[MacPorts] #46147: smartmontools at 6.20 - smartd automated scanning failing
MacPorts
noreply at macports.org
Thu Dec 11 12:35:24 PST 2014
#46147: smartmontools at 6.20 - smartd automated scanning failing
----------------------------+------------------------
Reporter: thatrat@… | Owner: takanori@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.3.3
Resolution: | Keywords:
Port: smartmontools |
----------------------------+------------------------
Comment (by thatrat@…):
It looks like the patch worked.
From the below, the increments in testing are recent relative to the power
on hours value:
{{{
Ubences-Intel-iMac:smartmontools uquevedo$ smartctl -a /dev/disk0
smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Black
Device Model: WDC WD1002FAEX-00Y9A0
Serial Number: [hiding this]
LU WWN Device Id: 5 0014ee 2064339e8
Firmware Version: 05.01D05
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Dec 11 12:32:48 2014 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting
command from host.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has
ever
been run.
Total time to complete Offline
data collection: (16860) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon
new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 174) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 13
3 Spin_Up_Time 0x0027 174 170 021 Pre-fail Always
- 4300
4 Start_Stop_Count 0x0032 076 076 000 Old_age Always
- 24413
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always
- 5149
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 079 079 000 Old_age Always
- 21882
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 21
193 Load_Cycle_Count 0x0032 192 192 000 Old_age Always
- 24391
194 Temperature_Celsius 0x0022 102 081 000 Old_age Always
- 45
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline
- 1
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5146
-
# 2 Extended offline Completed without error 00% 5143
-
# 3 Short offline Completed without error 00% 5140
-
# 4 Extended offline Completed without error 00% 5135
-
# 5 Extended offline Completed without error 00% 5124
-
# 6 Short offline Completed without error 00% 5120
-
# 7 Short offline Completed without error 00% 5093
-
# 8 Extended offline Completed without error 00% 5082
-
# 9 Short offline Completed without error 00% 5069
-
#10 Short offline Completed without error 00% 5066
-
#11 Extended offline Completed without error 00% 4673
-
#12 Extended offline Completed without error 00% 4080
-
#13 Short offline Completed without error 00% 2987
-
#14 Extended offline Aborted by host 80% 2985
-
#15 Short offline Completed without error 00% 2982
-
#16 Short offline Completed without error 00% 2975
-
#17 Short offline Aborted by host 90% 2962
-
#18 Short offline Completed without error 00% 2960
-
#19 Short offline Completed without error 00% 2957
-
#20 Short offline Completed without error 00% 2956
-
#21 Short offline Completed without error 00% 2950
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute
delay.
}}}
Can this patch be rolled into the main release so I can update some other
systems to test?
--
Ticket URL: <https://trac.macports.org/ticket/46147#comment:5>
MacPorts <https://www.macports.org/>
Ports system for OS X
More information about the macports-tickets
mailing list