[MacPorts] #43176: Self Update failed, need advice
MacPorts
noreply at macports.org
Wed Apr 2 15:15:15 PDT 2014
#43176: Self Update failed, need advice
------------------------+--------------------------------
Reporter: nblouin@… | Owner: macports-tickets@…
Type: update | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.2.1
Resolution: | Keywords:
Port: |
------------------------+--------------------------------
Description changed by ryandesign@…:
Old description:
> I am having difficulties configuring software which requires boost, so i
> downloaded boost vi macports and received a notice to update ports. Below
> the messages received, i also pasted the boost error i get when
> configuring new software.
> my query is 2-part:
> how do i get past the update error, and is this related to my configrure
> unable to locate my
>
> $ sudo port install boost
> Password:
> Warning: port definitions are more than two weeks old, consider updating
> them by running 'port selfupdate'.
> ---> Computing dependencies for boost
> ---> Cleaning boost
> ---> Scanning binaries for linking errors: 100.0%
> ---> No broken files found.
> BigMacWithCheese-2:silix-1.2.8 nicblouin$ port selfupdate
> ---> Updating MacPorts base sources using rsync
> Error: Error synchronizing MacPorts sources: command execution failed
> Please run `port -v selfupdate' for details.
> Error: /opt/local/bin/port: port selfupdate failed: Error synchronizing
> MacPorts sources: command execution failed
> e-2:silix-1.2.8$ port -v selfupdate
> ---> Updating MacPorts base sources using rsync
> receiving file list ... done
> rsync: mkstemp
> "/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/.base.tar.sMd7I5"
> failed: Permission denied (13)
> inflate returned -3 (140 bytes)
> rsync error: error in rsync protocol data stream (code 12) at
> /SourceCache/rsync/rsync-40/rsync/token.c(419) [receiver=2.6.9]
> rsync: connection unexpectedly closed (31 bytes received so far)
> [generator]
> rsync error: error in rsync protocol data stream (code 12) at
> /SourceCache/rsync/rsync-40/rsync/io.c(452) [generator=2.6.9]
> Command failed: /usr/bin/rsync -rtzv --delete-after
> rsync://rsync.macports.org/release/tarballs/base.tar
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs
> Exit code: 12
> Error: Error synchronizing MacPorts sources: command execution failed
> To report a bug, follow the instructions in the guide:
> http://guide.macports.org/#project.tickets
> Error: /opt/local/bin/port: port selfupdate failed: Error synchronizing
> MacPorts sources: command execution failed
> e-2:silix-1.2.8$
> e-2:silix-1.2.8 ./configure
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... ./install-sh -c -d
> checking for gawk... no
> checking for mawk... no
> checking for nawk... no
> checking for awk... awk
> checking whether make sets $(MAKE)... yes
> checking for g++... g++
> checking whether the C++ compiler works... yes
> checking for C++ compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> checking for style of include used by make... GNU
> checking dependency style of g++... gcc3
> checking for gcc... gcc
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking dependency style of gcc... gcc3
> checking build system type... x86_64-apple-darwin10.8.0
> checking host system type... x86_64-apple-darwin10.8.0
> checking how to print strings... printf
> checking for a sed that does not truncate output... /usr/bin/sed
> checking for grep that handles long lines and -e... /usr/bin/grep
> checking for egrep... /usr/bin/grep -E
> checking for fgrep... /usr/bin/grep -F
> checking for ld used by gcc... /usr/libexec/gcc/i686-apple-
> darwin10/4.2.1/ld
> checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is
> GNU ld... no
> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm
> checking the name lister (/usr/bin/nm) interface... BSD nm
> checking whether ln -s works... yes
> checking the maximum length of command line arguments... 196608
> checking whether the shell understands some XSI constructs... yes
> checking whether the shell understands "+="... yes
> checking how to convert x86_64-apple-darwin10.8.0 file names to x86_64
> -apple-darwin10.8.0 format... func_convert_file_noop
> checking how to convert x86_64-apple-darwin10.8.0 file names to toolchain
> format... func_convert_file_noop
> checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to
> reload object files... -r
> checking for objdump... no
> checking how to recognize dependent libraries... pass_all
> checking for dlltool... no
> checking how to associate runtime and link libraries... printf %s\n
> checking for ar... ar
> checking for archiver @FILE support... no
> checking for strip... strip
> checking for ranlib... ranlib
> checking command to parse /usr/bin/nm output from gcc object... ok
> checking for sysroot... no
> checking for mt... no
> checking if : is a manifest tool... no
> checking for dsymutil... dsymutil
> checking for nmedit... nmedit
> checking for lipo... lipo
> checking for otool... otool
> checking for otool64... no
> checking for -single_module linker flag... yes
> checking for -exported_symbols_list linker flag... yes
> checking for -force_load linker flag... yes
> checking how to run the C preprocessor... gcc -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking for dlfcn.h... yes
> checking for objdir... .libs
> checking if gcc supports -fno-rtti -fno-exceptions... no
> checking for gcc option to produce PIC... -fno-common -DPIC
> checking if gcc PIC flag -fno-common -DPIC works... yes
> checking if gcc static flag -static works... no
> checking if gcc supports -c -o file.o... yes
> checking if gcc supports -c -o file.o... (cached) yes
> checking whether the gcc linker (/usr/libexec/gcc/i686-apple-
> darwin10/4.2.1/ld) supports shared libraries... yes
> checking dynamic linker characteristics... darwin10.8.0 dyld
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking how to run the C++ preprocessor... g++ -E
> checking for ld used by g++... /usr/libexec/gcc/i686-apple-
> darwin10/4.2.1/ld
> checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is
> GNU ld... no
> checking whether the g++ linker (/usr/libexec/gcc/i686-apple-
> darwin10/4.2.1/ld) supports shared libraries... yes
> checking for g++ option to produce PIC... -fno-common -DPIC
> checking if g++ PIC flag -fno-common -DPIC works... yes
> checking if g++ static flag -static works... no
> checking if g++ supports -c -o file.o... yes
> checking if g++ supports -c -o file.o... (cached) yes
> checking whether the g++ linker (/usr/libexec/gcc/i686-apple-
> darwin10/4.2.1/ld) supports shared libraries... yes
> checking dynamic linker characteristics... darwin10.8.0 dyld
> checking how to hardcode library paths into programs... immediate
> checking for ANSI C header files... (cached) yes
> configure: Checking CppUnit
> checking for cppunit-config... no
> configure: CppUnit not found... unittesting disabled. Please install
> CppUnit
> configure: Checking Boost::program_options
> checking boost/program_options.hpp usability... no
> checking boost/program_options.hpp presence... no
> checking for boost/program_options.hpp... no
> configure: error: Boost::program_options header files were not found on
> the system... unable to compile. Please install Boost::program_options
> headers
> e-2:silix-1.2.8$
>
> Thanks for any help
>
> Nicolas Achille Blouin, Ph.D.
