[MacPorts] #46710: graphviz @2.38.0 fails to install with automake 1.15 (was: graphviz @2.38.0 fails to install on yosemite)
MacPorts
noreply at macports.org
Fri Jan 30 08:39:48 PST 2015
#46710: graphviz @2.38.0 fails to install with automake 1.15
-------------------------+--------------------------
Reporter: hahn.seb@… | Owner: ryandesign@…
Type: defect | Status: assigned
Priority: Normal | Milestone:
Component: ports | Version: 2.3.3
Resolution: | Keywords:
Port: graphviz |
-------------------------+--------------------------
Changes (by ryandesign@…):
* cc: ryandesign@… (removed)
* owner: macports-tickets@… => ryandesign@…
* status: new => assigned
Old description:
> I'm getting the following error log:
>
> {{{
> version:1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean pkgconfig 0.28_0 exists in the ports tree
> :debug:clean pkgconfig 0.28_0 is the latest installed
> :debug:clean pkgconfig 0.28_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! pkgconfig 0.28_0 >= pkgconfig 0.28_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libiconv 1.14_0 exists in the ports tree
> :debug:clean libiconv 1.14_0 is the latest installed
> :debug:clean libiconv 1.14_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:clean epoch: in tree: 1 installed: 1
> :debug:clean autoconf 2.69_2 exists in the ports tree
> :debug:clean autoconf 2.69_2 is the latest installed
> :debug:clean autoconf 2.69_2 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! autoconf 2.69_2 >= autoconf 2.69_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean perl5 5.12.4_0 exists in the ports tree
> :debug:clean perl5 5.12.4_0 +perl5_16 is the latest installed
> :debug:clean perl5 5.12.4_0 +perl5_16 is active
> :debug:clean Merging existing variants '+perl5_16' into variants
> :debug:clean new fully merged portvariants: perl5_16 +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean universal_variant is false, so not adding the default
> universal variant
> :debug:clean Executing variant perl5_16 provides perl5_16
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean perl5.16 5.16.3_1 exists in the ports tree
> :debug:clean perl5.16 5.16.3_1 is the latest installed
> :debug:clean perl5.16 5.16.3_1 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.16
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! perl5.16 5.16.3_1 >= perl5.16 5.16.3_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean gdbm 1.11_1 exists in the ports tree
> :debug:clean gdbm 1.11_1 is the latest installed
> :debug:clean gdbm 1.11_1 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! gdbm 1.11_1 >= gdbm 1.11_1
> :debug:clean epoch: in tree: 2 installed: 2
> :debug:clean gettext 0.19.4_0 exists in the ports tree
> :debug:clean gettext 0.19.4_0 is the latest installed
> :debug:clean gettext 0.19.4_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup compiler_blacklist_versions 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean compiler clang 600.0.56 not blacklisted because it doesn't
> match {clang < 211.10.1}
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! gettext 0.19.4_0 >= gettext 0.19.4_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean expat 2.1.0_0 exists in the ports tree
> :debug:clean expat 2.1.0_0 is the latest installed
> :debug:clean expat 2.1.0_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean ncurses 5.9_2 exists in the ports tree
> :debug:clean ncurses 5.9_2 is the latest installed
> :debug:clean ncurses 5.9_2 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean m4 1.4.17_0 exists in the ports tree
> :debug:clean m4 1.4.17_0 is the latest installed
> :debug:clean m4 1.4.17_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! m4 1.4.17_0 >= m4 1.4.17_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean automake 1.15_0 exists in the ports tree
> :debug:clean automake 1.15_0 is the latest installed
> :debug:clean automake 1.15_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! automake 1.15_0 >= automake 1.15_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libtool 2.4.4_0 exists in the ports tree
> :debug:clean libtool 2.4.4_0 is the latest installed
> :debug:clean libtool 2.4.4_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! libtool 2.4.4_0 >= libtool 2.4.4_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean jpeg 9a_1 exists in the ports tree
> :debug:clean jpeg 9a_1 is the latest installed
> :debug:clean jpeg 9a_1 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! jpeg 9a_1 >= jpeg 9a_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libpng 1.6.16_0 exists in the ports tree
> :debug:clean libpng 1.6.16_0 is the latest installed
> :debug:clean libpng 1.6.16_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! libpng 1.6.16_0 >= libpng 1.6.16_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean zlib 1.2.8_0 exists in the ports tree
> :debug:clean zlib 1.2.8_0 is the latest installed
> :debug:clean zlib 1.2.8_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup xcodeversion 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! zlib 1.2.8_0 >= zlib 1.2.8_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean webp 0.4.2_0 exists in the ports tree
> :debug:clean webp 0.4.2_0 is the latest installed
> :debug:clean webp 0.4.2_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/webp
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! webp 0.4.2_0 >= webp 0.4.2_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean tiff 4.0.3_4 exists in the ports tree
> :debug:clean tiff 4.0.3_4 is the latest installed
> :debug:clean tiff 4.0.3_4 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup xcodeversion 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! tiff 4.0.3_4 >= tiff 4.0.3_4
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xz 5.0.7_0 exists in the ports tree
> :debug:clean xz 5.0.7_0 is the latest installed
> :debug:clean xz 5.0.7_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xz 5.0.7_0 >= xz 5.0.7_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean fontconfig 2.11.1_0 exists in the ports tree
> :debug:clean fontconfig 2.11.1_0 is the latest installed
> :debug:clean fontconfig 2.11.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! fontconfig 2.11.1_0 >= fontconfig
> 2.11.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean freetype 2.5.5_0 exists in the ports tree
> :debug:clean freetype 2.5.5_0 is the latest installed
> :debug:clean freetype 2.5.5_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! freetype 2.5.5_0 >= freetype 2.5.5_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean bzip2 1.0.6_0 exists in the ports tree
> :debug:clean bzip2 1.0.6_0 is the latest installed
> :debug:clean bzip2 1.0.6_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean gd2 2.1.1_0 exists in the ports tree
> :debug:clean gd2 2.1.1_0 +x11 is the latest installed
> :debug:clean gd2 2.1.1_0 +x11 is active
> :debug:clean Merging existing variants '+x11' into variants
> :debug:clean new fully merged portvariants: x11 +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/gd2
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup bitbucket 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/bitbucket-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Re-registering default for distname
> :debug:clean Re-registering default for livecheck.type
> :debug:clean Re-registering default for livecheck.url
> :debug:clean Re-registering default for livecheck.regex
> :debug:clean Re-registering default for livecheck.version
> :debug:clean Re-registering default for distname
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Executing variant x11 provides x11
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! gd2 2.1.1_0 >= gd2 2.1.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libvpx 1.3.0_1 exists in the ports tree
> :debug:clean libvpx 1.3.0_1 is the latest installed
> :debug:clean libvpx 1.3.0_1 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libvpx
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup compiler_blacklist_versions 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean compiler clang 600.0.56 not blacklisted because it doesn't
> match {clang < 421}
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! libvpx 1.3.0_1 >= libvpx 1.3.0_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xpm 3.5.11_0 exists in the ports tree
> :debug:clean xpm 3.5.11_0 is the latest installed
> :debug:clean xpm 3.5.11_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xpm
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xpm 3.5.11_0 >= xpm 3.5.11_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libXt 1.1.4_0 exists in the ports tree
> :debug:clean xorg-libXt 1.1.4_0 is the latest installed
> :debug:clean xorg-libXt 1.1.4_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXt
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-libXt 1.1.4_0 >= xorg-libXt 1.1.4_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libsm 1.2.1_0 exists in the ports tree
> :debug:clean xorg-libsm 1.2.1_0 is the latest installed
> :debug:clean xorg-libsm 1.2.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libsm
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libice 1.0.8_0 exists in the ports tree
> :debug:clean xorg-libice 1.0.8_0 is the latest installed
> :debug:clean xorg-libice 1.0.8_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libice
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-libice 1.0.8_0 >= xorg-libice
> 1.0.8_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-xproto 7.0.26_0 exists in the ports tree
> :debug:clean xorg-xproto 7.0.26_0 is the latest installed
> :debug:clean xorg-xproto 7.0.26_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xproto
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-xproto 7.0.26_0 >= xorg-xproto
> 7.0.26_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libX11 1.6.2_0 exists in the ports tree
> :debug:clean xorg-libX11 1.6.2_0 is the latest installed
> :debug:clean xorg-libX11 1.6.2_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libX11
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-libX11 1.6.2_0 >= xorg-libX11
> 1.6.2_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libXdmcp 1.1.1_0 exists in the ports tree
> :debug:clean xorg-libXdmcp 1.1.1_0 is the latest installed
> :debug:clean xorg-libXdmcp 1.1.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXdmcp
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp
> 1.1.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libXau 1.0.8_0 exists in the ports tree
> :debug:clean xorg-libXau 1.0.8_0 is the latest installed
> :debug:clean xorg-libXau 1.0.8_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXau
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-libXau 1.0.8_0 >= xorg-libXau
> 1.0.8_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libxcb 1.11_1 exists in the ports tree
> :debug:clean xorg-libxcb 1.11_1 +python27 is the latest installed
> :debug:clean xorg-libxcb 1.11_1 +python27 is active
> :debug:clean Merging existing variants '+python27' into variants
> :debug:clean new fully merged portvariants: python27 +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libxcb
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant python27 provides python27
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-libxcb 1.11_1 >= xorg-libxcb 1.11_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-xcb-proto 1.11_1 exists in the ports tree
> :debug:clean xorg-xcb-proto 1.11_1 +python27 is the latest installed
> :debug:clean xorg-xcb-proto 1.11_1 +python27 is active
> :debug:clean Merging existing variants '+python27' into variants
> :debug:clean new fully merged portvariants: python27 +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xcb-proto
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Executing variant python27 provides python27
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-xcb-proto 1.11_1 >= xorg-xcb-proto
> 1.11_1
> :debug:clean epoch: in tree: 2 installed: 2
> :debug:clean python27 2.7.9_0 exists in the ports tree
> :debug:clean python27 2.7.9_0 is the latest installed
> :debug:clean python27 2.7.9_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup select 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! python27 2.7.9_0 >= python27 2.7.9_0
> :debug:clean epoch: in tree: 1 installed: 1
> :debug:clean openssl 1.0.1k_0 exists in the ports tree
> :debug:clean openssl 1.0.1k_0 is the latest installed
> :debug:clean openssl 1.0.1k_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! openssl 1.0.1k_0 >= openssl 1.0.1k_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean sqlite3 3.8.8.1_0 exists in the ports tree
> :debug:clean sqlite3 3.8.8.1_0 is the latest installed
> :debug:clean sqlite3 3.8.8.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! sqlite3 3.8.8.1_0 >= sqlite3 3.8.8.1_0
> :debug:clean epoch: in tree: 20090923 installed: 20090923
> :debug:clean libedit 20140620-3.1_0 exists in the ports tree
> :debug:clean libedit 20140620-3.1_0 is the latest installed
> :debug:clean libedit 20140620-3.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! libedit 20140620-3.1_0 >= libedit
> 20140620-3.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean db48 4.8.30_4 exists in the ports tree
> :debug:clean db48 4.8.30_4 is the latest installed
> :debug:clean db48 4.8.30_4 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db48
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Sourcing PortGroup select 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! db48 4.8.30_4 >= db48 4.8.30_4
