary flag for file 50 of 62:
 /opt/local/include/2geom/2geom/sbasis-poly.h
 DEBUG: Updating binary flag for file 51 of 62:
 /opt/local/include/2geom/2geom/sbasis-to-bezier.h
 DEBUG: Updating binary flag for file 52 of 62:
 /opt/local/include/2geom/2geom/sbasis.h
 DEBUG: Updating binary flag for file 53 of 62:
 /opt/local/include/2geom/2geom/shape.h
 DEBUG: Updating binary flag for file 54 of 62:
 /opt/local/include/2geom/2geom/solver.h
 DEBUG: Updating binary flag for file 55 of 62:
 /opt/local/include/2geom/2geom/svg-elliptical-arc.h
 DEBUG: Updating binary flag for file 56 of 62:
 /opt/local/include/2geom/2geom/svg-path-parser.h
 DEBUG: Updating binary flag for file 57 of 62:
 /opt/local/include/2geom/2geom/svg-path.h
 DEBUG: Updating binary flag for file 58 of 62:
 /opt/local/include/2geom/2geom/sweep.h
 DEBUG: Updating binary flag for file 59 of 62:
 /opt/local/include/2geom/2geom/transforms.h
 DEBUG: Updating binary flag for file 60 of 62:
 /opt/local/include/2geom/2geom/utils.h
 DEBUG: Updating binary flag for file 61 of 62:
 /opt/local/lib/lib2geom.dylib
 DEBUG: Updating binary flag for file 62 of 62:
 /opt/local/lib/pkgconfig/2geom.pc
 --->  Updating database of binaries
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/bugpoint
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llc
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/lli
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-ar
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-as
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-bcanalyzer
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-cov
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-diff
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-dis
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-dwarfdump
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-extract
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-ld
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-link
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-mc
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-nm
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-objdump
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-prof
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-ranlib
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-readobj
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-rtdyld
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-size
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-stress
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-stub
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/macho-dump
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/opt
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/ld64/ld
 DEBUG: Missing architecture arm in file /usr/lib/libSystem.B.dylib
 DEBUG: Missing architecture arm in file outside prefix referenced from
 /opt/local/lib/apple-gcc42/gcc/i686-apple-darwin10/4.2.1/libstdc++.dylib
 DEBUG: Missing architecture arm in file /usr/lib/libSystem.B.dylib
 DEBUG: Missing architecture arm in file outside prefix referenced from
 /opt/local/lib/apple-gcc42/gcc/powerpc-apple-
 darwin10/4.2.1/libstdc++.dylib
 --->  Scanning binaries for linking errors
 Could not open /opt/local/lib/libpng14.14.dylib: Error opening or reading
 file (referenced from /opt/local/lib/lib2geom.dylib)
 DEBUG: Marking /opt/local/lib/lib2geom.dylib as broken

 --->  Found 1 broken file(s), matching files to ports
 --->  Found 1 broken port(s), determining rebuild order
 DEBUG: Broken: lib2geom
 DEBUG: Processing port lib2geom @0:0.2.0_0
 --->  Rebuilding in order
      lib2geom @0.2.0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: lib2geom 0.2.0_0 exists in the ports tree
 DEBUG: lib2geom 0.2.0_0  is the latest installed
 DEBUG: lib2geom 0.2.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: rev-upgrade override ... upgrading!