> Dept. of Biological Sciences
> University of Rhode Island
> Kingston, RI 02881
New description:
I am having difficulties configuring software which requires boost, so i
downloaded boost vi macports and received a notice to update ports. Below
the messages received, i also pasted the boost error i get when
configuring new software.
my query is 2-part:
how do i get past the update error, and is this related to my configrure
unable to locate my
{{{
$ sudo port install boost
Password:
Warning: port definitions are more than two weeks old, consider updating
them by running 'port selfupdate'.
---> Computing dependencies for boost
---> Cleaning boost
---> Scanning binaries for linking errors: 100.0%
---> No broken files found.
BigMacWithCheese-2:silix-1.2.8 nicblouin$ port selfupdate
---> Updating MacPorts base sources using rsync
Error: Error synchronizing MacPorts sources: command execution failed
Please run `port -v selfupdate' for details.
Error: /opt/local/bin/port: port selfupdate failed: Error synchronizing
MacPorts sources: command execution failed
e-2:silix-1.2.8$ port -v selfupdate
---> Updating MacPorts base sources using rsync
receiving file list ... done
rsync: mkstemp
"/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/.base.tar.sMd7I5"
failed: Permission denied (13)
inflate returned -3 (140 bytes)
rsync error: error in rsync protocol data stream (code 12) at
/SourceCache/rsync/rsync-40/rsync/token.c(419) [receiver=2.6.9]
rsync: connection unexpectedly closed (31 bytes received so far)
[generator]
rsync error: error in rsync protocol data stream (code 12) at
/SourceCache/rsync/rsync-40/rsync/io.c(452) [generator=2.6.9]
Command failed: /usr/bin/rsync -rtzv --delete-after
rsync://rsync.macports.org/release/tarballs/base.tar
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs
Exit code: 12
Error: Error synchronizing MacPorts sources: command execution failed
To report a bug, follow the instructions in the guide:
http://guide.macports.org/#project.tickets
Error: /opt/local/bin/port: port selfupdate failed: Error synchronizing
MacPorts sources: command execution failed
e-2:silix-1.2.8$
e-2:silix-1.2.8 ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking build system type... x86_64-apple-darwin10.8.0
checking host system type... x86_64-apple-darwin10.8.0
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/libexec/gcc/i686-apple-
darwin10/4.2.1/ld
checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is
GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm
checking the name lister (/usr/bin/nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 196608
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-apple-darwin10.8.0 file names to x86_64
-apple-darwin10.8.0 format... func_convert_file_noop
checking how to convert x86_64-apple-darwin10.8.0 file names to toolchain
format... func_convert_file_noop
checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to
reload object files... -r
checking for objdump... no
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... no
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for lipo... lipo
checking for otool... otool
checking for otool64... no
checking for -single_module linker flag... yes
checking for -exported_symbols_list linker flag... yes
checking for -force_load linker flag... yes
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fno-common -DPIC
checking if gcc PIC flag -fno-common -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/libexec/gcc/i686-apple-
darwin10/4.2.1/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin10.8.0 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/libexec/gcc/i686-apple-
darwin10/4.2.1/ld
checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is
GNU ld... no
checking whether the g++ linker (/usr/libexec/gcc/i686-apple-
darwin10/4.2.1/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fno-common -DPIC
checking if g++ PIC flag -fno-common -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/libexec/gcc/i686-apple-
darwin10/4.2.1/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin10.8.0 dyld
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
configure: Checking CppUnit
checking for cppunit-config... no
configure: CppUnit not found... unittesting disabled. Please install
CppUnit
configure: Checking Boost::program_options
checking boost/program_options.hpp usability... no
checking boost/program_options.hpp presence... no
checking for boost/program_options.hpp... no
configure: error: Boost::program_options header files were not found on
the system... unable to compile. Please install Boost::program_options
headers
e-2:silix-1.2.8$
}}}
Thanks for any help
Nicolas Achille Blouin, Ph.D. [[br]]
Dept. of Biological Sciences [[br]]
University of Rhode Island [[br]]
Kingston, RI 02881
--
--
Ticket URL: <https://trac.macports.org/ticket/43176#comment:1>
MacPorts <http://www.macports.org/>
Ports system for OS X
More information about the macports-tickets
mailing list