[MacPorts] #42227: antlr 2.7.7-1 fails to uncompress on sudo port upgrade outdated
MacPorts
noreply at macports.org
Wed Jan 22 17:54:05 PST 2014
#42227: antlr 2.7.7-1 fails to uncompress on sudo port upgrade outdated
----------------------------------+--------------------------------
Reporter: ian.scott-fleming@… | Owner: macports-tickets@…
Type: defect | Status: closed
Priority: Normal | Milestone:
Component: ports | Version: 2.2.1
Resolution: invalid | Keywords:
Port: |
----------------------------------+--------------------------------
Changes (by larryv@…):
* status: new => closed
* resolution: => invalid
Old description:
> "sudo port upgrade outdated" fails with "Error: org.macports.extract for
> port antlr returned: command execution failed". From antlr/main.log,
> problem appears to be that macports is looking in wrong place for gnutar.
>
> Have just upgraded OS X from 10.6.8 to 10.9 (Mavericks)
> XCode 5.0.2
> G++ v.4.2.1
>
> from antlr/main.log:
>
> :info:extract sh: /usr/bin/gnutar: No such file or directory
>
> Did sudo port install gnutar, which installed gnutar @1.27.1_0 to
> /sw/bin/gnutar, not to /usr/bin/gnutar
>
> d25ft0k8dhjv:iscottfl:~ $ which gnutar
> /sw/bin/gnutar
>
> have done
> sudo port selfupdate
> sudo port clean antlr
> but still get same error
>
> Following is output of selfupdate, clean and upgrade outdated, and
> contents of antlr/main.log.
>
> Thanks for your attention to this. Have attempted to find solution in
> wiki, but not found anything specific to solve the problem.
>
> d25ft0k8dhjv:iscottfl:~ $ sudo port selfupdate
> ---> Updating MacPorts base sources using rsync
> MacPorts base version 2.2.1 installed,
> MacPorts base version 2.2.1 downloaded.
> ---> Updating the ports tree
> ---> MacPorts base is already the latest version
>
> The ports tree has been updated. To upgrade your installed ports, you
> should run
> port upgrade outdated
> d25ft0k8dhjv:iscottfl:~ $ sudo port clean antlr
> ---> Cleaning antlr
> d25ft0k8dhjv:iscottfl:~ $ sudo port upgrade outdated
> ---> Fetching archive for antlr
> ---> Attempting to fetch antlr-2.7.7_1.darwin_13.x86_64.tbz2 from
> http://packages.macports.org/antlr
> ---> Attempting to fetch antlr-2.7.7_1.darwin_13.x86_64.tbz2 from
> http://lil.fr.packages.macports.org/antlr
> ---> Attempting to fetch antlr-2.7.7_1.darwin_13.x86_64.tbz2 from
> http://mse.uk.packages.macports.org/sites/packages.macports.org/antlr
> ---> Fetching distfiles for antlr
> ---> Verifying checksums for antlr
> ---> Extracting antlr
> Error: org.macports.extract for port antlr returned: command execution
> failed
> Please see the log file for port antlr for details:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/main.log
> Error: Unable to upgrade port: 1
> To report a bug, follow the instructions in the guide:
> http://guide.macports.org/#project.tickets
> d25ft0k8dhjv:iscottfl:~ $ cat
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/main.log
> version:1
> :debug:main Executing org.macports.main (antlr)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 501
> :debug:main euid changed to: 2041937582
> :debug:fetch fetch phase started at Wed Jan 22 14:00:28 CST 2014
> :notice:fetch ---> Fetching distfiles for antlr
> :debug:fetch Executing org.macports.fetch (antlr)
> :debug:fetch Privilege de-escalation not attempted as not running as
> root.
> :debug:checksum checksum phase started at Wed Jan 22 14:00:28 CST 2014
> :notice:checksum ---> Verifying checksums for antlr
> :debug:checksum Executing org.macports.checksum (antlr)
> :info:checksum ---> Checksumming antlr-2.7.7.tar.gz
> :debug:checksum Correct (md5) checksum for antlr-2.7.7.tar.gz
> :debug:checksum Correct (sha1) checksum for antlr-2.7.7.tar.gz
> :debug:checksum Correct (rmd160) checksum for antlr-2.7.7.tar.gz
> :debug:checksum Privilege de-escalation not attempted as not running as
> root.