 DEBUG: Not following dependencies
 DEBUG: Attempting ln -sf
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: Starting logging for lib2geom
 --->  Computing dependencies for lib2geom
 DEBUG: lib2geom has no conflicts
 DEBUG: Searching for dependency: gtkmm
 DEBUG: Found Dependency: receipt exists for gtkmm
 DEBUG: Searching for dependency: boost
 DEBUG: Found Dependency: receipt exists for boost
 DEBUG: Searching for dependency: gsl
 DEBUG: Found Dependency: receipt exists for gsl
 DEBUG: Skipping activate (lib2geom @0.2.0_0) since this port is already
 active
 DEBUG: Executing org.macports.main (lib2geom)
 DEBUG: clean phase started at Tue Sep 18 14:42:45 EDT 2012
 --->  Cleaning lib2geom
 DEBUG: Executing org.macports.clean (lib2geom)
 --->  Removing work directory for lib2geom
 DEBUG: Removing directory:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: delete:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: No work directory found to remove at
 /Users/zainabalmeraj/.macports/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: Removing symlink:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: delete:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: Removing directory:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: delete:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: Rebuilding port lib2geom finished with status 0
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/bugpoint
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llc
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/lli
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-ar
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-as
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-bcanalyzer
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-cov
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-diff
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-dis
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-dwarfdump
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-extract
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-ld
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-link
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-mc
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-nm
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-objdump
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-prof
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-ranlib
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-readobj
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-rtdyld
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-size
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-stress
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-stub
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/macho-dump
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/opt
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/ld64/ld
 DEBUG: Missing architecture arm in file /usr/lib/libSystem.B.dylib
 DEBUG: Missing architecture arm in file outside prefix referenced from
 /opt/local/lib/apple-gcc42/gcc/i686-apple-darwin10/4.2.1/libstdc++.dylib
 DEBUG: Missing architecture arm in file /usr/lib/libSystem.B.dylib
 DEBUG: Missing architecture arm in file outside prefix referenced from
 /opt/local/lib/apple-gcc42/gcc/powerpc-apple-
 darwin10/4.2.1/libstdc++.dylib
 --->  Scanning binaries for linking errors
 Could not open /opt/local/lib/libpng14.14.dylib: Error opening or reading
 file (referenced from /opt/local/lib/lib2geom.dylib)
 DEBUG: Marking /opt/local/lib/lib2geom.dylib as broken

 --->  Found 1 broken file(s), matching files to ports
 --->  Found 1 broken port(s), determining rebuild order
 DEBUG: Broken: lib2geom
 DEBUG: Processing port lib2geom @0:0.2.0_0
 --->  Rebuilding in order
      lib2geom @0.2.0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: lib2geom 0.2.0_0 exists in the ports tree
 DEBUG: lib2geom 0.2.0_0  is the latest installed
 DEBUG: lib2geom 0.2.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: rev-upgrade override ... upgrading (from source)!
 DEBUG: Not following dependencies
 DEBUG: Attempting ln -sf
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: Starting logging for lib2geom
 --->  Computing dependencies for lib2geom
 DEBUG: lib2geom has no conflicts
 DEBUG: Searching for dependency: gtkmm
 DEBUG: Found Dependency: receipt exists for gtkmm
 DEBUG: Searching for dependency: boost
 DEBUG: Found Dependency: receipt exists for boost
 DEBUG: Searching for dependency: gsl
 DEBUG: Found Dependency: receipt exists for gsl
 DEBUG: Skipping install (lib2geom) since this port is already installed
 DEBUG: Executing org.macports.main (lib2geom)
 DEBUG: clean phase started at Tue Sep 18 14:42:46 EDT 2012
 --->  Cleaning lib2geom
 DEBUG: Executing org.macports.clean (lib2geom)
 --->  Removing work directory for lib2geom
 DEBUG: Removing directory:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: delete:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: No work directory found to remove at