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean db_select 0.1_2 exists in the ports tree
> :debug:clean db_select 0.1_2 is the latest installed
> :debug:clean db_select 0.1_2 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/db_select
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup select 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:clean universal_variant is false, so not adding the default
> universal variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! db_select 0.1_2 >= db_select 0.1_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean python_select 0.3_4 exists in the ports tree
> :debug:clean python_select 0.3_4 is the latest installed
> :debug:clean python_select 0.3_4 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup select 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:clean universal_variant is false, so not adding the default
> universal variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! python_select 0.3_4 >= python_select
> 0.3_4
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libxml2 2.9.2_1 exists in the ports tree
> :debug:clean libxml2 2.9.2_1 is the latest installed
> :debug:clean libxml2 2.9.2_1 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! libxml2 2.9.2_1 >= libxml2 2.9.2_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libpthread-stubs 0.3_0 exists in the ports tree
> :debug:clean xorg-libpthread-stubs 0.3_0 is the latest installed
> :debug:clean xorg-libpthread-stubs 0.3_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libpthread-stubs
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
> libpthread-stubs 0.3_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-kbproto 1.0.6_0 exists in the ports tree
> :debug:clean xorg-kbproto 1.0.6_0 is the latest installed
> :debug:clean xorg-kbproto 1.0.6_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-kbproto
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto
> 1.0.6_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libXext 1.3.3_0 exists in the ports tree
> :debug:clean xorg-libXext 1.3.3_0 is the latest installed
> :debug:clean xorg-libXext 1.3.3_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXext
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-libXext 1.3.3_0 >= xorg-libXext
> 1.3.3_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-xextproto 7.3.0_0 exists in the ports tree
> :debug:clean xorg-xextproto 7.3.0_0 is the latest installed
> :debug:clean xorg-xextproto 7.3.0_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xextproto
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-xextproto 7.3.0_0 >= xorg-xextproto
> 7.3.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean poppler 0.30.0_0 exists in the ports tree
> :debug:clean poppler 0.30.0_0 is the latest installed
> :debug:clean poppler 0.30.0_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/poppler
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup compiler_blacklist_versions 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
> :debug:clean Sourcing PortGroup gobject_introspection 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/gobject_introspection-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean compiler gcc-4.0 blacklisted because it's not installed or
> it doesn't work
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! poppler 0.30.0_0 >= poppler 0.30.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean curl 7.40.0_0 exists in the ports tree
> :debug:clean curl 7.40.0_0 +ssl is the latest installed
> :debug:clean curl 7.40.0_0 +ssl is active
> :debug:clean Merging existing variants '+ssl' into variants
> :debug:clean new fully merged portvariants: ssl +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/curl
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Executing variant ssl provides ssl
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! curl 7.40.0_0 >= curl 7.40.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libidn 1.29_0 exists in the ports tree
> :debug:clean libidn 1.29_0 is the latest installed
> :debug:clean libidn 1.29_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/mail/libidn
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup conflicts_build 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! libidn 1.29_0 >= libidn 1.29_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean curl-ca-bundle 7.40.0_0 exists in the ports tree
> :debug:clean curl-ca-bundle 7.40.0_0 is the latest installed
> :debug:clean curl-ca-bundle 7.40.0_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/curl
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean universal_variant is false, so not adding the default
> universal variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! curl-ca-bundle 7.40.0_0 >= curl-ca-
> bundle 7.40.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean glib2 2.42.1_0 exists in the ports tree
> :debug:clean glib2 2.42.1_0 is the latest installed
> :debug:clean glib2 2.42.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup compiler_blacklist_versions 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
> :debug:clean Sourcing PortGroup conflicts_build 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
> :debug:clean compiler clang 600.0.56 not blacklisted because it doesn't
> match {clang < 318}
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! glib2 2.42.1_0 >= glib2 2.42.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libffi 3.2.1_0 exists in the ports tree
> :debug:clean libffi 3.2.1_0 is the latest installed
> :debug:clean libffi 3.2.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! libffi 3.2.1_0 >= libffi 3.2.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean cairo 1.14.0_0 exists in the ports tree
> :debug:clean cairo 1.14.0_0 +quartz+x11 is the latest installed
> :debug:clean cairo 1.14.0_0 +quartz+x11 is active
> :debug:clean Merging existing variants '+quartz+x11' into variants
> :debug:clean new fully merged portvariants: x11 + quartz +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup compiler_blacklist_versions 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Sourcing PortGroup xcodeversion 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:clean compiler clang 600.0.56 not blacklisted because it doesn't
> match {clang < 318.0.61}
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Executing variant quartz provides quartz
> :debug:clean Executing variant x11 provides x11
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! cairo 1.14.0_0 >= cairo 1.14.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libpixman 0.32.6_0 exists in the ports tree
> :debug:clean libpixman 0.32.6_0 is the latest installed
> :debug:clean libpixman 0.32.6_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup compiler_blacklist_versions 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean compiler clang 600.0.56 not blacklisted because it doesn't
> match {clang < 211.10.1}
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! libpixman 0.32.6_0 >= libpixman 0.32.6_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xrender 0.9.8_0 exists in the ports tree
> :debug:clean xrender 0.9.8_0 is the latest installed
> :debug:clean xrender 0.9.8_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xrender 0.9.8_0 >= xrender 0.9.8_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-renderproto 0.11.1_0 exists in the ports tree
> :debug:clean xorg-renderproto 0.11.1_0 is the latest installed
> :debug:clean xorg-renderproto 0.11.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-renderproto
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
> renderproto 0.11.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-xcb-util 0.3.9_0 exists in the ports tree
> :debug:clean xorg-xcb-util 0.3.9_0 is the latest installed
> :debug:clean xorg-xcb-util 0.3.9_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xcb-util
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util
> 0.3.9_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean lcms2 2.6_0 exists in the ports tree
> :debug:clean lcms2 2.6_0 is the latest installed
> :debug:clean lcms2 2.6_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms2
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! lcms2 2.6_0 >= lcms2 2.6_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean openjpeg15 1.5.1_0 exists in the ports tree
> :debug:clean openjpeg15 1.5.1_0 is the latest installed
> :debug:clean openjpeg15 1.5.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/openjpeg15
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! openjpeg15 1.5.1_0 >= openjpeg15 1.5.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean jbigkit 2.1_0 exists in the ports tree
> :debug:clean jbigkit 2.1_0 is the latest installed
> :debug:clean jbigkit 2.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jbigkit
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! jbigkit 2.1_0 >= jbigkit 2.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean poppler-data 0.4.7_0 exists in the ports tree
> :debug:clean poppler-data 0.4.7_0 is the latest installed
> :debug:clean poppler-data 0.4.7_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics
> /poppler-data
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean universal_variant is false, so not adding the default
> universal variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! poppler-data 0.4.7_0 >= poppler-data
> 0.4.7_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean gobject-introspection 1.42.0_0 exists in the ports tree
> :debug:clean gobject-introspection 1.42.0_0 is the latest installed
> :debug:clean gobject-introspection 1.42.0_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /gobject-introspection
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup active_variants 1.1 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/active_variants-1.1.tcl
> :debug:clean python27 is installed with the following variants:
> :debug:clean required: ucs4, forbidden:
> :debug:clean rejected, because required variant ucs4 is missing
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! gobject-introspection 1.42.0_0 >=
> gobject-introspection 1.42.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean py27-mako 1.0.0_0 exists in the ports tree
> :debug:clean py27-mako 1.0.0_0 is the latest installed
> :debug:clean py27-mako 1.0.0_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python
> /py-mako
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Re-registering default for build.cmd
> :debug:clean Re-registering default for destroot.cmd
> :debug:clean Re-registering default for destroot.destdir
> :debug:clean Sourcing PortGroup python 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! py27-mako 1.0.0_0 >= py27-mako 1.0.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean py27-setuptools 12.0.3_0 exists in the ports tree
> :debug:clean py27-setuptools 12.0.3_0 is the latest installed
> :debug:clean py27-setuptools 12.0.3_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python
> /py-setuptools
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Re-registering default for build.cmd
> :debug:clean Re-registering default for destroot.cmd
> :debug:clean Re-registering default for destroot.destdir
> :debug:clean Sourcing PortGroup python 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! py27-setuptools 12.0.3_0 >=
> py27-setuptools 12.0.3_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean py27-beaker 1.6.4_0 exists in the ports tree
> :debug:clean py27-beaker 1.6.4_0 is the latest installed
> :debug:clean py27-beaker 1.6.4_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python
> /py-beaker
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Re-registering default for build.cmd
> :debug:clean Re-registering default for destroot.cmd
> :debug:clean Re-registering default for destroot.destdir
> :debug:clean Sourcing PortGroup python 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! py27-beaker 1.6.4_0 >= py27-beaker
> 1.6.4_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean py27-markupsafe 0.23_0 exists in the ports tree
> :debug:clean py27-markupsafe 0.23_0 is the latest installed
> :debug:clean py27-markupsafe 0.23_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python
> /py-markupsafe
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Re-registering default for build.cmd
> :debug:clean Re-registering default for destroot.cmd
> :debug:clean Re-registering default for destroot.destdir
> :debug:clean Sourcing PortGroup python 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! py27-markupsafe 0.23_0 >=
> py27-markupsafe 0.23_0
> :debug:clean epoch: in tree: 1 installed: 1
> :debug:clean pango 1.36.8_1 exists in the ports tree
> :debug:clean pango 1.36.8_1 +quartz+x11 is the latest installed
> :debug:clean pango 1.36.8_1 +quartz+x11 is active
> :debug:clean Merging existing variants '+quartz+x11' into variants
> :debug:clean new fully merged portvariants: x11 + quartz +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup active_variants 1.1 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/active_variants-1.1.tcl
> :debug:clean Sourcing PortGroup gobject_introspection 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/gobject_introspection-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean adding the default universal variant
> :debug:clean Executing variant quartz provides quartz
> :debug:clean Executing variant x11 provides x11
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! pango 1.36.8_1 >= pango 1.36.8_1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean harfbuzz 0.9.38_0 exists in the ports tree