> :debug:extract extract phase started at Wed Jan 22 14:00:28 CST 2014
> :notice:extract ---> Extracting antlr
> :debug:extract Executing org.macports.extract (antlr)
> :info:extract ---> Extracting antlr-2.7.7.tar.gz
> :debug:extract setting option extract.args to
> '/opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz'
> :debug:extract Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.9'
> :debug:extract Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/work"
> && /usr/bin/gzip -dc
> '/opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz' |
> /usr/bin/gnutar --no-same-owner -xf -'
> :debug:extract Executing command line: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/work"
> && /usr/bin/gzip -dc
> '/opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz' |
> /usr/bin/gnutar --no-same-owner -xf -
> :info:extract sh: /usr/bin/gnutar: No such file or directory
> :info:extract gzip: error writing to output: Broken pipe
> :info:extract gzip:
> /opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz: uncompress
> failed
> :info:extract Command failed: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/work"
> && /usr/bin/gzip -dc
> '/opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz' |
> /usr/bin/gnutar --no-same-owner -xf -
> :info:extract Exit code: 127
> :error:extract org.macports.extract for port antlr returned: command
> execution failed
> :debug:extract Error code: NONE
> :debug:extract Backtrace: command execution failed
> while executing
> "$procedure $targetname"
> :info:extract Warning: targets not executed for antlr:
> org.macports.destroot org.macports.extract org.macports.patch
> org.macports.configure org.macports.build
> :notice:extract Please see the log file for port antlr for details:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/main.log
> d25ft0k8dhjv:iscottfl:~ $
> d25ft0k8dhjv:iscottfl:~ $
> d25ft0k8dhjv:iscottfl:~ $ /usr/bin/gnutar
> -bash: /usr/bin/gnutar: No such file or directory
> d25ft0k8dhjv:iscottfl:~ $ /sw/bin/gnutar
> /sw/bin/gnutar: You must specify one of the `-Acdtrux' or `--test-label'
> options
> Try `/sw/bin/gnutar --help' or `/sw/bin/gnutar --usage' for more
> information.
> d25ft0k8dhjv:iscottfl:~ $
New description:
"sudo port upgrade outdated" fails with "Error: org.macports.extract for
port antlr returned: command execution failed". From antlr/main.log,
problem appears to be that macports is looking in wrong place for gnutar.
Have just upgraded OS X from 10.6.8 to 10.9 (Mavericks)\\
XCode 5.0.2\\
G++ v.4.2.1
from antlr/main.log:
{{{
:info:extract sh: /usr/bin/gnutar: No such file or directory
}}}
Did `sudo port install gnutar`, which installed gnutar @1.27.1_0 to
`/sw/bin/gnutar`, not to `/usr/bin/gnutar`
{{{
d25ft0k8dhjv:iscottfl:~ $ which gnutar
/sw/bin/gnutar
}}}
have done
{{{
sudo port selfupdate
sudo port clean antlr
}}}
but still get same error
Following is output of selfupdate, clean and upgrade outdated, and
contents of antlr/main.log.
Thanks for your attention to this. Have attempted to find solution in
wiki, but not found anything specific to solve the problem.
{{{
d25ft0k8dhjv:iscottfl:~ $ sudo port selfupdate
---> Updating MacPorts base sources using rsync
MacPorts base version 2.2.1 installed,
MacPorts base version 2.2.1 downloaded.
---> Updating the ports tree
---> MacPorts base is already the latest version
The ports tree has been updated. To upgrade your installed ports, you
should run
port upgrade outdated
d25ft0k8dhjv:iscottfl:~ $ sudo port clean antlr
---> Cleaning antlr
d25ft0k8dhjv:iscottfl:~ $ sudo port upgrade outdated
---> Fetching archive for antlr
---> Attempting to fetch antlr-2.7.7_1.darwin_13.x86_64.tbz2 from
http://packages.macports.org/antlr
---> Attempting to fetch antlr-2.7.7_1.darwin_13.x86_64.tbz2 from
http://lil.fr.packages.macports.org/antlr
---> Attempting to fetch antlr-2.7.7_1.darwin_13.x86_64.tbz2 from
http://mse.uk.packages.macports.org/sites/packages.macports.org/antlr
---> Fetching distfiles for antlr
---> Verifying checksums for antlr
---> Extracting antlr
Error: org.macports.extract for port antlr returned: command execution
failed
Please see the log file for port antlr for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/main.log
Error: Unable to upgrade port: 1
To report a bug, follow the instructions in the guide:
http://guide.macports.org/#project.tickets
d25ft0k8dhjv:iscottfl:~ $ cat
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/main.log
version:1
:debug:main Executing org.macports.main (antlr)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 2041937582
:debug:fetch fetch phase started at Wed Jan 22 14:00:28 CST 2014
:notice:fetch ---> Fetching distfiles for antlr
:debug:fetch Executing org.macports.fetch (antlr)
:debug:fetch Privilege de-escalation not attempted as not running as root.
