[MacPorts] #42776: NEW: hplip @3.14.1

[MacPorts]

#42776: NEW: hplip @3.14.1
---------------------------+--------------------------------
  Reporter:  okmacports@…  |      Owner:  macports-tickets@…
      Type:  submission    |     Status:  new
  Priority:  Normal        |  Milestone:
 Component:  ports         |    Version:
Resolution:                |   Keywords:
      Port:  hplip         |
---------------------------+--------------------------------
Changes (by macsforever2000@…):

 * version:  2.2.1 =>


Old description:

> This replaces tickets [https://trac.macports.org/ticket/30061 #30061] and
> [https://trac.macports.org/ticket/7201 #7201]
>
> I am resubmitting the Portfile to attempt to resolve the issues raised in
> the other ticket. Since several files are new, I am opening this as a new
> ticket, intended to replace the old one(s).
>
> This port of HPLIP provides scanner support of HP all-in-one (HPAIO)
> printers, particularly intended to be used with SANE. (Note that it works
> under the MacPorts versions of xsane and saned, not the OS X versions.)
>
> The official project page is ​http://hplipopensource.com/. It's a
> project, funded by HP, that creates open-source drivers for HP's
> printers/scanners.
>
> While the intent of this port is to provide scanning support (because
> CUPS already supports printing to HP all-in-one printers under OS X), the
> port also provides printing support, so your HPAIO printers may appear
> duplicated.
>
> Usage notes:
>
> * to use across a network, start saned with the -a option. Make sure
> you've edited saned.conf in /opt/local/etc/sane.d/ to allow access from
> local IP addresses (such as by uncommenting the line 192.168.0.1/29).
> * as noted repeatedly at the SANE project, run saned behind a firewall
> and don't run it as root!
> * make sure you activate the launchctl daemon and client items (client
> being the same user that runs saned) as noted in the installation log.

New description:

 This replaces tickets #30061 and #7201.

 I am resubmitting the Portfile to attempt to resolve the issues raised in
 the other ticket. Since several files are new, I am opening this as a new
 ticket, intended to replace the old one(s).

 This port of HPLIP provides scanner support of HP all-in-one (HPAIO)
 printers, particularly intended to be used with SANE. (Note that it works
 under the MacPorts versions of xsane and saned, not the OS X versions.)

 The official project page is ​http://hplipopensource.com/. It's a project,
 funded by HP, that creates open-source drivers for HP's printers/scanners.

 While the intent of this port is to provide scanning support (because CUPS
 already supports printing to HP all-in-one printers under OS X), the port
 also provides printing support, so your HPAIO printers may appear
 duplicated.

 Usage notes:

 * to use across a network, start saned with the -a option. Make sure
 you've edited saned.conf in /opt/local/etc/sane.d/ to allow access from
 local IP addresses (such as by uncommenting the line 192.168.0.1/29).
 * as noted repeatedly at the SANE project, run saned behind a firewall and
 don't run it as root!
 * make sure you activate the launchctl daemon and client items (client
 being the same user that runs saned) as noted in the installation log.

--

-- 
Ticket URL: <https://trac.macports.org/ticket/42776#comment:1>
MacPorts <http://www.macports.org/>
Ports system for OS X