[MacPorts] #38714: pkg-config requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 (was: 'upgrade outdated' fails configuring poppler)
MacPorts
noreply at macports.org
Mon Apr 8 06:44:05 PDT 2013
#38714: pkg-config requires version 8.0.0 or later, but libiconv.2.dylib provides
version 7.0.0
----------------------+--------------------------------
Reporter: skarl@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.1.3
Resolution: | Keywords:
Port: |
----------------------+--------------------------------
Changes (by ryandesign@…):
* cc: skarl@… (removed)
* cc: ryandesign@… (added)
* port: poppler =>
Old description:
> Hi,
>
> I noticed that several port utilities do not work properly anymore (e.g.
> latex from texlive, xdvi, dvips, dvipdf, etc.).
> Therefore, after a successful 'selfupdate', I tried 'sudo port upgrade
> outdated'. However, this failed when configuring 'poppler' for the
> upgrade.
>
> Saying:
>
> ---> Computing dependencies for poppler
> ---> Fetching archive for poppler
> ---> Attempting to fetch poppler-0.22.2_0.darwin_11.x86_64.tbz2 from
> http://mse.uk.packages.macports.org/sites/packages.macports.org/poppler
> ---> Attempting to fetch poppler-0.22.2_0.darwin_11.x86_64.tbz2 from
> http://lil.fr.packages.macports.org/poppler
> ---> Attempting to fetch poppler-0.22.2_0.darwin_11.x86_64.tbz2 from
> http://packages.macports.org/poppler
> ---> Fetching distfiles for poppler
> ---> Verifying checksum(s) for poppler
> ---> Extracting poppler
> ---> Configuring poppler
> Error: org.macports.configure for port poppler returned: configure
> failure: command execution failed
> Please see the log file for port poppler for details:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log
> Error: Unable to upgrade port: 1
> To report a bug, follow the instructions in the guide:
> http://guide.macports.org/#project.tickets
>
> The interesting bits from
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log
> read:
>
> :info:configure checking for pkg-config... /opt/local/bin/pkg-config
> :info:configure checking pkg-config is at least version 0.9.0... dyld:
> Library not loaded: /opt/local/lib/libiconv.2.dylib
> :info:configure Referenced from: /opt/local/bin/pkg-config
> :info:configure Reason: Incompatible library version: pkg-config
> requires version 8.0.0 or later, but libiconv.2.dylib provides version
> 7.0.0
> :info:configure ./configure: line 17618: 46097 Trace/BPT trap: 5
> $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version
> :info:configure no
>
> and at the end:
> :info:configure checking for LIBCURL... no
> :info:configure configure: error: in
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.22.2':
> :info:configure configure: error: The pkg-config script could not be
> found or is too old. Make sure it
> :info:configure is in your PATH or set the PKG_CONFIG environment
> variable to the full
> :info:configure path to pkg-config.
> :info:configure
> :info:configure Alternatively, you may set the environment variables
> LIBCURL_CFLAGS
> :info:configure and LIBCURL_LIBS to avoid the need to call pkg-config.
> :info:configure See the pkg-config man page for more details.
> :info:configure
> :info:configure To get pkg-config, see <http://pkg-
> config.freedesktop.org/>.
> :info:configure See `config.log' for more details
> :info:configure Command failed: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.22.2"
> && ./configure --prefix=/opt/local --disable-introspection --disable-
> poppler-qt4 --disable-gtk-test --disable-silent-rules --enable-xpdf-
> headers --enable-zlib --enable-libcurl --enable-poppler-glib
> --mandir=/opt/local/share/man --x-includes=/opt/local/include
> --x-libraries=/opt/local/lib
> :info:configure Exit code: 1
> :error:configure org.macports.configure for port poppler returned:
> configure failure: command execution failed
> :debug:configure Error code: NONE
> :debug:configure Backtrace: configure failure: command execution failed
> while executing
> "$procedure $targetname"
> :info:configure Warning: targets not executed for poppler:
> org.macports.install org.macports.configure org.macports.build
> org.macports.destroot
> :notice:configure Please see the log file for port poppler for details:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log
>
> What can I do there? I was short to re-install macports as a whole :)
>
> Thanks and best wishes, Simon
New description:
Hi,
I noticed that several port utilities do not work properly anymore (e.g.
latex from texlive, xdvi, dvips, dvipdf, etc.).