 /Users/zainabalmeraj/.macports/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: Removing symlink:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: delete:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: Removing directory:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: delete:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom
 DEBUG: Uninstalling lib2geom 0.2.0_0
 DEBUG: Changing to port directory:
 /opt/local/var/macports/registry/portfiles/lib2geom/0.2.0_0
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Starting logging for lib2geom
 DEBUG: Executing org.macports.main (lib2geom)
 DEBUG: uninstall phase started at Tue Sep 18 14:42:46 EDT 2012
 DEBUG: Executing org.macports.uninstall (lib2geom)
 DEBUG: Changing to port directory:
 /opt/local/var/macports/registry/portfiles/lib2geom/0.2.0_0
 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Starting logging for lib2geom
 DEBUG: Executing org.macports.main (lib2geom)
 DEBUG: deactivate phase started at Tue Sep 18 14:42:46 EDT 2012
 DEBUG: Executing org.macports.deactivate (lib2geom)
 --->  Deactivating lib2geom @0.2.0_0
 DEBUG: deactivating file: /opt/local/lib/pkgconfig/2geom.pc
 DEBUG: /opt/local/lib/pkgconfig is not empty
 DEBUG: deactivating file: /opt/local/lib/lib2geom.dylib
 DEBUG: /opt/local/lib is not empty
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/utils.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/transforms.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/sweep.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/svg-path.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/svg-path-parser.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/svg-elliptical-
 arc.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/solver.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/shape.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/sbasis.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/sbasis-to-
 bezier.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/sbasis-poly.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/sbasis-math.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/sbasis-
 geometric.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/sbasis-curve.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/sbasis-2d.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/region.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/rect.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/ray.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/quadtree.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/poly.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/point.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/point-ops.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/point-l.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/piecewise.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/pathvector.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/path.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/path-
 intersection.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/ord.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/nearest-point.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/matrix.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/linear.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/line.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/isnan.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/interval.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/hvlinesegment.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/geom.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/forward.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/exception.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/elliptical-arc.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/ellipse.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/d2.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/d2-sbasis.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/curves.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/curve.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/crossing.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/coord.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/convex-cover.h
 DEBUG: deactivating file:
 /opt/local/include/2geom/2geom/conjugate_gradient.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/concepts.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/circulator.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/circle.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/choose.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/chebyshev.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/bezier.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/bezier-utils.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/bezier-to-
 sbasis.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/bezier-curve.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/basic-
 intersection.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/arc-length.h