> :debug:clean harfbuzz 0.9.38_0 is the latest installed
> :debug:clean harfbuzz 0.9.38_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/harfbuzz
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! harfbuzz 0.9.38_0 >= harfbuzz 0.9.38_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean graphite2 1.2.4_0 exists in the ports tree
> :debug:clean graphite2 1.2.4_0 is the latest installed
> :debug:clean graphite2 1.2.4_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/graphite2
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup cmake 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! graphite2 1.2.4_0 >= graphite2 1.2.4_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean Xft2 2.3.2_0 exists in the ports tree
> :debug:clean Xft2 2.3.2_0 is the latest installed
> :debug:clean Xft2 2.3.2_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants:
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean No need to upgrade! Xft2 2.3.2_0 >= Xft2 2.3.2_0
> :msg:clean ---> Computing dependencies for graphviz:info:clean
> .:debug:clean Checking for conflicts against graphviz
> :debug:clean Searching for dependency: graphviz-devel
> :debug:clean Didn't find receipt, going to depspec regex for: graphviz-
> devel
> :debug:clean Searching for dependency: pkgconfig
> :debug:clean Found Dependency: receipt exists for pkgconfig
> :debug:clean Searching for dependency: autoconf
> :debug:clean Found Dependency: receipt exists for autoconf
> :debug:clean Searching for dependency: automake
> :debug:clean Found Dependency: receipt exists for automake
> :debug:clean Searching for dependency: libtool
> :debug:clean Found Dependency: receipt exists for libtool
> :debug:clean Searching for dependency: jpeg
> :debug:clean Found Dependency: receipt exists for jpeg
> :debug:clean Searching for dependency: libpng
> :debug:clean Found Dependency: receipt exists for libpng
> :debug:clean Searching for dependency: webp
> :debug:clean Found Dependency: receipt exists for webp
> :debug:clean Searching for dependency: fontconfig
> :debug:clean Found Dependency: receipt exists for fontconfig
> :debug:clean Searching for dependency: freetype
> :debug:clean Found Dependency: receipt exists for freetype
> :debug:clean Searching for dependency: expat
> :debug:clean Found Dependency: receipt exists for expat
> :debug:clean Searching for dependency: gd2
> :debug:clean Found Dependency: receipt exists for gd2
> :debug:clean Searching for dependency: gts
> :debug:clean Didn't find receipt, going to depspec regex for: gts
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/gts
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Searching for dependency: zlib
> :debug:clean Found Dependency: receipt exists for zlib
> :debug:clean Searching for dependency: gettext
> :debug:clean Found Dependency: receipt exists for gettext
> :debug:clean Searching for dependency: poppler
> :debug:clean Found Dependency: receipt exists for poppler
> :debug:clean Searching for dependency: pango
> :debug:clean Found Dependency: receipt exists for pango
> :debug:clean Searching for dependency: libLASi
> :debug:clean Didn't find receipt, going to depspec regex for: libLASi
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/libLASi
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup cmake 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Searching for dependency: xorg-libXaw
> :debug:clean Didn't find receipt, going to depspec regex for: xorg-libXaw
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXaw
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Searching for dependency: urw-fonts
> :debug:clean Didn't find receipt, going to depspec regex for: urw-fonts
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /urw-fonts
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean universal_variant is false, so not adding the default
> universal variant
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :info:clean .:debug:clean gts has no conflicts
> :debug:clean Searching for dependency: glib2
> :debug:clean Found Dependency: receipt exists for glib2
> :debug:clean Searching for dependency: netpbm
> :debug:clean Didn't find receipt, going to depspec regex for: netpbm
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/netpbm
> :debug:clean OS darwin/14.1.0 (Mac OS X 10.10) arch i386
> :debug:clean Sourcing PortGroup conflicts_build 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Executing variant x11 provides x11
> :debug:clean Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:clean Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:clean Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :info:clean .:debug:clean netpbm has no conflicts
> :debug:clean Searching for dependency: jasper
> :debug:clean Found Dependency: receipt exists for jasper
> :debug:clean Searching for dependency: jbigkit
> :debug:clean Found Dependency: receipt exists for jbigkit
> :debug:clean Searching for dependency: libxml2
> :debug:clean Found Dependency: receipt exists for libxml2
> :debug:clean Searching for dependency: tiff
> :debug:clean Found Dependency: receipt exists for tiff
> :debug:clean Searching for dependency: xorg-libX11
> :debug:clean Found Dependency: receipt exists for xorg-libX11
> :info:clean .:debug:clean libLASi has no conflicts
> :info:clean .:debug:clean xorg-libXaw has no conflicts
> :debug:clean Searching for dependency: xorg-libsm
> :debug:clean Found Dependency: receipt exists for xorg-libsm
> :debug:clean Searching for dependency: xorg-libXext
> :debug:clean Found Dependency: receipt exists for xorg-libXext
> :debug:clean Searching for dependency: xorg-libXmu
> :debug:clean Found Dependency: receipt exists for xorg-libXmu
> :debug:clean Searching for dependency: xpm
> :debug:clean Found Dependency: receipt exists for xpm
> :debug:clean Searching for dependency: xorg-libXt
> :debug:clean Found Dependency: receipt exists for xorg-libXt
> :info:clean .:debug:clean urw-fonts has no conflicts
> :msg:clean
> :msg:clean ---> Dependencies to be installed: gts netpbm libLASi urw-
> fonts xorg-libXaw
> :debug:clean Starting logging for netpbm
> :debug:clean Starting logging for gts
> :debug:clean Starting logging for libLASi
> :debug:clean Starting logging for urw-fonts
> :debug:clean Starting logging for xorg-libXaw
> :debug:main Executing org.macports.main (graphviz)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 20
> :debug:main euid changed to: 502
> :debug:archivefetch archivefetch phase started at Fri Jan 30 08:38:43 CET
> 2015
> :msg:archivefetch ---> Fetching archive for graphviz
> :debug:archivefetch Executing org.macports.archivefetch (graphviz)
> :debug:archivefetch euid/egid changed to: 0/0
> :debug:archivefetch chowned /opt/local/var/macports/incoming to macports
> :debug:archivefetch euid/egid changed to: 502/20
> :info:archivefetch --->
> graphviz-2.38.0_0+pangocairo+x11.darwin_14.x86_64.tbz2 doesn't seem to
> exist in /opt/local/var/macports/incoming/verified
> :msg:archivefetch ---> Attempting to fetch
> graphviz-2.38.0_0+pangocairo+x11.darwin_14.x86_64.tbz2 from
> http://nue.de.packages.macports.org/macports/packages/graphviz
> :debug:archivefetch Fetching archive failed:: The requested URL returned
> error: 404 Not Found
> :msg:archivefetch ---> Attempting to fetch
> graphviz-2.38.0_0+pangocairo+x11.darwin_14.x86_64.tbz2 from
> http://lil.fr.packages.macports.org/graphviz
> :debug:archivefetch Fetching archive failed:: The requested URL returned
> error: 404 Not Found
> :msg:archivefetch ---> Attempting to fetch
> graphviz-2.38.0_0+pangocairo+x11.darwin_14.x86_64.tbz2 from
> http://mse.uk.packages.macports.org/sites/packages.macports.org/graphviz
> :debug:archivefetch Fetching archive failed:: The requested URL returned
> error: 404 Not Found
> :debug:archivefetch Privilege de-escalation not attempted as not running
> as root.
> :debug:fetch fetch phase started at Fri Jan 30 08:38:43 CET 2015
> :notice:fetch ---> Fetching distfiles for graphviz
> :debug:fetch Executing org.macports.fetch (graphviz)
> :debug:fetch Privilege de-escalation not attempted as not running as
> root.
> :debug:checksum checksum phase started at Fri Jan 30 08:38:43 CET 2015
> :notice:checksum ---> Verifying checksums for graphviz
> :debug:checksum Executing org.macports.checksum (graphviz)
> :info:checksum ---> Checksumming graphviz-2.38.0.tar.gz
> :debug:checksum Calculated (rmd160) is
> a80c2fa6b9955444b2103a99167d7020b23e4c4e
> :debug:checksum Correct (rmd160) checksum for graphviz-2.38.0.tar.gz
> :debug:checksum Calculated (sha256) is
> 81aa238d9d4a010afa73a9d2a704fc3221c731e1e06577c2ab3496bdef67859e
> :debug:checksum Correct (sha256) checksum for graphviz-2.38.0.tar.gz
> :debug:checksum Privilege de-escalation not attempted as not running as
> root.
> :debug:extract extract phase started at Fri Jan 30 08:38:44 CET 2015
> :notice:extract ---> Extracting graphviz
> :debug:extract Executing proc-pre-org.macports.extract-extract-0
> :debug:extract Executing org.macports.extract (graphviz)
> :info:extract ---> Extracting graphviz-2.38.0.tar.gz
> :debug:extract setting option extract.args to
> '/opt/local/var/macports/distfiles/graphviz/graphviz-2.38.0.tar.gz'
> :debug:extract Environment:
> CC_PRINT_OPTIONS='YES'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/.CC_PRINT_OPTIONS'
> CPATH='/opt/local/include'
> LIBRARY_PATH='/opt/local/lib'
> MACOSX_DEPLOYMENT_TARGET='10.10'
> :debug:extract Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work"
> && /usr/bin/gzip -dc
> '/opt/local/var/macports/distfiles/graphviz/graphviz-2.38.0.tar.gz' |
> /usr/bin/tar -xf -'
> :debug:extract Executing command line: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work"
> && /usr/bin/gzip -dc
> '/opt/local/var/macports/distfiles/graphviz/graphviz-2.38.0.tar.gz' |
> /usr/bin/tar -xf -
> :debug:extract euid/egid changed to: 0/0
> :debug:extract chowned
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work
> to macports
> :debug:extract euid/egid changed to: 502/20
> :debug:extract Privilege de-escalation not attempted as not running as
> root.
> :debug:patch patch phase started at Fri Jan 30 08:38:45 CET 2015
> :debug:patch Executing org.macports.patch (graphviz)
> :debug:patch Executing proc-post-org.macports.patch-patch-0
> :info:patch ---> Patching configure.ac: s:-lstdc++:-lc++:
> :debug:patch Executing reinplace: /usr/bin/sed s:-lstdc++:-lc++: <
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/configure.ac
> >@ file13 2>@stderr
> :debug:patch euid/egid changed to: 0/0
> :debug:patch chowned
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/configure.ac
> to macports
> :debug:patch euid/egid changed to: 502/20
> :debug:patch euid/egid changed to: 0/0
> :debug:patch setting attributes on
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/configure.ac
> :debug:patch euid/egid changed to: 502/20
> :info:patch ---> Patching Makefile.am: s:-lstdc++:-lc++:
> :debug:patch Executing reinplace: /usr/bin/sed s:-lstdc++:-lc++: <
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/cmd/dot/Makefile.am
> >@ file13 2>@stderr
> :debug:patch euid/egid changed to: 0/0
> :debug:patch chowned
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/cmd/dot/Makefile.am
> to macports
> :debug:patch euid/egid changed to: 502/20
> :debug:patch euid/egid changed to: 0/0
> :debug:patch setting attributes on
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/cmd/dot/Makefile.am
> :debug:patch euid/egid changed to: 502/20
> :info:patch ---> Patching Makefile.am: s:-lstdc++:-lc++:
> :debug:patch Executing reinplace: /usr/bin/sed s:-lstdc++:-lc++: <
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/cmd/mingle/Makefile.am
> >@ file13 2>@stderr
> :debug:patch euid/egid changed to: 0/0
> :debug:patch chowned
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/cmd/mingle/Makefile.am
> to macports
> :debug:patch euid/egid changed to: 502/20
> :debug:patch euid/egid changed to: 0/0
> :debug:patch setting attributes on
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/cmd/mingle/Makefile.am
> :debug:patch euid/egid changed to: 502/20
> :info:patch ---> Patching Makefile.am: s:-lstdc++:-lc++:
> :debug:patch Executing reinplace: /usr/bin/sed s:-lstdc++:-lc++: <
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/plugin/gdiplus/Makefile.am
> >@ file13 2>@stderr
> :debug:patch euid/egid changed to: 0/0
> :debug:patch chowned
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/plugin/gdiplus/Makefile.am
> to macports
> :debug:patch euid/egid changed to: 502/20
> :debug:patch euid/egid changed to: 0/0
> :debug:patch setting attributes on
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/plugin/gdiplus/Makefile.am
> :debug:patch euid/egid changed to: 502/20
> :debug:patch Privilege de-escalation not attempted as not running as
> root.
> :debug:configure configure phase started at Fri Jan 30 08:38:45 CET 2015
> :notice:configure ---> Configuring graphviz
> :debug:configure Using compiler 'Xcode Clang'
> :debug:configure Executing proc-pre-org.macports.configure-configure-0
> :debug:configure Executing org.macports.configure (graphviz)
> :debug:configure Environment:
> CC_PRINT_OPTIONS='YES'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/.CC_PRINT_OPTIONS'
> CPATH='/opt/local/include'
> LIBRARY_PATH='/opt/local/lib'
> MACOSX_DEPLOYMENT_TARGET='10.10'
> :debug:configure Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0"
> && autoreconf -fvi'
> :debug:configure Executing command line: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0"
> && autoreconf -fvi
> :info:configure autoreconf: Entering directory `.'
