[MacPorts] #40244: qemu @1.6.0+target_i386+target_m68k+target_mips+target_ppc+target_sparc+target_x86_64 - qemu-system-sparc broken - compiler issue?

[MacPorts]

#40244: qemu
@1.6.0+target_i386+target_m68k+target_mips+target_ppc+target_sparc+target_x86_64
- qemu-system-sparc broken - compiler issue?
----------------------+----------------------
  Reporter:  peter@…  |      Owner:  raimue@…
      Type:  defect   |     Status:  new
  Priority:  Normal   |  Milestone:
 Component:  ports    |    Version:  2.2.0
Resolution:           |   Keywords:
      Port:  qemu     |
----------------------+----------------------
Changes (by larryv@…):

 * owner:  macports-tickets@… => raimue@…
 * port:  qemu-1.6.0 => qemu


Old description:

> When I use the qemu-system-sparc built by MacPorts, it freezes during the
> emulated machine's startup process.  When I build it using gcc-apple-4.2,
> I have no such problem.
>
> Note:
>
> --- cut here ---
>
> Power-ON Reset
>

> MB86907 POST 2.2.3 03SEP96
>
> Probing system memory: 32 32 32 32 32 32 32 32
> Config = 8800AAAA
> 0Kb ecache detected
>
> initializing TLB
> initializing cache
>
> Allocating SRMMU Context Table
> Setting SRMMU Context Register
> Setting SRMMU Context Table Pointer Register
> Allocating SRMMU Level 1 Table
> Mapping RAM
> Mapping ROM
>
> ttya initialized
> Probing Memory Bank #0 32 Megabytes
> Probing Memory Bank #1 32 Megabytes
> Probing Memory Bank #2 32 Megabytes
> Probing Memory Bank #3 32 Megabytes
> Probing Memory Bank #4 32 Megabytes
> Probing Memory Bank #5 32 Megabytes
> Probing Memory Bank #6 32 Megabytes
> Probing Memory Bank #7 32 Megabytes
> Incorrect configuration checksum;
> Setting NVRAM parameters to default values.
> Setting diag-switch? NVRAM parameter to true
> Probing CPU FMI,MB86907
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 5,0  espdma esp sd st
> SUNW,bpp ledma le
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 4,0  SUNW,CS4231 power-
> management
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 1,0  Nothing there
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 2,0  Nothing there
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 3,0  Nothing there
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 0,0  Nothing there
> screen not found.
> Can't open input device.
> Keyboard not present.  Using tty for input and output.
> Probing Memory Bank #0 32 Megabytes
> Probing Memory Bank #1 32 Megabytes
> Probing Memory Bank #2 32 Megabytes
> Probing Memory Bank #3 32 Megabytes
> Probing Memory Bank #4 32 Megabytes
> Probing Memory Bank #5 32 Megabytes
> Probing Memory Bank #6 32 Megabytes
> Probing Memory Bank #7 32 Megabytes
> Incorrect configuration checksum;
> Setting NVRAM parameters to default values.
> Setting diag-switch? NVRAM parameter to true
> Probing CPU FMI,MB86907
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 5,0  espdma esp sd st
> SUNW,bpp ledma le
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 4,0  SUNW,CS4231 power-
> management
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 1,0

New description:

 When I use the qemu-system-sparc built by MacPorts, it freezes during the
 emulated machine's startup process.  When I build it using gcc-apple-4.2,
 I have no such problem.

 {{{
 Power-ON Reset


 MB86907 POST 2.2.3 03SEP96

 Probing system memory: 32 32 32 32 32 32 32 32
 Config = 8800AAAA
 0Kb ecache detected

 initializing TLB
 initializing cache

 Allocating SRMMU Context Table
 Setting SRMMU Context Register
 Setting SRMMU Context Table Pointer Register
 Allocating SRMMU Level 1 Table
 Mapping RAM
 Mapping ROM

 ttya initialized
 Probing Memory Bank #0 32 Megabytes
 Probing Memory Bank #1 32 Megabytes
 Probing Memory Bank #2 32 Megabytes
 Probing Memory Bank #3 32 Megabytes
 Probing Memory Bank #4 32 Megabytes
 Probing Memory Bank #5 32 Megabytes
 Probing Memory Bank #6 32 Megabytes
 Probing Memory Bank #7 32 Megabytes
 Incorrect configuration checksum;
 Setting NVRAM parameters to default values.
 Setting diag-switch? NVRAM parameter to true
 Probing CPU FMI,MB86907
 Probing /iommu at 0,10000000/sbus at 0,10001000 at 5,0  espdma esp sd st
 SUNW,bpp ledma le
 Probing /iommu at 0,10000000/sbus at 0,10001000 at 4,0  SUNW,CS4231 power-
 management
 Probing /iommu at 0,10000000/sbus at 0,10001000 at 1,0  Nothing there
 Probing /iommu at 0,10000000/sbus at 0,10001000 at 2,0  Nothing there
 Probing /iommu at 0,10000000/sbus at 0,10001000 at 3,0  Nothing there
 Probing /iommu at 0,10000000/sbus at 0,10001000 at 0,0  Nothing there
 screen not found.
 Can't open input device.
 Keyboard not present.  Using tty for input and output.
 Probing Memory Bank #0 32 Megabytes
 Probing Memory Bank #1 32 Megabytes
 Probing Memory Bank #2 32 Megabytes
 Probing Memory Bank #3 32 Megabytes
 Probing Memory Bank #4 32 Megabytes
 Probing Memory Bank #5 32 Megabytes
 Probing Memory Bank #6 32 Megabytes
 Probing Memory Bank #7 32 Megabytes
 Incorrect configuration checksum;
 Setting NVRAM parameters to default values.
 Setting diag-switch? NVRAM parameter to true
 Probing CPU FMI,MB86907
 Probing /iommu at 0,10000000/sbus at 0,10001000 at 5,0  espdma esp sd st
 SUNW,bpp ledma le
 Probing /iommu at 0,10000000/sbus at 0,10001000 at 4,0  SUNW,CS4231 power-
 management
 Probing /iommu at 0,10000000/sbus at 0,10001000 at 1,0
 }}}

--

Comment:

 Thanks for the ticket. In the future, please Cc relevant port maintainers
 (`port info --maintainers`) and use WikiFormatting in ticket descriptions.

-- 
Ticket URL: <https://trac.macports.org/ticket/40244#comment:1>
MacPorts <http://www.macports.org/>
Ports system for OS X