:debug:checksum checksum phase started at Wed Jan 22 14:00:28 CST 2014
:notice:checksum ---> Verifying checksums for antlr
:debug:checksum Executing org.macports.checksum (antlr)
:info:checksum ---> Checksumming antlr-2.7.7.tar.gz
:debug:checksum Correct (md5) checksum for antlr-2.7.7.tar.gz
:debug:checksum Correct (sha1) checksum for antlr-2.7.7.tar.gz
:debug:checksum Correct (rmd160) checksum for antlr-2.7.7.tar.gz
:debug:checksum Privilege de-escalation not attempted as not running as
root.
:debug:extract extract phase started at Wed Jan 22 14:00:28 CST 2014
:notice:extract ---> Extracting antlr
:debug:extract Executing org.macports.extract (antlr)
:info:extract ---> Extracting antlr-2.7.7.tar.gz
:debug:extract setting option extract.args to
'/opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.9'
:debug:extract Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/work"
&& /usr/bin/gzip -dc
'/opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz' |
/usr/bin/gnutar --no-same-owner -xf -'
:debug:extract Executing command line: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/work"
&& /usr/bin/gzip -dc
'/opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz' |
/usr/bin/gnutar --no-same-owner -xf -
:info:extract sh: /usr/bin/gnutar: No such file or directory
:info:extract gzip: error writing to output: Broken pipe
:info:extract gzip:
/opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz: uncompress
failed
:info:extract Command failed: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/work"
&& /usr/bin/gzip -dc
'/opt/local/var/macports/distfiles/antlr/antlr-2.7.7.tar.gz' |
/usr/bin/gnutar --no-same-owner -xf -
:info:extract Exit code: 127
:error:extract org.macports.extract for port antlr returned: command
execution failed
:debug:extract Error code: NONE
:debug:extract Backtrace: command execution failed
while executing
"$procedure $targetname"
:info:extract Warning: targets not executed for antlr:
org.macports.destroot org.macports.extract org.macports.patch
org.macports.configure org.macports.build
:notice:extract Please see the log file for port antlr for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_antlr/antlr/main.log
d25ft0k8dhjv:iscottfl:~ $
d25ft0k8dhjv:iscottfl:~ $
d25ft0k8dhjv:iscottfl:~ $ /usr/bin/gnutar
-bash: /usr/bin/gnutar: No such file or directory
d25ft0k8dhjv:iscottfl:~ $ /sw/bin/gnutar
/sw/bin/gnutar: You must specify one of the `-Acdtrux' or `--test-label'
options
Try `/sw/bin/gnutar --help' or `/sw/bin/gnutar --usage' for more
information.
d25ft0k8dhjv:iscottfl:~ $
}}}
--
Comment:
Please use WikiFormatting in ticket descriptions.
Replying to [ticket:42227 ian.scott-fleming@…]:
> Have just upgraded OS X from 10.6.8 to 10.9 (Mavericks)
You need to follow the [[Migration|migration instructions]]. MacPorts
records the location of the system’s `tar` on installation; Mavericks no
longer has `/usr/bin/gnutar`, but your MacPorts installation is still
trying to use the old executable.
> Did sudo port install gnutar, which installed gnutar @1.27.1_0 to
> /sw/bin/gnutar, not to /usr/bin/gnutar
The log you attached suggests that your MacPorts is installed to
`/opt/local`, so `/sw/bin/gnutar` is coming from somewhere else. Probably
Fink.
Note that we don’t support having Fink installed at the same time as
MacPorts, as it can interfere with builds.
--
Ticket URL: <https://trac.macports.org/ticket/42227#comment:1>
MacPorts <http://www.macports.org/>
Ports system for OS X
More information about the macports-tickets
mailing list