> :info:configure autoreconf: configure.ac: not using Gettext
> :info:configure autoreconf: running: aclocal --force -I m4
> :info:configure autoreconf: configure.ac: tracing
> :info:configure autoreconf: configure.ac: adding subdirectory libltdl to
> autoreconf
> :info:configure autoreconf: Entering directory `libltdl'
> :info:configure autoreconf: running: glibtoolize --copy --force --ltdl
> :info:configure glibtoolize: putting auxiliary files in
> AC_CONFIG_AUX_DIR, 'config'.
> :info:configure glibtoolize: copying file 'config/compile'
> :info:configure glibtoolize: copying file 'config/config.guess'
> :info:configure glibtoolize: copying file 'config/config.sub'
> :info:configure glibtoolize: copying file 'config/depcomp'
> :info:configure glibtoolize: copying file 'config/install-sh'
> :info:configure glibtoolize: copying file 'config/missing'
> :info:configure glibtoolize: copying file 'config/ltmain.sh'
> :info:configure glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS,
> 'm4'.
> :info:configure glibtoolize: copying file 'm4/libtool.m4'
> :info:configure glibtoolize: copying file 'm4/ltargz.m4'
> :info:configure glibtoolize: You should add the contents of
> 'm4/ltargz.m4' to 'aclocal.m4'.
> :info:configure glibtoolize: copying file 'm4/ltdl.m4'
> :info:configure glibtoolize: copying file 'm4/ltoptions.m4'
> :info:configure glibtoolize: copying file 'm4/ltsugar.m4'
> :info:configure glibtoolize: copying file 'm4/ltversion.m4'
> :info:configure glibtoolize: copying file 'm4/lt~obsolete.m4'
> :info:configure glibtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR,
> '.'.
> :info:configure glibtoolize: copying file './COPYING.LIB'
> :info:configure glibtoolize: creating file './Makefile.am'
> :info:configure glibtoolize: creating file './Makefile.in'
> :info:configure glibtoolize: copying file './README'
> :info:configure glibtoolize: creating file './configure.ac'
> :info:configure glibtoolize: creating file './aclocal.m4'
> :info:configure glibtoolize: copying file './config-h.in'
> :info:configure glibtoolize: creating file './configure'
> :info:configure glibtoolize: copying file './libltdl/lt__alloc.h'
> :info:configure glibtoolize: copying file './libltdl/lt__argz_.h'
> :info:configure glibtoolize: copying file './libltdl/lt__dirent.h'
> :info:configure glibtoolize: copying file './libltdl/lt__glibc.h'
> :info:configure glibtoolize: copying file './libltdl/lt__private.h'
> :info:configure glibtoolize: copying file './libltdl/lt__strl.h'
> :info:configure glibtoolize: copying file './libltdl/lt_dlloader.h'
> :info:configure glibtoolize: copying file './libltdl/lt_error.h'
> :info:configure glibtoolize: copying file './libltdl/lt_system.h'
> :info:configure glibtoolize: copying file './libltdl/slist.h'
> :info:configure glibtoolize: copying file './loaders/dld_link.c'
> :info:configure glibtoolize: copying file './loaders/dlopen.c'
> :info:configure glibtoolize: copying file './loaders/dyld.c'
> :info:configure glibtoolize: copying file './loaders/load_add_on.c'
> :info:configure glibtoolize: copying file './loaders/loadlibrary.c'
> :info:configure glibtoolize: copying file './loaders/preopen.c'
> :info:configure glibtoolize: copying file './loaders/shl_load.c'
> :info:configure glibtoolize: copying file './lt__alloc.c'
> :info:configure glibtoolize: copying file './lt__argz.c'
> :info:configure glibtoolize: copying file './lt__dirent.c'
> :info:configure glibtoolize: copying file './lt__strl.c'
> :info:configure glibtoolize: copying file './lt_dlloader.c'
> :info:configure glibtoolize: copying file './lt_error.c'
> :info:configure glibtoolize: copying file './ltdl.c'
> :info:configure glibtoolize: copying file './ltdl.h'
> :info:configure glibtoolize: copying file './slist.c'
> :info:configure glibtoolize: Remember to add 'LTDL_INIT' to configure.ac.
> :info:configure autoreconf: running: /opt/local/bin/autoconf --force
> :info:configure autoreconf: running: /opt/local/bin/autoheader --force
> :info:configure autoreconf: running: automake --add-missing --copy
> --force-missing
> :info:configure autoreconf: Leaving directory `libltdl'
> :info:configure autoreconf: running: glibtoolize --copy --force --ltdl
> --ltdl
> :info:configure glibtoolize: putting auxiliary files in
> AC_CONFIG_AUX_DIR, 'config'.
> :info:configure glibtoolize: copying file 'config/compile'
> :info:configure glibtoolize: copying file 'config/config.guess'
> :info:configure glibtoolize: copying file 'config/config.sub'
> :info:configure glibtoolize: copying file 'config/depcomp'
> :info:configure glibtoolize: copying file 'config/install-sh'
> :info:configure glibtoolize: copying file 'config/missing'
> :info:configure glibtoolize: copying file 'config/ltmain.sh'
> :info:configure glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS,
> 'm4'.
> :info:configure glibtoolize: copying file 'm4/libtool.m4'
> :info:configure glibtoolize: copying file 'm4/ltargz.m4'
> :info:configure glibtoolize: You should add the contents of
> 'm4/ltargz.m4' to 'aclocal.m4'.
> :info:configure glibtoolize: copying file 'm4/ltdl.m4'
> :info:configure glibtoolize: copying file 'm4/ltoptions.m4'
> :info:configure glibtoolize: copying file 'm4/ltsugar.m4'
> :info:configure glibtoolize: copying file 'm4/ltversion.m4'
> :info:configure glibtoolize: copying file 'm4/lt~obsolete.m4'
> :info:configure glibtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR,
> 'libltdl'.
> :info:configure glibtoolize: copying file 'libltdl/COPYING.LIB'
> :info:configure glibtoolize: creating file 'libltdl/Makefile.am'
> :info:configure glibtoolize: creating file 'libltdl/Makefile.in'
> :info:configure glibtoolize: copying file 'libltdl/README'
> :info:configure glibtoolize: creating file 'libltdl/configure.ac'
> :info:configure glibtoolize: copying file 'libltdl/aclocal.m4'
> :info:configure glibtoolize: copying file 'libltdl/config-h.in'
> :info:configure glibtoolize: creating file 'libltdl/configure'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/lt__alloc.h'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/lt__argz_.h'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/lt__dirent.h'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/lt__glibc.h'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/lt__private.h'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/lt__strl.h'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/lt_dlloader.h'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/lt_error.h'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/lt_system.h'
> :info:configure glibtoolize: copying file 'libltdl/libltdl/slist.h'
> :info:configure glibtoolize: copying file 'libltdl/loaders/dld_link.c'
> :info:configure glibtoolize: copying file 'libltdl/loaders/dlopen.c'
> :info:configure glibtoolize: copying file 'libltdl/loaders/dyld.c'
> :info:configure glibtoolize: copying file 'libltdl/loaders/load_add_on.c'
> :info:configure glibtoolize: copying file 'libltdl/loaders/loadlibrary.c'
> :info:configure glibtoolize: copying file 'libltdl/loaders/preopen.c'
> :info:configure glibtoolize: copying file 'libltdl/loaders/shl_load.c'
> :info:configure glibtoolize: copying file 'libltdl/lt__alloc.c'
> :info:configure glibtoolize: copying file 'libltdl/lt__argz.c'
> :info:configure glibtoolize: copying file 'libltdl/lt__dirent.c'
> :info:configure glibtoolize: copying file 'libltdl/lt__strl.c'
> :info:configure glibtoolize: copying file 'libltdl/lt_dlloader.c'
> :info:configure glibtoolize: copying file 'libltdl/lt_error.c'
> :info:configure glibtoolize: copying file 'libltdl/ltdl.c'
> :info:configure glibtoolize: copying file 'libltdl/ltdl.h'
> :info:configure glibtoolize: copying file 'libltdl/slist.c'
> :info:configure cmd/dotty/Makefile.am:23: warning: source file
> 'mswin32/dotty.c' is in a subdirectory,
> :info:configure cmd/dotty/Makefile.am:23: but option 'subdir-objects' is
> disabled
> :info:configure automake: warning: possible forward-incompatibility.
> :info:configure automake: At least a source file is in a subdirectory,
> but the 'subdir-objects'
> :info:configure automake: automake option hasn't been enabled. For now,
> the corresponding output
> :info:configure automake: object file(s) will be placed in the top-level
> directory. However,
> :info:configure automake: this behaviour will change in future Automake
> versions: they will
> :info:configure automake: unconditionally cause object files to be placed
> in the same subdirectory
> :info:configure automake: of the corresponding sources.
> :info:configure automake: You are advised to start using 'subdir-objects'
> option throughout your
> :info:configure automake: project, to avoid future incompatibilities.
> :info:configure cmd/lneato/Makefile.am:21: warning: source file
> '${top_srcdir}/cmd/dotty/mswin32/dotty.c' is in a subdirectory,
> :info:configure cmd/lneato/Makefile.am:21: but option 'subdir-objects' is
> disabled
> :info:configure cmd/smyrna/Makefile.am:53: warning: source file
> 'gui/appmouse.c' is in a subdirectory,
> :info:configure cmd/smyrna/Makefile.am:53: but option 'subdir-objects' is
> disabled
> :info:configure cmd/smyrna/Makefile.am:53: warning: source file
> 'gui/callbacks.c' is in a subdirectory,
> :info:configure cmd/smyrna/Makefile.am:53: but option 'subdir-objects' is
> disabled
> :info:configure cmd/smyrna/Makefile.am:53: warning: source file
> 'gui/datalistcallbacks.c' is in a subdirectory,
> :info:configure cmd/smyrna/Makefile.am:53: but option 'subdir-objects' is
> disabled
> :info:configure cmd/smyrna/Makefile.am:53: warning: source file
> 'gui/frmobjectui.c' is in a subdirectory,
> :info:configure cmd/smyrna/Makefile.am:53: but option 'subdir-objects' is
> disabled
> :info:configure cmd/smyrna/Makefile.am:53: warning: source file
> 'gui/glcompui.c' is in a subdirectory,
> :info:configure cmd/smyrna/Makefile.am:53: but option 'subdir-objects' is
> disabled
> :info:configure cmd/smyrna/Makefile.am:53: warning: source file
> 'gui/gui.c' is in a subdirectory,
> :info:configure cmd/smyrna/Makefile.am:53: but option 'subdir-objects' is
> disabled
> :info:configure cmd/smyrna/Makefile.am:53: warning: source file
> 'gui/menucallbacks.c' is in a subdirectory,
> :info:configure cmd/smyrna/Makefile.am:53: but option 'subdir-objects' is
> disabled
> :info:configure cmd/smyrna/Makefile.am:53: warning: source file
> 'gui/toolboxcallbacks.c' is in a subdirectory,
> :info:configure cmd/smyrna/Makefile.am:53: but option 'subdir-objects' is
> disabled
> :info:configure cmd/smyrna/Makefile.am:53: warning: source file
> 'gui/topviewsettings.c' is in a subdirectory,
> :info:configure cmd/smyrna/Makefile.am:53: but option 'subdir-objects' is
> disabled
> :info:configure lib/vpsc/Makefile.am:14: warning: source file
> 'pairingheap/PairingHeap.cpp' is in a subdirectory,
> :info:configure lib/vpsc/Makefile.am:14: but option 'subdir-objects' is
> disabled
> :info:configure tclpkg/tcldot/Makefile.am:41: warning: source file
> '$(top_srcdir)/tclpkg/gdtclft/gdtclft.c' is in a subdirectory,
> :info:configure tclpkg/tcldot/Makefile.am:41: but option 'subdir-objects'
> is disabled
> :info:configure autoreconf: Leaving directory `.'