 DEBUG: deactivating file: /opt/local/include/2geom/2geom/angle.h
 DEBUG: deactivating directory: /opt/local/include/2geom/2geom
 DEBUG: /opt/local/include/2geom is not empty
 DEBUG: /opt/local/include is not empty
 DEBUG: /opt/local is not empty
 DEBUG: /opt is not empty
 DEBUG: / is not empty
 DEBUG: Executing org.macports.main (lib2geom)
 DEBUG: clean phase started at Tue Sep 18 14:42:46 EDT 2012
 --->  Cleaning lib2geom
 DEBUG: Executing org.macports.clean (lib2geom)
 --->  Removing work directory for lib2geom
 DEBUG: No work directory found to remove at
 /opt/local/var/macports/build/_opt_local_var_macports_registry_portfiles_lib2geom_0.2.0_0/lib2geom
 DEBUG: No work directory found to remove at
 /Users/zainabalmeraj/.macports/opt/local/var/macports/build/_opt_local_var_macports_registry_portfiles_lib2geom_0.2.0_0/lib2geom
 DEBUG: Removing directory:
 /opt/local/var/macports/logs/_opt_local_var_macports_registry_portfiles_lib2geom_0.2.0_0/lib2geom
 DEBUG: delete:
 /opt/local/var/macports/logs/_opt_local_var_macports_registry_portfiles_lib2geom_0.2.0_0/lib2geom
 --->  Uninstalling lib2geom @0.2.0_0
 DEBUG: Executing org.macports.main (lib2geom)
 DEBUG: clean phase started at Tue Sep 18 14:42:46 EDT 2012
 --->  Cleaning lib2geom
 DEBUG: Executing org.macports.clean (lib2geom)
 --->  Removing work directory for lib2geom
 DEBUG: No work directory found to remove at
 /opt/local/var/macports/build/_opt_local_var_macports_registry_portfiles_lib2geom_0.2.0_0/lib2geom
 DEBUG: No work directory found to remove at
 /Users/zainabalmeraj/.macports/opt/local/var/macports/build/_opt_local_var_macports_registry_portfiles_lib2geom_0.2.0_0/lib2geom
 DEBUG: No log directory found to remove at
 /opt/local/var/macports/logs/_opt_local_var_macports_registry_portfiles_lib2geom_0.2.0_0
 DEBUG: Attempting ln -sf
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/work
 DEBUG: Starting logging for lib2geom
 --->  Computing dependencies for lib2geom
 DEBUG: lib2geom has no conflicts
 DEBUG: Searching for dependency: cmake
 DEBUG: Found Dependency: receipt exists for cmake
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: gtkmm
 DEBUG: Found Dependency: receipt exists for gtkmm
 DEBUG: Searching for dependency: boost
 DEBUG: Found Dependency: receipt exists for boost
 DEBUG: Searching for dependency: gsl
 DEBUG: Found Dependency: receipt exists for gsl
 DEBUG: Executing org.macports.main (lib2geom)
 DEBUG: archivefetch phase started at Tue Sep 18 14:42:46 EDT 2012
 DEBUG: Executing org.macports.archivefetch (lib2geom)
 DEBUG: fetch phase started at Tue Sep 18 14:42:46 EDT 2012
 --->  Fetching distfiles for lib2geom
 DEBUG: Executing org.macports.fetch (lib2geom)
 DEBUG: checksum phase started at Tue Sep 18 14:42:46 EDT 2012
 --->  Verifying checksum(s) for lib2geom
 DEBUG: Executing org.macports.checksum (lib2geom)
 --->  Checksumming lib2geom-0.2.0.tar.gz
 DEBUG: Correct (md5) checksum for lib2geom-0.2.0.tar.gz
 DEBUG: Correct (sha1) checksum for lib2geom-0.2.0.tar.gz
 DEBUG: Correct (rmd160) checksum for lib2geom-0.2.0.tar.gz
 DEBUG: extract phase started at Tue Sep 18 14:42:46 EDT 2012
 --->  Extracting lib2geom
 DEBUG: Executing org.macports.extract (lib2geom)
 --->  Extracting lib2geom-0.2.0.tar.gz
 DEBUG: setting option extract.args to
 '/opt/local/var/macports/distfiles/lib2geom/lib2geom-0.2.0.tar.gz'
 DEBUG: Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work"
 && /usr/bin/gzip -dc
 '/opt/local/var/macports/distfiles/lib2geom/lib2geom-0.2.0.tar.gz' |
 /usr/bin/gnutar --no-same-owner -xf -'
 DEBUG: Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work"
 && /usr/bin/gzip -dc
 '/opt/local/var/macports/distfiles/lib2geom/lib2geom-0.2.0.tar.gz' |
 /usr/bin/gnutar --no-same-owner -xf -
 DEBUG: patch phase started at Tue Sep 18 14:42:47 EDT 2012
 DEBUG: Executing org.macports.patch (lib2geom)
 --->  Applying patches to lib2geom
 --->  Applying patch-src-2geom-CMakeLists.txt.diff
 DEBUG: Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0"
 && /usr/bin/patch -p0'
 DEBUG: Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0"
 && /usr/bin/patch -p0 <
 '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/files
 /patch-src-2geom-CMakeLists.txt.diff'
 patching file src/2geom/CMakeLists.txt
 --->  Applying patch-src-2geom-toys-CMakeLists.txt.diff
 DEBUG: Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0"
 && /usr/bin/patch -p0'
 DEBUG: Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0"
 && /usr/bin/patch -p0 <
 '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lib2geom/files
 /patch-src-2geom-toys-CMakeLists.txt.diff'
 patching file src/2geom/toys/CMakeLists.txt
 DEBUG: configure phase started at Tue Sep 18 14:42:47 EDT 2012
 --->  Configuring lib2geom
 DEBUG: Using compiler 'Mac OS X gcc 4.2'
 DEBUG: Executing org.macports.configure (lib2geom)
 DEBUG: Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch x86_64'
 CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64'
 LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
 CXX='/usr/bin/g++-4.2'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/.CC_PRINT_OPTIONS'