Therefore, after a successful 'selfupdate', I tried 'sudo port upgrade
outdated'. However, this failed when configuring 'poppler' for the
upgrade.
Saying:
{{{
---> Computing dependencies for poppler
---> Fetching archive for poppler
---> Attempting to fetch poppler-0.22.2_0.darwin_11.x86_64.tbz2 from
http://mse.uk.packages.macports.org/sites/packages.macports.org/poppler
---> Attempting to fetch poppler-0.22.2_0.darwin_11.x86_64.tbz2 from
http://lil.fr.packages.macports.org/poppler
---> Attempting to fetch poppler-0.22.2_0.darwin_11.x86_64.tbz2 from
http://packages.macports.org/poppler
---> Fetching distfiles for poppler
---> Verifying checksum(s) for poppler
---> Extracting poppler
---> Configuring poppler
Error: org.macports.configure for port poppler returned: configure
failure: command execution failed
Please see the log file for port poppler for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log
Error: Unable to upgrade port: 1
To report a bug, follow the instructions in the guide:
http://guide.macports.org/#project.tickets
}}}
The interesting bits from
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log
read:
{{{
:info:configure checking for pkg-config... /opt/local/bin/pkg-config
:info:configure checking pkg-config is at least version 0.9.0... dyld:
Library not loaded: /opt/local/lib/libiconv.2.dylib
:info:configure Referenced from: /opt/local/bin/pkg-config
:info:configure Reason: Incompatible library version: pkg-config
requires version 8.0.0 or later, but libiconv.2.dylib provides version
7.0.0
:info:configure ./configure: line 17618: 46097 Trace/BPT trap: 5
$PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version
:info:configure no
}}}
and at the end:
{{{
:info:configure checking for LIBCURL... no
:info:configure configure: error: in
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.22.2':
:info:configure configure: error: The pkg-config script could not be found
or is too old. Make sure it
:info:configure is in your PATH or set the PKG_CONFIG environment variable
to the full
:info:configure path to pkg-config.
:info:configure
:info:configure Alternatively, you may set the environment variables
LIBCURL_CFLAGS
:info:configure and LIBCURL_LIBS to avoid the need to call pkg-config.
:info:configure See the pkg-config man page for more details.
:info:configure
:info:configure To get pkg-config, see <http://pkg-
config.freedesktop.org/>.
:info:configure See `config.log' for more details
:info:configure Command failed: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.22.2"
&& ./configure --prefix=/opt/local --disable-introspection --disable-
poppler-qt4 --disable-gtk-test --disable-silent-rules --enable-xpdf-
headers --enable-zlib --enable-libcurl --enable-poppler-glib
--mandir=/opt/local/share/man --x-includes=/opt/local/include
--x-libraries=/opt/local/lib
:info:configure Exit code: 1
:error:configure org.macports.configure for port poppler returned:
configure failure: command execution failed
:debug:configure Error code: NONE
:debug:configure Backtrace: configure failure: command execution failed
while executing
"$procedure $targetname"
:info:configure Warning: targets not executed for poppler:
org.macports.install org.macports.configure org.macports.build
org.macports.destroot
:notice:configure Please see the log file for port poppler for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log
}}}
What can I do there? I was short to re-install macports as a whole :)
Thanks and best wishes, Simon
--
--
Ticket URL: <https://trac.macports.org/ticket/38714#comment:2>
MacPorts <http://www.macports.org/>
Ports system for OS X
More information about the macports-tickets
mailing list