> :debug:configure Environment:
> CC='/usr/bin/clang'
> CC_PRINT_OPTIONS='YES'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/.CC_PRINT_OPTIONS'
> CFLAGS='-pipe -Os -arch x86_64'
> CPATH='/opt/local/include'
> CPPFLAGS='-I/opt/local/include'
> CXX='/usr/bin/clang++'
> CXXFLAGS='-pipe -Os -arch x86_64 -stdlib=libc++'
> F77FLAGS='-m64'
> F90FLAGS='-pipe -Os -m64'
> FCFLAGS='-pipe -Os -m64'
> FFLAGS='-pipe -Os'
> INSTALL='/usr/bin/install -c'
> LDFLAGS='-L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64'
> LIBRARY_PATH='/opt/local/lib'
> MACOSX_DEPLOYMENT_TARGET='10.10'
> OBJC='/usr/bin/clang'
> OBJCFLAGS='-pipe -Os -arch x86_64'
> OBJCXX='/usr/bin/clang++'
> OBJCXXFLAGS='-pipe -Os -arch x86_64 -stdlib=libc++'
> :debug:configure Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0"
> && ./configure --prefix=/opt/local --disable-silent-rules --with-codegens
> --without-devil --without-smyrna --with-digcola --with-ipsepcola
> --without-rsvg --with-pangocairo --with-lasi --with-webp --without-glitz
> --with-freetype2 --with-fontconfig --without-gdk-pixbuf --without-
> ghostscript --without-gtk --without-gtkgl --without-gtkglext --with-gts
> --without-glade --without-gnomeui --without-ming --without-qt --with-
> quartz --disable-swig --disable-sharp --disable-guile --disable-io
> --disable-java --disable-lua --disable-ocaml --disable-perl --disable-php
> --disable-python --disable-python23 --disable-python24 --disable-python25
> --disable-r --disable-ruby --disable-tcl'
> :debug:configure Executing command line: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0"
> && ./configure --prefix=/opt/local --disable-silent-rules --with-codegens
> --without-devil --without-smyrna --with-digcola --with-ipsepcola
> --without-rsvg --with-pangocairo --with-lasi --with-webp --without-glitz
> --with-freetype2 --with-fontconfig --without-gdk-pixbuf --without-
> ghostscript --without-gtk --without-gtkgl --without-gtkglext --with-gts
> --without-glade --without-gnomeui --without-ming --without-qt --with-
> quartz --disable-swig --disable-sharp --disable-guile --disable-io
> --disable-java --disable-lua --disable-ocaml --disable-perl --disable-php
> --disable-python --disable-python23 --disable-python24 --disable-python25
> --disable-r --disable-ruby --disable-tcl
> :info:configure checking build system type... x86_64-apple-darwin14.1.0
> :info:configure checking host system type... x86_64-apple-darwin14.1.0
> :info:configure checking for a BSD-compatible install... /usr/bin/install
> -c
> :info:configure checking whether build environment is sane... yes
> :info:configure checking for a thread-safe mkdir -p... config/install-sh
> -c -d
> :info:configure checking for gawk... gawk
> :info:configure checking whether make sets $(MAKE)... yes
> :info:configure checking whether make supports nested variables... yes
> :info:configure checking whether make supports nested variables...
> (cached) yes
> :info:configure checking for style of include used by make... GNU
> :info:configure checking for gcc... /usr/bin/clang
> :info:configure checking whether the C compiler works... yes
> :info:configure checking for C compiler default output file name... a.out
> :info:configure checking for suffix of executables...
> :info:configure checking whether we are cross compiling... no
> :info:configure checking for suffix of object files... o
> :info:configure checking whether we are using the GNU C compiler... yes
> :info:configure checking whether /usr/bin/clang accepts -g... yes
> :info:configure checking for /usr/bin/clang option to accept ISO C89...
> none needed
> :info:configure checking whether /usr/bin/clang understands -c and -o
> together... yes
> :info:configure checking dependency style of /usr/bin/clang... gcc3
> :info:configure checking for library containing strerror... none required
> :info:configure checking for flex... flex
> :info:configure checking lex output file root... lex.yy
> :info:configure checking lex library... -lfl
> :info:configure checking whether yytext is a pointer... yes
> :info:configure checking for bison... bison -y
> :info:configure checking for gawk... (cached) gawk
> :info:configure checking whether ln -s works... yes
> :info:configure checking how to print strings... printf
> :info:configure checking for a sed that does not truncate output...
> /usr/bin/sed
> :info:configure checking for grep that handles long lines and -e...
> /usr/bin/grep
> :info:configure checking for egrep... /usr/bin/grep -E
> :info:configure checking for fgrep... /usr/bin/grep -F
> :info:configure checking for ld used by /usr/bin/clang...
> /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
> :info:configure checking if the linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> is GNU ld... no
> :info:configure checking for BSD- or MS-compatible name lister (nm)...
> /opt/local/bin/nm
> :info:configure checking the name lister (/opt/local/bin/nm) interface...
> BSD nm
> :info:configure checking the maximum length of command line arguments...
> 196608
> :info:configure checking how to convert x86_64-apple-darwin14.1.0 file
> names to x86_64-apple-darwin14.1.0 format... func_convert_file_noop
> :info:configure checking how to convert x86_64-apple-darwin14.1.0 file
> names to toolchain format... func_convert_file_noop
> :info:configure checking for
> /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
> option to reload object files... -r
> :info:configure checking for objdump... no
> :info:configure checking how to recognize dependent libraries... pass_all
> :info:configure checking for dlltool... no
> :info:configure checking how to associate runtime and link libraries...
> printf %s\n
> :info:configure checking for ar... ar
> :info:configure checking for archiver @FILE support... no
> :info:configure checking for strip... strip
> :info:configure checking for ranlib... ranlib
> :info:configure checking command to parse /opt/local/bin/nm output from
> /usr/bin/clang object... ok
> :info:configure checking for sysroot... no
> :info:configure checking for a working dd... /bin/dd
> :info:configure checking how to truncate binary pipes... /bin/dd bs=4096
> count=1
> :info:configure checking for mt... no
> :info:configure checking if : is a manifest tool... no
> :info:configure checking for dsymutil... dsymutil
> :info:configure checking for nmedit... nmedit
> :info:configure checking for lipo... lipo
> :info:configure checking for otool... otool
> :info:configure checking for otool64... no
> :info:configure checking for -single_module linker flag... yes
> :info:configure checking for -exported_symbols_list linker flag... yes
> :info:configure checking for -force_load linker flag... yes
> :info:configure checking how to run the C preprocessor... /usr/bin/clang
> -E
> :info:configure checking for ANSI C header files... yes
> :info:configure checking for sys/types.h... yes
> :info:configure checking for sys/stat.h... yes
> :info:configure checking for stdlib.h... yes
> :info:configure checking for string.h... yes
> :info:configure checking for memory.h... yes
> :info:configure checking for strings.h... yes
> :info:configure checking for inttypes.h... yes
> :info:configure checking for stdint.h... yes
> :info:configure checking for unistd.h... yes
> :info:configure checking for dlfcn.h... yes
> :info:configure checking for objdir... .libs
> :info:configure checking if /usr/bin/clang supports -fno-rtti -fno-
> exceptions... yes
> :info:configure checking for /usr/bin/clang option to produce PIC...
> -fno-common -DPIC
> :info:configure checking if /usr/bin/clang PIC flag -fno-common -DPIC
> works... yes
> :info:configure checking if /usr/bin/clang static flag -static works...
> no
> :info:configure checking if /usr/bin/clang supports -c -o file.o... yes
> :info:configure checking if /usr/bin/clang supports -c -o file.o...
> (cached) yes
> :info:configure checking whether the /usr/bin/clang linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> supports shared libraries... yes
> :info:configure checking dynamic linker characteristics... darwin14.1.0
> dyld
> :info:configure checking how to hardcode library paths into programs...
> immediate
> :info:configure checking whether stripping libraries is possible... yes
> :info:configure checking if libtool supports shared libraries... yes
> :info:configure checking whether to build shared libraries... yes
> :info:configure checking whether to build static libraries... no
> :info:configure checking for gsed... /usr/bin/sed
> :info:configure checking for gsort... no
> :info:configure checking for sort... sort
> :info:configure checking for egrep... /usr/bin/grep -E
> :info:configure checking for groff... groff
> :info:configure checking for ps2pdf... ps2pdf
> :info:configure checking for pstopdf... (cached) ps2pdf
> :info:configure checking for pkg-config... /opt/local/bin/pkg-config
> :info:configure checking pkg-config is at least version 0.9.0... yes
> :info:configure checking for tclsh8.6... no
> :info:configure checking for tclsh8.5... /usr/bin/tclsh8.5
> :info:configure checking whether we are using the GNU C++ compiler... yes
> :info:configure checking whether /usr/bin/clang++ accepts -g... yes
> :info:configure checking dependency style of /usr/bin/clang++... gcc3
> :info:configure checking how to run the C++ preprocessor...
> /usr/bin/clang++ -E
> :info:configure checking for ld used by /usr/bin/clang++...
> /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
> :info:configure checking if the linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> is GNU ld... no
> :info:configure checking whether the /usr/bin/clang++ linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> supports shared libraries... yes
> :info:configure checking for /usr/bin/clang++ option to produce PIC...
> -fno-common -DPIC
> :info:configure checking if /usr/bin/clang++ PIC flag -fno-common -DPIC
> works... yes
> :info:configure checking if /usr/bin/clang++ static flag -static works...
> no
> :info:configure checking if /usr/bin/clang++ supports -c -o file.o... yes
> :info:configure checking if /usr/bin/clang++ supports -c -o file.o...
> (cached) yes
> :info:configure checking whether the /usr/bin/clang++ linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> supports shared libraries... yes
> :info:configure checking dynamic linker characteristics... darwin14.1.0
> dyld
> :info:configure checking how to hardcode library paths into programs...