 F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64'
 OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c'
 OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC_PRINT_OPTIONS='YES'
 CC='/usr/bin/gcc-4.2'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0"
 && cmake --prefix=/opt/local -Wno-dev -DCMAKE_INSTALL_PREFIX=/opt/local
 -D2GEOM_BUILD_SHARED=YES
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0'
 DEBUG: Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0"
 && cmake --prefix=/opt/local -Wno-dev -DCMAKE_INSTALL_PREFIX=/opt/local
 -D2GEOM_BUILD_SHARED=YES
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0
 -- The CXX compiler identification is GNU 4.2.1
 -- Checking whether CXX compiler has -isysroot
 -- Checking whether CXX compiler has -isysroot - yes
 -- Checking whether CXX compiler supports OSX deployment target flag
 -- Checking whether CXX compiler supports OSX deployment target flag - yes
 -- Check for working CXX compiler: /usr/bin/g++-4.2
 -- Check for working CXX compiler: /usr/bin/g++-4.2 -- works
 -- Detecting CXX compiler ABI info
 -- Detecting CXX compiler ABI info - done
 -- gtk+-2.0 Includes, Compile and Link Flags: FOUND
 -- gtkmm-2.4 Includes, Compile and Link Flags: FOUND
 -- cairomm-1.0 Includes, Compile and Link Flags: FOUND
 -- cairo Includes, Compile and Link Flags: FOUND
 -- gsl Includes, Compile and Link Flags: FOUND
 -- blas Includes, Compile and Link Flags: NOT FOUND
 -- boost: FOUND  ( /opt/local/include )
 -- Configuring done
 -- Generating done
 -- Build files have been written to:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0
 DEBUG: build phase started at Tue Sep 18 14:42:53 EDT 2012
 --->  Building lib2geom
 DEBUG: Executing org.macports.build (lib2geom)
 DEBUG: Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0"
 && /usr/bin/make -j2 -w all'
 DEBUG: Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0"
 && /usr/bin/make -j2 -w all
 make: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0'
 make[1]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0'
 make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0'
 Scanning dependencies of target 2geom
 make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0'
 make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0'
 [  2%] [  5%] Building CXX object src/2geom/CMakeFiles/2geom.dir/svg-path-
 parser.o
 Building CXX object src/2geom/CMakeFiles/2geom.dir/svg-path.o
 [  7%] Building CXX object src/2geom/CMakeFiles/2geom.dir/nearest-point.o
 [ 10%] Building CXX object src/2geom/CMakeFiles/2geom.dir/bezier-
 clipping.o
 [ 12%] Building CXX object src/2geom/CMakeFiles/2geom.dir/circle.o
 [ 15%] Building CXX object src/2geom/CMakeFiles/2geom.dir/curve-helpers.o
 [ 17%] Building CXX object src/2geom/CMakeFiles/2geom.dir/ellipse.o
 [ 20%] Building CXX object src/2geom/CMakeFiles/2geom.dir/elliptical-arc.o
 [ 22%] Building CXX object src/2geom/CMakeFiles/2geom.dir/line.o
 [ 25%] Building CXX object src/2geom/CMakeFiles/2geom.dir/path.o
 [ 27%] Building CXX object src/2geom/CMakeFiles/2geom.dir/path-
 intersection.o
 [ 30%] Building CXX object src/2geom/CMakeFiles/2geom.dir/pathvector.o
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /path-intersection.cpp:185: warning: ‘double Geom::EpsilonOf(double)’
 defined but not used
 [ 32%] [ 35%] Building CXX object src/2geom/CMakeFiles/2geom.dir/shape.o
 Building CXX object src/2geom/CMakeFiles/2geom.dir/region.o
 [ 37%] Building CXX object src/2geom/CMakeFiles/2geom.dir/crossing.o
 [ 40%] Building CXX object src/2geom/CMakeFiles/2geom.dir/sweep.o
 [ 42%] Building CXX object src/2geom/CMakeFiles/2geom.dir/poly.o
 [ 45%] Building CXX object src/2geom/CMakeFiles/2geom.dir/quadtree.o
 [ 47%] Building CXX object src/2geom/CMakeFiles/2geom.dir/matrix.o
 [ 50%] Building CXX object src/2geom/CMakeFiles/2geom.dir/transforms.o
 [ 52%] Building CXX object src/2geom/CMakeFiles/2geom.dir/point.o
 [ 55%] Building CXX object src/2geom/CMakeFiles/2geom.dir/d2-sbasis.o
 [ 57%] Building CXX object src/2geom/CMakeFiles/2geom.dir/piecewise.o
 [ 60%] Building CXX object src/2geom/CMakeFiles/2geom.dir/sbasis.o
 [ 62%] Building CXX object src/2geom/CMakeFiles/2geom.dir/sbasis-2d.o
 [ 65%] Building CXX object src/2geom/CMakeFiles/2geom.dir/sbasis-
 geometric.o
 [ 67%] Building CXX object src/2geom/CMakeFiles/2geom.dir/sbasis-math.o
 [ 70%] Building CXX object src/2geom/CMakeFiles/2geom.dir/sbasis-poly.o
 [ 72%] Building CXX object src/2geom/CMakeFiles/2geom.dir/sbasis-roots.o
 [ 75%] Building CXX object src/2geom/CMakeFiles/2geom.dir/sbasis-to-
 bezier.o
 [ 77%] Building CXX object src/2geom/CMakeFiles/2geom.dir/basic-
 intersection.o
 [ 80%] Building CXX object src/2geom/CMakeFiles/2geom.dir/geom.o
 [ 82%] Building CXX object src/2geom/CMakeFiles/2geom.dir/utils.o
 [ 85%] Building CXX object src/2geom/CMakeFiles/2geom.dir/bezier-utils.o
 [ 87%] Building CXX object
 src/2geom/CMakeFiles/2geom.dir/conjugate_gradient.o
 [ 90%] Building CXX object src/2geom/CMakeFiles/2geom.dir/convex-cover.o