> immediate
> :info:configure checking whether we are using the GNU Objective C
> compiler... yes
> :info:configure checking whether /usr/bin/clang accepts -g... yes
> :info:configure checking dependency style of /usr/bin/clang... gcc3
> :info:configure checking for inline... inline
> :info:configure checking for windres... no
> :info:configure checking for an ANSI C-conforming const... yes
> :info:configure checking for mode_t... yes
> :info:configure checking for pid_t... yes
> :info:configure checking for size_t... yes
> :info:configure checking for ssize_t... yes
> :info:configure checking for uid_t in sys/types.h... yes
> :info:configure checking stdarg.h usability... yes
> :info:configure checking stdarg.h presence... yes
> :info:configure checking for stdarg.h... yes
> :info:configure checking stddef.h usability... yes
> :info:configure checking stddef.h presence... yes
> :info:configure checking for stddef.h... yes
> :info:configure checking for stddef.h... (cached) yes
> :info:configure checking for stdlib.h... (cached) yes
> :info:configure checking for stdint.h... (cached) yes
> :info:configure checking malloc.h usability... no
> :info:configure checking malloc.h presence... no
> :info:configure checking for malloc.h... no
> :info:configure checking fcntl.h usability... yes
> :info:configure checking fcntl.h presence... yes
> :info:configure checking for fcntl.h... yes
> :info:configure checking search.h usability... yes
> :info:configure checking search.h presence... yes
> :info:configure checking for search.h... yes
> :info:configure checking getopt.h usability... yes
> :info:configure checking getopt.h presence... yes
> :info:configure checking for getopt.h... yes
> :info:configure checking pthread.h usability... yes
> :info:configure checking pthread.h presence... yes
> :info:configure checking for pthread.h... yes
> :info:configure checking values.h usability... no
> :info:configure checking values.h presence... no
> :info:configure checking for values.h... no
> :info:configure checking float.h usability... yes
> :info:configure checking float.h presence... yes
> :info:configure checking for float.h... yes
> :info:configure checking limits.h usability... yes
> :info:configure checking limits.h presence... yes
> :info:configure checking for limits.h... yes
> :info:configure checking termios.h usability... yes
> :info:configure checking termios.h presence... yes
> :info:configure checking for termios.h... yes
> :info:configure checking errno.h usability... yes
> :info:configure checking errno.h presence... yes
> :info:configure checking for errno.h... yes
> :info:configure checking time.h usability... yes
> :info:configure checking time.h presence... yes
> :info:configure checking for time.h... yes
> :info:configure checking for unistd.h... (cached) yes
> :info:configure checking fenv.h usability... yes
> :info:configure checking fenv.h presence... yes
> :info:configure checking for fenv.h... yes
> :info:configure checking for string.h... (cached) yes
> :info:configure checking for strings.h... (cached) yes
> :info:configure checking for inttypes.h... (cached) yes
> :info:configure checking setjmp.h usability... yes
> :info:configure checking setjmp.h presence... yes
> :info:configure checking for setjmp.h... yes
> :info:configure checking sys/time.h usability... yes
> :info:configure checking sys/time.h presence... yes
> :info:configure checking for sys/time.h... yes
> :info:configure checking sys/times.h usability... yes
> :info:configure checking sys/times.h presence... yes
> :info:configure checking for sys/times.h... yes
> :info:configure checking for sys/types.h... (cached) yes
> :info:configure checking sys/select.h usability... yes
> :info:configure checking sys/select.h presence... yes
> :info:configure checking for sys/select.h... yes
> :info:configure checking fpu_control.h usability... no
> :info:configure checking fpu_control.h presence... no
> :info:configure checking for fpu_control.h... no
> :info:configure checking sys/fpu.h usability... no
> :info:configure checking sys/fpu.h presence... no
> :info:configure checking for sys/fpu.h... no
> :info:configure checking sys/socket.h usability... yes
> :info:configure checking sys/socket.h presence... yes
> :info:configure checking for sys/socket.h... yes
> :info:configure checking for sys/stat.h... (cached) yes
> :info:configure checking sys/mman.h usability... yes
> :info:configure checking sys/mman.h presence... yes
> :info:configure checking for sys/mman.h... yes
> :info:configure checking sys/ioctl.h usability... yes
> :info:configure checking sys/ioctl.h presence... yes
> :info:configure checking for sys/ioctl.h... yes
> :info:configure checking sys/inotify.h usability... no
> :info:configure checking sys/inotify.h presence... no
> :info:configure checking for sys/inotify.h... no
> :info:configure checking langinfo.h usability... yes
> :info:configure checking langinfo.h presence... yes
> :info:configure checking for langinfo.h... yes
> :info:configure checking libintl.h usability... yes
> :info:configure checking libintl.h presence... yes
> :info:configure checking for libintl.h... yes
> :info:configure checking crt_externs.h usability... yes
> :info:configure checking crt_externs.h presence... yes
> :info:configure checking for crt_externs.h... yes
> :info:configure checking whether time.h and sys/time.h may both be
> included... yes
> :info:configure checking for dirent.h that defines DIR... yes
> :info:configure checking for library containing opendir... none required
> :info:configure checking for stdbool.h that conforms to C99... yes
> :info:configure checking for _Bool... yes
> :info:configure checking for socklen_t... yes
> :info:configure checking for bool... no
> :info:configure checking for struct dioattr... no
> :info:configure checking for main in -lm... yes
> :info:configure checking for feenableexcept... no
> :info:configure checking for fesetenv... yes
> :info:configure checking for log2... yes
> :info:configure checking for sincos... no
> :info:configure checking libgen.h usability... yes
> :info:configure checking libgen.h presence... yes
> :info:configure checking for libgen.h... yes
> :info:configure checking for basename in -lgen... no
> :info:configure checking for working alloca.h... yes
> :info:configure checking for alloca... yes
> :info:configure checking for lrand48... yes
> :info:configure checking for drand48... yes
> :info:configure checking for srand48... yes
> :info:configure checking for setmode... yes
> :info:configure checking for setenv... yes
> :info:configure checking for getenv... yes
> :info:configure checking for __freadable... no
> :info:configure checking for _sysconf... no
> :info:configure checking for getrusage... yes
> :info:configure checking for strerror... yes
> :info:configure checking for cbrt... yes
> :info:configure checking for lsqrt... no
> :info:configure checking for vsnprintf... yes
> :info:configure checking for strtoul... yes
> :info:configure checking for strtoll... yes
> :info:configure checking for strtoull... yes
> :info:configure checking for uname... yes
> :info:configure checking for memset... yes
> :info:configure checking for nl_langinfo... yes
> :info:configure checking for pow... yes
> :info:configure checking for sqrt... yes
> :info:configure checking for strchr... yes
> :info:configure checking for strdup... yes
> :info:configure checking for strerror... (cached) yes
> :info:configure checking for strstr... yes
> :info:configure checking for _NSGetEnviron... yes
> :info:configure checking for strcasecmp... yes
> :info:configure checking for strncasecmp... yes
> :info:configure checking for strcasestr... yes
> :info:configure checking what extension is used for runtime loadable
> modules... .so
> :info:configure checking what variable specifies run-time module search
> path... DYLD_LIBRARY_PATH
> :info:configure checking for the default library search path...
> /usr/local/lib /lib /usr/lib
> :info:configure checking for library containing dlopen... none required
> :info:configure checking for dlerror... yes
> :info:configure checking for shl_load... no
> :info:configure checking for shl_load in -ldld... no
> :info:configure checking for dld_link in -ldld... no
> :info:configure checking for _ prefix in compiled symbols... yes
> :info:configure checking whether we have to add an underscore for
> dlsym... no
> :info:configure checking whether deplibs are loaded by dlopen... yes
> :info:configure checking for argz.h... no
> :info:configure checking for error_t... no
> :info:configure checking for argz_add... no
> :info:configure checking for argz_append... no
> :info:configure checking for argz_count... no
> :info:configure checking for argz_create_sep... no
> :info:configure checking for argz_insert... no
> :info:configure checking for argz_next... no
> :info:configure checking for argz_stringify... no
> :info:configure checking whether libtool supports -dlopen/-dlpreopen...
> yes
> :info:configure checking for ltdl.h... yes
> :info:configure checking whether lt_dlinterface_register is declared...
> yes
> :info:configure checking for lt_dladvise_preload in -lltdl... yes
> :info:configure checking where to find libltdl headers...
> :info:configure checking where to find libltdl library... -lltdl
> :info:configure checking for unistd.h... (cached) yes
> :info:configure checking for dl.h... no
> :info:configure checking for sys/dl.h... no
> :info:configure checking for dld.h... no
> :info:configure checking for mach-o/dyld.h... yes
> :info:configure checking for dirent.h... yes
> :info:configure checking for closedir... yes
> :info:configure checking for opendir... yes
> :info:configure checking for readdir... yes
> :info:configure checking for strlcat... yes
> :info:configure checking for strlcpy... yes
> :info:configure checking for lt_dladvise_init in -lltdl... yes
> :info:configure checking for X... libraries , headers
> :info:configure checking for gethostbyname... yes
> :info:configure checking for connect... yes
> :info:configure checking for remove... yes
> :info:configure checking for shmat... yes
> :info:configure checking for IceConnectionNumber in -lICE... yes
> :info:configure checking for XRENDER... yes
> :info:configure configure: WARNING: No Tcl. The Tk packages will not be
> built either
> :info:configure checking for connect... (cached) yes
> :info:configure checking for gethostbyname... (cached) yes
> :info:configure checking for expat-config... no
> :info:configure checking expat.h usability... yes
> :info:configure checking expat.h presence... yes
> :info:configure checking for expat.h... yes
> :info:configure checking for main in -lexpat... yes
> :info:configure checking for main in -lXpm... yes
> :info:configure checking X11/Intrinsic.h usability... yes
> :info:configure checking X11/Intrinsic.h presence... yes
> :info:configure checking for X11/Intrinsic.h... yes
> :info:configure checking for X11/Xaw/Text.h... yes
> :info:configure checking for main in -lXaw... yes
> :info:configure checking zlib.h usability... yes
> :info:configure checking zlib.h presence... yes
> :info:configure checking for zlib.h... yes
> :info:configure checking for main in -lz... yes
> :info:configure checking for deflateBound... yes
> :info:configure checking for WEBP... yes
> :info:configure checking for POPPLER... yes
> :info:configure checking for PANGOCAIRO... yes
> :info:configure checking for PANGOFT2... yes
> :info:configure checking for pango_fc_font_lock_face... yes
> :info:configure checking for pango_fc_font_unlock_face... yes
> :info:configure checking for pango_font_map_create_context... yes
> :info:configure checking for LASI... yes
> :info:configure checking for FREETYPE2... yes
> :info:configure checking for FONTCONFIG... yes
> :info:configure checking for GDK... yes
> :info:configure checking for g_object_unref... yes
> :info:configure checking for g_type_init... yes
> :info:configure checking for GTS... yes
> :info:configure checking for ANN... no
> :info:configure checking for gdlib-config... /opt/local/bin/gdlib-config
> :info:configure ./configure: line 28131: test: @GDLIB_MAJOR@: integer
> expression expected
> :info:configure ./configure: line 28134: test: @GDLIB_MAJOR@: integer
> expression expected
> :info:configure checking gd.h usability... yes
> :info:configure checking gd.h presence... yes
> :info:configure checking for gd.h... yes
> :info:configure checking for main in -lgd... yes
> :info:configure checking GL/glut.h usability... no
> :info:configure checking GL/glut.h presence... no
> :info:configure checking for GL/glut.h... no
> :info:configure configure: WARNING: Optional glut library not available -
> no GL/glut.h
> :info:configure checking if FILE struct contains _cnt... no
> :info:configure checking if FILE struct contains _r... yes
> :info:configure checking if FILE struct contains _next... no
> :info:configure checking if FILE struct contains _IO_read_end... no
> :info:configure checking if errno externs are declared... yes
> :info:configure checking if getopt externs are declared... yes
> :info:configure checking if intptr_t is declared... yes
> :info:configure checking if assert needs __eprintf... no
> :info:configure checking size of long long... 8
> :info:configure checking size of int... 4
> :info:configure checking that generated files are newer than configure...
> done
> :info:configure configure: creating ./config.status
> :info:configure config.status: creating Makefile
> :info:configure config.status: creating debian/changelog
> :info:configure config.status: creating doc/Makefile
> :info:configure config.status: creating doc/info/Makefile
> :info:configure config.status: creating doc/schema/Makefile
> :info:configure config.status: creating contrib/Makefile
> :info:configure config.status: creating contrib/prune/Makefile
> :info:configure config.status: creating contrib/diffimg/Makefile
> :info:configure config.status: creating graphs/Makefile
> :info:configure config.status: creating graphs/directed/Makefile
> :info:configure config.status: creating graphs/undirected/Makefile
> :info:configure config.status: creating lib/Makefile
> :info:configure config.status: creating lib/cdt/Makefile
> :info:configure config.status: creating lib/cdt/libcdt.pc
> :info:configure config.status: creating lib/cgraph/Makefile
> :info:configure config.status: creating lib/cgraph/libcgraph.pc
> :info:configure config.status: creating lib/rbtree/Makefile
> :info:configure config.status: creating lib/pathplan/Makefile
> :info:configure config.status: creating lib/pathplan/libpathplan.pc
> :info:configure config.status: creating lib/ast/Makefile
> :info:configure config.status: creating lib/sfio/Makefile
> :info:configure config.status: creating lib/sfio/Sfio_f/Makefile
> :info:configure config.status: creating lib/vmalloc/Makefile
> :info:configure config.status: creating lib/dotgen/Makefile
> :info:configure config.status: creating lib/dotgen2/Makefile
> :info:configure config.status: creating lib/neatogen/Makefile
> :info:configure config.status: creating lib/fdpgen/Makefile
> :info:configure config.status: creating lib/sparse/Makefile
> :info:configure config.status: creating lib/mingle/Makefile
> :info:configure config.status: creating lib/label/Makefile
> :info:configure config.status: creating lib/sfdpgen/Makefile
> :info:configure config.status: creating lib/osage/Makefile
> :info:configure config.status: creating lib/edgepaint/Makefile
> :info:configure config.status: creating lib/gvpr/Makefile
> :info:configure config.status: creating lib/gvpr/libgvpr.pc
> :info:configure config.status: creating lib/circogen/Makefile
> :info:configure config.status: creating lib/twopigen/Makefile
> :info:configure config.status: creating lib/patchwork/Makefile
> :info:configure config.status: creating lib/pack/Makefile
> :info:configure config.status: creating lib/ortho/Makefile
> :info:configure config.status: creating lib/expr/Makefile
> :info:configure config.status: creating lib/expr/libexpr.pc
> :info:configure config.status: creating lib/common/Makefile
> :info:configure config.status: creating lib/ingraphs/Makefile
> :info:configure config.status: creating lib/vpsc/Makefile
> :info:configure config.status: creating lib/gvc/Makefile
> :info:configure config.status: creating lib/gvc/libgvc.pc
> :info:configure config.status: creating lib/xdot/Makefile
> :info:configure config.status: creating lib/xdot/libxdot.pc
> :info:configure config.status: creating lib/topfish/Makefile
> :info:configure config.status: creating lib/glcomp/Makefile
> :info:configure config.status: creating macosx/Info.plist
> :info:configure config.status: creating
> macosx/build/graphviz.pmdoc/01local.xml
> :info:configure config.status: creating
> macosx/build/graphviz.pmdoc/02graphviz.xml
> :info:configure config.status: creating windows/build/graphviz.wxs
> :info:configure config.status: creating
> windows/Properties/AssemblyInfo.cs
> :info:configure config.status: creating plugin/Makefile
> :info:configure config.status: creating plugin/core/Makefile
> :info:configure config.status: creating plugin/devil/Makefile
> :info:configure config.status: creating plugin/gd/Makefile
> :info:configure config.status: creating plugin/gdk/Makefile
> :info:configure config.status: creating plugin/gdiplus/Makefile
> :info:configure config.status: creating plugin/glitz/Makefile
> :info:configure config.status: creating plugin/gs/Makefile
> :info:configure config.status: creating plugin/gtk/Makefile
> :info:configure config.status: creating plugin/lasi/Makefile
> :info:configure config.status: creating plugin/ming/Makefile
> :info:configure config.status: creating plugin/pango/Makefile
> :info:configure config.status: creating plugin/poppler/Makefile
> :info:configure config.status: creating plugin/quartz/Makefile
> :info:configure config.status: creating plugin/rsvg/Makefile
> :info:configure config.status: creating plugin/visio/Makefile
> :info:configure config.status: creating plugin/webp/Makefile
> :info:configure config.status: creating plugin/xlib/Makefile
> :info:configure config.status: creating plugin/dot_layout/Makefile
> :info:configure config.status: creating plugin/neato_layout/Makefile
> :info:configure config.status: creating cmd/Makefile
> :info:configure config.status: creating cmd/dot/Makefile
> :info:configure config.status: creating cmd/tools/Makefile
> :info:configure config.status: creating cmd/gvpr/Makefile
> :info:configure config.status: creating cmd/gvpr/lib/Makefile
> :info:configure config.status: creating
> cmd/lefty/ws/x11/libfilereq/Makefile
> :info:configure config.status: creating cmd/lefty/ws/x11/Makefile
> :info:configure config.status: creating cmd/lefty/ws/mswin32/Makefile
> :info:configure config.status: creating cmd/lefty/ws/Makefile
> :info:configure config.status: creating cmd/lefty/os/unix/Makefile
> :info:configure config.status: creating cmd/lefty/os/mswin32/Makefile
> :info:configure config.status: creating cmd/lefty/os/Makefile
> :info:configure config.status: creating cmd/lefty/dot2l/Makefile
> :info:configure config.status: creating cmd/lefty/examples/Makefile
> :info:configure config.status: creating cmd/lefty/Makefile
> :info:configure config.status: creating cmd/lneato/Makefile
> :info:configure config.status: creating cmd/dotty/Makefile
> :info:configure config.status: creating cmd/smyrna/Makefile
> :info:configure config.status: creating cmd/gvmap/Makefile
> :info:configure config.status: creating cmd/mingle/Makefile
> :info:configure config.status: creating cmd/edgepaint/Makefile
> :info:configure config.status: creating cmd/gvedit/Makefile
> :info:configure config.status: creating cmd/gvedit/gvedit.pro
> :info:configure config.status: creating cmd/gvedit/ui/Makefile
> :info:configure config.status: creating cmd/gvedit/images/Makefile
> :info:configure config.status: creating tclpkg/Makefile
> :info:configure config.status: creating tclpkg/tclstubs/Makefile
> :info:configure config.status: creating tclpkg/tkstubs/Makefile
> :info:configure config.status: creating tclpkg/tclhandle/Makefile
> :info:configure config.status: creating tclpkg/gdtclft/Makefile
> :info:configure config.status: creating tclpkg/gdtclft/demo/Makefile
> :info:configure config.status: creating tclpkg/tcldot/Makefile
> :info:configure config.status: creating tclpkg/tcldot/demo/Makefile
> :info:configure config.status: creating tclpkg/tclpathplan/Makefile
> :info:configure config.status: creating tclpkg/tclpathplan/demo/Makefile
> :info:configure config.status: creating
> tclpkg/tclpathplan/demo/pathplan_data/Makefile
> :info:configure config.status: creating tclpkg/tkspline/Makefile
> :info:configure config.status: creating tclpkg/tkspline/demo/Makefile
> :info:configure config.status: creating tclpkg/gv/Makefile
> :info:configure config.status: creating tclpkg/gv/demo/Makefile
> :info:configure config.status: creating tclpkg/gv/META.gv
> :info:configure config.status: creating rtest/Makefile
> :info:configure config.status: creating share/Makefile
> :info:configure config.status: creating share/examples/Makefile
> :info:configure config.status: creating share/gui/Makefile
> :info:configure config.status: creating graphviz.spec
> :info:configure config.status: creating Doxyfile
> :info:configure config.status: creating config.h
> :info:configure config.status: creating lib/common/types.h
> :info:configure config.status: lib/common/types.h is unchanged
> :info:configure config.status: executing depfiles commands
> :info:configure config.status: executing libtool commands
> :info:configure === configuring in libltdl
> (/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/libltdl)
> :info:configure configure: running /bin/sh ./configure --disable-option-
> checking '--prefix=/opt/local' '--disable-silent-rules' '--with-
> codegens' '--without-devil' '--without-smyrna' '--with-digcola' '--with-
> ipsepcola' '--without-rsvg' '--with-pangocairo' '--with-lasi' '--with-
> webp' '--without-glitz' '--with-freetype2' '--with-fontconfig'
> '--without-gdk-pixbuf' '--without-ghostscript' '--without-gtk'
> '--without-gtkgl' '--without-gtkglext' '--with-gts' '--without-glade'
> '--without-gnomeui' '--without-ming' '--without-qt' '--with-quartz'
> '--disable-swig' '--disable-sharp' '--disable-guile' '--disable-io'
> '--disable-java' '--disable-lua' '--disable-ocaml' '--disable-perl'
> '--disable-php' '--disable-python' '--disable-python23' '--disable-
> python24' '--disable-python25' '--disable-r' '--disable-ruby' '--disable-
> tcl' 'CC=/usr/bin/clang' 'CFLAGS=-pipe -Os -arch x86_64'
> 'LDFLAGS=-L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64'
> 'CPPFLAGS=-I/opt/local/include' 'CXX=/usr/bin/clang++' 'CXXFLAGS=-pipe
> -Os -arch x86_64 -stdlib=libc++' 'OBJC=/usr/bin/clang' 'OBJCFLAGS=-pipe
> -Os -arch x86_64' --cache-file=/dev/null --srcdir=.
> :info:configure checking for a BSD-compatible install... /usr/bin/install
> -c
> :info:configure checking whether build environment is sane... yes
> :info:configure checking for a thread-safe mkdir -p... ../config/install-
> sh -c -d
> :info:configure checking for gawk... gawk
> :info:configure checking whether make sets $(MAKE)... yes
> :info:configure checking whether make supports nested variables... yes
> :info:configure checking whether make supports nested variables...
> (cached) yes
> :info:configure checking build system type... x86_64-apple-darwin14.1.0
> :info:configure checking host system type... x86_64-apple-darwin14.1.0
> :info:configure checking how to print strings... printf
> :info:configure checking for style of include used by make... GNU
> :info:configure checking for gcc... /usr/bin/clang
> :info:configure checking whether the C compiler works... yes
> :info:configure checking for C compiler default output file name... a.out
> :info:configure checking for suffix of executables...
> :info:configure checking whether we are cross compiling... no
> :info:configure checking for suffix of object files... o
> :info:configure checking whether we are using the GNU C compiler... yes
> :info:configure checking whether /usr/bin/clang accepts -g... yes
> :info:configure checking for /usr/bin/clang option to accept ISO C89...
> none needed
> :info:configure checking whether /usr/bin/clang understands -c and -o
> together... yes
> :info:configure checking dependency style of /usr/bin/clang... gcc3
> :info:configure checking for a sed that does not truncate output...
> /usr/bin/sed
> :info:configure checking for grep that handles long lines and -e...
> /usr/bin/grep
> :info:configure checking for egrep... /usr/bin/grep -E
> :info:configure checking for fgrep... /usr/bin/grep -F
> :info:configure checking for ld used by /usr/bin/clang...
> /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
> :info:configure checking if the linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> is GNU ld... no
> :info:configure checking for BSD- or MS-compatible name lister (nm)...
> /opt/local/bin/nm
> :info:configure checking the name lister (/opt/local/bin/nm) interface...
> BSD nm
> :info:configure checking whether ln -s works... yes
> :info:configure checking the maximum length of command line arguments...
> 196608
> :info:configure checking how to convert x86_64-apple-darwin14.1.0 file
> names to x86_64-apple-darwin14.1.0 format... func_convert_file_noop
> :info:configure checking how to convert x86_64-apple-darwin14.1.0 file
> names to toolchain format... func_convert_file_noop
> :info:configure checking for
> /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
> option to reload object files... -r
> :info:configure checking for objdump... no
> :info:configure checking how to recognize dependent libraries... pass_all
> :info:configure checking for dlltool... no
> :info:configure checking how to associate runtime and link libraries...