 [ 92%] Building CXX object src/2geom/CMakeFiles/2geom.dir/solve-bezier-
 one-d.o
 [ 95%] Building CXX object src/2geom/CMakeFiles/2geom.dir/solve-bezier-
 parametric.o
 [ 97%] Building CXX object src/2geom/CMakeFiles/2geom.dir/svg-elliptical-
 arc.o
 [100%] Building CXX object src/2geom/CMakeFiles/2geom.dir/numeric/matrix.o
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /svg-elliptical-arc.cpp: In constructor
 ‘Geom::make_elliptical_arc::make_elliptical_arc(Geom::SVGEllipticalArc&,
 const Geom::D2<Geom::SBasis>&, unsigned int, double)’:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /svg-elliptical-arc.cpp:1024: error: class ‘Geom::make_elliptical_arc’
 does not have any field named ‘model’
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /svg-elliptical-arc.cpp:1024: error: class ‘Geom::make_elliptical_arc’
 does not have any field named ‘fitter’
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /svg-elliptical-arc.cpp:1024: error: ‘model’ was not declared in this
 scope
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /svg-elliptical-arc.cpp: In member function ‘void
 Geom::make_elliptical_arc::fit()’:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /svg-elliptical-arc.cpp:1111: error: ‘fitter’ was not declared in this
 scope
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /svg-elliptical-arc.cpp:1113: error: ‘fitter’ was not declared in this
 scope
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /svg-elliptical-arc.cpp: In member function ‘bool
 Geom::make_elliptical_arc::make_elliptiarc()’:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0/src/2geom
 /svg-elliptical-arc.cpp:1121: error: ‘fitter’ was not declared in this
 scope
 make[2]: *** [src/2geom/CMakeFiles/2geom.dir/svg-elliptical-arc.o] Error 1
 make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0'
 make[1]: *** [src/2geom/CMakeFiles/2geom.dir/all] Error 2
 make[1]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0'
 make: *** [all] Error 2
 make: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0'
 Command failed:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/work/lib2geom-0.2.0"
 && /usr/bin/make -j2 -w all
 Exit code: 2
 Error: org.macports.build for port lib2geom returned: command execution
 failed
 DEBUG: Error code: CHILDSTATUS 25984 2
 DEBUG: Backtrace: command execution failed
     while executing
 "system -nice 0 $fullcmdstring"
     ("eval" body line 1)
     invoked from within
 "eval system $notty $nice \$fullcmdstring"
     invoked from within
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 Warning: targets not executed for lib2geom: org.macports.activate
 org.macports.build org.macports.destroot org.macports.install
 Please see the log file for port lib2geom for details:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_lib2geom/lib2geom/main.log
 DEBUG: Rebuilding port lib2geom finished with status 0
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/bugpoint
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llc
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/lli
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-ar
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-as
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-bcanalyzer
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-cov
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-diff
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-dis
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-dwarfdump
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-extract
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-ld
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-link
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-mc
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-nm
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-objdump
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-prof
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-ranlib
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-readobj
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-rtdyld
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-size
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-stress
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/llvm-stub
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/macho-dump
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/llvm-3.1/bin/opt
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/ld64/ld
 DEBUG: Missing architecture arm in file /usr/lib/libSystem.B.dylib
 DEBUG: Missing architecture arm in file outside prefix referenced from
 /opt/local/lib/apple-gcc42/gcc/i686-apple-darwin10/4.2.1/libstdc++.dylib
 DEBUG: Missing architecture arm in file /usr/lib/libSystem.B.dylib
 DEBUG: Missing architecture arm in file outside prefix referenced from
 /opt/local/lib/apple-gcc42/gcc/powerpc-apple-
 darwin10/4.2.1/libstdc++.dylib
 --->  Scanning binaries for linking errors
 --->  No broken files found.

 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/36206#comment:4>
MacPorts <http://www.macports.org/>
Ports system for Mac OS