> printf %s\n
> :info:configure checking for ar... ar
> :info:configure checking for archiver @FILE support... no
> :info:configure checking for strip... strip
> :info:configure checking for ranlib... ranlib
> :info:configure checking command to parse /opt/local/bin/nm output from
> /usr/bin/clang object... ok
> :info:configure checking for sysroot... no
> :info:configure checking for a working dd... /bin/dd
> :info:configure checking how to truncate binary pipes... /bin/dd bs=4096
> count=1
> :info:configure checking for mt... no
> :info:configure checking if : is a manifest tool... no
> :info:configure checking for dsymutil... dsymutil
> :info:configure checking for nmedit... nmedit
> :info:configure checking for lipo... lipo
> :info:configure checking for otool... otool
> :info:configure checking for otool64... no
> :info:configure checking for -single_module linker flag... yes
> :info:configure checking for -exported_symbols_list linker flag... yes
> :info:configure checking for -force_load linker flag... yes
> :info:configure checking how to run the C preprocessor... /usr/bin/clang
> -E
> :info:configure checking for ANSI C header files... yes
> :info:configure checking for sys/types.h... yes
> :info:configure checking for sys/stat.h... yes
> :info:configure checking for stdlib.h... yes
> :info:configure checking for string.h... yes
> :info:configure checking for memory.h... yes
> :info:configure checking for strings.h... yes
> :info:configure checking for inttypes.h... yes
> :info:configure checking for stdint.h... yes
> :info:configure checking for unistd.h... yes
> :info:configure checking for dlfcn.h... yes
> :info:configure checking for objdir... .libs
> :info:configure checking if /usr/bin/clang supports -fno-rtti -fno-
> exceptions... yes
> :info:configure checking for /usr/bin/clang option to produce PIC...
> -fno-common -DPIC
> :info:configure checking if /usr/bin/clang PIC flag -fno-common -DPIC
> works... yes
> :info:configure checking if /usr/bin/clang static flag -static works...
> no
> :info:configure checking if /usr/bin/clang supports -c -o file.o... yes
> :info:configure checking if /usr/bin/clang supports -c -o file.o...
> (cached) yes
> :info:configure checking whether the /usr/bin/clang linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> supports shared libraries... yes
> :info:configure checking dynamic linker characteristics... darwin14.1.0
> dyld
> :info:configure checking how to hardcode library paths into programs...
> immediate
> :info:configure checking for dlopen in -ldl... yes
> :info:configure checking whether a program can dlopen itself... yes
> :info:configure checking whether a statically linked program can dlopen
> itself... yes
> :info:configure checking whether stripping libraries is possible... yes
> :info:configure checking if libtool supports shared libraries... yes
> :info:configure checking whether to build shared libraries... yes
> :info:configure checking whether to build static libraries... yes
> :info:configure checking what extension is used for runtime loadable
> modules... .so
> :info:configure checking what variable specifies run-time module search
> path... DYLD_LIBRARY_PATH
> :info:configure checking for the default library search path...
> /usr/local/lib /lib /usr/lib
> :info:configure checking for library containing dlopen... none required
> :info:configure checking for dlerror... yes
> :info:configure checking for shl_load... no
> :info:configure checking for shl_load in -ldld... no
> :info:configure checking for dld_link in -ldld... no
> :info:configure checking for _ prefix in compiled symbols... yes
> :info:configure checking whether we have to add an underscore for
> dlsym... no
> :info:configure checking whether deplibs are loaded by dlopen... yes
> :info:configure checking for argz.h... no
> :info:configure checking for error_t... no
> :info:configure checking for argz_add... no
> :info:configure checking for argz_append... no
> :info:configure checking for argz_count... no
> :info:configure checking for argz_create_sep... no
> :info:configure checking for argz_insert... no
> :info:configure checking for argz_next... no
> :info:configure checking for argz_stringify... no
> :info:configure checking whether libtool supports -dlopen/-dlpreopen...
> yes
> :info:configure checking for unistd.h... (cached) yes
> :info:configure checking for dl.h... no
> :info:configure checking for sys/dl.h... no
> :info:configure checking for dld.h... no
> :info:configure checking for mach-o/dyld.h... yes
> :info:configure checking for dirent.h... yes
> :info:configure checking for closedir... yes
> :info:configure checking for opendir... yes
> :info:configure checking for readdir... yes
> :info:configure checking for strlcat... yes
> :info:configure checking for strlcpy... yes
> :info:configure checking that generated files are newer than configure...
> done
> :info:configure configure: creating ./config.status
> :info:configure config.status: creating Makefile
> :info:configure config.status: creating config.h
> :info:configure config.status: executing depfiles commands
> :info:configure config.status: executing libtool commands
> :info:configure
> :info:configure
> ----------------------------------------------------------------
> :info:configure
> :info:configure graphviz-2.38.0 will be compiled with the following:
> :info:configure
> :info:configure options:
> :info:configure cgraph:
> :info:configure digcola: Yes
> :info:configure expat: Yes
> :info:configure fontconfig: Yes
> :info:configure freetype: Yes
> :info:configure glut: No (missing GL/glut.h)
> :info:configure ann: No (ANN library not available)
> :info:configure gts: Yes
> :info:configure ipsepcola: Yes
> :info:configure ltdl: Yes
> :info:configure ortho: Yes
> :info:configure sfdp: Yes
> :info:configure shared: Yes
> :info:configure static: No (disabled by default)
> :info:configure qt: No (disabled)
> :info:configure x: Yes
> :info:configure
> :info:configure commands:
> :info:configure dot: Yes (always enabled)
> :info:configure neato: Yes (always enabled)
> :info:configure fdp: Yes (always enabled)
> :info:configure circo: Yes (always enabled)
> :info:configure twopi: Yes (always enabled)
> :info:configure gvpr: Yes (always enabled)
> :info:configure gvmap: Yes (always enabled)
> :info:configure lefty: Yes
> :info:configure smyrna: No (disabled by default - experimental)
> :info:configure gvedit: No (disabled)
> :info:configure
> :info:configure plugin libraries:
> :info:configure dot_layout: Yes (always enabled)
> :info:configure neato_layout: Yes (always enabled)
> :info:configure core: Yes (always enabled)
> :info:configure devil: No (disabled)
> :info:configure gd: Yes
> :info:configure gdiplus: No (disabled by default - Windows only)
> :info:configure gdk: Yes
> :info:configure gdk_pixbuf: No (disabled)
> :info:configure ghostscript: No (disabled)
> :info:configure glitz: No (disabled by default - incomplete)
> :info:configure gtk: No (disabled)
> :info:configure lasi: Yes
> :info:configure ming: No (disabled by default - incomplete)
> :info:configure pangocairo: Yes
> :info:configure poppler: Yes
> :info:configure quartz: Yes
> :info:configure rsvg: No (disabled)
> :info:configure visio: No (disabled by default - experimental)
> :info:configure webp: Yes
> :info:configure xlib: Yes
> :info:configure
> :info:configure language extensions:
> :info:configure gv_sharp: No (disabled)
> :info:configure gv_go: No (disabled by default - experimental)
> :info:configure gv_guile: No (disabled)
> :info:configure gv_io: No (disabled by default - no swig
> support yet)
> :info:configure gv_java: No (disabled)
> :info:configure gv_lua: No (disabled)
> :info:configure gv_ocaml: No (disabled)
> :info:configure gv_perl: No (disabled)
> :info:configure gv_php: No (disabled)
> :info:configure gv_python: No (disabled)
> :info:configure gv_python23: No (disabled by default - for
> multiversion installs)
> :info:configure gv_python24: No (disabled by default - for
> multiversion installs)
> :info:configure gv_python25: No (disabled by default - for
> multiversion installs)
> :info:configure gv_python26: No (disabled by default - for
> multiversion installs)
> :info:configure gv_python27: No (disabled by default - for
> multiversion installs)
> :info:configure gv_R: No (disabled)
> :info:configure gv_ruby: No (disabled)
> :info:configure gv_tcl: No (tcl not available)
> :info:configure
> :info:configure tcldot: No (tcl not available)
> :info:configure tclpathplan: No (tcl not available)
> :info:configure gdtclft: No (tcl not available)
> :info:configure tkspline: No (tk not available)
> :debug:configure Privilege de-escalation not attempted as not running as
> root.
> :debug:build build phase started at Fri Jan 30 08:40:52 CET 2015
> :notice:build ---> Building graphviz
> :debug:build Executing proc-pre-org.macports.build-build-0
> :debug:build Executing org.macports.build (graphviz)
> :debug:build Environment:
> CC_PRINT_OPTIONS='YES'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/.CC_PRINT_OPTIONS'
> CPATH='/opt/local/include'
> LIBRARY_PATH='/opt/local/lib'
> MACOSX_DEPLOYMENT_TARGET='10.10'
> :debug:build Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0"
> && /usr/bin/make -j8 -w all'
> :debug:build Executing command line: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0"
> && /usr/bin/make -j8 -w all
> :info:build make: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0'
> :info:build /usr/bin/grep 'PACKAGE\|VERSION\|GVPLUGIN' config.h >
> ./graphviz_version.h
> :info:build /Applications/Xcode.app/Contents/Developer/usr/bin/make all-
> recursive
> :info:build make[1]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0'
> :info:build Making all in libltdl
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/libltdl'
> :info:build cd . && /bin/sh
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/config/missing
> automake-1.14 --foreign
> :info:build
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/config/missing:
> line 81: automake-1.14: command not found
> :info:build WARNING: 'automake-1.14' is missing on your system.
> :info:build You should only need it if you modified
> 'Makefile.am' or
> :info:build 'configure.ac' or m4 files included by
> 'configure.ac'.
> :info:build The 'automake' program is part of the GNU Automake
> package:
> :info:build <http://www.gnu.org/software/automake>
> :info:build It also requires GNU Autoconf, GNU m4 and Perl in
> order to run:
> :info:build <http://www.gnu.org/software/autoconf>
> :info:build <http://www.gnu.org/software/m4/>
> :info:build <http://www.perl.org/>
> :info:build make[2]: *** [Makefile.in] Error 1
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0/libltdl'
> :info:build make[1]: *** [all-recursive] Error 1
> :info:build make[1]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0'
> :info:build make: *** [all] Error 2
> :info:build make: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0'
> :info:build Command failed: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/work/graphviz-2.38.0"
> && /usr/bin/make -j8 -w all
> :info:build Exit code: 2
> :error:build org.macports.build for port graphviz returned: command
> execution failed
> :debug:build Error code: CHILDSTATUS 8937 2
> :debug:build Backtrace: command execution failed
> while executing
> "system -nice 0 $fullcmdstring"
> ("eval" body line 1)
> invoked from within
> "eval system $notty $nice \$fullcmdstring"
> invoked from within
> "command_exec build"
> (procedure "portbuild::build_main" line 8)
> invoked from within
> "portbuild::build_main org.macports.build"
> ("eval" body line 1)
> invoked from within
> "eval $procedure $targetname"
> :info:build Warning: targets not executed for graphviz:
> org.macports.activate org.macports.build org.macports.destroot
> org.macports.install
> :notice:build Please see the log file for port graphviz for details:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/main.log
> }}}
New description:
I'm getting the following error log:
attachment:main.log
--
Comment:
We prefer if you would attach large amounts of output rather than pasting
it; makes it easier to scroll through a ticket.
--
Ticket URL: <https://trac.macports.org/ticket/46710#comment:1>
MacPorts <https://www.macports.org/>
Ports system for OS X
More information about the macports-tickets
mailing list